SAMURAI - NIMS Researchers Database

HOME > プロフィール > シン アロク

シン アロク

シン アロク (SINGH, Alok) 0000-0001-5515-8305

Address
305-0047 茨城県つくば市千現1-2-1 [アクセス]

[論文] | [書籍] | [会議録] | [口頭発表] | [その他の文献] | [公開特許出願]

論文 TSV

2024
  1. Hidetoshi Somekawa, Rintaro Ueji, Alok Singh. Mechanical response in tension of twin-induced Mg alloys in wide strain rate regimes. Materials Science and Engineering: A. 897 (2024) 146319 10.1016/j.msea.2024.146319
  2. Hidetoshi Somekawa, Tomohito Tsuru, Alok Singh. Grain boundary plasticity in Mg binary alloys by segregation of p-block element. Materials Science and Engineering: A. 893 (2024) 146066 10.1016/j.msea.2023.146066
  3. Hirotaka Uryu, Tsunetomo Yamada, Koichi Kitahara, Alok Singh, Yutaka Iwasaki, Kaoru Kimura, Kanta Hiroki, Naoki Miyao, Asuka Ishikawa, Ryuji Tamura, Satoshi Ohhashi, Chang Liu, Ryo Yoshida. Deep Learning Enables Rapid Identification of a New Quasicrystal from Multiphase Powder Diffraction Patterns. Advanced Science. 11 [1] (2024) 2304546 10.1002/advs.202304546 Open Access
  4. Alok Singh, Hidetoshi Somekawa, Takanobu Hiroto, Machiko Ode, Karel Tesař, Jaroslav Čech, Toru Hara. Dispersion of stable quasicrystal phase by precipitation during extrusion in a Mg–Zn–Al alloy: Microstructure and mechanical properties. Materials Science and Engineering: A. 891 (2024) 145979 10.1016/j.msea.2023.145979
  5. Elango Chandiran, Yukiko Ogawa, Rintaro Ueji, Alok Singh, Hidetoshi Somekawa, Takahito Ohmura. Activation of non type dislocation in near <0001>-oriented Mg by Sc addition. Materials Science and Engineering: A. 890 (2024) 145927 10.1016/j.msea.2023.145927
  6. Hidetoshi Somekawa, Eri Nakagawa, Yuka Hara, Taku Moronaga, Yukiko Ogawa, Alok Singh, Takahito Ohmura. In-situ TEM observation of -axis extension twin nucleation in single crystalline Mg. Materials Science and Engineering: A. 890 (2024) 145895 10.1016/j.msea.2023.145895
  7. Digvijay Singh, Alok Singh, Takahiro Sawaguchi. Elucidating deformation pathways and interface characteristic of self-accommodated dual γ/ε phase microstructure in Fe–Mn–Si–Al alloy. Materials Characterization. 207 (2024) 113521 10.1016/j.matchar.2023.113521
2023
  1. Chang Liu, Koichi Kitahara, Asuka Ishikawa, Takanobu Hiroto, Alok Singh, Erina Fujita, Yukari Katsura, Yuki Inada, Ryuji Tamura, Kaoru Kimura, Ryo Yoshida. Quasicrystals predicted and discovered by machine learning. Physical Review Materials. 7 [9] (2023) 093805 10.1103/physrevmaterials.7.093805 Open Access
  2. Elango Chandiran, Yukiko Ogawa, Rintaro Ueji, Alok Singh, Hidetoshi Somekawa. Enhancement of damping capacity by deformation-induced martensitic transformation in Mg–Sc alloy. Materials Science and Engineering: A. 880 (2023) 145198 10.1016/j.msea.2023.145198
  3. Dennis Edgard Jodi, Tomonori Kitashima, Alok Singh, Makoto Watanabe. High-temperature microstructural stability of pure Ni fabricated by laser powder bed fusion using Gaussian and flat-top beam profiles. Materials Characterization. 200 (2023) 112897 10.1016/j.matchar.2023.112897 Open Access
2022
  1. Yukiko Ogawa, Alok Singh, Hidetoshi Somekawa. Damping property of phases of Mg–Sc measured by nano-DMA. MRS Communications. 12 [6] (2022) 1220-1224 10.1557/s43579-022-00298-y
  2. Hidetoshi Somekawa, Yukiko Ogawa, Yoshinori Ono, Alok Singh. Deformation behavior at cryogenic temperature in extruded Mg–Al–Zn alloy. Philosophical Magazine Letters. 102 [11-12] (2022) 396-406 10.1080/09500839.2022.2143592
  3. Yukiko Ogawa, Alok Singh, Hidetoshi Somekawa. Activation of non-basal slip in coarse-grained Mg-Sc alloy. Scripta Materialia. 218 (2022) 114830 10.1016/j.scriptamat.2022.114830
  4. Hidetoshi Somekawa, Masato Wakeda, Alok Singh. Enhancing ambient temperature grain boundary plasticity by grain refinement in bulk magnesium. Materials Science and Engineering: A. 848 (2022) 143424 10.1016/j.msea.2022.143424
  5. Hidetoshi Somekawa, Hitoshi Fukuoka, Alok Singh, Hideki Yamaura. Breakdown Trade-Off Relation of Mechanical Properties via Micro-alloying in Mg–Mn Alloys. Metallurgical and Materials Transactions A. 53 [3] (2022) 1110-1118 10.1007/s11661-021-06581-2
  6. Alok Singh, Takanobu Hiroto, Machiko Ode, Hiroyuki Takakura, Karel Tesař, Hidetoshi Somekawa, Toru Hara. Precipitation of stable icosahedral quasicrystal phase in a Mg-Zn-Al alloy. Acta Materialia. 225 (2022) 117563 10.1016/j.actamat.2021.117563
2021
  1. Alok Singh, Takanobu Hiroto, Hiroyuki Watanabe, Naoko Ikeo, Toshiji Mukai, Koichi Tsuchiya. Phase transformation and morphological features in a cold-worked CrMnFeCoNi high entropy alloy with Al addition. Materials Characterization. 182 (2021) 111556 10.1016/j.matchar.2021.111556
  2. Digvijay Singh, Dudekula A. Basha, Lars Wadsö, Dmytro Orlov, Yoshitaka Matsushita, Alok Singh, Santosh S. Hosmani. Evolution of gradient structured layer on AZ91D magnesium alloy and its corrosion behaviour. Journal of Alloys and Compounds. 882 (2021) 160659 10.1016/j.jallcom.2021.160659
  3. Hidetoshi Somekawa, Jangho Yi, Alok Singh, Koichi Tsuchiya. Microstructural evolution via purity grade of magnesium produced by high pressure torsion. Materials Science and Engineering: A. 823 (2021) 141735 10.1016/j.msea.2021.141735
  4. Arsath Abbasali Ayubali, Alok Singh, Balasivanandha Prabu Shanmugavel, K.A. Padmanabhan. A phenomenological model for predicting long-term high temperature creep life of materials from short-term high temperature creep test data. International Journal of Mechanical Sciences. 202-203 (2021) 106505 10.1016/j.ijmecsci.2021.106505
  5. Karel Tesař, Hidetoshi Somekawa, Alok Singh. Achieving Yield Symmetry in an Extruded Mg-Zn-Y Alloy by More Effective Dispersion of Quasicrystalline i-Phase. Metallurgical and Materials Transactions A. 52 [6] (2021) 2185-2194 10.1007/s11661-021-06209-5
2020
  1. Hidetoshi Somekawa, Dudekula Althaf Basha, Alok Singh, Tomohito Tsuru, Masatake Yamaguchi. Non-Basal Dislocation Nucleation Site of Solid Solution Magnesium Alloy. MATERIALS TRANSACTIONS. 61 [6] (2020) 1172-1175 10.2320/matertrans.mt-m2020040
  2. Karel Tesař, Hidetoshi Somekawa, Alok Singh. Development of texture and grain size during extrusion of ZA63 alloy containing stable quasicrystalline i-phase and its effect on tensile and compression strength. Journal of Alloys and Compounds. 849 (2020) 156340 10.1016/j.jallcom.2020.156340
  3. Hidetoshi Somekawa, Dudekula Althaf Basha, Alok Singh, Tomohito Tsuru, Hiroyuki Watanabe. Change in damping capacity arising from twin-boundary segregation in solid-solution magnesium alloys. Philosophical Magazine Letters. 100 [10] (2020) 494-505 10.1080/09500839.2020.1805132
  4. Digvijay Singh, Dudekula A. Basha, Alok Singh, Rupesh S. Devan, Santosh S. Hosmani. Microstructural and Passivation Response of Severely Deformed AISI 304 Steel Surface: The Role of Surface Mechanical Attrition Treatment. Journal of Materials Engineering and Performance. 29 [10] (2020) 6898-6911 10.1007/s11665-020-05161-6
  5. Reza Mahjoub, Dudekula Althaf Basha, Alok Singh, Michael Ferry, Nikki Stanford. The contrasting fracture behaviour of twin boundaries and general boundaries – A first principles study based on experimental observation. Materials Science and Engineering: A. 781 (2020) 139225 10.1016/j.msea.2020.139225
  6. M Kamalnath, B Mohan, Alok Singh, K Thirumavalavan. Development of Al1070-Quasicrystal (Al65Cu23Fe12) composites using friction stir processing and its mechanical characterization. Materials Research Express. 7 [2] (2020) 026535 10.1088/2053-1591/ab71c5 Open Access
  7. Alok Singh, D.A. Basha, Yoshitaka Matsushita, Koichi Tsuchiya, Zhaoping Lu, Tai-Gang Nieh, Toshiji Mukai. Domain structure and lattice effects in a severely plastically deformed CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds. 812 (2020) 152028 10.1016/j.jallcom.2019.152028
2019
  1. Hidetoshi Somekawa, Dudekula Althaf Basha, Alok Singh. Role of grain boundaries on ductility in Mg-Y alloys. Materialia. 8 (2019) 100466 10.1016/j.mtla.2019.100466
  2. Hidetoshi Somekawa, Dudekula Althaf Basha, Alok Singh. Deformation behavior at room temperature ranges of fine-grained Mg–Mn system alloys. Materials Science and Engineering: A. 766 (2019) 138384 10.1016/j.msea.2019.138384
  3. Hidetoshi Somekawa, Dudekula Althaf Basha, Alok Singh. Change in dominant deformation mechanism of Mg alloy via grain boundary control. Materials Science and Engineering: A. 746 (2019) 162-166 10.1016/j.msea.2019.01.018
2018
  1. Hidetoshi Somekawa, Alok Singh, Ryoji Sahara, Tadanobu Inoue. Excellent room temperature deformability in high strain rate regimes of magnesium alloy. Scientific Reports. 8 [1] (2018) 10.1038/s41598-017-19124-w Open Access
  2. P. Seenuvasaperumal, K. Doi, Dudekula Althaf Basha, Alok Singh, A. Elayaperumal, Koichi Tsuchiya. Wear behavior of HPT processed UFG AZ31B magnesium alloy. Materials Letters. 227 (2018) 194-198 10.1016/j.matlet.2018.05.076
  3. Hidetoshi Somekawa, Dudekula Althaf Basha, Alok Singh. Room temperature grain boundary sliding behavior of fine-grained Mg-Mn alloys. Materials Science and Engineering: A. 730 (2018) 355-362 10.1016/j.msea.2018.06.015
  4. Hidetoshi Somekawa, Alok Singh. Superior room temperature ductility of magnesium dilute binary alloy via grain boundary sliding. Scripta Materialia. 150 (2018) 26-30 10.1016/j.scriptamat.2018.02.034
  5. Alok Singh, Yoshiaki Osawa, Hidetoshi Somekawa, Toshiji Mukai. Effect of Solidification Cooling Rate on Microstructure and Mechanical Properties of an Extruded Mg-Zn-Y Alloy. Metals. 8 [5] (2018) 337 10.3390/met8050337 Open Access
  6. Alok Singh, Julian Rosalie. Lattice Correspondence and Growth Structures of Monoclinic Mg4Zn7 Phase Growing on an Icosahedral Quasicrystal. Crystals. 8 [5] (2018) 194 10.3390/cryst8050194 Open Access
  7. S.R. Agnew, A. Singh, C.A. Calhoun, R.P. Mulay, J.J. Bhattacharyya, H. Somekawa, T. Mukai, B. Clausen, P.D. Wu. In-situ neutron diffraction of a quasicrystal-containing Mg alloy interpreted using a new polycrystal plasticity model of hardening due to {10.2} tensile twinning. International Journal of Plasticity. 100 (2018) 34-51 10.1016/j.ijplas.2017.09.005 Open Access
  8. Dudekula Althaf Basha, Hidetoshi Somekawa, Alok Singh. Crack propagation along grain boundaries and twins in Mg and Mg–0.3 at.%Y alloy during in-situ straining in transmission electron microscope. Scripta Materialia. 142 (2018) 50-54 10.1016/j.scriptamat.2017.08.023
  9. Dehai Ping, Alok Singh, Shuqi Guo, Takahito Ohmura, Masato Ohnuma, Taichi Abe, Hidehiro Onodera. A Simple Method for Observing ω-Fe Electron Diffraction Spots from <112>α-Fe Directions of Quenched Fe–C Twinned Martensite. ISIJ International. 58 [1] (2018) 159-164 10.2355/isijinternational.isijint-2017-270 Open Access
2017
  1. Viera Gärtnerová, Alok Singh, Aleš Jäger, Toshiji Mukai. Deformation behavior of ultra-fine-grained Mg-0.3 at% Al alloy in compression. Journal of Alloys and Compounds. 726 (2017) 651-657 10.1016/j.jallcom.2017.08.032
  2. Hidetoshi Somekawa, Tomohito Tsuru, Alok Singh, Seiji Miura, Christopher A. Schuh. Effect of crystal orientation on incipient plasticity during nanoindentation of magnesium. Acta Materialia. 139 (2017) 21-29 10.1016/j.actamat.2017.07.052
  3. Dudekula Althaf Basha, Ryoji Sahara, Hidetoshi Somekawa, Alok Singh, Koichi Tsuchiya. Effect of processing strain rate and temperature on interfacial segregation of zinc in a magnesium alloy. Materials Science and Engineering: A. 703 (2017) 54-67 10.1016/j.msea.2017.07.041
  4. Alok Singh, Dudekula Althaf Basha, Hidetoshi Somekawa, Koichi Tsuchiya. Nucleation of recrystallized magnesium grains over quasicrystalline phase during severe plastic deformation of a Mg-Zn-Y alloy at room temperature. Scripta Materialia. 134 (2017) 80-84 10.1016/j.scriptamat.2017.02.039
  5. Alok Singh, Hidetoshi Somekawa, Toshiji Mukai. Dislocation structures in a near-isotropic Mg-Y extruded alloy. Materials Science and Engineering: A. 698 (2017) 238-248 10.1016/j.msea.2017.05.071
  6. Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue. Development of Isotropic and Accordion-Like Deformable Magnesium Alloys. MATERIALS TRANSACTIONS. 58 [7] (2017) 1089-1092 10.2320/matertrans.m2017108
  7. Hidetoshi Somekawa, Hiroyuki Watanabe, Dudekula Althaf Basha, Alok Singh, Tadanobu Inoue. Effect of twin boundary segregation on damping properties in magnesium alloy. Scripta Materialia. 129 (2017) 35-38 10.1016/j.scriptamat.2016.10.019
2016
  1. Hidetoshi Somekawa, Alok Singh, Christopher A. Schuh. Effect of twin boundaries on indentation behavior of magnesium alloys. Journal of Alloys and Compounds. 685 (2016) 1016-1023 10.1016/j.jallcom.2016.06.267
