SAMURAI - NIMS Researchers Database

HOME > プロフィール > 大村 孝仁

[論文] | [書籍] | [会議録] | [口頭発表] | [その他の文献] | [公開特許出願]

論文 TSV

2023
  1. M. Wakeda, T. Osada, T. Ohmura. Atomistic analysis of temperature-dependent dislocation dynamics in Ni3Al-based intermetallic alloys. Materials Today Communications. 37 (2023) 106987 10.1016/j.mtcomm.2023.106987
  2. Silvia Pomes, Nozomu Adachi, Masato Wakeda, Takahito Ohmura. Probing pre-serration deformation in Zr-based bulk metallic glass via nanoindentation testing. Scripta Materialia. 237 (2023) 115713 10.1016/j.scriptamat.2023.115713
  3. Masato Wakeda, Takahito Ohmura. Atomistic evaluation of the dislocation transmission across tilt and twist low-angle grain boundaries in body-centered cubic iron. Computational Materials Science. 228 (2023) 112335 10.1016/j.commatsci.2023.112335 Open Access
  4. Tsai-Fu Chung, Shan-Qiao Lin, Hongxing Li, Chien-Nan Hsiao, Jer-Ren Yang, Cheng-Si Tsao, Takahito Ohmura. Microstructure evolution and shearing behaviour of δꞌ/θꞌ/δꞌ precipitates in an aged Al-Cu-Li-Mg aluminium alloy. Journal of Alloys and Compounds. 953 (2023) 170095 10.1016/j.jallcom.2023.170095
  5. Hayato Anetai, Yoshitaka Matsushita, Takahito Ohmura, Masayuki Takeuchi. Mechanically Flexible Crystals of Benzene Derivatives with Halogen or Methyl Groups. Crystal Growth & Design. 23 [6] (2023) 4025-4031 10.1021/acs.cgd.2c01394
  6. Hidetoshi Somekawa, Kei Nishikawa, Taku Moronaga, Takahito Ohmura. Fabrication of Li anode metal via bulk mechanical property analysis. Journal of Power Sources. 569 (2023) 233019 10.1016/j.jpowsour.2023.233019
  7. Yuichi Hirai, Stann Van Baaren, Takahito Ohmura, Takayuki Nakanishi, Takashi Takeda, Yuichi Kitagawa, Yasuchika Hasegawa, Rémi Métivier, Clémence Allain. Bright Lanthanide III Triboluminescence despite Low Photoluminescence, and Dual Triboluminescence and Mechano‐Responsive Photoluminescence. Advanced Optical Materials. 11 [9] (2023) 2203139 10.1002/adom.202203139 Open Access
  8. Yanxu Wang, Yo Tomota, Takahito Ohmura, Wu Gong, Stefanus Harjo. Evolution of austenite lattice parameter during isothermal transformation in a 0.4 C low alloyed steel. Materialia. 27 (2023) 101685 10.1016/j.mtla.2023.101685
  9. 大村 孝仁, 譯田 真人. 微小領域の力学挙動解析と塑性現象のモデリング ― 第1報 転位―粒界相互作用の考察 ―. 日本金属学会誌. 87 [2] (2023) J2022025 10.2320/jinstmet.j2022025 Open Access
  10. Viola Paul, Kei Ameyama, Mie Ota-Kawabata, Takahito Ohmura. Evaluation of Deformation and Fracture Behavior in 304L Austenitic Steel Harmonic Structures through Nanoindentation. steel research international. 94 [2] (2023) 10.1002/srin.202200354
  11. 大村 孝仁, 譯田 真人. 微小領域の力学挙動解析と塑性現象のモデリング ― 第2報 多様な格子欠陥による強化機構の考察 ―. 日本金属学会誌. 87 [2] (2023) 45-55 10.2320/jinstmet.j2022026 Open Access
2022
  1. Mazaya Najmina, Mitsuhiro Ebara, Takahito Ohmura, Koichiro Uto. Viscoelastic Liquid Matrix with Faster Bulk Relaxation Time Reinforces the Cell Cycle Arrest Induction of the Breast Cancer Cells via Oxidative Stress. International Journal of Molecular Sciences. 23 [23] (2022) 14637 10.3390/ijms232314637 Open Access
  2. 安田 武司, 正瑞 来夢, 西本 浩司, 奥本 良博, 大村 孝仁. 炭素鋼におけるスポット状レーザ焼入れ部の組織とナノ硬さの関係. 鉄と鋼. 108 [7] (2022) 405-416 10.2355/tetsutohagane.tetsu-2021-090 Open Access
  3. Viola Paul, Yanxu Wang, Kei Ameyama, Mie Ota-Kawabata, Takahito Ohmura. Nanomechanical Analysis of SUS304L Stainless Steel with Bimodal Distribution in Grain Size. MATERIALS TRANSACTIONS. 63 [4] (2022) MT-M2021187 10.2320/matertrans.mt-m2021187
  4. Chiharu Kura, Masato Wakeda, Kazushi Hayashi, Takahito Ohmura. Energetic and atomic structural analyses of the screw dislocation absorption at tilt grain boundaries in BCC-Fe. Scientific Reports. 12 [1] (2022) 21301 10.1038/s41598-022-25066-9 Open Access
  5. Seiichiro Ii, Takero Enami, Takahito Ohmura, Sadahiro Tsurekawa. Direct measurement of shear stress for dislocation transferring across {111} Σ3 grain boundary in aluminum bicrystal via in situ straining TEM. Scripta Materialia. 221 (2022) 114953 10.1016/j.scriptamat.2022.114953
  6. Michael Pagan, Takahito Ohmura, Ling Wang, Steven Zinkle, S. S. Babu. Strengthening Effects at Dissimilar Metal Interfaces Created by Ultrasonic Additive Manufacturing. Metallurgical and Materials Transactions A. 53 [10] (2022) 3547-3564 10.1007/s11661-022-06776-1
  7. Kwangsik Kwak, Yoji Mine, Shigekazu Morito, Takahito Ohmura, Kazuki Takashima. Correlation between strength and hardness for substructures of lath martensite in low- and medium-carbon steels. Materials Science and Engineering: A. 856 (2022) 144007 10.1016/j.msea.2022.144007
  8. Kenta Goto, Ayako Ikeda, Toshio Osada, Ikumu Watanabe, Kyoko Kawagishi, Takahito Ohmura. High-throughput evaluation of stress–strain relationships in Ni–Co–Cr ternary systems via indentation testing of diffusion couples. Journal of Alloys and Compounds. 910 (2022) 164868 10.1016/j.jallcom.2022.164868 Open Access
  9. Yeonju Oh, Won-Seok Ko, Nojun Kwak, Jae-il Jang, Takahito Ohmura, Heung Nam Han. Small-scale analysis of brittle-to-ductile transition behavior in pure tungsten. Journal of Materials Science & Technology. 105 (2022) 242-258 10.1016/j.jmst.2021.07.024
  10. Hongxing Li, Seiichiro Ii, Nobuhiro Tsuji, Takahito Ohmura. Direct observation of grain boundary formation in bcc iron through TEM in situ compression test. Scripta Materialia. 207 (2022) 114275 10.1016/j.scriptamat.2021.114275
2021
  1. Rintaro Ueji, Yuuji Kimura, Kohsaku Ushioda, Takahito Ohmura, Tadanobu Inoue. Bainite Transformation and Resultant Tensile Properties of 0.6%C Low Alloyed Steels with Different Prior Austenite Grain Sizes. ISIJ International. 61 [2] (2021) 582-590 10.2355/isijinternational.isijint-2020-389 Open Access
  2. Takahito Ohmura. Recent Advances in Indentation Techniques and Their Application to Mechanical Characterization. MATERIALS TRANSACTIONS. 62 [4] (2021) 563-569 10.2320/matertrans.mt-m2020371
  3. Kazuki Endoh, Seiichiro Ii, Yuuji Kimura, Taisuke Sasaki, Sota Goto, Takeshi Yokota, Takahito Ohmura. Effects of Grain Boundary Geometry and Boron Addition on the Local Mechanical Behavior of Interstitial-Free (IF) Steels. MATERIALS TRANSACTIONS. 62 [10] (2021) MT-M2021128 10.2320/matertrans.mt-m2021128
  4. Katsuya Nakano, Kengo Takeda, Seiichiro Ii, Takahito Ohmura. Evaluation of Grain Boundary Strength through Nanoindentation Technique. Journal of the Japan Institute of Metals and Materials. 85 [1] (2021) 40-48 10.2320/jinstmet.jd202006 Open Access
  5. 遠藤 一輝, 井 誠一郎, 木村 勇次, 佐々木 泰祐, 後藤 聡太, 横田 毅, 大村 孝仁. Interstitial Free鋼の粒界近傍における局所力学特性に及ぼす幾何学因子およびB添加の影響. 日本金属学会誌. 85 [1] (2021) 30-39 10.2320/jinstmet.jd202005 Open Access
  6. Masato Wakeda, Ya-Ling Chang, Seiichiro Ii, Takahito Ohmura. Multiscale analyses of the interaction between dislocation and Σ9 symmetric tilt grain boundaries in Fe–Si bicrystals by nanoindentation technique. International Journal of Plasticity. 145 (2021) 103047 10.1016/j.ijplas.2021.103047
  7. Fei Shen Ong, Bastian Rheingans, Kenta Goto, Hirobumi Tobe, Takahito Ohmura, Jolanta Janczak-Rusch, Eiichi Sato. Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: The effects of brazing zone’s elasto-plasticity and ceramics' intrinsic properties. Journal of the European Ceramic Society. 41 [13] (2021) 6319-6329 10.1016/j.jeurceramsoc.2021.06.038
  8. Viola Paul, Masato Wakeda, Kei Ameyama, Mie Ota-Kawabata, Takahito Ohmura. Local Deformation Behavior of the Copper Harmonic Structure near Grain Boundaries Investigated through Nanoindentation. Materials. 14 [19] (2021) 5663 10.3390/ma14195663 Open Access
  9. Nozomu Adachi, Takuya Suzuki, Takahito Ohmura, Yoshikazu Todaka. Analytical approach for pop-in and post-pop-in deformation behavior during nanoindentation: effect of solute Si in interstitial free steel. Journal of Materials Research. 36 [12] (2021) 2571-2581 10.1557/s43578-021-00136-2
  10. Nozomu Adachi, Yoshikazu Todaka, Takahito Ohmura. Macroscopic viscoelastic deformation at room temperature in mechanically rejuvenated Zr-based metallic glass. MRS Communications. 11 [3] (2021) 330-335 10.1557/s43579-021-00023-1
  11. Jovana Ruzic, Kenta Goto, Ikumu Watanabe, Toshio Osada, Liberty Wu, Takahito Ohmura. Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys. Materials Science and Engineering: A. 818 (2021) 141439 10.1016/j.msea.2021.141439
  12. Takahito Ohmura, Masato Wakeda. Pop-In Phenomenon as a Fundamental Plasticity Probed by Nanoindentation Technique. Materials. 14 [8] (2021) 1879 10.3390/ma14081879 Open Access
  13. Seiichiro Ii, Takero Enami, Takahito Ohmura, Sadahiro Tsurekawa. Direct Characterization of the Relation between the Mechanical Response and Microstructure Evolution in Aluminum by Transmission Electron Microscopy In Situ Straining. Materials. 14 [6] (2021) 1431 10.3390/ma14061431 Open Access
  14. R Ueji, Y Kimura, K Ushioda, T Ohmura, T Inoue, A Shibata. Orientation dependence of transformation induced plasticity in high carbon bainitic steel. IOP Conference Series: Materials Science and Engineering. (2021) 012022 10.1088/1757-899x/1121/1/012022 Open Access
  15. Hongxing Li, Si Gao, Yo Tomota, Seiichiro Ii, Nobuhiro Tsuji, Takahito Ohmura. Mechanical response of dislocation interaction with grain boundary in ultrafine-grained interstitial-free steel. Acta Materialia. 206 (2021) 116621 10.1016/j.actamat.2021.116621
  16. Rintaro Ueji, Akinobu Shibata, Kohsaku Ushioda, Yuuji Kimura, Takahito Ohmura, Tadanobu Inoue. Crystallographic orientation dependence of deformation-induced martensitic transformation of 1.3 GPa-class 0.6 %C bainitic steel with retained austenite. Scripta Materialia. 194 (2021) 113666 10.1016/j.scriptamat.2020.113666
  17. Hiroshi Masuda, Koji Morita, Makoto Watanabe, Toru Hara, Hidehiro Yoshida, Takahito Ohmura. Ferroelastic and plastic behaviors in pseudo-single crystal micropillars of nontransformable tetragonal zirconia. Acta Materialia. 203 (2021) 116471 10.1016/j.actamat.2020.11.013 Open Access
2020
  1. 木村 拓也, 倉本 繁, 仲川 枝里, 大村 孝仁. β型チタン合金の局所的力学挙動に及ぼす相安定性の影響. 軽金属. 70 [9] (2020) 429-431 10.2464/jilm.70.429 Open Access
