- Address
- 305-0047 茨城県つくば市千現1-2-1 [アクセス]
[論文] | [書籍] | [会議録] | [口頭発表] | [その他の文献] | [公開特許出願]
論文 TSV
2024
- Hidetoshi Somekawa, Rintaro Ueji, Alok Singh. Mechanical response in tension of twin-induced Mg alloys in wide strain rate regimes. Materials Science and Engineering: A. 897 (2024) 146319 10.1016/j.msea.2024.146319
- Takumi Akada, Rintaro Ueji, Masatoshi Mitsuhara, Shigeto Yamasaki, Masaki Tanaka. Plastic anisotropy in yield stress of drawn pearlitic steels. Materials Science and Engineering: A. 898 (2024) 146380 10.1016/j.msea.2024.146380
- Hai Qiu, Rintaro Ueji, Tadanobu Inoue. Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel. Metals. 14 [3] (2024) 306 10.3390/met14030306 Open Access
- Rintaro Ueji, Wu Gong, Stefanus Harjo, Takuro Kawasaki, Akinobu Shibata, Yuuji Kimura, Tadanobu Inoue, Noriyuki Tsuchida. Deformation-induced Martensitic Transformation at Tensile and Compressive Deformations of Bainitic Steels with Different Carbon Contents. ISIJ International. 64 [2] (2024) ISIJINT-2023-253 10.2355/isijinternational.isijint-2023-253 Open Access
- Elango Chandiran, Yukiko Ogawa, Rintaro Ueji, Alok Singh, Hidetoshi Somekawa, Takahito Ohmura. Activation of non type dislocation in near <0001>-oriented Mg by Sc addition. Materials Science and Engineering: A. 890 (2024) 145927 10.1016/j.msea.2023.145927
2023
- Hai Qiu, Rintaro Ueji, Tadanobu Inoue. Yield-Point Phenomenon and Plastic Bands in Ferrite–Pearlite Steels. Materials. 16 [1] (2023) 195 10.3390/ma16010195 Open Access
- Elango Chandiran, Yukiko Ogawa, Rintaro Ueji, Alok Singh, Hidetoshi Somekawa. Enhancement of damping capacity by deformation-induced martensitic transformation in Mg–Sc alloy. Materials Science and Engineering: A. 880 (2023) 145198 10.1016/j.msea.2023.145198
- Takeshi Teramoto, Kentaro Kitasumi, Ryota Shimohara, Yusuke Ito, Ryouga Shimizu, Katsushi Tanaka, Rintaro Ueji. Formation condition and effect on the early stages of plastic deformation of chemical short-range order in Cr-Co-Ni medium-entropy alloy. Journal of Alloys and Compounds. 941 (2023) 169016 10.1016/j.jallcom.2023.169016
- N. Tsuchida, R. Ueji, W. Gong, T. Kawasaki, S. Harjo. Stress partitioning between bcc and cementite phases discussed from phase stress and dislocation density in martensite steels. Scripta Materialia. 222 (2023) 115002 10.1016/j.scriptamat.2022.115002
- Elango Chandiran, Yukiko Ogawa, Rintaro Ueji, Hidetoshi Somekawa. An inverse Hall-Petch relationship during room-temperature compression of commercially pure magnesium. Journal of Alloys and Compounds. 930 (2023) 167443 10.1016/j.jallcom.2022.167443