  2. Dudekula Althaf Basha, Ryoji Sahara, Hidetoshi Somekawa, Julian M. Rosalie, Alok Singh, Koichi Tsuchiya. Interfacial segregation induced by severe plastic deformation in a Mg–Zn–Y alloy. Scripta Materialia. 124 (2016) 169-173 10.1016/j.scriptamat.2016.07.021
  3. Hidetoshi Somekawa, Alok Singh, Toshiji Mukai, Tadanobu Inoue. Effect of alloying elements on room temperature tensile ductility in magnesium alloys. Philosophical Magazine. 96 [25] (2016) 2671-2685 10.1080/14786435.2016.1212174
  4. Dudekula Althaf Basha, Julian M. Rosalie, Hidetoshi Somekawa, Takashi Miyawaki, Alok Singh, Koichi Tsuchiya. Microstructure study of a severely plastically deformed Mg-Zn-Y alloy by application of low angle annular dark field diffraction contrast imaging. Science and Technology of Advanced Materials. 17 [1] (2016) 115-127 10.1080/14686996.2016.1140304 Open Access
2015
  1. Hidetoshi Somekawa, Masatake Yamaguchi, Yoshiaki Osawa, Alok Singh, Mitsuhiro Itakura, Tomohito Tsuru, Toshiji Mukai. Material design for magnesium alloys with high deformability. Philosophical Magazine. 95 [8] (2015) 869-885 10.1080/14786435.2015.1009518
  2. 染川 英俊, 大澤 嘉昭, シン アロック, 鷲尾 宏太, 加藤 晃, 向井 敏司. Mg-Y二元系合金の変形挙動に及ぼす微量添加の影響. 日本金属学会誌. 79 [2] (2015) 35-40 10.2320/jinstmet.j2014044 Open Access
  3. Debabrata Payra, Masanobu Naito, Yoshihisa Fujii, Norifumi L. Yamada, Sachiko Hiromoto, Alok Singh. Bioinspired adhesive polymer coatings for efficient and versatile corrosion resistance. RSC Advances. 5 [21] (2015) 15977-15984 10.1039/c4ra17196a Open Access
2014
  1. Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue, Kaneaki Tsuzaki. Crack propagation behaviour in magnesium binary alloys. Philosophical Magazine. 94 [29] (2014) 3317-3330 10.1080/14786435.2014.956840
  2. Alok Singh. Tailoring microstructure of Mg–Zn–Y alloys with quasicrystal and related phases for high mechanical strength. Science and Technology of Advanced Materials. 15 [4] (2014) 044803 10.1088/1468-6996/15/4/044803 Open Access
  3. Alok Singh, Yoshiaki Osawa, Hidetoshi Somekawa, Toshiji Mukai. Effect of microstructure on strength and ductility of high strength quasicrystal phase dispersed Mg–Zn–Y alloys. Materials Science and Engineering: A. 611 (2014) 242-251 10.1016/j.msea.2014.05.091
  4. Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue. Enhancement of toughness by grain boundary control in magnesium binary alloys. Materials Science and Engineering: A. 612 (2014) 172-178 10.1016/j.msea.2014.06.001
  5. Alok Singh, Yoshiaki Osawa, Hidetoshi Somekawa, Toshiji Mukai, Catherine J. Parrish, Donald S. Shih. Development of Very High Strength and Ductile Dilute Magnesium Alloys by Dispersion of Quasicrystal Phase. Metallurgical and Materials Transactions A. 45 [8] (2014) 3232-3240 10.1007/s11661-013-2056-5
  6. Fanqiang Meng, Julian M. Rosalie, Alok Singh, Hidetoshi Somekawa, Koichi Tsuchiya. Ultrafine grain formation in Mg–Zn alloy by in situ precipitation during high-pressure torsion. Scripta Materialia. 78-79 (2014) 57-60 10.1016/j.scriptamat.2014.01.036
  7. Alok Singh, Hidetoshi Somekawa, Toshiji Mukai. Formation of nano-twin domains by nucleation and multiplication of twins during fracture of a magnesium alloy. Philosophical Magazine. 94 [9] (2014) 898-913 10.1080/14786435.2013.869052
  8. Masaki Nagao, Tomofumi Terada, Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Deformation Behavior of Binary Mg-Y Alloy Under Dynamic Compression Loading. JOM. 66 [2] (2014) 305-311 10.1007/s11837-013-0854-2
  9. Alok Singh, James E. Saal. Dynamic Properties of Magnesium Alloys. JOM. 66 [2] (2014) 275-276 10.1007/s11837-013-0844-4
  10. Hidetoshi Somekawa, Yoshiaki Osawa, Alok Singh, Kota Washio, Akira Kato, Toshiji Mukai. Effect of Micro-Alloying Elements on Deformation Behavior in Mg–Y Binary Alloys. MATERIALS TRANSACTIONS. 55 [1] (2014) 182-187 10.2320/matertrans.m2013303
2013
  1. Chamini l. Mendis, Alok Singh. Magnesium Recycling: To the Grave and Beyond. JOM. 65 [10] (2013) 1283-1284 10.1007/s11837-013-0701-5
  2. Julian M. Rosalie, Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Effect of precipitation on strength and ductility in a Mg–Zn–Y alloy. Journal of Alloys and Compounds. 550 (2013) 114-123 10.1016/j.jallcom.2012.09.027
2012
  1. Alok Singh, H. Somekawa, Y. Matsushita, A.P. Tsai. Solidification of tin on quasicrystalline surfaces. Philosophical Magazine. 92 [9] (2012) 1106-1128 10.1080/14786435.2011.640646
  2. Julian M. Rosalie, Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. The effect of size and distribution of rod-shaped precipitates on the strength and ductility of a Mg–Zn alloy. Materials Science and Engineering: A. 539 (2012) 230-237 10.1016/j.msea.2012.01.087
2011
  1. Alok Singh, H. Somekawa, T. Mukai. High temperature processing of Mg–Zn–Y alloys containing quasicrystal phase for high strength. Materials Science and Engineering: A. 528 [21] (2011) 6647-6651 10.1016/j.msea.2011.05.001
  2. Hidetoshi Somekawa, Tadanobu Inoue, Alok Singh, Toshiji Mukai. Deformation Mechanism in the Crack-Tip Region of Fine-Grained Magnesium Alloy. Metallurgical and Materials Transactions A. 42 [8] (2011) 2475-2480 10.1007/s11661-011-0642-y
  3. Julian M. Rosalie, Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Orientation relationships between icosahedral clusters in hexagonal MgZn2 and monoclinic Mg4Zn7 phases in Mg-Zn(-Y) alloys. Philosophical Magazine. 91 [19-21] (2011) 2634-2644 10.1080/14786435.2010.541168
  4. Hidetoshi Somekawa, Yoshiaki Osawa, Alok Singh, Toshiji Mukai. Effect of Quasicrystal Phase Particle Dispersion on Mechanical Properties in Mg-Zn-Al Alloys. MATERIALS TRANSACTIONS. 52 [6] (2011) 1111-1115 10.2320/matertrans.mc201014
  5. Alok Singh, Yoshiaki Osawa, H. Somekawa, T. Mukai. Ultra-fine grain size and isotropic very high strength by direct extrusion of chill-cast Mg–Zn–Y alloys containing quasicrystal phase. Scripta Materialia. 64 [7] (2011) 661-664 10.1016/j.scriptamat.2010.12.016
  6. Alok Singh, J.M. Rosalie, H. Somekawa, T. Mukai. Crystallographic relationship of orthorhombic φ-Al5Mg11Zn4 phase to icosahedral quasicrystalline phase. Journal of Alloys and Compounds. 509 [14] (2011) 4676-4681 10.1016/j.jallcom.2011.01.153
2010
  1. Hidetoshi Somekawa, Kiyomi Nakajima, Alok Singh, Toshiji Mukai. Ductile fracture mechanism in fine-grained magnesium alloy. Philosophical Magazine Letters. 90 [11] (2010) 831-839 10.1080/09500839.2010.508444
  2. Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue, Toshiji Mukai. Enhancing Fracture Toughness of Magnesium Alloy by Formation of Low-Angle Grain Boundary Structure. Advanced Engineering Materials. 12 [9] (2010) 837-842 10.1002/adem.201000050
  3. Alok Singh, Julian M. Rosalie, Hidetoshi Somekawa, Toshiji Mukai. The structure of precipitates in Mg–Zn–Y alloys. Philosophical Magazine Letters. 90 [9] (2010) 641-651 10.1080/09500839.2010.490049
  4. Julian M. Rosalie, Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Structural relationships among MgZn2and Mg4Zn7phases and transition structures in Mg-Zn-Y alloys. Philosophical Magazine. 90 [24] (2010) 3355-3374 10.1080/14786435.2010.484659
  5. Alok Singh, A.P. Tsai. Interfaces between lead and amorphous matrices in immiscible systems. High Temperature Materials and Processes. 29 [5-6] (2010) 10.1515/htmp.2010.29.5-6.523
  6. Toshiji Mukai, Hidetoshi Somekawa, Tadanobu Inoue, Alok Singh. Strengthening Mg–Al–Zn alloy by repetitive oblique shear strain with caliber roll. Scripta Materialia. 62 [2] (2010) 113-116 10.1016/j.scriptamat.2009.09.005
2009
  1. Hidetoshi Somekawa, Yoshiaki Osawa, Alok Singh, Toshiji Mukai. Rare-earth free wrought-processed magnesium alloy with dispersion of quasicrystal phase. Scripta Materialia. 61 [7] (2009) 705-708 10.1016/j.scriptamat.2009.06.008
  2. Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Superplastic Behavior in MgZnY Alloy with Dispersed Quasicrystal Phase Particles. Advanced Engineering Materials. 11 [10] (2009) 782-787 10.1002/adem.200900110
  3. H SOMEKAWA, A SINGH, T MUKAI. Microstructure evolution of Mg–Zn binary alloy during a direct extrusion process. Scripta Materialia. 60 [6] (2009) 411-414 10.1016/j.scriptamat.2008.11.017
  4. H. Somekawa, A. Singh, T. Mukai. Fracture mechanism of a coarse-grained magnesium alloy during the fracture toughness testing. Philosophical Magazine Letters. 89 [1] (2009) 2-10 10.1080/09500830802537718
2008
  1. Alok Singh, H. Somekawa, A.P. Tsai. Interfaces made by tin with icosahedral phase matrix. Scripta Materialia. 59 [7] (2008) 699-702 10.1016/j.scriptamat.2008.05.040
  2. Hidetoshi Somekawa, Alok Singh, Yoshiaki Osawa, Toshiji Mukai. High Strength and Fracture Toughness Balances in Extruded Mg-Zn-RE Alloys by Dispersion of Quasicrystalline Phase Particles. MATERIALS TRANSACTIONS. 49 [9] (2008) 1947-1952 10.2320/matertrans.maw200804
  3. 染川 英俊, シン アロク, 向井 敏司. 準結晶粒子分散による高強度・高靭性マグネシウム合金. 金属. 78 [4] (2008) 359-362
  4. Hidetoshi Somekawa, Yoshiaki Osawa, Alok Singh, Toshiji Mukai. Effect of precipitate volume fraction in fracture toughness of extruded Mg-Zn alloys. Journal of Materials Research. 23 [04] (2008) 1128-1135 10.1557/jmr.2008.0132
2007
  1. Alok Singh, A.P. Tsai. Structural characteristics of β1′ precipitates in Mg–Zn-based alloys. Scripta Materialia. 57 [10] (2007) 941-944 10.1016/j.scriptamat.2007.07.028
  2. Hidetoshi Somekawa, Han S. Kim, Alok Singh, Toshiji Mukai. Fracture toughness in direct extruded Mg-Al-Zn alloys. Journal of Materials Research. 22 [09] (2007) 2598-2607 10.1557/jmr.2007.0334
  3. A SINGH, H SOMEKAWA, T MUKAI. Compressive strength and yield asymmetry in extruded Mg–Zn–Ho alloys containing quasicrystal phase. Scripta Materialia. 56 [11] (2007) 935-938 10.1016/j.scriptamat.2007.02.015
  4. Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. High fracture toughness of extruded Mg–Zn–Y alloy by the synergistic effect of grain refinement and dispersion of quasicrystalline phase. Scripta Materialia. 56 [12] (2007) 1091-1094 10.1016/j.scriptamat.2007.02.024
  5. Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Synergetic Effect of Grain Refinement and Spherical Shaped Precipitate Dispersions in Fracture Toughness of a Mg-Zn-Zr Alloy. MATERIALS TRANSACTIONS. 48 [6] (2007) 1422-1426 10.2320/matertrans.mra2006355
  6. Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Effect of precipitate shapes on fracture toughness in extruded Mg-Zn-Zr magnesium alloys. Journal of Materials Research. 22 [04] (2007) 965-973 10.1557/jmr.2007.0112
  7. A. Singh, A. P. Tsai. Interfaces of bismuth with Al-Cu-Fe icosahedral quasicrystal. Philosophical Magazine Letters. 87 [2] (2007) 85-94 10.1080/09500830601121094
  8. S. Ranganathan, E.A. Lord, N.K. Mukhopadhyay, SINGH, Alok. A symmetrical indexing scheme for decagonal quasicrystals analogous to Miller–Bravais indexing of hexagonal crystals. ACTA CRYSTALLOGRAPHICA SECTION A. A63 (2007) 1-10
2006
  1. Hidetoshi Somekawa, Alok Singh, Toshiji Mukai. Deformation structure after fracture toughness test in Mg-Al-Zn alloys processed by equal-channel-angular extrusion. Philosophical Magazine Letters. 86 [3] (2006) 195-204 10.1080/09500830600627265
  2. A. Singh, M. Watanabe, A. Kato, A. P. Tsai. Strengthening effects of icosahedral phase in magnesium alloys. Philosophical Magazine. 86 [6-8] (2006) 951-956 10.1080/14786430500253901
2005
  1. Alok Singh, A.P. Tsai. A new orientation relationship OR4 of icosahedral phase with magnesium matrix in Mg–Zn–Y alloys. Scripta Materialia. 53 [9] (2005) 1083-1087 10.1016/j.scriptamat.2005.06.041
  2. A SINGH, M WATANABE, A KATO, A TSAI. Twinning and the Orientation Relationships of Icosahedral Phase with the Magnesium Matrix. Acta Materialia. 53 [17] (2005) 4733-4742 10.1016/j.actamat.2005.06.026
  3. Alok Singh, M. Watanabe, A. Kato, A.P. Tsai. Crystallographic orientations and interfaces of icosahedral quasicrystalline phase growing on cubic W phase in Mg-Zn-Y alloys. Materials Science and Engineering: A. 397 [1-2] (2005) 22-34 10.1016/j.msea.2005.02.036
  4. Alok Singh, M. Watanabe, A. Kato, A.P. Tsai. Strengthening in Magnesium Alloys by Icosahedral Phase. Science and Technology of Advanced Materials. 6 [8] (2005) 895-901 10.1016/j.stam.2005.08.005
2004
  1. A SINGH, M WATANABE, A KATO, A TSAI. Microstructure and strength of quasicrystal containing extruded Mg-Zn-Y alloys for elevated temperature application. Materials Science and Engineering A. 385 [1-2] (2004) 382-396 10.1016/s0921-5093(04)00903-7
  2. A SINGH, M WATANABE, A KATO, A TSAI. Formation of icosahedral?hexagonal H phase nano-composites in Mg?Zn?Y alloys. Scripta Materialia. 51 [10] (2004) 955-960 10.1016/j.scriptamat.2004.07.019

