publication_type publication_year number author title journal_title volume_number issue_number start_page end_page doi reported_at
Paper 2024 1 Jiaxin Zhou, Ikumu Watanabe, Weikang Song, Keita Kambayashi, Ta-Te Chen Science and Technology of Advanced Materials: Methods 4 1 https://doi.org/10.1080/27660400.2024.2320691 2024-04-26 19:04:08 +0900
Paper 2024 2 Shinnosuke Yanagawa, Ikumu Watanabe ISIJ International 64 5 874 880 https://doi.org/10.2355/isijinternational.isijint-2023-470 2024-04-26 19:04:08 +0900
Paper 2024 3 柳川 真之裕, 渡邊 育夢 フェライト–パーライト複合組織鋼における降伏点現象のマルチスケール有限要素解析 鉄と鋼 110 3 333 341 https://doi.org/10.2355/tetsutohagane.tetsu-2023-080 2024-04-26 19:04:08 +0900
Paper 2024 4 Xiaoyang Zheng, Ikumu Watanabe, Siqian Wang, Ta-Te Chen, Masanobu Naito Materials & Design 237 112548 https://doi.org/10.1016/j.matdes.2023.112548 2024-04-26 19:04:08 +0900
Paper 2023 1 Hongxin Wang, Han Zhang, Ryo Tamura, Bo Da, Shimaa A. Abdellatef, Ikumu Watanabe, Nobuyuki Ishida, Daisuke Fujita, Nobutaka Hanagata, Tomoki Nakagawa, Jun Nakanishi Science and Technology of Advanced Materials 24 1 https://doi.org/10.1080/14686996.2023.2265434 2024-04-26 19:04:08 +0900
Paper 2023 2 Xiaoyang Zheng, Ta-Te Chen, Xiaoyu Jiang, Masanobu Naito, Ikumu Watanabe Science and Technology of Advanced Materials 24 1 https://doi.org/10.1080/14686996.2022.2157682 2024-04-26 19:04:08 +0900
Paper 2023 3 Takashi Matsuno, Taiki Fujita, Tomoko Matsuda, Yuki Shibayama, Tomohiko Hojo, Ikumu Watanabe Journal of Materials Processing Technology 322 118174 https://doi.org/10.1016/j.jmatprotec.2023.118174 2024-04-26 19:04:08 +0900
Paper 2023 4 Keita Kambayashi, Nozomu Kogiso, Ikumu Watanabe, Takayuki Yamada Structural and Multidisciplinary Optimization 66 10 https://doi.org/10.1007/s00158-023-03670-1 2024-04-26 19:04:08 +0900
Paper 2023 5 Xiaoyang Zheng, Xubo Zhang, Ta‐Te Chen, Ikumu Watanabe Deep Learning in Mechanical Metamaterials: From Prediction and Generation to Inverse Design Advanced Materials https://doi.org/10.1002/adma.202302530 2024-04-26 19:04:08 +0900
Paper 2022 1 Ta-Te Chen, Ikumu Watanabe Science and Technology of Advanced Materials: Methods 2 1 416 424 https://doi.org/10.1080/27660400.2022.2129508 2024-04-26 19:04:08 +0900
Paper 2022 2 Tatsuya Funazuka, Kuniaki Dohda, Tomomi Shiratori, Syunsuke Horiuchi, Ikumu Watanabe Micromachines 13 11 2001 https://doi.org/10.3390/mi13112001 2024-04-26 19:04:08 +0900
Paper 2022 3 Wei-Hsun Hu, Ta-Te Chen, Ryo Tamura, Kei Terayama, Siqian Wang, Ikumu Watanabe, Masanobu Naito Science and Technology of Advanced Materials 23 1 66 75 https://doi.org/10.1080/14686996.2021.2025426 2024-04-26 19:04:08 +0900
Paper 2022 4 Xiaoyang Zheng, Koichiro Uto, Wei-Hsun Hu, Ta-Te Chen, Masanobu Naito, Ikumu Watanabe Applied Materials Today 29 101662 https://doi.org/10.1016/j.apmt.2022.101662 2024-04-26 19:04:08 +0900
Paper 2022 5 Jiaxin Zhou, Ikumu Watanabe, Takayuki Yamada Composite Structures 302 116200 https://doi.org/10.1016/j.compstruct.2022.116200 2024-04-26 19:04:08 +0900
Paper 2022 6 Kenta Goto, Kimiyoshi Naito, Keiichi Shirasu, Ikumu Watanabe SN Applied Sciences 4 11 https://doi.org/10.1007/s42452-022-05183-w 2024-04-26 19:04:08 +0900
Paper 2022 7 Ikumu Watanabe, Ta-Te Chen, Sachiko Taniguchi, Houichi Kitano Materials Characterization 191 112159 https://doi.org/10.1016/j.matchar.2022.112159 2024-04-26 19:04:08 +0900