- Rintaro Ueji, Kenji Nagata, Hidetoshi Somekawa, Masahiko Demura. Application of a sparse mixed regression method to design the optimal composition and heat treatment conditions for transformation-induced plasticity steel with high strength and large elongation. Scripta Materialia. 222 (2023) 115028 10.1016/j.scriptamat.2022.115028
2022
- Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue. Preferable Resistance against Hydrogen Embrittlement of Pearlitic Steel Deformed by Caliber Rolling. ISIJ International. 62 [2] (2022) ISIJINT-2021-429 10.2355/isijinternational.isijint-2021-429 Open Access
- Noriyuki Tsuchida, Rintaro Ueji, Tadanobu Inoue. True Stress–True Strain Relationship up to the Plastic Deformation Limit in Ferrite–Pearlite Steel at Various Temperatures. ISIJ International. 62 [2] (2022) ISIJINT-2021-181 10.2355/isijinternational.isijint-2021-181 Open Access
- 上路 林太郎, 井上 忠信. 日本刀型鋼板に関する研究の構想およびその後の研究. ぷらすとす. 5 [52] (2022) 217-220 10.32277/plastos.5.52_217
- Rintaro Ueji, Hidetoshi Somekawa, Tadanobu Inoue, Toru Hara. Compression temperature to activate kinking in pearlitic steel. Materials Science and Engineering: A. 857 (2022) 144018 10.1016/j.msea.2022.144018
- Elango Chandiran, Rintaro Ueji, Yukiko Ogawa, Kenta Nagata, Hidetoshi Somekawa, Masahiko Demura. Deformation behaviour of novel medium carbon bainitic steels with different retained austenite characteristics designed by the sparse mixed regression model. Journal of Materials Research and Technology. 19 (2022) 2179-2190 10.1016/j.jmrt.2022.05.193 Open Access
2021
- Noriyuki Tsuchida, Rintaro Ueji, Tadanobu Inoue. Effect of Temperature on Stress–Strain Curve in SUS316L Metastable Austenitic Stainless Steel Studied by In Situ Neutron Diffraction Experiments. ISIJ International. 61 [2] (2021) 632-640 10.2355/isijinternational.isijint-2020-547 Open Access
- Rintaro Ueji, Yuuji Kimura, Kohsaku Ushioda, Takahito Ohmura, Tadanobu Inoue. Bainite Transformation and Resultant Tensile Properties of 0.6%C Low Alloyed Steels with Different Prior Austenite Grain Sizes. ISIJ International. 61 [2] (2021) 582-590 10.2355/isijinternational.isijint-2020-389 Open Access
- 井上 忠信, 上路 林太郎, 川島 義也, 藤﨑 百合恵, 澤田 浩太, 木村 一弘. 物質・材料研究機構での研究トピックスと企業連携. ぷらすとす. (2021) T3912 10.32277/plastos.4.47_745
- Hai Qiu, Rintaro Ueji, Tadanobu Inoue, Yuuji Kimura. Plastic Instability in Medium-Carbon Tempered Martensite Steel. Materials. 14 [16] (2021) 4609 10.3390/ma14164609 Open Access
- Hai Qiu, Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue. Grain-to-Grain Interaction Effect in Polycrystalline Plain Low-Carbon Steel within Elastic Deformation Region. Materials. 14 [8] (2021) 1865 10.3390/ma14081865 Open Access