書籍 TSV

会議録 TSV

2017
  1. SINGH, Alok, DUDEKULA, Althaf Basha, SOMEKAWA, Hidetoshi, ROSALIE, Julian Mark, TSUCHIYA, Koichi. Study of severely plastically deformed alloys by application of scanning transmission electron microscopy techniques. EMSI 2017 Proceedings, International Conference on Electron Microscopy and allied Techniques. (2017) 68-70
2016
  1. SINGH, Alok, DUDEKULA, Althaf Basha, Naoko Ikeo, SOMEKAWA, Hidetoshi, Toshiji MUKAI. Lattice ordering and microstructure of ultra-high strength Mg-Ca-Zn alloys. Proceedings of Magnesium Technology 2016. (2016) 83-88
2015
  1. SINGH, Alok, OHSAWA, Yoshiaki, SOMEKAWA, Hidetoshi, Toshiji Mukai, Catherine J. Parrish, Donald S. Shih. Effect 􀀁of alloy composition􀀁on on microstructure 􀀁and strength􀀁 of a fine􀀁 grained. Magnesium Technology 2015. (2015) 215-220
  2. SOMEKAWA, Hidetoshi, OHSAWA, Yoshiaki, SINGH, Alok, A. Kinoshita, K. Washio, A. Kato, T. Mukai. Effect of micro-alloying elements on mechanical properties in dilute magnesium alloys. Proceedings of the Mg 2015. (2015) 25-30
2014
  1. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok. Precipitation strengthening of a Mg-Zn alloy in tension and compression. Magnesium Technology 2014. (2014) 105-110
2013
  1. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Increasing volume fraction of precipitates and strength of a Mg-Zn-Y alloy by pre-ageing deformation. Magnesium Technology 2013. (2013) 9999-1-9999-6
  2. SINGH, Alok, SOMEKAWA, Hidetoshi, INOUE, Tadanobu, MUKAI, Toshiji. Evolution of microstructure during caliber rolling of AZ31 alloy. Magnesium Technology 2013. (2013) 317-322
2012
  1. SINGH, Alok, SOMEKAWA, Hidetoshi, MUKAI, Toshiji. FORMATION OF NANO-SCALE TWINS AND LOW ANGLE GRAIN BOUNDARIES DURING FRACTURE OF A FINE GRAINED MAGNESIUM ALLOYS. Magnesium Technology 2012. (2012) 93-97
  2. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Evaluating the effect of pre-ageing deformation on β' precipitate size and distribution in Mg-Zn(-Y) Alloys. Magnesium Technology 2012. (2012) 191-196
  3. SOMEKAWA, Hidetoshi, SINGH, Alok, INOUE, Tadanobu, Toshiji Mukai. Development of High Strength and Toughness Magnesium Alloy by Grain Boundary Control. MAGNESIUM TECHNOLOGY 2012. (2012) 345-347
2011
  1. SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Fracture mechanism and toughness in fine- and coarse-grained magnesium alloys. Magnesium Technology 2011. (2011) 25-28
  2. SINGH, Alok, OHSAWA, Yoshiaki, SOMEKAWA, Hidetoshi, MUKAI, Toshiji. Improved Processing of Mg-Zn-Y alloys containing quasicrystal phase for isotropic high strength and ductility. Magnesium Technology 2011. (2011) 239-244
  3. MUKAI, Toshiji, SOMEKAWA, Hidetoshi, SINGH, Alok, INOUE, Tadanobu. Strengthening Mg-Al-Zn alloy by repetitive oblique shear strain. TMS 2011 140th Annual Meeting and Exhibition, Supplemental Proceedings. (2011) 211-214
2010
  1. SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Superplastic behavior in magnesium alloy dispersed quasicrystal phase particle. KEY ENGINEERING MATERIALS. (2010) 291-295
  2. MUKAI, Toshiji, OHSAWA, Yoshiaki, SINGH, Alok, INOUE, Tadanobu. Strengthening Al-Mg-Si Alloys with Ultra Fine Sub-grain Structure. Proceedings of the 12th International Conference on Aluminium Alloys. (2010) 1190-1194
  3. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Structural relationships between monoclinic and Laves phase precipitates in Mg-Zn-Y alloys. . MAGNESIUM TECHNOLOGY 2010. (2010) 347-351
2009
  1. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. 8th International Conference on Magnesium alloys and their applications. Magnesium. (2009) 288-294
  2. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Directionally controlled precipitation on twin-boundaries in Mg-Zn-Y alloys. Magnesium Technology 2009. (2009) 445-450
  3. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. On controlled pre-ageing deformation of a Mg-Zn-Y alloy. Processing and fabrication of advanced materials 18. (2009) 379-388
2008
  1. SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Fracture Toughness in Magnesium Alloys by Dispersion of Quasicrystalline Phase. MAGNESIUM TECHNOLOGY 2008. (2008) 317-320
  2. SINGH, Alok. Phase Relations, Formation and Morphologies in Mg-Zn-RE (RE=Y, rare earth) alloys. Magnesium Technology 2008. (2008) 337-342
2007
  1. SINGH, Alok, Junqing Guo, TSAI, Anpang. Stability and diffraction features of quasicrystal and 2/1 approximant phase in an Au42In42Yb16 alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. (2007) 991-994
  2. SINGH, Alok, SOMEKAWA, Hidetoshi, MUKAI, Toshiji. Strengthening contributions of quasicrystalline icosahedral phase to tensile and compressive strength in Mg-Zn-RE alloys. Proc. 16th Int. Conf. on Processing and Fabrication of Advanced Materials XVI. (2007) 492-503
2006
  1. SINGH, Alok, SOMEKAWA, Hidetoshi, MUKAI, Toshiji. Microstructure and strength of Mg-Zn-Ho alloys containing quasicrystal phase. International Symposium on Magnesium Technology in the Global Age . (2006) 453-463
  2. SINGH, Alok, SOMEKAWA, Hidetoshi, MUKAI, Toshiji, TSAI, Anpang. Deformation structures and yield asymmetry in extruded Mg-Zn-Y alloys containing quasicrystal phase. International Symposium on Magnesium Technology in the Global Age . (2006) 441-451
  3. SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. Fracture toughness in magnesium alloys produced by severe plastic deformation. International Symposium on Magnesium Technology. (2006) 603-610
2005
  1. SINGH, Alok, Masaki Watanabe, Akira Kato, TSAI, Anpang. Effect of Heat-Treatment on Microstructure and Strength of Quasicrystal Containing Extruded Mg-Zn-Y Alloys. Magnesium Technology 2005. (2005) 105-110