Paper 2022 8 Kenta Goto, Ayako Ikeda, Toshio Osada, Ikumu Watanabe, Kyoko Kawagishi, Takahito Ohmura High-throughput evaluation of stress–strain relationships in Ni–Co–Cr ternary systems via indentation testing of diffusion couples Journal of Alloys and Compounds 910 164868 https://doi.org/10.1016/j.jallcom.2022.164868 2024-04-26 19:04:08 +0900
Paper 2022 9 Ikumu Watanabe, Toshiro Amaishi Three-dimensional finite element analysis of unintended deformation of polycrystalline billet in micro-extrusion The International Journal of Advanced Manufacturing Technology 120 1-2 817 827 https://doi.org/10.1007/s00170-022-08726-y 2024-04-26 19:04:08 +0900
Paper 2022 10 Wei‐Hsun Hu, Ming Ji, Ta‐Te Chen, Siqian Wang, Mizuki Tenjimbayashi, Yu Sekiguchi, Ikumu Watanabe, Chiaki Sato, Masanobu Naito Small 18 14 2107078 https://doi.org/10.1002/smll.202107078 2024-04-26 19:04:08 +0900
Paper 2021 1 Reon Ando, Takashi Matsuno, Tomoko Matsuda, Norio Yamashita, Hideo Yokota, Kenta Goto, Ikumu Watanabe Analysis of Nano-hardness Distribution Near the Ferrite-martensite Interface in a Dual Phase Steel with Factorization of Its Scattering Behavior ISIJ International 61 1 473 480 https://doi.org/10.2355/isijinternational.isijint-2020-546 2024-04-26 19:04:08 +0900
Paper 2021 2 Xiaoyang Zheng, Ta-Te Chen, Xiaofeng Guo, Sadaki Samitsu, Ikumu Watanabe Controllable inverse design of auxetic metamaterials using deep learning Materials & Design 211 110178 https://doi.org/10.1016/j.matdes.2021.110178 2024-04-26 19:04:08 +0900
Paper 2021 3 Ta-Te Chen, Ikumu Watanabe, Tatsuya Funazuka Characterization of the Strain-Rate-Dependent Plasticity of Alloys Using Instrumented Indentation Tests Crystals 11 11 1316 https://doi.org/10.3390/cryst11111316 2024-04-26 19:04:08 +0900
Paper 2021 4 Tatsuya Funazuka, Kuniaki Dohda, Tomomi Shiratori, Ryo Hiramiya, Ikumu Watanabe Effect of Punch Surface Grooves on Microformability of AA6063 Backward Microextrusion Micromachines 12 11 1299 https://doi.org/10.3390/mi12111299 2024-04-26 19:04:08 +0900
Paper 2021 5 Wei Hsun Hu, Mizuki Tenjimbayashi, Siqian Wang, Yasuyuki Nakamura, Ikumu Watanabe, Masanobu Naito Postprogrammable Network Topology with Broad Gradients of Mechanical Properties for Reliable Polymer Material Engineering Chemistry of Materials 33 17 6876 6884 https://doi.org/10.1021/acs.chemmater.1c01715 2024-04-26 19:04:08 +0900
Paper 2021 6 Takao Tsumuraya, Ikumu Watanabe, Takahiro Sawaguchi "Origin of phase stability in Fe with long-period stacking order as an intermediate phase in cyclic
γ−ε
martensitic transformation" Physical Review Research 3 3 https://doi.org/10.1103/physrevresearch.3.033215 2024-04-26 19:04:08 +0900
Paper 2021 7 Jovana Ruzic, Kenta Goto, Ikumu Watanabe, Toshio Osada, Liberty Wu, Takahito Ohmura Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys Materials Science and Engineering: A 818 141439 https://doi.org/10.1016/j.msea.2021.141439 2024-04-26 19:04:08 +0900
Paper 2021 8 Ayako Ikeda, Kenta Goto, Toshio Osada, Ikumu Watanabe, Kyoko Kawagishi High-throughput mapping method for mechanical properties, oxidation resistance, and phase stability in Ni-based superalloys using composition-graded unidirectional solidified alloys Scripta Materialia 193 91 96 https://doi.org/10.1016/j.scriptamat.2020.10.043 2024-04-26 19:04:08 +0900
Paper 2021 9 Edison A. Bonifaz, Ikumu Watanabe Anisotropic Multiscale Modelling in SAE-AISI 1524 Gas Tungsten Arc Welded Joints Crystals 11 3 245 https://doi.org/10.3390/cryst11030245 2024-04-26 19:04:08 +0900
