| 9件の論文が見つかりました。論文は出版年月日順に表示しています。（ヘルプ） | |
|---|
| Masayuki Okugawa, Kenji Saito, Haruki Yoshima, Katsuhiko Sawaizumi, Sukeharu Nomoto, Makoto Watanabe, Takayoshi Nakano, Yuichiro Koizumi. Solute segregation in a rapidly solidified Hastelloy-X Ni-based superalloy during laser powder bed fusion investigated by phase-field and computational thermal-fluid dynamics simulations. Additive Manufacturing. 84 (2024) 104079 10.1016/j.addma.2024.104079 Open Access | |
| Masahiro Kusano, Yusuke Takata, Atsushi Yumoto, Makoto Watanabe. Effects of time per layer and part geometry on thermal history and microcracking in the fabrication of nickel superalloy samples by laser powder bed fusion. Additive Manufacturing. 80 (2024) 103987 10.1016/j.addma.2024.103987 Open Access | |
| G. Álvarez, Z. Harris, K. Wada, C. Rodríguez, E. Martínez-Pañeda. Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: Influence of post-processing, printing direction, temperature and pre-straining. Additive Manufacturing. 78 (2023) 103834 10.1016/j.addma.2023.103834 Open Access | |
| Tomotaka Hatakeyama, Kota Sawada, Masaru Suzuki, Makoto Watanabe. Microstructure development of modified 9Cr-1Mo steel during laser powder bed fusion and heat treatment. Additive Manufacturing. 61 (2023) 103350 10.1016/j.addma.2022.103350 Open Access | |
| Dennis Edgard Jodi, Tomonori Kitashima, Yuichiro Koizumi, Takayoshi Nakano, Makoto Watanabe. Manufacturing single crystals of pure nickel via selective laser melting with a flat-top laser beam. Additive Manufacturing Letters. 3 (2022) 100066 10.1016/j.addlet.2022.100066 Open Access | |
| Yusuke Tsutsumi, Takuya Ishimoto, Tastuya Oishi, Tomoyo Manaka, Peng Chen, Maki Ashida, Kotaro Doi, Hideki Katayama, Takao Hanawa, Takayoshi Nakano. Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion. Additive Manufacturing. 45 (2021) 102066 10.1016/j.addma.2021.102066 Open Access | |
| KITANO, Houichi. Effect of plastic strain on the solidification cracking of Hastelloy-X in the selective laser melting process. Additive Manufacturing. 37 (2021) 101742 10.1016/j.addma.2020.101742 Open Access | |
| Kaita Ito, Masahiro Kusano, Masahiko Demura, Makoto Watanabe. Detection and location of microdefects during selective laser melting by wireless acoustic emission measurement. Additive Manufacturing. 40 (2021) 101915 10.1016/j.addma.2021.101915 Open Access | |
| Toshio Tokairin, Junichi Hayashi, VILLORA, Garcia, SHIMAMURA, Kiyoshi. Growth of Y3Al5O12 Single Crystals via Edge-Defined Film-Fed Growth Technique Using MO Crucibles. Additive Manufacturing and Strategic Technologies in Advanced Ceramics. 258 (2016) 113-120 | |