口頭発表 TSV

2023
  1. DARAM, Phuangphaga, SINGH, Alok, WATANABE, Makoto. Compositionally Graded Titanium to Aluminum processed by Laser Powder Bed Fusion Process: Microstructure Evolution and Mechanical Properties. 2023 Fall Meeting of JIMM. 2023
  2. ジョディ デニス エドガード, 北嶋 具教, シン アロク, 渡邊 誠. フラットトップレーザ粉末床溶融結合法により造形した Ni 単結晶の高温におけるミクロ組織安定性. 日本金属学会2023年春期講演大会. 2023
2022
  1. 瓜生 寛堂, 山田 庸公, 北原 功一, シン アロク, 岩﨑 祐昂, 木村 薫, 宮尾 直哉, 石川 明日香, 田村 隆治, Chang Liu, 吉田 亮. 多相粉末X線回折図から準結晶相を同定する機械学習モデル. 新学術領域研究「ハイパーマテリアル」第9回領域会議. 2022
  2. JODI, Dennis Edgard, KITASHIMA, Tomonori, SINGH, Alok, WATANABE, Makoto. Suppressed Dislocation Density in Single-Crystal Pure Ni Fabricated via Laser Powder Bed Fusion with a Flat-Top Laser Profile. 13th Annual ISAJ Symposium: Frontiers of Materials, Life & Earth Sciences and Beyond. 2022
  3. HARA, Toru, SINGH, Alok. Electron microscopy techniques developed in NIMS for materials research. 13th the Indian Scientists Association in Japan (ISAJ) Symposium. 2022 招待講演
  4. 小川 由希子, 土井 康太郎, シン アロク, 染川 英俊, 廣本 祥子. 熱酸化によりMg-Sc合金上に形成した酸化膜の組織とその機能性. 日本金属学会 2022年秋期(第171回)講演大会. 2022
2021
  1. SINGH Alok, HIROTO Takanobu, ODE Machiko, Hiroyuki Takakura, Karel Tesar, SOMEKAWA Hidetoshi, HARA Toru. Precipitation of stable quasicrystal phase in a Mg-Zn-Al alloy. Third Indian Materials Conclave (IndMac) and 32nd Annual General Meeting of MRSI. 2021 招待講演
  2. SINGH Alok, TAKAKURA Hiroyuki, HIROTO Takanobu, ODE Machiko, SOMEKAWA Hidetoshi, HARA Toru. Nucleation behavior and lattice match of stable icosahedral phase in a Mg Zn Al alloy. Material Research Meeting 2021 (MRM2021) . 2021
  3. SINGH Alok. Design of Microstructures in Metallic Materials for High Performance and Reliability. India - Japan Symposium on Science & Technology Innovation (STI)Towards A Sustainable World. 2021
  4. SINGH Alok, HIROTO Takanobu, ODE Machiko, TESAR Karel, SOMEKAWA Hidetoshi, HARA Toru. Precipitation of Stable Icosahedral Quasicrystalline Phase in Mg-Al-Zn alloys. MS&T21: Materials Science & Technology https://www.matscitech.org/MST21/. 2021 招待講演
  5. 染川 英俊, シン アロク, ドゥデクラ アルタフ バシャ. 粒界構造と添加元素制御によるマグネシウム合金の高延性化. 日本機械学会 2021年度 年次大会. 2021
  6. SINGH Alok. Exotic Structures and Microstructures in Metallic Materials, and their Applications. Indo-Japan Sakura Science Cafe: Sunrise in Clouds. 2021 招待講演
  7. SINGH Alok, HIROTO Takanobu, ODE Machiko, TESAR Karel, SOMEKAWA Hidetoshi, HARA Toru. Precipitation of icosahedral phase in Mg-Al-Zn alloys. 第25回準結晶研究会＋第2回ハイパーマテリアル若手研究会. 2021
2020
  1. 染川 英俊, ドゥデクラ アルタフ バシャ, シン アロク. 力学特性および変形機構に及ぼす粒界偏析の影響. 日本金属学会春期大会. 2020
  2. TESAR Karel, SOMEKAWA Hidetoshi, SINGH Alok. Microstructure development by extrusion of quasicrystal containing ZW82 and ZA63 alloys. 2020年春期講演大会. 2020
  3. Toru Murata, Nobuhiro Imakura, SINGH, Alok, GUTIERREZ URRUTIA, Ivan, TSUCHIYA, Koichi, Naoko Ikeo, Toshiji Mukai. Microstructure Evolution and Enhanced Strength in CoCrFeMnNi Alloy through High Speed Shear Loading. TMS 2020. 2020
2019
  1. 世良田遼平, SINGH, Alok, GUTIERREZ URRUTIA, Ivan, TSUCHIYA, Koichi, 向井敏司. Microstructure evolution in CoCrFeMnNi high-entropy alloy by localized shear deformation. 1st World Congress on High Entropy Alloys (HEA 2019). 2019
  2. SINGH, Alok, DUDEKULA, Althaf Basha, MATSUSHITA, Yoshitaka, TSUCHIYA, Koichi, LU Zhaoping, Nieh Tai-Gang, MUKAI Toshiji. Microstructure of a caliber rolled high entropy CoCrFeMnNi alloy – domain structures. 2019秋期講演大会. 2019
  3. 染川 英俊, ドゥデクラ アルタフ バシャ, シン アロク, 渡辺博行, 都留智仁. 双晶界面の局所変形応答に及ぼす溶質元素の影響. 2019年秋期講演大会. 2019
  4. MANOHARAN Kamalnath, DUDEKULA, Althaf Basha, DOI, Kotaro, SINGH, Alok, B. Mohan, TSUCHIYA, Koichi. Development of wear-resistant coating of quasicrystal on aluminium alloys by high-pressure torsion at room temperature. 14th International Conference on Quasicrystals (ICQ14). 2019
  5. SINGH, Alok, DUDEKULA, Althaf Basha, PARASURAMAN Seenuvasaperumal, MATSUSHITA, Yoshitaka, SOMEKAWA, Hidetoshi, TSUCHIYA, Koichi. Ultra-hard magnesium alloy containing quasicrystal phase processed by high pressure torsion. 日本金属学会2019年春期講演大会. 2019
  6. DUDEKULA, Althaf Basha, SOMEKAWA, Hidetoshi, SINGH, Alok. In-situ observations of crack propagation behavior in Mg-Mn alloy. JIM (The Japan Institute of Metals and Materials)-spring(164th) meeting-2019. 2019
2018
  1. SINGH, Alok, ROSALIE, Julian Mark. Structural relationship of monoclinic Mg4Zn7 phase and its growth defect structures to icosahedral phase in Mg-Zn-Y alloys. 第23 回準結晶研究会. 2018
  2. DUDEKULA, Althaf Basha, SOMEKAWA, Hidetoshi, SINGH, Alok. In-situ straining studies of crack propagation behavior in pure Mg and Mg-0.3 at.%Y alloy in transmission electron microscope. 9th Annual symposium of Indian Scientists Association in JAPAN(2018 ISAJ). 2018
  3. ドゥデクラ アルタフ バシャ, 染川 英俊, シン アロク. Crack propagation behavior during in-situ deformation of pure-Mg and Mg-Y alloy in TEM. 日本金属学会2018年秋期講演大会. 2018
  4. ドゥデクラ アルタフ バシャ, 染川 英俊, シン アロク. Role of grain boundary structure and twinning in crack propagation behaviour in magnesium alloys. 11th International Conference on Magnesium Alloys and Their Appl. 2018
  5. 佐原 亮二, ドゥデクラ アルタフ バシャ, 染川 英俊, シン アロク, 土谷 浩一. Theoretical investigation of the interfacial segregation induced by severe plastic deformation in a Mg-Zn-Y alloy. NANO KOREA 2018 Symposium. 2018
  6. シン アロク. Nucleation of magnesium crystals over icosahedral phase during severe plastic deformation of Mg-Zn-Y alloy. 第22 回準結晶研究会. 2018
2017
  1. シン アロク. Control of recrystallization, texture and yield asymmetry through composition and processing in Mg-Zn-Y alloys. International Conference on Advanced Materials and Processes. 2017 招待講演
  2. ドゥデクラ アルタフ バシャ, 佐原 亮二, 染川 英俊, シン アロク, 土谷 浩一. Deformation induced interfacial segregation of zinc in Mg-Zn-Y alloy. 8th ISAJ Symposium on Bridging Nature and Technology. 2017
  3. シン アロク, ドゥデクラ アルタフ バシャ, 佐原 亮二, 染川 英俊, ロザリエ ジュリアン マーク, 土谷 浩一. Microstructure evolution in a Mg-Zn-Y alloy studied by annular dark field electron microscopy after deformation under high pressure torsion. Euromat 2017 (European congress and exhibition on advanced mater. 2017 招待講演
  4. 染川 英俊, シン アロク, 井上 忠信. 蛇腹変形可能なマグネシウム合金. 日本金属学会2017年秋期大会. 2017
  5. 平徳海, AlokSingh, 阿部太一, 小野寺秀博, 郭樹啓, 大村孝仁, 大沼　正人. The observation of ω-Fe from <112> zone axes of twinned martensite. 日本鉄鋼協会第174回秋季講演大会. 2017
  6. SINGH, Alok, DUDEKULA, Althaf Basha, SOMEKAWA, Hidetoshi, ROSALIE, Julian Mark, TSUCHIYA, Koichi. Study of severely plastically deformed alloys by application of scanning transmission electron microscopy techniques. International conference and Annual Meeting of EMSI. 2017
  7. 向井 敏司, 二ノ宮由樹, グティエレス ウルティア イヴァン, 池尾直子, シン アロク, 大澤 嘉昭, 土谷 浩一. Deformation behavior of severe plastically rolled Al-Mg alloy under dynamic loading. NanoSPD 2017. 2017
  8. ドゥデクラ アルタフ バシャ, 佐原 亮二, 染川 英俊, NA, シン アロク, 土谷 浩一. Zinc segregation on interfaces induced by severe plastic deformation of a Mg-Zn-Y alloy at room temperature. TMS 2017: 146th Annual Meeting and Exhibition. 2017
2016
  1. パラスラマナ シヌワサペルマル, 土井 康太郎, ドゥデクラ アルタフ バシャ, シン アロク, NA, 土谷 浩一. Effect of High Pressure Torsion on Mechanical and Tribological behavior of Calcium hexaboride reinforced AZ31 Magnesium Composites. India-Japan Symposium on Science & Technology for Sustainability. 2016
  2. 南　久遠, 二宮友樹, 大澤 嘉昭, 土谷 浩一, シン アロク, 池尾直子, 向井&#64065;司. 高速圧縮変形によるAl-Mg合金の結晶組織制御. 日本機械学会 M&M2016材料力学カンファレンス. 2016