  2. 友田 陽, 王 延緒, 大村 孝仁, 関戸 信彰, ハルヨ ステファヌス, 川崎 卓郎, 龔 武, 谷山 明. 1.5Mn-1.5Si-0.2C鋼におけるフェライト-パーライト変態その場中性子回折. 鉄と鋼. 106 [5] (2020) 262-271 10.2355/tetsutohagane.tetsu-2019-106 Open Access
  3. Katsuya Nakano, Takahito Ohmura. Effect of Solute Carbon on Onset of Local Plastic Deformation in BCC Iron. Tetsu-to-Hagane. 106 [6] (2020) 372-381 10.2355/tetsutohagane.tetsu-2019-095 Open Access
  4. Yuji Sato, Shuhei Shinzato, Takahito Ohmura, Takahiro Hatano, Shigenobu Ogata. Unique universal scaling in nanoindentation pop-ins. Nature Communications. 11 [1] (2020) 10.1038/s41467-020-17918-7 Open Access
  5. Yuto Funamori, Ryo Suzuki, Takatsugu Wakahara, Takahito Ohmura, Eri Nakagawa, Masaru Tachibana. Large elastic deformation of C60 nanowhiskers. Carbon. 169 (2020) 65-72
  6. Kenta Goto, Ikumu Watanabe, Takahito Ohmura. Inverse estimation approach for elastoplastic properties using the load-displacement curve and pile-up topography of a single Berkovich indentation. Materials & Design. 194 (2020) 108925 10.1016/j.matdes.2020.108925 Open Access
  7. Yanxu Wang, Yo Tomota, Takahito Ohmura, Wu Gong, Stefanus Harjo, Masahiko Tanaka. Continuous and discontinuous yielding behaviors in ferrite-cementite steels. Acta Materialia. 196 (2020) 565-575 10.1016/j.actamat.2020.07.017
  8. Giovanni Maizza, Renato Pero, Frediano De Marco, Takahito Ohmura. Correlation Between the Indentation Properties and Microstructure of Dissimilar Capacitor Discharge Welded WC-Co/High-Speed Steel Joints. Materials. 13 [11] (2020) 2657 10.3390/ma13112657 Open Access
  9. Tinghui Man, Takahito Ohmura, Yo Tomota. The effect of boundary or interface on stress-induced martensitic transformation in a Fe-Ni alloy. Materials Today Communications. 23 (2020) 100896 10.1016/j.mtcomm.2020.100896
  10. Renato Pero, Giovanni Maizza, Roberto Montanari, Takahito Ohmura. Nano-Indentation Properties of Tungsten Carbide-Cobalt Composites as a Function of Tungsten Carbide Crystal Orientation. Materials. 13 [9] (2020) 2137 10.3390/ma13092137 Open Access
  11. Y. Tomota, T. Murakami, Y.X. Wang, T. Ohmura, S. Harjo, Y.H. Su, T. Shinohara. Influence of carbon concentration and magnetic transition on the austenite lattice parameter of 30Mn-C steel. Materials Characterization. 163 (2020) 110243 10.1016/j.matchar.2020.110243
  12. Hiroshi Masuda, Koji Morita, Takahito Ohmura. Nanoindentation-induced plasticity in cubic zirconia up to 500 °C. Acta Materialia. 184 (2020) 59-68 10.1016/j.actamat.2019.11.028
  13. Yanxu Wang, Yo Tomota, Takahito Ohmura, Satoshi Morooka, Wu Gong, Stefanus Harjo. Real time observation of martensite transformation for a 0.4C low alloyed steel by neutron diffraction. Acta Materialia. 184 (2020) 30-40 10.1016/j.actamat.2019.11.051
  14. Toshio Osada, Toru Hara, Masanori Mitome, Shingo Ozaki, Taichi Abe, Kiichi Kamoda, Takahito Ohmura. Self-healing by design: universal kinetic model of strength recovery in self-healing ceramics. Science and Technology of Advanced Materials. 21 [1] (2020) 593-608 10.1080/14686996.2020.1796468 Open Access
2019
  1. Jovana Ruzic, Ikumu Watanabe, Kenta Goto, Takahito Ohmura. Nano-Indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere. MATERIALS TRANSACTIONS. 60 [8] (2019) 1411-1415 10.2320/matertrans.md201909 Open Access
  2. Tinghui Man, Takahito Ohmura, Yo Tomota. Mechanical Behavior of Individual Retained Austenite Grains in High Carbon Quenched-tempered Steel. ISIJ International. 59 [3] (2019) 559-566 10.2355/isijinternational.isijint-2018-620 Open Access
  3. Renato Pero, Giovanni Maizza, Frediano De Marco, Piero De Fazio, Roberto Montanari, Takahito Ohmura. Determination of the Yield Radius and Yield Stress in 2198-T3 Aluminum Alloy by Means of the Dual-Scale Instrumented Indentation Test. MATERIALS TRANSACTIONS. 60 [8] (2019) 1450-1456 10.2320/matertrans.mt-md2019010
  4. 小野瀨 航平, 倉本 繁, 鈴木 拓哉, Ya-Ling CHANG, 仲川 枝里, 大村 孝仁, 岩本 知広. TEM内その場観察による ベータ型チタン合金の変形挙動解析. Journal of Japan Institute of Light Metals. 69 [5] (2019) 273-280 10.2464/jilm.69.273 Open Access
  5. Yuji Sato, Shuhei Shinzato, Takahito Ohmura, Shigenobu Ogata. Atomistic prediction of the temperature- and loading-rate-dependent first pop-in load in nanoindentation. International Journal of Plasticity. 121 (2019) 280-292 10.1016/j.ijplas.2019.06.012
  6. G. Maizza, H. Eom, M. Lee, T. H. Yim, E. Nakagawa, R. Pero, T. Ohmura. Mechanical and fracture behaviour of the three-scale hierarchy structure in As-deposited and annealed nanocrystalline electrodeposited Ni–Fe alloys. Journal of Materials Science. 54 [20] (2019) 13378-13393 10.1007/s10853-019-03835-8
  7. S. Araki, K. Mashima, T. Masumura, T. Tsuchiyama, S. Takaki, T. Ohmura. Effect of grain boundary segregation of carbon on critical grain boundary strength of ferritic steel. Scripta Materialia. 169 (2019) 38-41 10.1016/j.scriptamat.2019.05.001
  8. Kenta Goto, Ikumu Watanabe, Takahito Ohmura. Determining suitable parameters for inverse estimation of plastic properties based on indentation marks. International Journal of Plasticity. 116 (2019) 81-90 10.1016/j.ijplas.2018.12.007
  9. Dai‐Ming Tang, Cui‐Lan Ren, Ling Zhang, Ying Tao, Peng Zhang, Wei Lv, Xiang‐Ling Jia, Xiaojuan Jiang, Guangmin Zhou, Takahito Ohmura, Ping Huai, Feng Li, Yoshio Bando, Dmitri Golberg, Quan‐Hong Yang. Size Effects on the Mechanical Properties of Nanoporous Graphene Networks. Advanced Functional Materials. 29 [19] (2019) 1900311 10.1002/adfm.201900311
  10. Ming-Yuan Gao, Shao-Pu Tsai, Jer-Ren Yang, Ya-Ling Chang, Takahito Ohmura, Chih-Yuan Chen, Shing-Hoa Wang, Yuan-Tsung Wang, Ching-Yuan Huang. In-situ transmission electron microscopy investigation of compressive deformation in interphase-precipitated carbide-strengthened α-iron single-crystal nanopillars. Materials Science and Engineering: A. 746 (2019) 406-415 10.1016/j.msea.2018.12.055
2018
  1. Yusuke Wada, Nobuaki Sekido, Takahito Ohmura, Kyosuke Yoshimi. Deformation Microstructure Developed by Nanoindentation of a MAX Phase Ti2AlC. MATERIALS TRANSACTIONS. 59 [5] (2018) 771-778 10.2320/matertrans.mbw201703
  2. Satoshi Araki, Kohei Fujii, Daichi Akama, Toshihiro Tsuchiyama, Setsuo Takaki, Takahito Ohmura, Jun Takahashi. Effect of Low Temperature Aging on Hall-Petch Coefficient in Ferritic Steels Containing a Small Amount of Carbon and Nitrogen. ISIJ International. 58 [10] (2018) 1920-1926 10.2355/isijinternational.isijint-2018-130 Open Access
  3. 和田 悠佑, 関戸 信彰, 大村 孝仁, 吉見 享祐. MAX相Ti2AlCにおける塑性変形開始挙動の圧入方位依存性. 日本金属学会誌. 82 [5] (2018) 162-168 10.2320/jinstmet.j2017042 Open Access
  4. Yongjie Zhang, Kunio Shinbo, Takahito Ohmura, Takuya Suzuki, Kaneaki Tsuzaki, Goro Miyamoto, Tadashi Furuhara. Randomization of Ferrite/austenite Orientation Relationship and Resultant Hardness Increment by Nitrogen Addition in Vanadium-microalloyed Low Carbon Steels Strengthened by Interphase Precipitation. ISIJ International. 58 [3] (2018) 542-550 10.2355/isijinternational.isijint-2017-537 Open Access
  5. X. Liu, T. H. Man, J. Yin, X. Lu, S. Q. Guo, T. Ohmura, D. H. Ping. In situ heating TEM observations on carbide formation and α-Fe recrystallization in twinned martensite. Scientific Reports. 8 [1] (2018) 10.1038/s41598-018-32896-z Open Access
  6. Ryo Onodera, Sanki Asakawa, Ryosuke Segawa, Natsumi Mizuno, Kouetsu Ogasawara, Masahiro Hiratsuka, Noriyasu Hirasawa. Zinc ions have a potential to attenuate both Ni ion uptake and Ni ion-induced inflammation. Scientific Reports. 8 [1] (2018) 10.1038/s41598-018-21014-8 Open Access
  7. Tsai-Fu Chung, Yo-Lun Yang, Chien-Nan Hsiao, Wei-Chih Li, Bo-Ming Huang, Cheng-Si Tsao, Zhusheng Shi, Jianguo Lin, Paul E. Fischione, Takahito Ohmura, Jer-Ren Yang. Morphological evolution of GP zones and nanometer-sized precipitates in the AA2050 aluminium alloy. International Journal of Lightweight Materials and Manufacture. 1 [3] (2018) 142-156 10.1016/j.ijlmm.2018.06.002 Open Access
  8. Tsai-Fu Chung, Yo-Lun Yang, Bo-Ming Huang, Zhusheng Shi, Jianguo Lin, Takahito Ohmura, Jer-Ren Yang. Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloy. Acta Materialia. 149 (2018) 377-387 10.1016/j.actamat.2018.02.045
  9. T. W. Liu, D. H. Ping, T. Ohmura, M. Ohnuma. Electron diffraction analysis of quenched Fe–C martensite. Journal of Materials Science. 53 [4] (2018) 2976-2984 10.1007/s10853-017-1731-0
  10. T.H. Man, T.W. Liu, D.H. Ping, T. Ohmura. TEM investigations on lath martensite substructure in quenched Fe-0.2C alloys. Materials Characterization. 135 (2018) 175-182 10.1016/j.matchar.2017.11.039
  11. Dehai Ping, Alok Singh, Shuqi Guo, Takahito Ohmura, Masato Ohnuma, Taichi Abe, Hidehiro Onodera. A Simple Method for Observing ω-Fe Electron Diffraction Spots from <112>α-Fe Directions of Quenched Fe–C Twinned Martensite. ISIJ International. 58 [1] (2018) 159-164 10.2355/isijinternational.isijint-2017-270 Open Access
2017
  1. Toshio Osada, Kiichi Kamoda, Masanori Mitome, Toru Hara, Taichi Abe, Yuki Tamagawa, Wataru Nakao, Takahito Ohmura. A Novel Design Approach for Self-Crack-Healing Structural Ceramics with 3D Networks of Healing Activator. Scientific Reports. 7 [1] (2017) 17853 10.1038/s41598-017-17942-6 Open Access
  2. Yanxu Wang, Takahisa Ohnuki, Yo Tomota, Stefanus Harjo, Takahito Ohmura. Multi-scaled heterogeneous deformation behavior of pearlite steel studied by in situ neutron diffraction. Scripta Materialia. 140 (2017) 45-49 10.1016/j.scriptamat.2017.07.004
  3. Nobuaki Sekido, Takahito Ohmura, John H. Perepezko. Mechanical properties and dislocation character of YB 4 and YB 6. Intermetallics. 89 (2017) 86-91 10.1016/j.intermet.2017.05.024 Open Access
  4. 荒木 理, 藤井 浩平, 赤間 大地, 土山 聡宏, 高木 節雄, 大村 孝仁, 高橋 淳. 微量炭素・窒素を添加したフェライト鋼のHall-Petch係数に及ぼす低温時効処理の影響. 鉄と鋼. 103 [8] (2017) 491-497 10.2355/tetsutohagane.tetsu-2017-008 Open Access
  5. Dehai Ping, Tianwei Liu, Masato Ohnuma, Takahito Ohmura, Taichi Abe, Hidehiro Onodera. Microstructural Evolution and Carbides in Quenched Ultra-low Carbon (Fe–C) Alloys. ISIJ International. 57 [7] (2017) 1233-1240 10.2355/isijinternational.isijint-2016-624 Open Access