- Tadanobu Inoue, Hai Qiu, Rintaro Ueji, Yuuji Kimura. Ductile-to-Brittle Transition and Brittle Fracture Stress of Ultrafine-Grained Low-Carbon Steel. Materials. 14 [7] (2021) 1634 10.3390/ma14071634 Open Access
- R Ueji, Y Kimura, K Ushioda, T Ohmura, T Inoue, A Shibata. Orientation dependence of transformation induced plasticity in high carbon bainitic steel. IOP Conference Series: Materials Science and Engineering. (2021) 012022 10.1088/1757-899x/1121/1/012022 Open Access
- Rintaro Ueji, Akinobu Shibata, Kohsaku Ushioda, Yuuji Kimura, Takahito Ohmura, Tadanobu Inoue. Crystallographic orientation dependence of deformation-induced martensitic transformation of 1.3 GPa-class 0.6 %C bainitic steel with retained austenite. Scripta Materialia. 194 (2021) 113666 10.1016/j.scriptamat.2020.113666
- Tadanobu Inoue, Rintaro Ueji. Effect of strain and deformation mode on cube texture formation in warm bi-axial rolled low-carbon steel. Finite Elements in Analysis and Design. 183-184 (2021) 103491 10.1016/j.finel.2020.103491 Open Access
2020
- Hai Qiu, Tadanobu Inoue, Rintaro Ueji. Experimental measurement of the variables of Lüders deformation in hot-rolled steel via digital image correlation. Materials Science and Engineering: A. 790 (2020) 139756 10.1016/j.msea.2020.139756
- Hai Qiu, Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue. Heterogeneous Distribution of Microstrain Evolved During Tensile Deformation of Polycrystalline Plain Low Carbon Steel. Metals. 10 [6] (2020) 774 10.3390/met10060774 Open Access
- Tadanobu Inoue, Rintaro Ueji. Improvement of strength, toughness and ductility in ultrafine-grained low-carbon steel processed by warm bi-axial rolling. Materials Science and Engineering: A. 786 (2020) 139415 10.1016/j.msea.2020.139415
- Hai Qiu, Tadanobu Inoue, Rintaro Ueji. In-Situ Observation of Lüders Band Formation in Hot-Rolled Steel via Digital Image Correlation. Metals. 10 [4] (2020) 530 10.3390/met10040530 Open Access
- Tadanobu Inoue, Hai Qiu, Rintaro Ueji. Through-Thickness Microstructure and Strain Distribution in Steel Sheets Rolled in a Large-Diameter Rolling Process. Metals. 10 [1] (2020) 91 10.3390/met10010091 Open Access
2019
- Nobuhiro Tsuji, Reza Gholizadeh, Rintaro Ueji, Naoya Kamikawa, Lijia Zhao, Yanzhong Tian, Yu Bai, Akinobu Shibata. Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys. MATERIALS TRANSACTIONS. 60 [8] (2019) 1518-1532 10.2320/matertrans.mf201936
- Rintaro Ueji, Tadanobu Inoue. Acceleration of pearlite transformation in a high-carbon steel by uniaxial compressive stress confirmed by volume measurements. Materials Letters. 256 (2019) 126637 10.1016/j.matlet.2019.126637