  3. シン アロク, ドゥデクラ アルタフ バシャ, 染川 英俊, 土谷 浩一. Deformation of icosahedral quasicrystal in a composite of Mg-Zn-Y alloy during severe plastic deformation. 13th International Conference on Quasicrystals ICQ13. 2016
  4. 土谷 浩一, 孟 凡強, ロザリエ ジュリアン マーク, ドゥデクラ アルタフ バシャ, 染川 英俊, シン アロク. Effect of HPT-deformation on microstructures and precipitation behavior in Mg-Zn alloy. PRICM-9. 2016
  5. シン アロク, 染川 英俊, 大橋 諭, 蔡 安邦, 加藤　晃. Microstructure of extruded Mg-Cd-Yb alloys. 9th Pacific Rim International Conference on Advanced Materials P. 2016
  6. 染川 英俊, シン アロク, 井上 忠信. Effect of alloying element on fracture toughness in magnesium binary alloys. PRICM9. 2016
  7. シン アロク. Effect of quasicrystalline phase on the microstructure and mechanical properties of magnesium alloys. International Conference on Metals and Materials Research (ICMR . 2016 招待講演
  8. SINGH, Alok. Lattice ordering and microstructure of ultra-high strength Mg-Ca-Zn alloys. TMS 2016 145th Annual Meeting and Exhibition. 2016
  9. 阿部　英司, シン アロク. Mg alloys strengthened by complex phases. TMS 2016 145th Annual Meeting and Exhibition. 2016 招待講演
2015
  1. ドゥデクラ アルタフ バシャ, Julian M Rosalie, 染川 英俊, Takashi Miyawaki, シン アロク, 土谷 浩一. Application of STEM low angle annular dark field diffraction contrast to imaging of severely deformed alloys. The 2nd East-Asia Microscopy Conference. 2015
  2. シン アロク, 染川 英俊, 向井 敏司. Dislocation structures on deformation of a Mg-2.2at%Y extruded alloy. The 10th international conference on magnesium alloys and their. 2015 招待講演
  3. 今倉信浩, 池尾直子, シン アロク, 大澤 嘉昭, 土谷 浩一, T. G. Nieh, 向井&#64065;司. 強ひずみ圧延加工による CoCrFeMnNi 系 HEA の高強度化. 日本金属学会秋期講演大会. 2015
  4. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司. Effect of grain size, texture and precipitation on ductility of magnesium alloys. International Conference in Frontiers in Materials Processing, A. 2015 招待講演
  5. 土谷 浩一, 姜 保真, 江村 聡, ロザリエ ジュリアン マーク, 孟 凡強, パウ ブライアン リチャード, 染川 英俊, シン アロク. Ultrafine-Structured Light Alloys Produced by Severe Plastic Deformation. FiMPART. 2015 招待講演
  6. SINGH, Alok. Effect &#1048577;of alloy composition&#1048577;on on microstructure &#1048577;and strength&#1048577; of a fine&#1048577; grained. TMS 2015 Annual Meeting and Exhibition. 2015
2014
  1. 宮脇 崇, 土谷 浩一, 井 誠一郎, シン アロク. HPT 加工を施した Al-Zn-Mg-(Cu)合金の時効挙動に Cu 原子が及ぼす影響. 2014年秋期(第155回)講演大会. 2014
  2. シン アロク, 染川 英俊, 向井 敏司. Slip-boundary interactions and nucleation of twins in a Mg-Zn alloy. 18th International Microscopy Congress IMC2014. 2014
  3. シン アロク. Tailoring the microstructure of magnesium alloys for ultra-high strength and ductility. International Conference on Energy Materials (ICEM-2014). 2014 招待講演
  4. 土谷 浩一, 井 誠一郎, シン アロク, 宮脇 崇. HPT 加工を施した Al-Zn-Mg(-Cu)合金の機械的特性. 一般社団法人　軽金属学会. 2014
  5. 土谷 浩一, 孟 凡強, ロザリエ ジュリアン マーク, シン アロク, 染川 英俊. Ultrafine grain formation by in situ precipitation during SPD in Mg alloy. Northwestern Univ - NIMS Materials Genome Workshop. 2014
  6. 染川 英俊, 大澤 嘉昭, シン アロク, 木下昭人, 鷲尾宏太, 加藤晃, 向井敏司. マグネシウム合金の塑性変形応答に及ぼす溶質元素の影響. 日本金属学会2014年春期大会. 2014
  7. シン アロク, 澤口 孝宏, 津﨑 兼彰. Plate-plate and twinning interactions in deformation induced epsilon-martensite. 日本金属学会2014年春期(第154回)講演大会講演. 2014
  8. 染川 英俊, 大澤 嘉昭, シン アロク, 木下昭人, 鷲尾宏太, 加藤晃, 向井敏司. 希薄Mg-Y合金の塑性変形応答. 関西支部第89期定時総会講演会. 2014
  9. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司, Catherine J. Parrish, Donald S. Shih. Development of ultra-high strength and ductility magnesium alloys with small addition of Zn and Y elements. TMS2014 - 143rd Annual Meeting & Exhibition. 2014
  10. 孟 凡強, ロザリエ ジュリアン マーク, シン アロク, 染川 英俊, 土谷 浩一. Grain refinement and mechanical properties of Mg-3.4at%Zn alloy strained by high-pressure torsion. The Minerals Metals and Materials (TMS) Society Annual Meeting. 2014
2013
  1. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司. Effect of microstructure on strength and ductility of high strength extruded Mg-Zn-Y alloys. IUMRS International Conference in Asia - 2013 (IUMRS-ICA 2013). 2013 招待講演
  2. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司, Catherine J. Parrish, Donald S. Shih. Effect of composition and processing parameters on strength and ductility of Mg-alloys with a dispersion of quasicrystal phase. International Conference on Processing and Manuf. of Adv. Mater.. 2013 招待講演
  3. 染川 英俊, シン アロク, 井上 忠信, 向井敏司. Effect of grain size on fracture mechanism in magnesium alloys. 2013 MRS Fall meeting. 2013
  4. シン アロク. From quasicrystals to ultra-strong lightweight alloys. Annual Technical Meeting of Indian Institute of Metals (NMD-ATM). 2013 招待講演
  5. パイラ デバブラタ, 内藤 昌信, シン アロク. SYNTHESIS AND STUDIES OF NOVEL MULTI-FUNCTIONAL POLYMER COATINGS FOR METALS AND ALLOYS. ISAJ India-Japan symposium. 2013 招待講演
  6. 染川 英俊, 大澤 嘉昭, シン アロク, 向井敏司. Superplasticity of quasicrystalline magnesium alloys. The 5th Asian Symposium on Magnesium Alloys. 2013 招待講演
  7. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司, Catherine J. Parrish, Donald S. Shih. Effect of alloy composition and grain size on development of ultra-high strength and ductile Mg-Zn-Y alloys. 日本金属学会 2013年度秋期大会. 2013
  8. 田淵正幸, 澤口 孝宏, シン アロク, 土谷 浩一. HPT加工したＦｅ-30Ｍｎ-（６-ｘ）Ｓｉ-ｘＡｌ　ＴＲＩＰ/ＴＷＩＰ. 2013日本金属学会秋期大会. 2013
  9. ロザリエ ジュリアン マーク, 染川 英俊, シン アロク. The effect of precipitation strengthening on slip and twinning in Mg-Zn. Japan Institute of Metals 2013 Fall Meeting . 2013
  10. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司, Catherine J. Parrish, Donald S. Shih. Development of very high strength and ductile Mg-alloys by dispersion of quasicrystal phase. Magnesium Workshop Madrid 2013 An International Workshop on Proc. 2013 招待講演
  11. 染川 英俊, 大澤 嘉昭, シン アロク, 木下昭人, 鷲尾宏太, 加藤晃, 向井敏司. Yを微量添加したマグネシウム合金の塑性変形応答. 日本金属学会2013年春期大会. 2013
  12. SINGH, Alok. Evolution of microstructure during caliber rolling of AZ31 alloy. TMS 2013 142nd ANNUAL MEETING & EXHIBITION . 2013
2012
  1. シン アロク, 松下 能孝, 染川 英俊, 蔡 安邦. Lattice parameters of bismuth particles embedded in Al-Cu-Fe quasicrystalline phase. 準結晶研究会. 2012
  2. シン アロク, 澤口 孝宏, 小川 一行, 張 昕, 津﨑 兼彰. &quot;Plate-plate interactions in deformation induced epsilon-martensite and gamma deformation twinning in TRIP/TWIP steels. International Workshop on High Performance Steels. 2012 招待講演
  3. ロザリエ ジュリアン マーク, 染川 英俊, シン アロク, 向井 敏司. Precipitation strengthening of a Mg-Zn-Y alloy. Frontiers in Sci. & Tech.: Successes & Emerging Challenges. 2012
  4. シン アロク. Very High Strength and Ductile Mg-alloys by use of Quasicrystalline Phase for Strengthening. India-Japan Symposium on Frontiers in Science and Technology. 2012 招待講演
  5. シン アロク, ロザリエ ジュリアン マーク. Mg4Zn7 Phase as an Approximant Crystal. 7th International Conference on Aperiodic Crystals. 2012
  6. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司. Achieving very high isotropic strength with ductility by simple processing of Mg-Zn-Y alloys containing quasicrystal phase. IUMRS-ICA. 2012
  7. シン アロク, 染川 英俊, 向井 敏司. A High-Resolution Electron Microscopy Study of Twinning in a Magnesium Alloy under Fracture Strain. The XXXIII ANNUAL MEET OF ELECTRON MICROSCOPE SOCIETY OF INDIA. 2012 招待講演
  8. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司. Isotropic ultra-high strengths combined with ductility obtained by simple processing of Mg-Zn-Y alloys containing quasicrystal phase. NIMS Conference 2012. 2012
  9. シン アロク, 染川 英俊, 向井 敏司. Formation of nano-scale twins and double twins during fracture of fine grained magnesium alloys. NIMS Conference 2012. 2012 招待講演
  10. ロザリエ ジュリアン マーク, 染川 英俊, シン アロク, 向井 敏司. The effect of size and distribution of rod-shaped β1' precipitates on the strength and ductility of Mg-Zn(-Y) alloys . NIMS Conference 2012. 2012