  6. N. Sekido, T. Ohmura, K. Tsuzaki. Application of Radio Frequency Glow Discharge Sputtering for Nanoindentation Sample Preparation. Journal of Materials Engineering and Performance. 26 [3] (2017) 1245-1250 10.1007/s11665-017-2521-1
2016
  1. 横井 龍雄, 首藤 洋志, 池田 賢一, 中田 伸生, 土山 聡宏, 大村 孝仁, 峯 洋二, 高島 和希. DP鋼の打抜き大変形の定量的評価とそのミクロ組織変化(第1報)DP鋼の打抜きダメージの定量化手法の提案. 鉄と鋼. 102 [5] (2016) 244-252 10.2355/tetsutohagane.tetsu-2015-087 Open Access
  2. 緒方 新也, 峯 洋二, 高島 和希, 大村 孝仁, 首藤 洋志, 横井 龍雄. DP鋼の打抜き大変形の定量的評価とそのミクロ組織変化(第3報)-予ひずみを受けたDP鋼のマイクロ引張挙動-. 鉄と鋼. 102 [5] (2016) 260-267 10.2355/tetsutohagane.tetsu-2015-085 Open Access
  3. Yi-Chieh Hsieh, Ling Zhang, Tsai-Fu Chung, Yu-Ting Tsai, Jer-Ren Yang, Takahito Ohmura, Takuya Suzuki. In-situ transmission electron microscopy investigation of the deformation behavior of spinodal nanostructured δ-ferrite in a duplex stainless steel. Scripta Materialia. 125 (2016) 44-48 10.1016/j.scriptamat.2016.06.047
  4. 関戸 信彰, 紙川 尚也, 津﨑 兼彰, 大村 孝仁, 原 徹, 宮本 吾郎, 古原 忠. 低炭素鋼中に相界面析出したVCナノ析出物の三次元観察. まてりあ. 55 [12] (2016) 593 10.2320/materia.55.593
  5. Tatsuo Yokoi, Hiroshi Shuto, Ken-ichi Ikeda, Nobuo Nakada, Toshihiro Tsuchiyama, Takahito Ohmura, Yoji Mine, Kazuki Takashima. Quantification of Large Deformation with Punching in Dual Phase Steel and Change of its Microstructure –Part I: Proposal of the Quantification Technique of the Punching Damage of the Dual Phase Steel. ISIJ International. 56 [11] (2016) 2068-2076 10.2355/isijinternational.isijint-2016-312 Open Access
  6. Shinya Ogata, Yoji Mine, Kazuki Takashima, Takahito Ohmura, Hiroshi Shuto, Tatsuo Yokoi. Quantification of Large Deformation with Punching in Dual Phase Steel and Change of its Microstructure –Part III: Micro-tensile Behavior of Pre-strained Dual-phase Steel. ISIJ International. 56 [11] (2016) 2084-2092 10.2355/isijinternational.isijint-2016-318 Open Access
  7. Yanxu Wang, Yo Tomota, Stefanus Harjo, Wu Gong, Takahito Ohmura. In-situ neutron diffraction during tension-compression cyclic deformation of a pearlite steel. Materials Science and Engineering: A. 676 (2016) 522-530 10.1016/j.msea.2016.08.122
  8. David Framil Carpeño, Takahito Ohmura, Ling Zhang, Michelle Dickinson, Christopher Seal, Margaret Hyland. Softening and compressive twinning in nanosecond ultraviolet pulsed laser-treated Ti6Al4V. Scripta Materialia. 113 (2016) 139-144 10.1016/j.scriptamat.2015.10.027
2015
  1. David Framil Carpeño, Takahito Ohmura, Ling Zhang, Jérôme Leveneur, Michelle Dickinson, Christopher Seal, John Kennedy, Margaret Hyland. Nanomechanical and in situ TEM characterization of boron carbide thin films on helium implanted substrates: Delamination, real-time cracking and substrate buckling. Materials Science and Engineering: A. 639 (2015) 54-64 10.1016/j.msea.2015.04.073
  2. D. Ueyama, Y. Saitoh, N. Ishikawa, T. Ohmura, S. Semboshi, F. Hori, A. Iwase. Hardness modification of Al–Mg–Si alloy by using energetic ion beam irradiation. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 351 (2015) 1-5 10.1016/j.nimb.2015.03.055
  3. Y.-J. Zhang, G. Miyamoto, K. Shinbo, T. Furuhara, T. Ohmura, T. Suzuki, K. Tsuzaki. Effects of transformation temperature on VC interphase precipitation and resultant hardness in low-carbon steels. Acta Materialia. 84 (2015) 375-384 10.1016/j.actamat.2014.10.049
2014
  1. Takahito Ohmura. 局所力学挙動と材料特性-nmスケール力学挙動解析による未踏領域への挑戦-. まてりあ. 53 [7] (2014) 312-320 10.2320/materia.53.312
  2. 丸川 健三郎, 大村 孝仁. 転位論・強化機構論-その歴史の概略と現状の問題点-. 鉄と鋼. 100 [9] (2014) 1076-1088 10.2355/tetsutohagane.100.1076 Open Access
  3. D X Ma, S Matsumoto, R Teranishi, T Ohmura, T Kiyoshi, A Otsuka, M Hamada, H Maeda, Y Yanagisawa, H Nakagome, H Suematsu. Degradation analysis of REBCO coils. Superconductor Science and Technology. 27 [8] (2014) 085014 10.1088/0953-2048/27/8/085014
  4. Ling Zhang, Nobuaki Sekido, Takahito Ohmura. Real time correlation between flow stress and dislocation density in steel during deformation. Materials Science and Engineering: A. 611 (2014) 188-193 10.1016/j.msea.2014.05.073
  5. ShuJun Ye, Akiyoshi Matsumoto, Kazumasa Togano, YunChao Zhang, Takahito Ohmura, Hiroaki Kumakura. Fabrication of MgB2superconducting wires with a hybrid method combining internal-Mg-diffusion and powder-in-tube processes. Superconductor Science and Technology. 27 [5] (2014) 055017 10.1088/0953-2048/27/5/055017
  6. Ling Zhang, Takahito Ohmura. Plasticity Initiation and Evolution during Nanoindentation of an Iron–3% Silicon Crystal. Physical Review Letters. 112 [14] (2014) 145504 10.1103/physrevlett.112.145504
2013
  1. ShuJun Ye, Minghui Song, Akiyoshi Matsumoto, Kazumasa Togano, Masaki Takeguchi, Takahito Ohmura, Hiroaki Kumakura. High-performance MgB2superconducting wires for use under liquid-helium-free conditions fabricated using an internal Mg diffusion process. Superconductor Science and Technology. 26 [12] (2013) 125003 10.1088/0953-2048/26/12/125003
  2. 大村 孝仁. ナノインデンテーションと関連技術への期待. 精密工学会誌. 79 [12] (2013) 1181-1184
  3. S J Ye, A Matsumoto, K Togano, T Ohmura, H Kumakura. The critical current properties of 37-filament internal Mg diffusion-processed MgB2wires. Superconductor Science and Technology. 26 [10] (2013) 105027 10.1088/0953-2048/26/10/105027
  4. 大村 孝仁. 局所力学挙動解析による機械的特性の評価技術 ナノスケールからの変形機構の素過程に迫る. 「塑性と加工」2013年10月特集号. 54 [633] (2013) 886-890
  5. 大村 孝仁. 薄膜・コーティングの硬さ測定法. 技術情報協会「光学薄膜の最適設計・成膜技術と膜厚・膜質・光学特性の制御」. (2013) 150-156
  6. 大村 孝仁. ナノインデンテーション法による局所力学挙動解析. 会報「軽金属」. 63 [2] (2013) 65-72
2012
  1. Ling Zhang, Takahito Ohmura, Kaoru Sekido, Toru Hara, Kiyomi Nakajima, Kaneaki Tsuzaki. Dislocation character transition and related mechanical response in a body-centered cubic single crystal. Scripta Materialia. 67 [4] (2012) 388-391 10.1016/j.scriptamat.2012.05.032
  2. T. Ohmura, L. Zhang, K. Sekido, K. Tsuzaki. Effects of lattice defects on indentation-induced plasticity initiation behavior in metals. Journal of Materials Research. 27 [13] (2012) 1742-1749 10.1557/jmr.2012.161
  3. Yong-Jae Kim, Byung-Gil Yoo, In-Chul Choi, Moo-Young Seok, Ju-Young Kim, Takahito Ohmura, Jae-il Jang. Martensitic phase transformation and pop-in in compression of austenitic steel nanoplates observed in situ by transmission electron microscopy. Materials Letters. 75 (2012) 107-110 10.1016/j.matlet.2012.02.014
  4. Kaoru Sekido, Takahito Ohmura, Toru Hara, Kaneaki Tsuzaki. Effect of Dislocation Density on the Initiation of Plastic Deformation on Fe–C Steels. MATERIALS TRANSACTIONS. 53 [5] (2012) 907-912 10.2320/matertrans.m2011356
  5. X H Min, L Zhang, K Sekido, T Ohmura, S Emura, K Tsuchiya, K Tsuzaki. Strength evaluation ofαandβphases by nanoindentation in Ti–15Mo alloys with Fe and Al addition. Materials Science and Technology. 28 [3] (2012) 342-347 10.1179/1743284711y.0000000052
2011
  1. K. Sekido, T. Ohmura, T. Sawaguchi, M. Koyama, H.W. Park, K. Tsuzaki. Nanoindentation/atomic force microscopy analyses of ε-martensitic transformation and shape memory effect in Fe–28Mn–6Si–5Cr alloy. Scripta Materialia. 65 [11] (2011) 942-945 10.1016/j.scriptamat.2011.08.010
  2. Kaoru Sekido, Takahito Ohmura, Ling Zhang, Toru Hara, Kaneaki Tsuzaki. The effect of interstitial carbon on the initiation of plastic deformation of steels. Materials Science and Engineering: A. 530 (2011) 396-401 10.1016/j.msea.2011.09.102
  3. Ling Zhang, Takahito Ohmura, Kaoru Seikido, Kiyomi Nakajima, Toru Hara, Kaneaki Tsuzaki. Direct observation of plastic deformation in iron–3% silicon single crystal by in situ nanoindentation in transmission electron microscopy. Scripta Materialia. 64 [9] (2011) 919-922 10.1016/j.scriptamat.2011.01.037
2010
  1. Q.S. Mei, L. Zhang, K. Tsuchiya, H. Gao, T. Ohmura, K. Tsuzaki. Grain size dependence of the elastic modulus in nanostructured NiTi. Scripta Materialia. 63 [10] (2010) 977-980 10.1016/j.scriptamat.2010.07.018
  2. Ling Zhang, Takahito Ohmura, Akinobu Shibata, Kaneaki Tsuzaki. Characterization of local deformation behavior of Fe–Ni lenticular martensite by nanoindentation. Materials Science and Engineering: A. 527 [7-8] (2010) 1869-1874 10.1016/j.msea.2009.11.051
2009
  1. Ling Zhang, Takahito Ohmura, Satoshi Emura, Nobuaki Sekido, Fuxing Yin, Xiaohua Min, Kaneaki Tsuzaki. Evaluation of matrix strength in ultra-fine grained pure Al by nanoindentation. Journal of Materials Research. 24 [9] (2009) 2917-2923 10.1557/jmr.2009.0342
2004
  1. T. Ohmura, A.M. Minor, E.A. Stach, J.W. Morris. Dislocation-grain boundary interaction in martensitic steel obserbed through in-situ nanoindentation in a TEM. Journal of Materials Research. 19 [12] (2004) 3626-3632 10.1557/jmr.2004.0474
  2. P. Kuppusami, H. Murakami, T. Ohmura. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ir-Ta COATINGS ON NICKEL BASE SINGLE CRYSTAL SUPERALLOY TMS-75. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 22 [4] (2004) 1208-1217 10.1116/1.1763913
  3. M. Ohtsuki, R. Tamura, S. Takeuchi, S. Yoda, T. Ohmura. Hard metallic glass of tungsten-based alloy. Applied Physics Letters. 84 [24] (2004) 4911-4913 10.1063/1.1763639
  4. C.G Lee, T Ohmura, Y Takeda, S Matsuoka, N Kishimoto. Radiation-induced swelling and softening in magnesium aluminate spinel irradiated with high-flux Cu- ions. Journal of Nuclear Materials. 326 [2-3] (2004) 211-216 10.1016/j.jnucmat.2004.01.010
  5. T. Ohmura, T. Hara, K. Tsuzaki, H. Nakatsu, Y. Tamura. Mechanical characterization of secondary-hardening martensitic steels using nanoindentation. Journal of Materials Research. 19 [01] (2004) 79-84 10.1557/jmr.2004.19.1.79
  6. T. Ohmura, K. Tsuzaki, N. Tsuji, N. Kamikawa. Matrix strength evaluation of ultra-fine grained steels by nanoindentation. Journal of Materials Research. 19 [01] (2004) 347-350 10.1557/jmr.2004.19.1.347

書籍 TSV

2022
  1. OHMURA, Takahito. Plastic Deformation in Structural Materials. The Plaston Concept. Springer, 2022, 39.
2006
  1. 大村 孝仁. 鉄鋼組織の硬さ測定―マルテンサイト組織の強化機構を解明. 超鉄鋼 強度2倍×寿命2倍の実力と可能性. , 2006, 158-173.
  2. 大村 孝仁, 津﨑 兼彰. TEM in-situナノインデンテーション法による圧入変形時の転位ー粒界相互作用の観察. 材料開発のための顕微鏡法と応用写真集. , 2006, 145-.
  3. 大村 孝仁. ナノインデンテーション. ナノマテリアル工学大系 第2巻 ナノ金属(フジテクノシステム). , 2006, 400-406.