- Rintaro Ueji, Tadanobu Inoue. Acceleration of diffusional transformation in a high-carbon steel layer composed of a sandwich-like clad steel sheet. Materials Science and Engineering: A. 764 (2019) 138217 10.1016/j.msea.2019.138217
- Rintaro Ueji, Tadanobu Inoue. Effect of Interface Morphology on Tensile Properties of Carbon Steel Sheet with Sandwich Structure. steel research international. 90 [5] (2019) 1900015 10.1002/srin.201900015
- Tadanobu Inoue, Rintaro Ueji, Yuuji Kimura. Improvement of toughness and strength balance in low-carbon steel bars with cube texture processed by warm bi-axial rolling. Materials Letters. 240 (2019) 172-175 10.1016/j.matlet.2019.01.007
2018
- 井上 忠信, 上路 林太郎, 木村 勇次. 炭素鋼の強靭延性化の方向性. 日本機械学会論文集. 84 [866] (2018) 18-00237 10.1299/transjsme.18-00237 Open Access
2017
- 上路 林太郎, 井上 忠信. 日本刀型鋼板における層構成が及ぼす引張変形特性への影響. 塑性と加工. 58 [675] (2017) 323-329 10.9773/sosei.58.323
- C. Watanabe, R. Monzen, R. Ueji, H. Miura. Strain-Rate and Temperature Dependences of Deformation Behavior of AZ61Mg Alloy Processed by Multi-directional Forging Under Decreasing Temperature Conditions. Metallurgical and Materials Transactions A. 48 [11] (2017) 5368-5375 10.1007/s11661-017-4303-7
- Rintaro Ueji, Hai Qiu, Tadanobu Inoue. Strength and Ductility at High-speed Tensile Deformation of Low-carbon Steel with Ultrafine Grains. MATERIALS TRANSACTIONS. 58 [10] (2017) 1487-1492 10.2320/matertrans.m2017191
2016
- Nozomu Adachi, Ningning Wu, Yoshikazu Todaka, Hideyuki Sato, Rintaro Ueji. Phase transformation in Fe–Mn–C alloys by severe plastic deformation under high pressure. Materials Letters. 185 (2016) 109-111 10.1016/j.matlet.2016.08.113
書籍 TSV
会議録 TSV
2023
- A. Shibata, N. Tsuchida, S. Harjo, T. Inoue, T. Kawasaki, W. Gong, Y. Kimura, R. Ueji. Deformation-Induced Martensitic Transformation at Tensile and Compressive Deformations of High-Carbon Bainitic Steel. International Symposium on New Developments in Advanced High-Strength Sheet Steels. (2023) 10.33313/298/030
口頭発表 TSV
2024
- 松山 朱莉, 前田 龍生, 佐々木大輔, 津﨑 兼彰, 上路 林太郎. 伸長パーライト組織の衝撃特性における試験片サイズ依存性. 日本鉄鋼協会2024年春季(第187回)講演大会. 2024
- UEJI, Rintaro, SOMEKAWA, Hidetoshi, EMURA, Satoshi, SHIBATA, Akinobu. Yield stress anisotropy of carbon steel with elongated pearlite. TMS 2024 Annual meeting & Exhibition. 2024
- 上路 林太郎. 加工熱処理によるパーライト鋼の組織制御と今後の可能性. 日本金属学会東北支部講演会. 2024 招待講演
2023
- 前田龍生, 松山朱莉, 佐々木大輔, 津﨑 兼彰, 上路 林太郎. 冷間加工により得られた伸長パーライト組織を有するばね鋼のシャルピー衝撃特性. 日本熱処理技術協会 第96回秋季講演大会. 2023
- UEJI, Rintaro. Deformation microstructure of pearlitic steel at different conditions. PRICM11 The 11th Pacific Rim International Conference on Advanced Materials and Processing. 2023 招待講演
- 上路 林太郎, 染川 英俊, 江村 聡, 井上 忠信. 室温圧縮変形により生じるパーライト鋼の単軸降伏応力の異方性. 第74回塑性加工連合講演会. 2023