  11. 染川 英俊, シン アロク, 井上 忠信, 向井敏司. き裂先端部の変形メカニズムに及ぼす結晶粒径の影響. 第61期学術講演会. 2012
  12. ロザリエ ジュリアン マーク, シン アロク. The monoclinic Mg4Zn7 phase as an approximant of the icosahedral quasicrystal. Quasicrystal international conference. 2012
  13. SINGH, Alok. FORMATION OF NANO-SCALE TWINS AND LOW ANGLE GRAIN BOUNDARIES DURING FRACTURE OF A FINE GRAINED MAGNESIUM ALLOYS. 2012 TMS Annual Meeting & Exhibition. 2012
  14. シン アロク. Quasicrystals: Indian Contributions. Indian National Science Day Symposium. 2012 招待講演
2011
  1. シン アロク. Very high strength magnesium alloys with ductility by application of quasicrystals as strengthening phase. 第16回準結晶研究会. 2011
  2. ロザリエ ジュリアン マーク, 染川 英俊, シン アロク, 向井 敏司. Enhancing precipitation strengthening in magnesium-zinc alloys through controlled deformation. Global Challenges in Health and Environment. 2011
  3. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司. Production of ultra fine grain size by direct extrusion of a chill cast Mg-Zn-Y alloy containing quasicrystal phase with a very high isotropic strength. International Conference on Advanced Technology in Experimental . 2011
  4. シン アロク, ロザリエ ジュリアン マーク. Arrangement of basic icosahedral units in formation of the Mg-Zn complex metallic alloys (CMAs). Structural Chemistry Group Seminar. 2011 招待講演
  5. シン アロク, 染川 英俊, 向井 敏司. Formation of Nano-scale Twins and Low Angle Boundaries during Fracture of a Fine Grained Magnesium Alloy. 12th International Symposium on Physics of Materials. 2011
  6. シン アロク, ロザリエ ジュリアン マーク. Family of Icosahedral Coordination Compounds and their Structures in Mg-Zn and Mg-Al-Zn Alloys. International Conference on Electron Nanoscopy, EM50. 2011 招待講演
  7. シン アロク, 染川 英俊, 松下 能孝, 蔡 安邦. Solidification of tin on quasicrystal surfaces. The 6th Asian International Workshop on Quasicrystals (AIWQ6). 2011 招待講演
  8. SINGH, Alok. Improved Processing of Mg-Zn-Y alloys containing quasicrystal phase for isotropic high strength and ductility. TMS Annual Meeting and Exhibition. 2011
2010
  1. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司. Ultra-High strengths by improved processing of quasicrystal containing Mg alloys. NIMS-UCSB Workshop. 2010 招待講演
  2. 向井 敏司, 染川 英俊, シン アロク, 井上 忠信. Grain Refinement of Mg-Al-Zn Alloy by Repetitive Oblique Shear Strain. KIM-JIM Joint Symposium. 2010 招待講演
  3. シン アロク. Novel approaches to strengthening of magnesium alloys for structural application. India-Japan Symposium On Emerging Technologies. 2010 招待講演
  4. シン アロク, 大澤 嘉昭, 染川 英俊, 向井 敏司. Isotropic high strength by improved processing of quasicrystal containing Mg-Zn-Y alloys. 日本金属学会2010年秋大会. 2010
  5. ロザリエ ジュリアン マーク, 染川 英俊, シン アロク, 向井 敏司. Structural and orientation relationships between intermetallic phases in Mg-Zn-Y alloys. 21st Australian Conference on Microscopy & Microanalysis. 2010
  6. 向井 敏司, 染川 英俊, シン アロク. Strengthening Mg alloys with enhancing their ductility and toughness. STAC-4. 2010 招待講演
  7. シン アロク, ロザリエ ジュリアン マーク, 染川 英俊, 向井 敏司. Coexistence of Mg4Zn7 and MgZn2 phases in Mg-Zn-Y alloys and their relationship to quasicrystals. 11th International Conference on Quasicrystals (ICQ11). 2010
  8. 染川 英俊, シン アロク, 大澤 嘉昭, 向井 敏司. Mg-Zn-Al alloys containing quasicrystal and related phases for structural applications. 11th International Conference on Quasicrystals (ICQ11). 2010
  9. シン アロク, ロザリエ ジュリアン マーク, 染川 英俊, 向井 敏司. Structure and disorder in beta1. 日本金属学会2010年春期大会. 2010
  10. 染川 英俊, 中島 清美, 杉本 喜正, 井上 忠信, シン アロク, 向井 敏司. マグネシウム合金の破壊メカニズムに及ぼす結晶粒径の影響. 日本金属学会2010年春期大会. 2010
  11. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. On the role of dislocations in precipitation strengthening of Mg-Zn(-Y) alloys. 日本金属学会2010年春期（第146回）大会講演. 2010
2009
  1. 染川 英俊, シン アロク, 向井 敏司. 準結晶粒子分散によるマグネシウム合金の高性能化. 準結晶研究会. 2009
  2. シン アロク, 染川 英俊, 向井 敏司. Effective dispersion of icosahedral phase in Mg-Zn-RE　alloys for very high strengths with ductility. 第14回準結晶研究会. 2009
  3. 向井 敏司, 染川 英俊, シン アロク. Microstructure Design of High-strength Mg Alloy with Ductility and Toughness. PFAM18. 2009 招待講演
  4. 染川 英俊, 大澤 嘉昭, シン アロク, 向井 敏司. 希土類フリー準結晶分散マグネシウム合金の機械的特性. 第117回軽金属学会秋期大会. 2009
  5. シン アロク, ロザリエ ジュリアン マーク, 染川 英俊, 向井 敏司. 日本金属学会2009年度秋期大会. 日本金属学会2009年度秋期大会. 2009
  6. 染川 英俊, シン アロク, 井上 忠信, 向井 敏司. 希土類元素フリーによる高靭性マグネシウム合金の創製. 日本金属学会2009年秋期大会. 2009
  7. 向井 敏司, 染川 英俊, シン アロク, 井上 忠信. 強ひずみ圧延加工によるMg-Al-Zn合金の結晶粒微細化. 日本金属学会2009年秋期大会. 2009
  8. 染川 英俊, シン アロク, 向井 敏司. High strength and toughness in magnesium alloys . The 5th Asian International Workshop on Quasicrystals. 2009
  9. シン アロク, 染川 英俊, 向井 敏司. Achieving very high strengths with ductility in Mg-Zn-RE alloys by precipitating nano-sized icosahedral phase. The 5th Asian International Workshop on Quasicrytals (AIWQ5). 2009
  10. 染川 英俊, シン アロク, 向井 敏司. 準結晶粒子分散マグネシウム合金の超塑性挙動. 第40回塑性加工春季講演会. 2009
  11. シン アロク, 染川 英俊, 向井 敏司. Strengthening in magnesium alloys by dynamic precipitation of nano-icosahedral phase particles. 日本金属学会2009年春期講演大会. 2009
  12. 染川 英俊, シン アロク, 大澤 嘉昭, 向井 敏司. 希土類元素フリーによる近似準結晶粒子分散マグネシウム合金の創製. 日本金属学会2009年春期大会. 2009
  13. シン アロク, 染川 英俊, 向井 敏司. Thermal-mechanical processes to achieve peak strength in Mg-Zn-RE alloys. TMS 2009 Annual Meeting and Exhibition. 2009
  14. シン アロク, 染川 英俊, 蔡 安邦. Solidification behavior of tin on quasicrystalline surfaces. TMS 2009 Annual Meeting and Exhibition. 2009
  15. シン アロク, 染川 英俊, 蔡 安邦. Interfaces of tin with Al-Cu-Fe quasicrystalline phase and its effect on solidification behavior of tin. TMS 2009 Annual Meeting and Exhibition. 2009
2008
  1. シン アロク, 染川 英俊, 蔡 安邦. Variation in the interface structure of tin particles with Al-Cu-Fe quasicrystallinen phase and its effect on the solidification behavior of tin. 平成20年度準結晶研究会. 2008
  2. 染川 英俊, 大澤 嘉昭, シン アロク, 向井 敏司. 機械的特性に及ぼす析出粒子形態の影響. 第115回軽金属学会秋期大会. 2008
  3. シン アロク, 染川 英俊, 蔡 安邦. Solidification of tin on quasicrystalline surfaces. 日本金属学会 2008年秋期(第143 回)大会講演. 2008
  4. ロザリエ ジュリアン マーク, 染川 英俊, シン アロク, 向井 敏司. Nucleation of low aspect-ratio beta-1. 日本金属学会第143回秋期講演大会. 2008
  5. シン アロク, 染川 英俊, 向井 敏司. Application of Icosahedral Phase in Developing New Magnesium Alloys for Structural Applications. 10th International Conference on Quasicrystals - Zurich 2008. 2008 招待講演
  6. シン アロク, 染川 英俊, 蔡 安邦. Solidification of tin on quasicrystalline surfaces. 10th International Conference on Quasicrystals. 2008
  7. シン アロク. Mg-Zn-Y合金の相変態と微細組織に影響を及ぼす熱処理. 社団法人 軽金属学会 第114回春期大会. 2008
  8. 向井 敏司, 染川 英俊, シン アロク, 井上 忠信. 強ひずみ加工圧延によるマグネシウム合金の高強度化. 日本金属学会2008年春期大会. 2008
  9. 染川 英俊, シン アロク, 大澤 嘉昭, 向井 敏司. 準結晶分散による高強度-高靭性マグネシウム合金の創製. 日本金属学会2008年春期大会. 2008
  10. シン アロク, 蔡 安邦. &quot;Effect of Interfaces on Melting and Solidification Behavior of Lead, Bismuth and Tin Embedded in Icosahedral Quasicrystalline Phase. TMS Annual Meeting 2008. 2008
  11. SINGH, Alok. Phase Relations, Formation and Morphologies in Mg-Zn-RE (RE=Y, rare earth) alloys. TMS Annual Meeting 2008. 2008
  12. 向井 敏司, 染川 英俊, シン アロク, 庄司哲也, 加藤晃. Texture modification to reduce yield anisotropy in wrought Mg alloys. TMS annual meeting 2008. 2008
  13. シン アロク, 蔡 安邦. Interfaces of Bismuth Nano-particles Embedded in Al-Cu-Fe Icosahedral Phase and its Effect on Melting and Solidification Behavior of Bismuth. TMS Annual Meeting 2008. 2008
2007
  1. シン アロク, 蔡 安邦. Dependence of melting and solidification behavior of lead, bismuth and tin nano-particles embedded in Al-Cu-Fe icosahedral phase on interface structures. 準結晶研究会. 2007