会議録 TSV

2018
  1. Katsuya NAKANO, Kunio HAYASHI, Kengo TAKEDA, II, Seiichiro, OHMURA, Takahito. Effect of Grain Boundary on the Plastic Deformation in Fe-C alloys. Proceedings of The 5th International Symposium on Steel Science . (2018) 219-222
  2. 長田 俊郎, 三留 正則, 原 徹, 阿部 太一, 中尾航, 大村 孝仁. タービン翼用自己治癒セラミックスの開発. 第46回日本ガスタービン学会定期講演会 講演論文集. (2018) 2-5
2015
  1. Shiori Suzuki, Nobuaki Sekido, Takahito Ohmura, Seiji Miura. Evaluation of fracture toughness of alpha-Nb5Si3 by micro-sized cantilever beam testing. MRS Symposium Proceedings. (2015) yy05-08-1-yy05-08-6 10.1557/opl.2015.147
2012
  1. Bin Gan, MURAKAMI, Hideyuki, R. Maaß, L. Meza, J.R. Greer, OHMURA, Takahito, Sammy Tin. NANOINDENTATION AND NANO-COMPRESSION TESTING OF Ni3Al PRECIPITATES. Superalloys 2012. (2012) 83-91
2011
  1. TSUCHIYA, Koichi, MEI, Qingsong, ZHANG, Ling, OHMURA, Takahito. Effect of Grain Refinement by SPD on Elastic Properties in TiNi. Production of Multifunctional Materials Using Severe Plastic Deformation. (2011) 84-87
2007
  1. TANAKA, Yoshihisa, Jenn Ming Yang, OHMURA, Takahito, Yu Fu Liu, KAGAWA, Yutaka. NANO-MECHANICAL CHARACTERIZATION OF DISCONTINUOUSLY REINFORCED TITANIUM COMPOSITE. The Proceeding of the 16th International Conference on Composite Materials . (2007) 9999
  2. OHMURA, Takahito, TSUZAKI, Kaneaki. A new aspect of the strengthening factors of Fe-C martensite through characterization of nanoindentation-induced deformation behavior. Proc. The 1st International Symposium on Steel Science. (2007) 35-46
2005
  1. SAWADA, Kota, OHMURA, Takahito, OHBA, Toshio, TSUZAKI, Kaneaki, ABE, Fujio, KIMURA, Kazuhiro, 野中勇. Elastic properties of heat resistant steels after long-term creep exposure. Proc. of International conference on Creep and Fracture in High Temperature Components - Design and Life Assessment Issues. (2005) 268-279
2004
  1. OHMURA, Takahito, TSUZAKI, Kaneaki. EVALUATION OF NANO-MECHANICAL PROPERTIES OF HIGH-STRENGTH STEELS USING NANOINDENTATION. Proc. 12th International Conference on Experimental Mechanics. (2004) 1-8
  2. JINXU, LI, OHMURA, Takahito, MURAYAMA, Mitsuhiro, TSUZAKI, Kaneaki. Nanohardness Distribution and Its Microstructure Dependence in a High Strength Martensitic Steel. Second International Conference on Advanced Structural Steels (ICASS 2004). (2004) 630-633

口頭発表 TSV

2023
  1. POMES, Silvia, ADACHI Nozomu, WAKEDA, Masato, OHMURA, Takahito. Detection of incipient plasticity in bulk metallic glasses through nanoindentation testing. 7th International Indentation Workshop. 2023
  2. PAUL, Viola, SOMEKAWA, Hidetoshi, OHMURA, Takahito. Effect of yttrium addition on the nanoindentation behavior at Mg–Y alloy grain boundaries. 7th International Indentation Workshop (IIW7). 2023
  3. OHMURA, Takahito. Nano-mechanical characterization of dislocation-boundary interaction in metals. 7th International Indentation Workshop (IIW7). 2023 招待講演
  4. POMES, Silvia, ADACHI Nozomu, WAKEDA, Masato, OHMURA, Takahito. Mechanical response of Zr-based bulk metallic glass at elevated temperature investigated through nanoindentation testing. MRM2023/IUMRS-ICA2023 Grand Meeting. 2023
  5. PAUL, Viola, SOMEKAWA, Hidetoshi, OHMURA, Takahito. Effect of Yttrium Addition on the Nanoindentation Behavior at Mg-Y Alloy Grain Boundary. 日本金属学会2023年秋期(第173回)講演大会. 2023
  6. POMES, Silvia, 足立 望, WAKEDA, Masato, OHMURA, Takahito. Mechanical characterization at elevated temperatures of Zr50Cu40Al10 bulk metallic glass via nanoindentation testing. JIMM 2023年秋期(第173回))講演大会. 2023
  7. HIRAI, Yuichi, OHMURA, Takahito, NAKANISHI, Takayuki, TAKEDA, Takashi, Rémi Métivier, Clémence Allain. Luminescent lanthanide(III) molecular crystals under mechanical stimuli and photo-illumination. 20th International Conference on Luminescence. 2023
  8. POMES, Silvia, ノゾム アダチ, WAKEDA, Masato, OHMURA, Takahito. Temperature-dependent deformation dynamics in Zr-based bulk metallic glass investigated through nanoindentation. 日本金属学会研究会 "微小領域の力学特性評価とマルチスケールモデリング". 2023
  9. 畠山 友孝, 澤田 浩太, 渡邊 誠, 鈴木 大, 大村 孝仁. レーザー粉末床溶融結合法で作製したGrade 91鋼のクリープ中の組織変化. 微小力学研究会. 2023
  10. HIRAI, Yuichi, OHMURA, Takahito, NAKANISHI, Takayuki, TAKEDA, Takashi, Remi Metivier, Clemence Allain. Decoding triboluminescence by a tetramorphic lanthanide(III) coordination polymer. 11th International Conference on f-Elements. 2023
  11. HIRAI, Yuichi, OHMURA, Takahito, TAKEDA, Takashi, NAKANISHI, Takayuki, Clémence Allain, Rémi Métivier. Study on mechanofluorochromism of pyrene derivatives from nanomechanical point of view. The 31st International Conference on Photochemistry. 2023
  12. OHMURA, Takahito. Nano-mechanical Characterization for Multi-scale Modeling in Mechanical Behavior of Metallic Materials. The 1st KOSEN Research International Symposium. 2023 招待講演
  13. 大村 孝仁. 「局所力学解析による材料評価の最前線」. 「微小力学懇話会」第1回. 2023 招待講演
2022
  1. MORITA, Koji, 寺田大将, 松井大輝, 池田賢一, 三浦誠司, OHMURA, Takahito. Nanoindentation Examination of Kink Boundary Hardness in Ti3SiC2 MAX Phase. The 5th International Symposium on Long-Period Stacking/Order Structure and Mille-feuille Structure "LPSO/MFS 2022" . 2022
  2. OHMURA, Takahito. Nano-mechanical behavior associated with dislocation-boundary interaction characterized though nanoindentation and TEM in-situ straining. The 7th International Conference on Electronic Materials and Nanotechnology for Green Environment (ENGE 2022). 2022 招待講演
  3. 池田 亜矢子, 長田 俊郎, 阿部 太一, 川岸 京子, 大村 孝仁. バルク組成傾斜試料を用いた多元実験状態図のハイスループット構築手法. 日本金属学会2022年秋期(第171回)講演大会. 2022
  4. OHMURA, Takahito. Nano-mechanical characterization in constituent phases of steels for understanding multi-scale deformation behavior. MS&T22. 2022 招待講演
  5. 井 誠一郎, 榎並 武郎, 大村 孝仁, 連川 貞弘. TEM内圧縮試験時のすべり系解析と Σ3{111} Al双結晶における粒界-転位相互作用. 日本金属学会2022年秋期(第171回)講演大会. 2022
  6. PAUL, Viola, WAKEDA, Masato, AMEYAMA Kei, OTA-KAWABATA Mie, OHMURA, Takahito. Local Deformation Behavior of the Copper Harmonic Structure near Grain Boundaries Investigated through Nanoindentation. 日本金属学会 2022年秋期第171回講演大会. 2022
  7. 長田 俊郎, 池田 亜矢子, 後藤 健太, 渡邊 育夢, 川岸 京子, 大村 孝仁. 多元系合金における応力-ひずみ曲線のハイスループット評価. 日本金属学会2022秋期講演大会. 2022
  8. 森田 孝治, 松井 大輝, 寺田大将, 池田賢一, 三浦誠司, 大村 孝仁. ナノインデンテーション法によるTi3SiC2MAX相セラミックス中のキンク境界近傍の機械特性評価. 日本金属学会 2022年秋期第171回講演大会. 2022
  9. POMES, Silvia, ADACHI Nozomu, WAKEDA, Masato, OHMURA, Takahito. Identification of plasticity initiation in Zr50Cu40Al10 bulk metallic glass via nanoindentation. 日本金属学会 2022年秋期第171回講演大会. 2022
  10. HIRAI, Yuichi, OHMURA, Takahito, TAKEDA, Takashi, NAKANISHI, Takayuki. Polymorphic lanthanide(III) coordination polymers with mechano-responsive luminescence. 44th International Conference on Coordination Chemistry https://www.iccc2022.com. 2022
  11. HIRAI, Yuichi, TAKEDA, Takashi, OHMURA, Takahito, NAKANISHI, Takayuki. Bright Triboluminescence of An Inefficient Photoluminescent Eu(III) Complex. 29th RARE EARTH RESEARCH CONFERENCE (RERC29) https://web.sas.upenn.edu/rerc29/. 2022
  12. PAUL, Viola, OHMURA, Takahito, Yanxu Wang, 飴山 惠, 川畑 美絵. Nanomechanical Analysis of SUS304L Stainless Steel with Bimodal Distribution in Grain Size. The 7th International Conference on Advanced Steels (ICAS 2022). 2022
  13. 小川 由希子, 原 由佳, 仲川 枝里, 染川 英俊, 大村 孝仁. スパッタリングにより作製したMg/Ti層状構造のマイクロピラー圧縮変形挙動. 軽金属学会第142回春期大会. 2022
  14. OHMURA, Takahito. Nano-mechanical Characterization in Constituent Phases of Steels for Interpretation of Macroscopic Deformation Behavior. 16th International Conference on Martensitic Transformation (ICOMAT 2022). 2022 招待講演
  15. 大村 孝仁. 圧入応力下におけるプラストン発生の可能性. 日本金属学会 2022年春期第170回講演大会. 2022 招待講演
  16. 大村 孝仁. ナノインデンテーション法による局所力学解析. 日本金属学会 2022年春期第170回講演大会. 2022 招待講演
  17. OHMURA, Takahito. Nano-mechanical behavior associated with dislocation-boundary interaction characterized though nanoindentation and TEM in-situ straining. TMS 2022 Annual Meeting & Exhibition. 2022 招待講演
2020
  1. 山口順平, 井 誠一郎, 大村 孝仁, 連川貞弘. TEM内その場変形法を用いた純マグネシウム単結晶および双結晶における塑性変形開始挙動の観察と力学応答測定. 日本金属学会 2020年度秋期講演大会. 2020
  2. II, Seiichiro, 榎並 武郎, OHMURA, Takahito, 連川 貞弘. Geometric characterization of dislocations interacted with grain boundary in aluminum bicrystal. ISPMA 15 - 15th International Symposium on Physics of Materials / https://www.mff.cuni.cz/en/ispma15/home. 2020
  3. OHMURA, Takahito. NANO-MECHANICAL BEHAVIOR OF BCC IRONS CHARACTERIZED THROUGH TEM IN-SITU STRAINING AND RELATED TECHNIQUES. International Conference on Plasticity, Damage & Fracture (ICPDF 2020). 2020 招待講演
2019
  1. OHMURA, Takahito. Nano-mechanical characterization in constituent phases of steels for interpretation of macroscopic deformation behavior. Berkeley Symposium 2019. 2019 招待講演
  2. 後藤 健太, 渡邊 育夢, 大村 孝仁. インデンテーション後のパイルアップ挙動を利用した弾塑性特性の逆推定手法の構築とその応用. 日本金属学会研究会 "微小領域の力学特性評価とマルチスケールモデリング"第一回研究集会. 2019
  3. 陳 達徳, 渡邊 育夢, 大村 孝仁. 押し込み試験による高エントロピー合金のひずみ速度依存性計測. 日本金属学会研究会 "微小領域の力学特性評価とマルチスケールモデリング"第一回研究集会. 2019
  4. 大村 孝仁. ナノインデンテーションおよびTEMその場変形によるBCC鉄の微小力学挙動解析. 日本金属学会研究会No.82 "微小領域の力学特性評価とマルチスケールモデリング" 2019 . 2019
  5. 井 誠一郎, 榎並 武郎, 大村 孝仁, 連川 貞弘. TEMその場観察によるAl単・双結晶の変形挙動. 日本金属学会研究会 「微小領域の力学特性評価とマルチスケール モデリング」 第一回研究集会. 2019