- 江村 聡, 上路 林太郎. 重ね合わせ圧縮によるTi-Mo合金積層材の室温引張特性. 公益社団法人日本金属学会2023年秋期(第173回)講演大会. 2023
- リー ゼハオ, 佐々木 泰祐, 上路 林太郎, 木村 勇次, 柴田 曉伸, 宝野 和博. 3 次元アトムプローブによるパーライト鋼中の水素トラップサイトの解析. 日本鉄鋼協会 第186回秋季講演大会. 2023
- 飛知和 純也, 小川 由希子, 寺田大将, 上路 林太郎, 染川 英俊. 微細結晶粒を有する各種アルミニウム合金の高速変形特性. 日本金属学会2023年秋期講演大会(第173回). 2023
- UEJI, Rintaro, Wu Gong, Stefanus Harjo, Takuro Kawasaki, SHIBATA, Akinobu, KIMURA, Yuuji, INOUE, Tadanobu, Noriyuki Tsuchida. Deformation-induced martensitic transformation at tensile and compressive deformations of high-carbon bainitic steel. International Symposium on New Dvelopments in Advanced High-Strength Sheet Steels. 2023
- 上路 林太郎. 炭素鋼のオーステナイトにおける変形と変態組織. 日本塑性加工学会 東北・北海道支部 2023年度総会および講演会. 2023 招待講演
- 江村 聡, 上路 林太郎, 小川 由希子, 染川 英俊. キンク変形組織を有するTi-12Mo合金の室温引張特性の評価. 軽金属学会第144回春期大会. 2023
- 江村 聡, 上路 林太郎. 重ね合わせ圧縮によるTi-Mo 合金積層材の作製. 日本金属学会 2023年春期(第172回)講演大会. 2023
- 飛知和 純也, 小川 由希子, 寺田 大将, 上路 林太郎, 染川 英俊. 微細結晶粒を有する各種アルミニウム合金の室温引張変形. 日本金属学会2023年春期(第172回)講演大会. 2023
- 上路 林太郎. オーステナイトの変形と変態組織. 日本鉄鋼協会 第185回春季講演大会. 2023 招待講演
2022
- OGAWA, Yukiko, 中村 晶子, UEJI, Rintaro, EMURA, Satoshi, HARA, Toru, SOMEKAWA, Hidetoshi. Development of hcp/bcc layered structure in Mg-Sc alloy and kink formation by compression. LPSO/MFS2022 (The 5th International Symposium on Long-Period Stacking/Order Structure and Mille-feuille Structure). 2022
- UEJI, Rintaro, SOMEKAWA, Hidetoshi, EMURA, Satoshi, INOUE, Tadanobu. Kinking in Compression of Pearlitic Steel and Resultant Plastic Anisotropy. LPSO/MFS2022 (The 5th International Symposium on Long-Period Stacking/Order Structure and Mille-feuille Structure). 2022
- EMURA, Satoshi, UEJI, Rintaro, OGAWA, Yukiko, SOMEKAWA, Hidetoshi. Introduction of millefeuille-like α/β layered structure and investigation of its kink deformation behavior in β titanium alloys. LPSO/MFS2022 (The 5th International Symposium on Long-Period Stacking/Order Structure and Mille-feuille Structure). 2022
- 上路 林太郎, 染川 英俊, 江村 聡, 井上 忠信. 変形組織を有するパーライト鋼の圧縮変形の異方性. 第73回塑性加工連合講演会. 2022
- 江村 聡, 上路 林太郎. ミルフィーユ構造を持つTi-12Mo合金への圧縮試験によるキンク変形の導入. 日本金属学会 2022年秋期第171回講演大会 https://confit.atlas.jp/guide/event/jim2022autumn/top. 2022
- 上路 林太郎, 染川 英俊, 江村 聡, 井上 忠信. キンク状組織を有する圧縮パーライト鋼の塑性異方性. 日本金属学会2022年秋期第171回講演大会 https://confit.atlas.jp/guide/event/jim2022autumn/top. 2022
- 小川 由希子, 上路 林太郎, 江村 聡, 染川 英俊. Mg-Sc合金におけるミルフィーユ的hcp/bcc層状構造組織とキンク導入検討. 日本金属学会 2022年秋期(第171回)講演大会 https://confit.atlas.jp/guide/event/jim2022autumn/top. 2022
- 上路 林太郎, Wu Gong, Harjo Stefanus, 川崎卓郎, 柴田 曉伸, 木村 勇次, 井上 忠信. その場中性子回折を用いた高炭素TRIP鋼の引張および圧縮変形の比較. 2022年度塑性加工春季講演会 https://confit.atlas.jp/guide/event/jstps2022/top. 2022