  2. SINGH, Alok. Strengthening contributions of quasicrystalline icosahedral phase to tensile and compressive strength in Mg-Zn-RE alloys. PFAM XVI. 2007 招待講演
  3. 向井 敏司, 横山嘉彦, シン アロク, 井上明久. Zr基バルク金属ガラスの高速変形挙動に及ぼす組成の影響. 第51回材料工学連合講演会. 2007
  4. シン アロク, 染川 英俊, 向井 敏司. Achieving High Strength and High Ductility in Magnesium Alloys by Dispersion of Nano-particles of Icosahedral Phase . International Symposium on Sustainable Energy and Materials. 2007
  5. 向井 敏司, 染川 英俊, シン アロク. Microstructure design of high-strength Mg alloy with fracture toughness. ISSEM 2007 . 2007
  6. 染川 英俊, 井上 忠信, シン アロク, 向井 敏司. 溝ロール圧延マグネシウム合金の微細組織. 第58回塑性加工連合講演会. 2007
  7. 向井 敏司, 染川 英俊, シン アロク, 井上 忠信. 強ひずみ加工によるマグネシウム合金の結晶粒微細化と機械的性質改良. 第58回塑性加工連合講演会. 2007
  8. 劉 新宝, 大澤 嘉昭, 高森 晋, シン アロク, 向井 敏司. Microstructure and mechanical properties of ZA84 magnesium alloy prepared with ultrasonic vibration. 2nd Asian Symposium on Magnesium Alloys (ASMA-II). 2007
  9. シン アロク, 染川 英俊, 向井 敏司. Strengthening Effects Of Icosahedral Phase In Tension And Compression In Mg-Zn-Ho Alloys. 2nd Asian Symposium on Magnesium Alloys (ASMA-II). 2007
  10. 向井 敏司, 染川 英俊, シン アロク. Microstructure design of high-strength Mg alloy with ductility and toughness. 2nd Asian Symposium on Magnesium Alloys (ASMA-II). 2007 招待講演
  11. 染川 英俊, シン アロク, 向井 敏司. Enhancement of fracture toughness in magnesium alloys by microstructure controls. 2nd Asian Symposium on Magnesium Alloys. 2007
  12. シン アロク, 染川 英俊, 向井 敏司. Design of High Strength, High Ductility and High Toughness Magnesium Alloys by Dispersion of Nano-sized Icosahedral Phase Particles. 2nd Asian Symposium on Magnesium Alloys. 2007 招待講演
  13. 染川 英俊, シン アロク, 大澤 嘉昭, 向井 敏司. マグネシウム合金の破壊靭性値に及ぼす析出粒子の影響. 日本金属学会2007年秋期大会. 2007
  14. 向井 敏司, 染川 英俊, シン アロク, 井上 忠信. 結晶粒微細化によるマグネシウム合金の高強度化. 日本金属学会・2007年秋期大会. 2007
  15. シン アロク, 染川 英俊, 向井 敏司. Effect of extrusion microstructures on tensile and compressive strengths of Mg-Zn-Ho alloys containing quasicrystalline phase. 日本金属学会2007年秋期講演大会. 2007
  16. 染川 英俊, シン アロク, 向井 敏司. Effect of microstructural characteristics on fracture toughness in wrought magnesium alloys. The Doyama Symposium on Advanced Materials . 2007
  17. 向井 敏司, 染川 英俊, シン アロク. Microstructure design of high-strength Mg alloy with ductility and toughness. The Doyama Symposium on Advanced Materials. 2007 招待講演
  18. 染川 英俊, シン アロク, 向井 敏司. 強ひずみ加工マグネシウム合金の破壊靭性値に関する研究. 第56期学術講演会. 2007
  19. 染川 英俊, シン アロク, 大澤 嘉昭, 向井 敏司. 準結晶分散マグネシウム合金の破壊靭性値. 第112回軽金属学会春期大会. 2007
  20. ヴィエラ　ガロトネロヴァ, シン アロク, アレス　ジャゲル, 染川 英俊, 向井 敏司. Deformation behavior and deformation structures of ultra-fine grained Mg-0.3at%Al alloy in compression . 日本金属学会 2007年春期講演大会. 2007
  21. 向井 敏司, 染川 英俊, シン アロク, 庄司哲也, 加藤晃. マグネシウム展伸材の室温強度-延性バランス改善に向けた結晶組織制御. 日本金属学会2007年春期大会. 2007
  22. 染川 英俊, シン アロク, 向井 敏司. 微細結晶粒ZK60マグネシウム合金押出材の破壊靭性値. 日本金属学会2007年春期大会. 2007
  23. シン アロク. Effect of Interface Structures on the Stability of Nano-Particles and Strength of Alloys. The Second Japan-India Workshop on Optronic Materials and Device. 2007 招待講演
  24. シン アロク. Quasicrystal reinforced Mg alloys. 準結晶-この5年の歩み-. 2007 招待講演
  25. 染川 英俊, シン アロク, 向井 敏司. Control of grain size and precipitate shape on fracture toughness . TMS annual meeting 2007. 2007
  26. シン アロク, 染川 英俊, 向井 敏司. Effect of quasicrystal phase on recrystallization, texture and yield strength of extruded Mg-Zn-Ho alloys. TMS 2007 Annual Meeting & Exhibition. 2007
2006
  1. SINGH, Alok. Microstructure and strength of Mg-Zn-Ho alloys containing quasicrystal phase. 45th Conference of Metallurgists. 2006
  2. SINGH, Alok. Deformation structures and yield asymmetry in extruded Mg-Zn-Y alloys containing quasicrystal phase. 45th Conference of Metallurgists. 2006
  3. S. Ranganathan, Eric A. Lord, N.K. Mukhopadhyay, シン アロク. A symmetrical Indexing scheme for decagonal quasicrystals analogous to Miller-Bravais indexing of hexagonal crystals. fifth International Conference on Aperiodic Crystals. 2006
  4. シン アロク, 際安邦. Interfaces of icosahedral phase with α-Mg and pure Bi nanoparticles . fifth International Conference on Aperiodic Crystals. 2006
  5. シン アロク, 染川 英俊, 向井 敏司. Enhancement of Compressive Strength by Quasicrystal Phase in Mg-Zn-Ho Alloys . 日本金属学会2006年秋期大会 . 2006
  6. 染川 英俊, シン アロク, 向井 敏司. マグネシウム合金の破壊靭性値に及ぼす析出粒子形態の影響. 日本金属学会2006年秋期大会. 2006
  7. シン アロク, 蔡 安邦. Interfaces of Magnesium with Icosahedral Phase in Mg-Zn-Y Alloys. 16th International Microscopy Congress. 2006
  8. シン アロク, 蔡 安邦. Interfaces of Bismuth Nano-Particles with Al-Cu-Fe Icosahedral Phase and its Effect on Melting Behavior of Bismuth. 16th International Microscopy Congress. 2006
  9. ビエラ　ガルテネロヴァ, シン アロク, アレシュ　イエーガー, 向井 敏司. Structure and Deformation Phenomena in Hexagonal Mg-0.3at%Al Studied by SEM-EBSD and TEM. The 16th International Microscopy Congress. 2006
  10. シン アロク, 蔡 安邦. Interfaces of metal nano-particles with icosahedral and its effect on the melting and solidification behavior of the nano-particles. Eighth International Conference on Nanostructured Materials . 2006
  11. 染川 英俊, シン アロク, 金 漢洙, 向井 敏司. マグネシウム合金の破壊靭性値とその変形組織に及ぼす結晶粒径の影響. 第55期学術講演会. 2006
  12. シン アロク, 染川 英俊, 向井 敏司. 準結晶分散Mg-Zn-Ho合金の強度に及ぼす結晶粒径と粒子分布の影響. 第110回春期大会. 2006
  13. シン アロク, 染川 英俊, 向井 敏司. Microstructure and strength of extruded Mg-Zn-Ho alloys containing quasicrystal phase. 日本金属学会2006年春期講演大会. 2006
  14. シン アロク, 蔡 安邦. Interfaces of icosahedral phase with a-Mg and pure Pb and Bi nanoparticles and its effect on properties. 日本金属学会2006年春期講演大会. 2006
  15. 染川 英俊, シン アロク, 向井 敏司. ECAE加工したAZ31マグネシウム合金の破壊靭性値とその変形組織観察. 日本金属学会2006年春期大会. 2006
2005
  1. シン アロク, 蔡 安邦. Interfaces of magnesium with icosahedral phase. 2005 年準結晶研究会 --準結晶研究の最近の展開--. 2005
  2. シン アロク, 蔡 安邦. Effect of interfaces of metal nanoparticles with iscosahedral phase on their melting and solidification behavior. 2005 年準結晶研究会 --準結晶研究の最近の展開--. 2005
  3. シン アロク, 蔡 安邦. Mechanical properties and microstructure of a quasicrystal containing Mg-Zn-Al-Y alloy. JIM 2005 Fall Annual Meeting (2005年秋期講演大会). 2005
  4. シン アロク, 染川 英俊, 向井 敏司, 蔡 安邦. Isotropic deformation behavior in magnesium alloys containing quasicrystalline phase. JIM 2005 Fall Annual Meeting (2005年秋期講演大会). 2005
  5. シン アロク, 蔡 安邦. Melting Behaviour of Lead and Bismuth Nano-Particles in Al-Cu-Fe Quasicrystalline Matrix &#8211; Role of Interfaces. 12th International Conference on Rapidly Quenched and Metastable. 2005
  6. シン アロク, 蔡 安邦. Stability and diffraction features of icosahedral quasicrystal and a 2/1 approximant phase in an Au42In42Yb16 alloy. 12th International Conference on Rapidly Quenched and Metastable. 2005
  7. シン アロク, Masaki Watanabe, Akira Kato, 蔡 安邦. Strengthening Effects of Icosahedral Phase in Magnesium Alloys. 9th International Conference on Quasicrystals. 2005
  8. シン アロク, Masaki Watanabe, Akira Kato, 蔡 安邦. Composites of 14H Phase in Magnesium Alloys by Squeeze Casting. JIM Spring Meeting. 2005
  9. SINGH, Alok. Effect of Heat-Treatment on Microstructure and Strength of Quasicrystal Containing Extruded Mg-Zn-Y Alloys. TMS Annual Meeting. 2005
2004
  1. シン アロク, Watanabe Masaki, Kato Akira, 蔡 安邦. Microstrucutre and deformation behavior of an extruded Mg-Zn-Al-Y alloy. Japan Institute of Metals, Autumn Meeting 2004. 2004
  2. シン アロク, M. Watanabe, A. Kato, TSAI AN PANG. Strengthening in quasicrystal-containing Mg-Zn-Y extruded alloys for elevated temperature applications. THE THIRD ASIA INTERNATIONAL WORKSHOP ON QUASICRYSTALS. 2004