  6. 渡邊 育夢, ルジック ジョバナ, 後藤 健太, 大村 孝仁. 耐熱合金の高温ナノインデンテーション. M&M2019材料力学カンファレンス. 2019
  7. MASUDA, Hiroshi, MORITA, Koji, WATANABE, Makoto, OHMURA, Takahito. Indentation-based micromechanical characterization of metastable tetragonal zirconia. The 13th Pacific Rim Conference of Ceramics Societies. 2019
  8. WATANABE, Ikumu, RUZIC, Jovana, GOTO, Kenta, OHMURA, Takahito. Nano-indentation measurement for heat resistant alloys at elevated temperatures in insert atmosphere. International Conference on Advanced Technology in Experimental Mechanics 2019. . 2019
  9. OHMURA, Takahito, Ling Zhang, LI, Hongxing. NANO-MECHANICAL BEHAVIOR OF BCC IRONS CHARACTERIZED THROUGH NANOINDENTATION AND TEM IN-SITU STRAINING. Nanomechanical Testing in Materials Research and Development VII. 2019 招待講演
  10. 増田 紘士, 森田 孝治, 渡邊 誠, 大村 孝仁. ジルコニアセラミックスにおける結晶塑性の温度依存性. 高温変形の組織ダイナミクス研究会 「2019 年度 夏の学校」. 2019
  11. MAN, Tinghui, OHMURA, Takahito, TOMOTA, Yo. Quantitative evaluation of the boundary effect on nanoindentation-induced martensitic transformation. The Iron and Steel Institute of Japan. 2019
  12. 大村 孝仁. 局所力学測定による不均一変形の素過程解析. 日本鉄鋼協会「不均一変形研究会」 材料の組織と特性部会/評価・分析・解析部会. 2019 招待講演
  13. GOTO, Kenta, WATANABE, Ikumu, OHMURA, Takahito. Inverse estimation of local elastoplastic properties using nano-indentation for microstructure modeling. 15th International Conference on Computational Plasticity. 2019 招待講演
  14. II, Seiichiro, LI, Hongxing, OHMURA, Takahito, 辻 伸泰. Direct observation of the dislocation interaction with grain boundary in Ultrafine-Grained IF steels by in-situ TEM technique. The 10th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-10). 2019 招待講演
  15. OHMURA, Takahito, Ling Zhang, LI, Hongxing. Nano-mechanical characterization for bcc metals through nanoindentation and TEM in-situ straining. NANO KOREA 2019 Symposium. 2019 招待講演
  16. II, Seiichiro, HARA, Toru, OHMURA, Takahito. Geometrical analysis for misorientation angle dependence of grain boundary - dislocation interaction. Intergranular and Interphase Boundaries in Materials - IIB2019. 2019
  17. OHMURA, Takahito. Nano-mechanical behavior of BCC irons characterized through nanoindetation and in-situ straining. Seminar at Seoul National University. 2019 招待講演
  18. OHMURA, Takahito. Nano-mechanical Characterization for BCC Metals through Nanoindentation and TEM in-situ Straining. Workshop on Ultra-High Temperature Materials 2019. 2019 招待講演
  19. OHNUMA, Ikuo, HARA, Toru, OHMURA, Takahito. Calculation of grain boundary segregation in steels by CALPHAD method. CALPHAD 2019 (XLVIII). 2019
  20. OSADA, Toshio, 玉川 雄貴, 鴨田 喜一, MITOME, Masanori, HARA, Toru, ABE, Taichi, 中尾 航, OHMURA, Takahito. Self-crack-healing ceramics with 3D networks of healing activator. 7th International Conference on Self-Healing Materials 2019. 2019
  21. OSADA, Toshio, 玉川 雄貴, 鴨田 喜一, MITOME, Masanori, HARA, Toru, ABE, Taichi, 中尾 航, OHMURA, Takahito. Self-crack-healing ceramics with 3D networks of healing activator. 7th International Conference on Self-Healing Materials 2019. 2019
  22. OHMURA, Takahito. Local plasticity initiation and subsequent behavior in bcc iron investigated through nano-mechanical characterization. NW-NIMS workshop. 2019 招待講演
  23. WATANABE, Ikumu, GOTO, Kenta, OHMURA, Takahito. Estimation of stress-strain curve using indentation and its computational simulation. NU-NIMS Materials Genome Workshop 2019. 2019 招待講演
  24. 増田 紘士, 森田 孝治, 大村 孝仁. ナノインデンテーションによる立方晶ジルコニアの結晶塑性解析. 日本セラミックス協会2019年年会. 2019
  25. 大沼 郁雄, 原 徹, 大村 孝仁. 鉄鋼材料のランダム粒界と低エネルギー粒界における偏析計算. 日本鉄鋼協会第177回春季講演大会. 2019
  26. 後藤 健太, 渡邊 育夢, 大村 孝仁. 押込み試験による弾性率評価に及ぼす加工硬化特性の影響. 日本金属学会2019年春季講演大会. 2019
  27. オウ エンショ, 友田 陽, 大村 孝仁, ゴン ウー, 諸岡 聡, ハルヨ ステファヌス. SCM鋼マルテンサイト変態のサーメックマスターを用いた中性子回折による検討 (中性子回折法によるマルテンサイト変態の再検討 第4報). 第177回春季講演大会. 2019
  28. 増田 紘士, 森田 孝治, 大村 孝仁. 立方晶ジルコニアセラミックスにおける微小領域変形機構の温度・結晶方位依存性. 日本金属学会2019年春期(第164回)講演大会. 2019
  29. MASUDA, Hiroshi, MORITA, Koji, OHMURA, Takahito. Nanoscopic plasticity in cubic zirconia ceramics. MANA International Symposium 2019. 2019
2018
  1. 後藤 健太, 渡邊 育夢, 大村 孝仁. 押込み試験結果の感度解析と弾塑性特性の逆推定. 日本機械学会 M&M2018材料力学カンファレンス. 2018
  2. GOTO, Kenta, WATANABE, Ikumu, OHMURA, Takahito. Inverse estimation of stress-strain curve from load-displacement curve and indentation mark of single indentation. 9th Annual Symposium of Indian Scientists Association in Japan. 2018
  3. オウ エンショ, 友田 陽, 大村 孝仁, ゴン ウー, ハルヨ ステファヌス. パーライト鋼の内部応力発生と変化 -その場中性子回折による検討ー. 日本中性子科学会第18回年会. 2018
  4. 大村 孝仁. “境界領域“という本拠地. 第13回若手シンポジウム. 2018 招待講演
  5. 大村 孝仁. BCC金属の圧入変形における簡潔塑性のモデル化. 第31回計算力学講演会(CMD2018). 2018
  6. CHANG, Ya-Ling, II, Seiichiro, OHMURA, Takahito. Interactions between dislocations and grain boundary investigated by STEM. ICAS2018. 2018
  7. PING, De-hai, OHMURA, Takahito. A NEW MECHANISM FOR THE FORMATION OF θ-Fe3C IN CARBON STEELS. 6th international conference on advanced steels (ICAS 2018). 2018
  8. MAN, Tinghui, OHMURA, Takahito, TOMOTA, Yo. NANOINDENTATION BEHAVIOR OF INDIVIDUAL AUSTENITE GRAIN IN STEELS. ICAS2018. 2018
  9. 大村 孝仁. Collective Motion of Dislocation Associated with Local Plasticity Initiation and Subsequent Behavior in BCC Metals. ICAS2018. 2018 招待講演
  10. OHMURA, Takahito. Collective Motion of Dislocation Associated with Local Plasticity Initiation and Subsequent Behavior in BCC Metals. MMM2018. 2018
  11. WANG, Yanxu, OHMURA, Takahito, TOMOTA, Yo. EFFECT OF FERRITE/CEMENTITE INTERFACE CHARACTER ON YIELDING BEHAVIOR INVESTIGATED BY SEM/EBSD, HR-TEM, NANOINDENTATION, AND DIFFRACTION USING NEUTRON AND SYNCHROTRON X-RAY. ICAS2018. 2018
  12. LI, Hongxing, Si Gao, RUZIC, Jovana, Nobuhiro Tsujii, OHMURA, Takahito. Effect of grain sizes on nanoindentation induced plasticity initiation in interstitial free steel. ICAS2018. 2018
  13. 大村 孝仁. ナノスケール力学測定による力学挙動の素過程解析と新規指導原理の確立. 「新機能につながるナノスケール力学制御」ワークショップ. 2018 招待講演
  14. OHMURA, Takahito. Local plasticity in BCC metals investigated through nano-mechanical characterization. APCP2018. 2018 招待講演
  15. 井 誠一郎, Ya-Ling Chang, 原 徹, 大村 孝仁. TEM characterization of dislocations generated by nanoindentation around grain boundary with Fe-3% Si bicrystals. MS&T 18. 2018
  16. 大村 孝仁. Collective Motion of Dislocation Associated with Local Plasticity Initiation and Subsequent Behavior in bcc Metals. MS&T18. 2018 招待講演
  17. 長田俊郎, 三留正則, 原徹, 阿部太一, 中尾航, 大村孝仁. タービン翼用自己治癒セラミックスの開発. 第46回日本ガスタービン学会定期講演会. 2018
  18. 大村 孝仁. 塑性変形素過程に対する固溶元素の影響の検討. 鉄鋼中の軽元素と材料組織および特性研究会 第8回研究会. 2018 招待講演
  19. PING, De-hai, OHMURA, Takahito, 大沼 正人. A possible γ-Fe(C) → ω-Fe3C → ω′-Fe3C → θ′-Fe3C → θ-Fe3C transition pathway. 日本鉄鋼協会第176回秋季講演大会. 2018
  20. 大沼 郁雄, 原 徹, 大村 孝仁. CALPHAD法による鉄鋼材料の粒界偏析計算. 日本鉄鋼協会第176回秋季講演大会. 2018
  21. 大塚聖良, 井 誠一郎, 大村 孝仁, 連川貞弘. 高温ナノインデンテーション法を用いた純アルミニウムの塑性変形開始挙動の温度および結晶方位依存性の調査. 日本金属学会 秋期(第163回)講演大会. 2018
  22. 増田 紘士, 森田 孝治, 大村 孝仁. ナノインデンテーションによる立方晶ジルコニアの低温塑性変形. 日本金属学会2018年秋期(第163回)講演大会. 2018
  23. 川上信之, 山田敬子, 一原主税, 岡崎喜臣, 井 誠一郎, 大村 孝仁, 原 徹. Evaluation of TES microcalorimeter EDS for low-concentration phosphorus detection in steels. The 19th International Microscopy Congress (IMC19). 2018
  24. 大村 孝仁. ナノスケール解析が転位論モデルにもたらすもの. 日本鉄鋼協会 材料の組織と特性部会 若手フォーラム. 2018 招待講演
  25. 後藤 健太, 渡邊 育夢, 大村 孝仁. 押込み試験と有限要素解析による弾塑性パラメータの逆推定. 日本鉄鋼協会若手フォーラム. 2018 招待講演
  26. 大村 孝仁. Collective motion of dislocation associated with local plasticity initiation and subsequent behavior in bcc metals. ICSMA19. 2018 招待講演
  27. 井 誠一郎, 榎並武郎, 大村 孝仁, 連川貞弘. In-situ TEM observation of dislocation-grain boundary interaction in aluminum. Thermec 2018. 2018 招待講演
  28. 平 徳海, Xuan Liu, Xing Lu, 大村 孝仁, 大沼正人. Nanostructure in Quenched Fe-C martensite. 6th International Indentation workshop. 2018
  29. 大村 孝仁. Indentation-induced Intermittent Plasticity Associated with Collective Motion of Dislocation in BCC Metals. Sixth International Indentation Workshop. 2018 招待講演
  30. ルジック ジョバナ, 渡邊 育夢, 大村 孝仁. Evaluation of Temperature Dependent Mechanical Behavior of Metals Using High Temperature Nanoindentation. Sixth International Indentation Workshop. 2018
  31. 澤口 孝宏, 関戸 薫子, 大村 孝仁. ε-Martensite Variant Structure Developed beneath Nanoindentation on a Fe-Mn-Si Shape Memory Alloy. 6th International Indentation Workshop, IIW6. 2018
  32. Xuan Liu, Xing Lu, 平 徳海, 大村 孝仁, 大沼 正人. Microstructural Characterization of Water-quenched High Carbon Fe-C Alloys. 6th International Indentation workshop. 2018
  33. 後藤 健太, 渡邊 育夢, 大村 孝仁. Inverse Estimation of Elasto-Plastic Properties of Alloys from Single Indentation Test with Finite Element Method. Sixth International Indentation Workshop. 2018
  34. MAN, Tinghui, OHMURA, Takahito, TOMOTA, Yo. Nanoindentation behavior of individual austenite grain in steels. Sixth International Indentation Workshop. 2018. 2018
  35. 大村 孝仁. Collective Motion of Dislocation Associated with Local Plasticity Initiation and Subsequent Behavior in BCC Metals. 10th Berkeley Symposium on Advanced Materials. 2018 招待講演
  36. 後藤 健太, 渡邊 育夢, 大村 孝仁. 逆解析を用いた押込み試験からの弾塑性特性評価. 第23回計算工学講演会. 2018