- 江村 聡, 上路 林太郎. ミルフィーユ構造を有するTi-Cr合金へのキンク状変形の導入. 軽金属学会第142回春期大会 https://meeting.jilm.or.jp/142/. 2022 招待講演
- 田中 克志, 北角健太郎, 篠原諒, 下原涼大, 寺本武司, 上路 林太郎. CrCoNiミディアムエントロピー合金における短範囲規則の形成に伴う電気抵抗変化. 日本金属学会 2022年春期第170回講演大会 https://confit.atlas.jp/guide/event/jim2022spring/top?lang=ja. 2022 招待講演
2021
- 邱 海, 上路 林太郎, 井上 忠信. デジタル画像相関性によるオーバーマッチ溶接接手の変形挙動. 第63回塑性加工学会の技術懇談会「塑性加工における高度な材質データを取得する実験研究」. 2021 招待講演
- 上路 林太郎, 染川 英俊, 井上 忠信, 原 徹. パーライト鋼の圧縮変形によるキンク帯形成. 日本金属学会 2021年秋期(第169回)講演大会. 2021
- 上路 林太郎, 柴田 曉伸, 潮田 浩作, 木村 勇次, 大村 孝仁, 井上 忠信. 低合金TRIP鋼における変形誘起マルテンサイト変態の発生と 母相引張軸方位の関係. 日本金属学会 2021年春期大会. 2021
- 上路 林太郎, 木村 勇次, 潮田 浩作, 大村 孝仁, 井上 忠信, 柴田 曉伸. Orientation Dependence of Transformation Induced Plasticity in High Carbon Bainitic Steel. The 19th International Conference on Textures of Materials (ICOTOM 19). 2021
2020
- 北角 健太郎, 伊藤 祐介, 寺本 武司, 田中 克志, 上路 林太郎. CrCoNiミディアムエントロピー合金における短範囲秩序の形成. 日本金属学会2020年秋期講演大会. 2020
- 上路 林太郎, 井上 忠信. 高炭素鋼における等温拡散変態の応力依存性とオーステナイト粒径の関係. 日本鉄鋼協会第180回秋季講演大会. 2020
- 上路 林太郎, 井上 忠信. Effect of Compressive Stress on Diffusional Transformation in 0.5 %C Spring Steels with Different Austenite Grain Sizes. 2021 International Conference on Advances in Metallurgy of Long and Forged Products. 2020
- 井上 忠信, 上路 林太郎. 日本刀型複合鋼板の組織と引張変形挙動. 第11回日本複合材料会議(JCCM-11). 2020
- 上路 林太郎. 鋼のオーステナイトの変形による組織変化と材料プロセシング. 日本金属学会 2020年春期第166回講演大会. 2020 招待講演
2019
- UEJI, Rintaro, INOUE, Tadanobu. Phase transformation behaviors in sandwich-like clad sheet composed of low and high carbon steels. Materials Scinece & Technology 19. 2019 招待講演
- 上路 林太郎, 井上 忠信. 日本刀型鋼板の組織と引張変形挙動. 第55回材料研究会発表会. 2019 招待講演
- 上路 林太郎, 井上 忠信. 高炭素鋼におけるパーライト変態に及ぼす圧縮応力の影響. 第178回秋季講演大会. 2019
- 上路 林太郎, 井上 忠信. 低炭素鋼と中炭素鋼からなる日本刀型複層鋼板におけるメゾスケール積層界面形態と引張変形挙動. 2019年度塑性加工春季講演会. 2019
- 井上 忠信, 上路 林太郎, 木村 勇次. 炭素鋼の強靭延性向上の方向性. 第68期通常総会・学術講演会. 2019
- 上路 林太郎, 井上 忠信. 低炭素鋼と中炭素鋼の積層構造におけるマルテンサイト組織生成の抑制. 第177回春季講演大会. 2019
2018
- 井上 忠信, 木村 勇次, 上路 林太郎. 低炭素鋼のミクロ組織制御による強靭化. 第56回高温強度シンポジウム. 2018
- 上路 林太郎. 合金鋼Ⅰ(高Mn鋼). 第158回塑性加工学講座. 2018 招待講演
2017
- 上路 林太郎, 井上 忠信. 日本刀型鋼板の組織と引張変形挙動. 第68回塑性加工連合講演会. 2017
- 上路 林太郎, 井上 忠信. 日本刀型鋼板の組織と引張変形挙動. 第68回塑性加工連合講演会. 2017
- 上路 林太郎, 井上 忠信. 日本刀型鋼板における層構成が及ぼす引張変形特性への影響. 材料化学研究会・鉄鋼プロセス研究会. 2017 招待講演
- 上路 林太郎. 高マンガンオーステナイト鋼の引張変形挙動と変形組織. 第173回春季講演大会. 2017 招待講演
- 上路 林太郎. 合金鋼II(TWIP鋼,Mn鋼). 第221回塑性加工技術セミナー「塑性加工屋にわかる材料知識−鉄系編. 2017 招待講演
2016
- 上路 林太郎, 藤井英俊, 森貞好昭, 孫 玉峰, 青木祥宏. 鋳鉄/炭素鋼圧接継手の接合界面における組織分布の制御. 平成28年度 秋季支部講演大会. 2016
その他の文献 TSV
2022
- 上路 林太郎, 邱 海, 井上 忠信. 鋼板の結晶方位のばらつきを利用した剛性と残留応力制御. 化学工業. 73 [2] (2022) 104-108
2016
- 上路 林太郎. オーステナイト鋼の塑性変形の面白さと我が研究の反省点. ふぇらむ. 21 [9] (2016) 526-530
公開特許出願 TSV
- 低Mn含有のTRIP鋼及びこれを用いた高強度鋼製加工品の製造方法 (2023)
- 鋼材の鍛造装置および鋼材の製造方法 (2021)
- 高靭性を有する鋼材及びその製造方法、この鋼材を用いた構造用鋼板 (2020)
- 高靭性を有する鋼材、及びその製造方法 (2018)