その他の文献 TSV

2023
  1. 小川 由希子, チャンディラン エランゴ, シン アロク, 染川 英俊. HCP/BCC Mg-Sc合金の機械的および機能的特性. 金属. 93 [11] (2023) 983-989
  2. 染川 英俊, ドゥデクラ アルタフ バシャ, 小川 由希子, シン アロク. 粒界偏析制御によるMg合金展伸材の室温塑性変形. 熱処理. 63 [5] (2023) 249-250
2018
  1. 向井俊司, シン アロク, 土谷 浩一. 強ひずみ加工による高エントロピー合金の高強度化. 日本機械学会誌. 121 [1192] (2018) 24-27
2017
  1. Nayuta Takemori, SINGH, Alok. Latest trends in quasicrystal research. CURRENT SCIENCE. (2017) 377-379
2016
  1. SINGH, Alok, Kiran N. Solanki, Michele V. Manuel, Neale R. Neelameghham. Preface. Magnesium Technology 2016. (2016) xi-xii
2015
  1. Michele V. Manuel, SINGH, Alok, Martyn Alderman, Neale R. Neelameghham. Preface. Magnesium Technology 2015. (2015) xi-xii
2009
  1. ROSALIE, Julian Mark, SOMEKAWA, Hidetoshi, SINGH, Alok, MUKAI, Toshiji. 8th International Conference on Magnesium alloys and their applications. Magnesium. (2009) 288-294
2008
  1. Alok Singh, A P Tsai. Quasicrystal-Crystal Interfaces in Bulk Materials . Journal of Physics: Condensed Matter. 20 [31] (2008) 314002 10.1088/0953-8984/20/31/314002
2007
  1. SINGH, Alok, SOMEKAWA, Hidetoshi, MUKAI, Toshiji. Strengthening contributions of quasicrystalline icosahedral phase to tensile and compressive strength in Mg-Zn-RE alloys. Proc. 16th Int. Conf. on Processing and Fabrication of Advanced Materials XVI. (2007) 492-503
2005
  1. SINGH, Alok, Masaki Watanabe, Akira Kato, TSAI, Anpang. Effect of Heat-Treatment on Microstructure and Strength of Quasicrystal Containing Extruded Mg-Zn-Y Alloys. Magnesium Technology 2005. (2005) 105-110

公開特許出願 TSV

  1. マグネシウム基合金伸展材及びその製造方法 (2019)
  2. ナノコーティング材料およびその製造方法、コーティング剤、機能性材料及びその製造方法 (2017)
  3. マグネシウム合金、マグネシウム合金部材並びにその製造方法、マグネシウム合金の使用方法 (2016)
  4. マグネシウム基合金展伸材及びその製造方法 (2016)
  5. マグネシウム展伸合金およびその製造方法 (2014)
  6. マグネシウム合金とその製造方法 (2014)
  7. Mg合金部材 (2012)
  8. マグネシウム合金 (2011)
  9. マグネシウム合金 (2011)
  10. Ｍｇ基合金 (2011)
  11. Mg基合金 (2010)
  12. Ｍｇ合金部材。 (2010)
  13. マグネシウム合金 (2010)
  14. マグネシウム合金の温間加工方法 (2009)
  15. 耐摩耗性マグネシウム合金 (2008)
  16. 高強度マグネシウム合金およびその製造方法 (2005)
  17. 高強度マグネシウム合金およびその製造方法 (2005)

▲ページトップへ移動