  37. 大村 孝仁. Evaluation of grain boundary effect through nano-mechanical characterization in steels. International Symposium on Grain Size Matters in Steel. 2018 招待講演
  38. MAN, Tinghui, OHMURA, Takahito, TOMOTA, Yo. Influence of the interface on nanoindentation behavior in the retained austenite for a quenched-tempered steel . The Iron and Steel Institute of Japan. 2018
  39. 長田 俊郎, 鴨田 紀一, 三留 正則, 原 徹, 阿部 太一, 玉川雄樹, 中尾航, 大村 孝仁. 自己治癒セラミックスの新展開 -治癒活性相3Dネットワークの設計-. 日本金属学会2018春期講演大会. 2018
  40. 後藤 健太, 渡邊 育夢, 大村 孝仁. 押込み試験後の圧痕形状を用いた弾塑性特性の評価. 日本金属学会2018年春期講演大会. 2018
  41. 大村 孝仁. 局所力学解析による転位の集団運動と間欠塑性現象のモデル化. 日本金属学会2018春期大会. 2018 招待講演
  42. 榎並武郎, 井 誠一郎, 大村 孝仁, 連川貞弘. TEM内その場変形法を用いた純アルミニウムにおける転位運動と力学応答の観察. 日本金属学会 2018年春期大会. 2018
  43. 大村 孝仁. Intermittent Plasticity Associated with Collective Motion of Dislocation in bcc alloys. TMS 2018 Annual Meeting & Exhibition(TMS2018). 2018 招待講演
  44. 大村 孝仁. Intermittent Plastic Deformation Associated with Collective Motion of. ESISM 第6回国際ワークショップ. 2018 招待講演
  45. 大村 孝仁. ナノインデンテーション法の特徴と活用法. ナノインデンテーションセミナー. 2018 招待講演
2017
  1. ルジック ジョバナ, 江村 聡, 渡邊 育夢, 大村 孝仁. Effect of Mo Segregation on Mechanical Properties of TiMo Alloy Studied by Nanoindentation. Annual symposium by Indian scientists association in Japan. 2017
  2. 大村 孝仁. Advanced Nano-mechanical Characterization for Better Performance in Structural Materials. International Conference on Nanotechnology and Expo(Nanotek). 2017 招待講演
  3. 大村 孝仁. Nano-mechanical characterization of steels through Nanoindentation and TEM in-situ straining. the 3rd East-Asia Microcopy Conference (EAMC3). 2017 招待講演
  4. 川上信之, 一原主税, 岡崎喜臣, 井 誠一郎, 大村 孝仁, 原 徹. Detection of phosphorus segregation at grain boundaries by TES microcalorimeter EDS-STEM. The 3rd East-Asia Microscopy Conference(EAMC3). 2017
  5. オウ エンショ, 友田 陽, ハルヨ ステファヌス, ゴン ウー, 大村 孝仁. フェライトーセメンタイト鋼の回折プロファイルラインブロードニングの起源. The 5th Int. Sympo. on Steel Science. 2017
  6. 後藤 健太, 渡邊 育夢, 大村 孝仁. Characterization of microscale heterogeneity in mechanical properties with nanoindentation and finite element analysis. NIMS WEEK 2017. 2017
  7. ルジック ジョバナ, 江村 聡, 渡邊 育夢, 大村 孝仁. Analysis of nanoindentation pile-up effect in TiMo alloy. NIMS WEEK 2017. 2017
  8. 安藤 玲音, 松野 崇, 渡邊 育夢, 大村 孝仁. Nano Indentation Test around Ferrite-martensite Interface in Dual Phase Steels. NIMS WEEK 2017. 2017
  9. 長田 俊郎, 尾崎伸吾, 原 徹, 三留 正則, 阿部 太一, 中尾航, 渡邊 育夢, 大村 孝仁. 自己治癒セラミックスにおける生体模倣設計:MIシステム構築に向けて. NIMS WEEK 2017. 2017
  10. オウ エンショ, 友田 陽, 大村 孝仁. フェライト・セメンタイト鋼の回折プロファイルラインブロードニングの起源. 鉄鋼協会秋季講演大会. 2017
  11. 榎並武郎, 井 誠一郎, 大村 孝仁, 連川貞広. TEM内その場変形法を用いた粒界-転位相互作用の観察. 日本金属学会 2017年秋期(第161回)講演大会. 2017
  12. 平徳海, AlokSingh, 阿部太一, 小野寺秀博, 郭樹啓, 大村孝仁, 大沼 正人. The observation of ω-Fe from <112> zone axes of twinned martensite. 日本鉄鋼協会第174回秋季講演大会. 2017
  13. 満, 大村 孝仁, 友田 陽. 焼入れ焼き戻し鋼中の個々のオーステナイト粒の力学的挙動. 鉄鋼協会秋季講演大会. 2017
  14. オウ エンショ, 友田 陽, 大村 孝仁. フェライト・セメンタイト鋼の降伏現象と界面構造の関係. 鉄鋼協会秋季講演大会. 2017
  15. オウ エンショ, 大貫貴久, 友田 陽, ハルヨ ステファヌス, 大村 孝仁. 中性子回折によるパーライト鋼のマルチスケールヘテロ変形解析. 鉄鋼協会秋季講演大会. 2017
  16. 大村 孝仁. 圧入変形による理想強度レベルの塑性変形挙動解析. 金属塑性の理解とモデリング. 2017 招待講演
  17. LIU, Tianwei, PING, De-hai, WATANABE, Ikumu, OHMURA, Takahito, Ohnuma Masato. Electron Diffraction Analysis of Martensite in Quenched High Carbon Steels. International Conference on Martensitic Transformations 2017. 2017
  18. PING, De-hai, WATANABE, Ikumu, OHMURA, Takahito, Ohnuma Masato. Electron Diffraction Analysis of Martensite in Quenched High Carbon Steels. International Conference on Martensitic Transformations 2017. 2017
  19. 大村 孝仁. Advanced Nano-mechanical Characterization of bcc Irons for Better Performance in Structural Materials. Frontiers in Materials Processing Applications, Research and Tec. 2017 招待講演
  20. 大村 孝仁. Advanced Nano-mechanical Characterization for Better Performance in Structural Materials. 9th US-Korea-Japan Berkeley Symposium. 2017 招待講演
  21. ルジック ジョバナ, 江村 聡, 渡邊 育夢, 大村 孝仁. Investigation of the Mo distribution through the large β-phase grains and its influence on elastic modulus of Ti-12Mo alloy by nanoindentation test. International Conference The Serbian Society for Ceramic Materia. 2017
  22. 大塚聖良, 連川貞弘, 井 誠一郎, 大村 孝仁. 高温ナノイン デンテーション法を用いた純アルミニウムにおける塑性変形開始挙動の温度依存性の観察. 平成29年度 合同学術講演会. 2017
  23. 榎並武郎, 連川貞弘, 井 誠一郎, 大村 孝仁. TEM内その場変形法を用いた純アルミニウムにおける転位運動と力学応答の調査. 平成29年度 合同学術講演会. 2017
  24. ルジック ジョバナ, 江村 聡, 渡邊 育夢, 大村 孝仁. Analysis of the influence of VGS structure on mechanical properties of Ti-12Mo alloy. Metallurgical & Materials Engineering Congress of South-East Eur. 2017
  25. PING, De-hai, MAN, Tinghui, LIU, Tianwei, OHMURA, Takahito, TOMOTA, Yo, Ohnuma Masato. In-Situ heating TEM study on twinned martensite in quenched Fe-1.4C alloys. 日本鉄鋼協会第173回春季講演大会. 2017
  26. 南 龍之介, 北嶋 具教, 伊藤 勉, 大村 孝仁, 芹澤愛, 御手洗 容子. Ti-al-Mo合金の組織と力学特性. 日本金属学会 第160回講演大会. 2017
  27. 満 延慧, リウ ティアンウェイ, 平 徳海, 大村 孝仁. Tempering behavior of twinned region in a 0.2mass% C martensite steel studied by in situ TEM observation. 日本金属学会2017年春期講演大会. 2017
  28. 平 徳海, 満 延慧, リウ ティアンウェイ, 大村 孝仁, 友田 陽, 大沼正人. In-Situ heating TEM study on twinned martensite in quenched Fe-1.4C alloys. 日本鉄鋼協会第173回春季講演大会. 2017
  29. 和田 悠佑, 関戸 信彰, 中村純也, 大村 孝仁, 吉見享祐. ナノインデンテーション法を用いたMAX相Ti2AlCにおける塑性変形開始挙動の方位依存性. 日本金属学会2017春期講演大会. 2017
  30. MAN, Tinghui, LIU, Tianwei, PING, De-hai, OHMURA, Takahito. Tempering behavior of twinned region in a 0.2mass% C martensite steel studied by in situ TEM observation. 日本金属学会2017年春期講演大会. 2017
2016
  1. LIU, Tianwei, PING, De-hai, OHMURA, Takahito, 大沼 正人. TEM characterization of omega-Fe phase in quenched carbon steels. 5th Asian Conference on Heat Treatment and Surface Engineering. 2016
  2. PING, De-hai, LIU, Tianwei, OHMURA, Takahito, 大沼 正人. The important role of omega-Fe phase in carbon steels on heat treatment. 5th Asian Conference on Heat Treatment and Surface Engineering. 2016
  3. 大村 孝仁. Collective Motion of Dislocation Associated with Local Plasticity Initiation and Macroscopic Properties in bcc Fe Alloys. MS&T 2016. 2016 招待講演
  4. 大村 孝仁. 日本の目指す自動車用革新鋼板の開発. ものづくり日本会議 第7回新産業技術促進検討会. 2016 招待講演
  5. 関戸 信彰, 吉見 享祐, 中村 純也, 大村 孝仁. 局所力学特性評価装置を用いた塑性変形開始挙動の観測と金属間化合物への応用. 2016年秋期講演大会 . 2016
  6. 平 徳海, リウ ティアンウェイ, 大村 孝仁, 大沼正人. Metastable ω-Fe in quenched Fe-C alloys. 日本鉄鋼協会第172回秋季講演大会. 2016
  7. LIUTianwei, 大村孝仁, 平徳海, 大沼正人. Electron diffraction analysis of martensite in quenched Fe-C alloys. 日本金属学会2016年秋期講演大会. 2016
  8. オウ エンショ, 大村 孝仁, 友田 陽. フェライト・セメンタイト鋼の回折ピーク幅拡がりと界面性格の関係. 鉄鋼協会秋季講演大会. 2016
  9. 井 誠一郎, 大村 孝仁. Al-Mg合金の局所力学応答に及ぼすMgの影響. 日本金属学会 2016年秋期大会. 2016
  10. 平 徳海, 大村 孝仁, 大沼 正人. Metastable omega phase in carbon and nitrogen steels. 9th Pacific Rim International Conference on Advanced Materials a. 2016
  11. 大村 孝仁. ナノインデンテーションによる機械的特性評価. 大阪府立産業技術総合研究所ナノインデンテーションセミナー. 2016 招待講演
  12. 大村 孝仁. Advanced Nano-mechanical Characterization of BCC Irons for Better Performance in Structural Materials. 2016 MOST-NIMS Workshop. 2016 招待講演
  13. 大村 孝仁. Advanced Nano-mechanical Characterization of bcc Irons for Better Performance in Structural Materials. Thermec 2016. 2016 招待講演
  14. 大村 孝仁. 自動車用ハイテン材の開発動向. 車の軽量化技術展. 2016 招待講演
  15. 大村 孝仁. Advanced nano-mechanical characterization of bcc irons for better performance in structural materials. Keynote International Symposium on Plasticity. 2016 招待講演
2015
  1. 平 徳海, 大沼 正人, 大村 孝仁. The discovery of ω-Fe in common steels by TEM and XRD. The 2nd East-Asia Microscopy Conference. 2015
  2. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Nano-mechanical Testing and Dislocation Motion in BCC Iron. The Fifth International Indentation Workshop. 2015
  3. 大村 孝仁. ナノインデンテーション基礎講座. 機能薄膜部会 ナノ・キャラクタリゼイション専門部会第5回研究会. 2015 招待講演
  4. 大村 孝仁. Direct observation of dislocation motion and related nano-mechanical behavior in bcc iron. MS&T15. 2015 招待講演
  5. 三浦誠司, 鈴木詩織, 関戸 信彰, 大村 孝仁, T. Endo, 池田賢一. シェブロンノッチマイクロ試験片によるNb-Si金属間化合物単結晶の破壊靱性測定. Intermetallics 2015. 2015 招待講演
  6. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Advanced Nano-mechanical Characterization of BCC Irons for Better Performance in Structural Materials. Technical University Delft Seminar. 2015 招待講演
  7. 関戸 信彰, 大村 孝仁, 鈴木 拓哉, 津﨑 兼彰, 沼倉宏. 鉄の塑性変形開始挙動に及ぼす固溶元素の影響. 日本鉄鋼協会第170回秋季講演大会 . 2015
  8. 関戸 信彰, 高田 尚記, 竹山 雅夫, 大村 孝仁, 原 徹, Michael Figueroa, J.H. Perepezko. Mo-Nb-Si-B四元系 BCC/T1/T2 Interwoven 組織の三次元観察. 日本金属学会 2015年秋期大会. 2015
  9. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Advanced Nano-mechanical Characterization of BCC Irons for Better Performance in Structural Materials. 2015 NIMS-NTU Joint Workshop. 2015 招待講演
  10. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. 「インデンテーションのTEMその場観察」. 第4回鉄鋼科学セミナー. 2015 招待講演
  11. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Dislocation motion and related nano-mechanical behavior in bcc iron. ICSMA-17. 2015
  12. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Advanced Nano-mechanical Characterization of BCC Irons for Better Performance in Structural Materials. Chongqing University Seminar. 2015 招待講演
  13. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Nano-mechanical testing and characterization of dislocation motion in bcc metals. International Workshop on Materials behavior at the Micro- and N. 2015 招待講演
  14. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Nano-mechanical Testing in Various Conditions for Further Understanding of Materials. TMS2015. 2015 招待講演
  15. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰. Advanced Nano-mechanical Characterization of BCC Irons for Better Performance in Structural Materials. 3rd International Doctoral Student Symposium on Material Science. 2015 招待講演
2014
  1. 大村 孝仁. Nano-mechanical behavior and dislocation motion of bcc metals. ITRI-NIMS Symposium. 2014 招待講演
  2. 大村 孝仁. Advanced nano-mechanical characterization of metals for better performance in structural materials. The 3rd International Symposium on Hybrid Materials and Processi. 2014 招待講演
  3. 大村 孝仁. Dislocation motion and related nano-mechanical behavior of bcc iron. The 4th International Symposium on Steel Science. 2014 招待講演
  4. 大村 孝仁. Dislocation motion and mechanical behavior of bcc metals investigated through TEM in-situ deformation. KIM-JIM Symposium, 2014. 2014 招待講演
  5. 大村 孝仁. TEM内その場変形による転位挙動-力学応答の解析. 日本金属学会/日本鉄鋼協会 九州支部 秋季講演会. 2014 招待講演
  6. 鈴木詩織, 三浦誠司, 関戸 信彰, 大村 孝仁. マイクロサイズ破壊試験法によるNb5Si3の破壊靭性値評価. 日本金属学会2014年秋期講演大会. 2014
  7. 関戸 信彰, 大村 孝仁, 津﨑 兼彰. FCC純金属のナノインデンテーション挙動. 日本金属学会2014年秋期講演大会. 2014
  8. ZYWICKIPawe, 平 徳海, 大村 孝仁, 土谷 浩一, 御手洗 容子. Influence of severe plastic deformation on microstructure in Ti-30Nb-3Pd alloy. Japan Institute of Metals Fall Meeting 2014. 2014
  9. 鈴木 拓哉, 関戸 信彰, ザン リン, 大村 孝仁. Fe合金の局所力学挙動に及ぼすNi, Siの影響. 2014年日本金属学会春期(第154回)講演大会. 2014
  10. 大村 孝仁, ザン リン, 鈴木 拓哉, 関戸 信彰, 津﨑 兼彰. 固溶元素と転位の相互作用. 日本金属学会2014春季講演大会. 2014 招待講演
  11. 大村 孝仁. 中性子線活用ー鉄鋼産業からの期待. 特殊利用中性子源ネットワーク研究会. 2014 招待講演
  12. 関戸 信彰, 大村 孝仁, 関戸 薫子, 中野 克哉, 沼倉宏, 津﨑 兼彰. ナノインデンテーション測定で観測されるPop-in現象に及ぼす諸因子. 第1回グリーンエネルギー材料のマルチスケール創製研究会. 2014
2013
  1. 葉 術軍, 松本 明善, 戸叶 一正, 大村 孝仁, 熊倉 浩明. IMD法とPIT法をミックスした方法による高臨界電流密度MgB2線材の作製. 第88回低温工学・超電導学会. 2013
  2. 葉 術軍, 松本 明善, 戸叶 一正, 大村 孝仁, 熊倉 浩明. High-performance MgB2 superconducting wires for use under liquid-helium-free conditions fabricated using internal Mg diffusion process. The 26th International Superconductivity Symposium (ISS2013). 2013
  3. マ ドンシャ, 張 治宇, 松本 真治, Ryo Teranishi, 大村 孝仁, 木吉 司. Delamination study on REBCO conductors due to screening current. ISS 2013. 2013
  4. 大村 孝仁. 局所力学挙動評価による粒界近傍の変形挙動解析. 日本鉄鋼協会自主フォーラム「鉄鋼材料の結晶界面物性とその制御」. 2013 招待講演
  5. 大村 孝仁. ナノインデンテーション法による薄膜の機械的特性評価と高機能化への応用. JTCセミナー. 2013 招待講演
  6. HASEGAWA, Akira, YE, Shujun, TAKEGUCHI, Masaki, MATSUMOTO, Akiyoshi, TOGANO, Kazumasa, OHMURA, Takahito, KUMAKURA, Hiroaki. Distribution of MgO Nano-inclusions in Superconductor MgB2 Wires Fabricated with Internal Magnesium Diffusion Process Observed b. The 1st East-Asia Microscopy Conference (EAMC-1). 2013 招待講演
  7. 鈴木 拓哉, 関戸 信彰, ザン リン, 大村 孝仁. Fe合金の局所力学挙動におよぼす添加元素の影響. 2013年日本金属学会秋期(第153回)講演大会. 2013
  8. 関戸 信彰, 大村 孝仁, 津﨑 兼彰. 高周波グロー放電スパッタ(rf-GDS)を利用したナノインデンテーション用 バルクサンプルに対する表面仕上げ法の試行. 2013年日本金属学会秋期大会. 2013
  9. 鈴木 拓哉, 関戸 信彰, ザン リン, 大村 孝仁. Fe合金の局所力学挙動におよぼす添加元素の影響. 2013年日本金属学会秋期(第153回)講演大会. 2013
  10. 葉 術軍, 長谷川 明, 松本 明善, 戸叶 一正, 張 雲超, 竹口 雅樹, 寺西 亮, 大村 孝仁, 熊倉 浩明. Improvement of critical current properties of internal Mg diffusion (IMD)&#8211;processed MgB2 wires. EUCAS2013 - European Conference on Applied Superconductivity. 2013
  11. HASEGAWA, Akira, YE, Shujun, TAKEGUCHI, Masaki, MATSUMOTO, Akiyoshi, TOGANO, Kazumasa, OHMURA, Takahito, KUMAKURA, Hiroaki. Distribution of MgO nanocrystals in superconductor MgB2 wires observed with TEM tomography. Microscopy Conference (MC) 2013. 2013
  12. 鈴木 拓哉, 関戸 信彰, ザン リン, 大村 孝仁. Influence of Si Content on Nano-Scale Deformation Behavior of Fe-Si Binary Alloy. PRICM-8. 2013
  13. 鈴木 拓哉, 関戸 信彰, ザン リン, 大村 孝仁. Influence of Si Content on Nano-Scale Deformation Behavior of Fe-Si Binary Alloy. PRICM-8. 2013
  14. OSADA, Toshio, GU, Yuefeng, NAGASHIMA, Nobuo, YUAN, Yong, HARADA, Hiroshi, OHMURA, Takahito. Grain Boundary Strengthening in Ni-Co base Polycrystalline Superalloy. International symposium on Strength of Fine Grained Materials. 2013
  15. 大村 孝仁. Nano-scale Deformation Behavior of Metals Associated with Various Lattice Defects. 2013 International Workshop on Advancing Materials Performance f. 2013 招待講演
  16. 大村 孝仁. 金属材料のナノ力学挙動解析によるマクロ特性の理解. 北大-NIMS材料研究セミナー 第1回:構造材料. 2013 招待講演
  17. 大村 孝仁. Nanoindentation-induced deformation behavior of metals. 1st Workshop of Science and Technology of Materials Science. 2013 招待講演
  18. 鈴木 拓哉, 関戸 信彰, ザン リン, 大村 孝仁. Fe-Si二元系合金の局所力学挙動におよぼすSi量の影響. 2013年日本金属学会春期(第152回)講演大会. 2013
  19. 笠井 一輝, 村上 秀之, 大村 孝仁, 野田 和彦. アルミナイズを施したNi基単結晶超合金の組織変化に及ぼす基材表面処理の影響. 日本金属学会春季講演大会. 2013
  20. 鈴木 拓哉, 関戸 信彰, ザン リン, 大村 孝仁. Fe-Si二元系合金の局所力学挙動におよぼすSi量の影響. 2013年日本金属学会春期(第152回)講演大会. 2013
  21. 大村 孝仁. ナノキャラクタリゼイションが果たす役割. 日本真空学会 機能薄膜部会 ナノ・キャラクタリゼイション研究部. 2013 招待講演
  22. 大村 孝仁. 局所力学挙動解析による変形素過程解析. 第1回新日鐵住金-NIMS若手研究者交流会. 2013 招待講演
  23. 大村 孝仁. 局所力学特性評価による粒界近傍の変形挙動解析. 材料の組織と特性部会 「鉄鋼材料の結晶界面物性とその制御」. 2013 招待講演
  24. 大村 孝仁. Advanced Techniques of Microstructural and Mechanical Characterization in Nano-scale for Structural Materials. NIMS-台湾大学ワークショップ2013. 2013 招待講演
2012
  1. ザン リン, 大村 孝仁, 関戸 薫子, 津﨑 兼彰. BCC単結晶におけるTEM その場変形. 2012 MRS Fall Meeting & Exhibit. 2012
  2. 中野 克哉, 大村 孝仁, 関戸 信彰, 関戸 薫子, 沼倉宏, 津﨑 兼彰. Fe-C二元系合金の局所力学特性に及ぼす微量固溶炭素の影響. 日本鉄鋼協会 第164回秋季講演大会. 2012
  3. 大村 孝仁. Initiation of plasticity of metals with various lattice defects investigated through nanoindentation technique. 6th Korea-Japan Berkeley Symposium. 2012
  4. 大村 孝仁. ナノインデンテーションによる降伏現象の素過程解析. 計算工学による組織と特性予測技術II 研究会. 2012 招待講演
  5. 中野 克哉, 大村 孝仁, 関戸 信彰, 関戸 薫子, 沼倉宏, 津﨑 兼彰. Fe-C二元系合金における塑性変形開始挙動に及ぼす炭素の影響. NIMS CONFERENCE 2012. 2012
  6. 大村 孝仁. 構造材料研究における推進課題. ナノテクノロジー・材料分野俯瞰ワークショップ. 2012 招待講演
  7. ザン リン, 大村 孝仁, 関戸 薫子, 原 徹, 中島 清美, 津﨑 兼彰. TEM in-situナノインデンテーション法の応用. 日本顕微鏡学会第68回学術講演会. 2012
  8. 大村 孝仁, 関戸 薫子, ザン リン, 中島英治, 津﨑 兼彰. 粒界近傍における局所領域変形挙動の解析. 日本鉄鋼協会材料の組織と特性部会加工硬化特性と組織研究会シンポジ. 2012 招待講演
  9. 大村 孝仁. 鉄鋼材料の局所力学挙動評価による強化機構解析. 日本金属学会2012年春季大会. 2012 招待講演
  10. 大村 孝仁, 関戸 薫子, 津﨑 兼彰, 首藤洋志, 横井龍雄, 藤田展弘. DP鋼における打ち抜き穴断面の局所力学特性. 日本鉄鋼協会 第163回春季講演大会. 2012
  11. 中野 克哉, 大村 孝仁, 関戸 信彰, 関戸 薫子, 沼倉宏, 津﨑 兼彰. Fe-C二元系合金における塑性変形開始挙動に及ぼす炭素の影響. 日本鉄鋼協会 第163回春季講演大会. 2012
  12. 大村 孝仁. Indentation-induced plasticity of metals with various lattice defects. MPIE-NIMS Seminar. 2012 招待講演
  13. 大村 孝仁. ナノインデンテーションおよび最新関連技術の概要とその応用. JFEスチール(株)スチール研究所セミナー. 2012 招待講演
2011
  1. 関戸 信彰, 大村 孝仁, 津﨑 兼彰. FCC純金属のナノインデンテーション挙動に与える表面仕上げの影響. 2011年日本金属学会秋期大会. 2011
  2. 中野 克哉, 関戸 薫子, 大村 孝仁, 沼倉宏, 津﨑 兼彰. Fe-C二元系合金における塑性変形開始挙動の解析. 2011年度秋期大会. 2011
  3. 大村 孝仁. Indentation-induced deformation behavior in the vicinity of grain boundary of Fe alloys. Materials Science & Technology 2011. 2011 招待講演
  4. 大村 孝仁. Plasticity initiation behavior associated with lattice defects in steels. The 6th SNU-KIMS-Kyusyu U. Joint Symposium on Steel Research. 2011 招待講演
  5. 大村 孝仁. Indentation-induced plasticity of metals with various lattice defects. Nanomechanical Testing in Materials Research and Development . 2011
  6. 大村 孝仁, 関戸 薫子, ザン リン, 中島英治, 津﨑 兼彰. 粒界近傍における局所領域変形挙動の解析. 日本鉄鋼協会第162回秋季講演大会. 2011 招待講演
  7. 大村 孝仁, 関戸 薫子, ザン リン, 津﨑 兼彰. 鉄合金における種々の格子欠陥と塑性変形開始挙動の関係. 高温強度と組織形成の材料科学研究会. 2011
  8. 大村 孝仁, ザン リン, 関戸 薫子, 津﨑 兼彰. Indentation-induced plasticity initiation behavior of metals. IIW4 - 4th International Indentation Workshop 2011. 2011 招待講演
  9. 大村 孝仁, 原 徹, ザン リン, 津﨑 兼彰. Fe-C鋼におけるpop-in挙動に対する転位密度の影響. 4th International Indentation Workshop. 2011
  10. 大村 孝仁, ザン リン, 関戸 薫子, 原 徹, 津﨑 兼彰. Fe-3%Si 単結晶におけるTEMその場ナノインデンテーション. 日本顕微鏡学会第67回学術講演会. 2011
  11. 大村 孝仁. TEMその場インデンテーションの可能性. オミクロンジャパン 第11回ナノインデンテーション研究会. 2011 招待講演
  12. バオ ゼビン, ザン リン, 大村 孝仁, 村上 秀之, 御手洗 容子. Mechanical and oxidation properties of aluminized Ir-based alloys. JIM 2011 Spring Meeting. 2011
  13. 大村 孝仁, ザン リン, 関戸 薫子, 津﨑 兼彰. ナノインデンテーションによる鉄鋼材料の局所力学挙動解析. 日本鉄鋼協会 第161回春季講演大会. 2011 招待講演
2010
  1. 大村 孝仁. ナノインデンテーションの効果的活用法. オミクロンナノテクノロジージャパン第10回ナノインデンテーション. 2010 招待講演
  2. 大村 孝仁. ナノインデンテーションによる塑性変形の開始挙動の解析. 日本材料学会関東支部セミナー. 2010 招待講演
  3. 土谷 浩一, 梅 青松, ザン リン, 大村 孝仁. SPDによる結晶粒微細化がTiNiの弾性的性質に与える効果. GSAM2010. 2010 招待講演
  4. ザン リン, 大村 孝仁, 津﨑 兼彰, 柴田曉伸. Fe-Niレンズマルテンサイトにおける局部変形挙動. International conference on advanced steels 2010. 2010
  5. 大村 孝仁. 薄膜の機械的特性評価. 日本表面科学会 第13回薄膜基礎講座. 2010 招待講演
  6. 関戸 薫子, 大村 孝仁, 原 徹, ザン リン, 津﨑 兼彰. 鋼の塑性変形開始挙動に対する初期転位密度と固溶Cの影響. 日本鉄鋼協会第160回秋季講演大会. 2010
  7. 大村 孝仁, ザン リン, 関戸 薫子, 津﨑 兼彰. 粒界近傍における局所力学挙動解析. 日本鉄鋼協会 第160回秋季講演大会. 2010
  8. 梅 青松, ザン リン, 土谷 浩一, 高 鴻, 大村 孝仁, 津﨑 兼彰. ナノ構造NiTiにおける弾性定数の結晶粒径依存性. JIM 2010 autumn meeting. 2010
  9. ザン リン, 大村 孝仁, 関戸 薫子, 中島 清美, 原 徹, 津﨑 兼彰. TEM内その場ナノインデンテーション法による変形の観察. 日本鉄鋼協会第160回秋季講演大会. 2010
  10. ザン リン, 大村 孝仁, 江村 聡, 関戸 信彰, 殷 福星, 閔 小華, 津﨑 兼彰. 超微小粒Alの局所領域の変形挙動. The 6th International Conference on Advanced Materials Processin. 2010
  11. 大村 孝仁. 薄膜・多層膜における機械的特性の基礎と評価法. 情報機構セミナー. 2010 招待講演
  12. 大村 孝仁, ザン リン, 関戸 薫子, 津﨑 兼彰. Characterization of local deformation behavior of metals through nanoindentation technique. STAC-4. 2010 招待講演
  13. 関戸 薫子, 大村 孝仁, 原 徹, ザン リン, 津﨑 兼彰. 鋼の圧入変形における転位と固溶Cの相互作用. 日本鉄鋼協会 第159回春期講演大会. 2010
2009
  1. 大村 孝仁. ナノおよびピコインデンテーション法を用いたミクロスコピック力学特性評価. 豊田中央研究所研究会. 2009 招待講演
  2. 大村 孝仁. Local mechanical characterization of fine-structured steels through nanoindentation technique. The 4th KIMS-Kyusyu univ. Joint Symp. on Steel Research. 2009
  3. 大村 孝仁. 薄膜の機械的特性評価. 第12回薄膜基礎講座. 2009 招待講演
  4. ザン リン, 大村 孝仁, 津﨑 兼彰. Fe-Niレンズマルテンサイトにおける局部変形挙動. 日本金属学会2009年秋期大会. 2009
  5. 関戸 薫子, 大村 孝仁, ザン リン, 津﨑 兼彰. 鉄鋼の圧入変形挙動に及ぼす固溶Cの影響. 日本金属学会 2009年秋期(第145回)大会. 2009
  6. 大村 孝仁. ナノインデンテーションの金属材料研究への活用. 住友金属工業 総合技術研究所 研究会. 2009 招待講演
  7. 大村 孝仁, ザン リン, 津﨑 兼彰. INDENTATION-INDUCED LOCAL DEFORMATION BEHAVIOR OF ULTRA-FINE GRAINED ALMINUM PRODUCED BY SEVERE PLASTIC DEFORMATION. THERMEC 2009. 2009 招待講演
  8. 大村 孝仁, ザン リン, 津﨑 兼彰. Indentation-induced plasticity initiation at a stress level of an ideal strength. International Workshop on Probing the Limits of Strength. 2009
  9. 大村 孝仁. ナノインデンテーション法による金属材料への試み. 第6回ナノインデンテーション研究会. 2009 招待講演
  10. 大村 孝仁. TEMナノインデンテーション法による転位と粒界相互作用のその場観察. 日本材料学会第58期第1回分子動力学部門委員会講演会. 2009 招待講演
  11. 大村 孝仁, ザン リン, 津﨑 兼彰. Evaluation of strengthening factors for bulk metals through nanoindentaiton technique. ISOPE-2009. 2009 招待講演
  12. 大村 孝仁. ナノインデンテーションの原理と微細組織材料への応用. 第5回プローブ顕微鏡による表面分析研究会. 2009 招待講演
  13. 大村 孝仁, ザン リン, 津﨑 兼彰. Indentation-induced deformation behavior of UFG pure Al. 5th Berkeley Symposium on Advanced Materials. 2009
  14. 大村 孝仁. ナノインデンテーションの原理と構造材料への応用. 新日本製鉄(株)鉄鋼研究所セミナー. 2009 招待講演
2008
  1. ザン リン, 大村 孝仁, 江村 聡, 関戸 信彰, 殷 福星, 閔 小華, 堀田善治, 津﨑 兼彰. Evaluation of matrix strength of ECAPed pure Al by nanoindentation. GSAM2008. 2008
  2. ザン リン, 大村 孝仁, 江村 聡, 関戸 信彰, 殷 福星, 閔 小華, 堀田善治, 津﨑 兼彰. Evaluation of matrix strength of ECAPed pure Al by nanoindentation. 日本金属学会2008年秋期(第143回)大会. 2008
  3. 大村 孝仁, 津﨑 兼彰. ナノインデンテーション法による粒界強化機構の評価. 日本金属学会2008年春季大会. 2008
  4. 大村 孝仁, 津﨑 兼彰. 転位源および転位運動障壁としての粒界の働き. 日本鉄鋼協会第155回春季講演大会. 2008
  5. 大村 孝仁. 薄膜の機械的性質とその評価. 情報機構セミナー. 2008 招待講演
  6. 大村 孝仁. 薄膜の機械的特性の測定・評価方法. サイエンス&テクノロジー 技術セミナー. 2008 招待講演
2007
  1. 大村 孝仁. 粒界近傍における局所領域変形機構の解析. 特定領域「巨大ひずみ」個別テーマ検討会「粒界・転位相互作用」. 2007 招待講演
  2. 大村 孝仁, 津﨑 兼彰. 粒界近傍における局所領域変形挙動の解析. 日本鉄鋼協会 加工硬化特性と組織研究会 第2回研究会. 2007
  3. 大村 孝仁, 澤田 浩太, 木村 一弘, 津﨑 兼彰. SUS316 鋼の長時間時効過程における析出強化機構のナノスケール解析. 日本金属学会2007年秋期大会. 2007
  4. 大村 孝仁, 澤田 浩太, 木村 一弘, 津﨑 兼彰. SUS316鋼の長時間時効析出挙動と局所力学特性. 先進材料の高温強度と組織研究会「平成19年度夏の学校」. 2007
  5. 大村 孝仁, NA, 津﨑 兼彰, NA. Observation of dislocation-grain boundary interactions in martensitic steel through in-situ nanoindentation in a TEM. Workshop on in situ methods in nanomechanics. 2007
  6. OHMURA, Takahito. Analysis of grain boundary effect of bulk polycrystalline materials through nanomechanical characterization. Third International Indentation Workshop. 2007 招待講演
  7. 大村 孝仁. ナノインデンテーション法による局所力学特性解析. 2007年 アルバック・ファイ技術講演会. 2007 招待講演
  8. 大村 孝仁. ナノインデンテーション法による粒界強化機構の解析. 東北大学金属材料研究所高純度金属材料学分野セミナー. 2007 招待講演
  9. OHMURA, Takahito. A new aspect of the strengthening factors of Fe-C martensite through characterization of nanoindentation-induced deformation behavior. The 1st International Symposium on Steel Science. 2007 招待講演
  10. 大村 孝仁. Indation-induced deformation behavior in the vicinity of grain boundaries: In-situ nanoindentation in a TEM. HIGH-ACCURACY NANOINDENTATION RESEARCH IN NORDIC COUNTRIES. 2007 招待講演
  11. 大村 孝仁, 津﨑 兼彰. 局所力学特性評価によるマルテンサイト鋼の強化機構解析の新しいアプローチ. 日本鉄鋼協会 第153回春季講演大会. 2007
  12. 大村 孝仁, 津﨑 兼彰. ナノインデンテーション法による鉄鋼材料の強化機構解析. 神戸製鋼所 材料研究所研究会. 2007 招待講演
  13. 殷 福星, 大村 孝仁. 予歪みを付与したIF鋼の変形組織及び局部力学応答. 日本鉄鋼協会降伏強度と組織研究会. 2007
2006
  1. 大村 孝仁. ナノインデンテーションによるマルテンサイト鋼の強化機構解析. 第3回 NIMS-JAEA構造材料情報交流会. 2006 招待講演
  2. 大村 孝仁. 圧入負荷過程の弾性-弾塑性遷移挙動と材料の組織因子. Hysitron社技術セミナー2006. 2006 招待講演
  3. 大村 孝仁, 津﨑 兼彰. ナノインデンテーション法による粒界強化機構の解析. 第213回材料科学談話会. 2006 招待講演
  4. 大村 孝仁, 澤田 浩太, 津﨑 兼彰, 木村 一弘. Nano-mechanical characterization of the multi-phase microstructure of long-term aged type 316 stainless steel. 日本鉄鋼協会 第152回秋季講演大会. 2006
  5. 大村 孝仁. ナノインデンテーション法による局所領域力学特性評価. Surface Science & Nanotechnology 2006. 2006 招待講演
  6. 大村 孝仁, 津﨑 兼彰. Microstructure-related Local Deformation Behavior Characterized through Combination of Nanoindentation and Scanning Probe Microscopy. The 16th International Microscopy Congress. 2006
  7. 大村 孝仁. TEM in-situ ナノインデンテーションによる転位―粒界相互作用の観察. 日本材料学会 第119回破壊力学部門委員会. 2006 招待講演
  8. 大村 孝仁, 澤田 浩太, 津﨑 兼彰, 木村 一弘. SUS316ステンレス鋼の高温長時間時効材における局所力学特性の不均一性評価. 先進材料の高温強度と組織研究会. 2006
  9. 津﨑 兼彰, 大村 孝仁, Fu-Gao Wei. REVISIT TO FE-C MARTENSITE: STRENGTHENING MECHANISM AND HYDROGEN TRAPPING CAPABILITY. THERMEC. 2006 招待講演
  10. 大村 孝仁, 津﨑 兼彰. ナノインデンテーションによる粒界近傍の変形挙動の素過程解析. 新日鐵 総合技術センター セミナー. 2006 招待講演
  11. 大村 孝仁. ナノインデンテーションによる局所力学特性評価に基づく強化因子の理解と組織設計. 新日本製鐵 総合技術センター 研究会. 2006 招待講演
  12. 大村 孝仁. Evaluation of strengthening factors of Fe-C martensitic steels using nanoindentation technique . National Center for Electron Microscopy Seminar. 2006 招待講演
  13. 殷 福星, 大村 孝仁. ナノインデンテーションを用いた粒界と粒内変形挙動の検討. 日本鉄鋼協会 組織と降伏強度研究会. 2006
2005
  1. パン ジン, 大村 孝仁, 武田 良彦, Oleg PLAXINE, 雨倉 宏, 岸本 直樹. ナノインデンテーションした結晶性シリカへのイオン注入効果. 16th MRS-Japan Academic Symposium. 2005
  2. 大村 孝仁. バルク材料における強度発現機構の素過程解析. Hysitron社 ユーザーズミーティング 2005. 2005 招待講演
  3. 大村 孝仁, 津﨑 兼彰. ナノインデンテーションによる粒界近傍の変形挙動解析. 日本金属学会2005年秋期大会. 2005
  4. OHMURA, Takahito. Indentation-Induced Deformation Behavior in Martensitic Steel Observed through In Situ Nanoindentation in a Transmission Electron Microscopy. The 3rd International Conference on Nanomaterials by Severe Plas. 2005
  5. 大村 孝仁, 津﨑 兼彰. ナノスケール力学特性評価による超微細粒材料の強化機構解析. 第2回阪大COE-NIMS連携シンポジウム. 2005 招待講演
  6. 澤田 浩太, 大村 孝仁, 大場 敏夫, 阿部 冨士雄, 津﨑 兼彰, 木村 一弘, 野中勇. 耐熱鋼の長時間時効・クリープによる弾性係数変化. 日本金属学会 先進材料の高温強度と組織研究会. 2005
  7. 大村 孝仁, 津﨑 兼彰. Nanoindentation-induced Deformation Behavior and Its Relation to Macroscopic Properties of High-strength Steels. 第9回超鉄鋼ワークショップ. 2005
  8. 大村 孝仁, 津﨑 兼彰. Nano-scale analysis of grain boundary effect on strength of steels through nanoindentation technique. 3rd Berkeley Symposium on Advanced Materials. 2005
  9. 大村 孝仁. ナノインデンテーションによる微細複相組織材料の強化機構解析. 第4回 構造材料の強度と破壊 フォーラム. 2005 招待講演
  10. 大村 孝仁. ナノインデンテーションの金属への応用. ナノメカニックス研究会. 2005 招待講演
  11. 大村 孝仁. ナノインデンテーションによる微細複相組織の強化機構解析. 新日本製鐵 広畑技術研究部 研究会. 2005 招待講演
2004
  1. OHMURA, Takahito. Evaluation of grain boundary effect of Fe-C martensitic steels through nanoindentation technique. 5th Pacific Rim International Conference on Advanced Materials a. 2004
  2. 大村 孝仁, 津﨑 兼彰. Grain Boundary Effect on the strength of Fe-C Martensitic Steels Evaluated by Nanoindentation Technique. Seminor on steel research and service performance. 2004 招待講演
  3. 大村 孝仁. ナノインデンテーションによる局所領域力学特性評価とマクロ特性. 日本原子力研究所 物質科学セミナー. 2004 招待講演
  4. 大村 孝仁, 津﨑 兼彰. Evaluation of strengthening factors of tempered martensite using nanoindentation. 日本鉄鋼協会 第148回秋季講演大会. 2004
  5. OHMURA, Takahito. EVALUATION OF NANO-MECHANICAL PROPERTIES OF HIGH-STRENGTH STEELS USING NANOINDENTATION. ICEM12- 12th International Conference on Experimental Mechanics. 2004
  6. 大村 孝仁, 津﨑 兼彰. ナノインデンテーションによる微細複相組織のマトリクス強度と粒界強化の分離評価. 高温材料設計研究会. 2004
  7. 大村 孝仁. ナノインデンテーションによる微細複相組織材料の強化機構解析. 材料科学談話会. 2004 招待講演
  8. 大村 孝仁, 津﨑 兼彰. Nano-mechanical Characterization of High-strength Martensitic Steels. 8th Ultra-steel workshop. 2004
  9. A. Minor, E. Stach, M. Jin, J.W. Morris, Jr., 大村 孝仁, W.A. Soer, J.Th. Hosson. Grain Boundary Phenomena Observed with in-situ Nanoindentation in a TEM. 8th Ultra-steel workshop. 2004 招待講演
  10. 大村 孝仁, A. Minor, E.A. Stach, J.W. Morris, Jr. The deformation behavior of Fe-C martensitic steel observed by in-situ nanoindentation in a TEM. 2004 MRS spring meeting. 2004
  11. 大村 孝仁, A.M. Minor, E.A. Stach, J.W. Morris, Jr.. The doformation of Fe-C martensite studied through in-situ nanoindentation in a TEM. 日本金属学会 2004年度春期大会. 2004
  12. 津﨑 兼彰, 大村 孝仁. 焼き戻しマルテンサイト鋼の組織とナノ硬さ分布. 日本鉄鋼協会フォーラム「鉄鋼材料のセメンタイトの有効利用」研究会. 2004

その他の文献 TSV

2016
  1. 津﨑兼彰, Takahito Ohmura, Kaneaki Tsuzaki, Goro Miyamoto, Naoya Kamikawa, 紙川尚也, 古原忠, Nobuaki Sekido, 宮本吾郎, 関戸信彰, Toru Hara, Tadashi Furuhara. 低炭素鋼中に相界面析出したVCナノ析出物の三次元観察. まてりあ(日本金属学会会報). 55 [12] (2016) 593
2011
  1. 大村 孝仁. 超鉄鋼プロジェクトがもたらした鉄鋼研究の新展開. 金属. 81 [8] (2011) 639-640
  2. TSUCHIYA, Koichi, MEI, Qingsong, ZHANG, Ling, OHMURA, Takahito. Effect of Grain Refinement by SPD on Elastic Properties in TiNi. Production of Multifunctional Materials Using Severe Plastic Deformation. (2011) 84-87
  3. 大村 孝仁. 高強度マルテンサイト鋼の強化機構解析の新展開. 金属. 81 [8] (2011) 649-654
2007
  1. 大村 孝仁. ナノインデンテーション法による局所変形挙動解析の新展開. 表面科学. (2007) 174
  2. TANAKA, Yoshihisa, Jenn Ming Yang, OHMURA, Takahito, Yu Fu Liu, KAGAWA, Yutaka. NANO-MECHANICAL CHARACTERIZATION OF DISCONTINUOUSLY REINFORCED TITANIUM COMPOSITE. The Proceeding of the 16th International Conference on Composite Materials . (2007) 9999
2005
  1. SAWADA, Kota, OHMURA, Takahito, OHBA, Toshio, TSUZAKI, Kaneaki, ABE, Fujio, KIMURA, Kazuhiro, 野中勇. Elastic properties of heat resistant steels after long-term creep exposure. Proc. of International conference on Creep and Fracture in High Temperature Components - Design and Life Assessment Issues. (2005) 268-279
  2. 大村 孝仁. ナノインデンテーション技術による微細複相組織の力学特性解析. 実験力学(日本実験力学会誌). 5 [1] (2005) 7-17

▲ページトップへ移動