Paper 2021 10 Hongxin Wang, Han Zhang, Bo Da, Dabao Lu, Ryo Tamura, Kenta Goto, Ikumu Watanabe, Daisuke Fujita, Nobutaka Hanagata, Junko Kano, Tomoki Nakagawa, Masayuki Noguchi Mechanomics Biomarker for Cancer Cells Unidentifiable through Morphology and Elastic Modulus Nano Letters 21 3 1538 1545 https://doi.org/10.1021/acs.nanolett.1c00003 2024-04-26 19:04:08 +0900
Paper 2021 11 Takashi Matsuno, Tomohiko Hojo, Ikumu Watanabe, Ayumi Shiro, Takahisa Shobu, Kentaro Kajiwara Tensile deformation behavior of TRIP-aided bainitic ferrite steel in the post-necking strain region Science and Technology of Advanced Materials: Methods 1 1 56 74 https://doi.org/10.1080/27660400.2021.1922207 2024-04-26 19:04:08 +0900
Paper 2021 12 Ta-Te Chen, Ikumu Watanabe, Dayuan Liu, Kenta Goto Data-driven estimation of plastic properties of alloys using neighboring indentation test Science and Technology of Advanced Materials: Methods 1 1 143 151 https://doi.org/10.1080/27660400.2021.1959838 2024-04-26 19:04:08 +0900
Paper 2021 13 Xiaoyang Zheng, Xiaofeng Guo, Ikumu Watanabe A mathematically defined 3D auxetic metamaterial with tunable mechanical and conduction properties Materials & Design 198 109313 https://doi.org/10.1016/j.matdes.2020.109313 2024-04-26 19:04:08 +0900
Paper 2021 14 L. Wu, T. Osada, I. Watanabe, T. Yokokawa, T. Kobayashi, K. Kawagishi Strength prediction of Ni-base disc superalloys: Modified γ′ hardening models applicable to commercial alloys Materials Science and Engineering: A 799 140103 https://doi.org/10.1016/j.msea.2020.140103 2024-04-26 19:04:08 +0900
Paper 2020 1 渡邊 育夢 数学的均質化法に基づくミクロ-マクロスケール連成有限要素解析 トライボロジスト 659 664 https://doi.org/10.18914/tribologist.65.11_659 2024-04-26 19:04:08 +0900
Paper 2020 2 安藤 玲音, 松野 崇, 松田 知子, 山下 典理男, 横田 秀夫, 後藤 健太, 渡邊 育夢 Dual Phase鋼におけるフェライト・マルテンサイト界面近傍のナノ硬さ分布とそのバラつき因子 鉄と鋼 106 12 944 952 https://doi.org/10.2355/tetsutohagane.tetsu-2020-037 2024-04-26 19:04:08 +0900
Paper 2020 3 Kohta Koenuma, Akinori Yamanaka, Ikumu Watanabe, Toshihiko Kuwabara Estimation of Texture-Dependent Stress-Strain Curve and r-Value of Aluminum Alloy Sheet Using Deep Learning MATERIALS TRANSACTIONS 61 12 2276 2283 https://doi.org/10.2320/matertrans.p-m2020853 2024-04-26 19:04:08 +0900
Paper 2020 4 肥沼 康太, 山中 晃徳, 渡邊 育夢, 桑原 利彦 深層学習を用いたアルミニウム合金板の集合組織に依存した応力－ひずみ曲線とr値の推定 塑性と加工 61 709 48 55 https://doi.org/10.9773/sosei.61.48 2024-04-26 19:04:08 +0900
Paper 2020 5 Akinori Yamanaka, Ryunosuke Kamijyo, Kohta Koenuma, Ikumu Watanabe, Toshihiko Kuwabara Deep neural network approach to estimate biaxial stress-strain curves of sheet metals Materials & Design 195 108970 https://doi.org/10.1016/j.matdes.2020.108970 2024-04-26 19:04:08 +0900
Paper 2020 6 Kenta Goto, Ikumu Watanabe, Takahito Ohmura Inverse estimation approach for elastoplastic properties using the load-displacement curve and pile-up topography of a single Berkovich indentation Materials & Design 194 108925 https://doi.org/10.1016/j.matdes.2020.108925 2024-04-26 19:04:08 +0900
Paper 2020 7 L. Wu, T. Osada, I. Watanabe, T. Yokokawa, T. Kobayashi, K. Kawagishi A New Approach to Strength Prediction of Ni-Base Disk Superalloys with Dual-Phase γ/γ′ Minerals, Metals and Materials Series 651 658 https://doi.org/10.1007/978-3-030-51834-9_63 2024-04-26 19:04:08 +0900
Paper 2020 8 Takashi Matsuno, Reon Ando, Norio Yamashita, Hideo Yokota, Kenta Goto, Ikumu Watanabe Analysis of preliminary local hardening close to the ferrite–martensite interface in dual-phase steel by a combination of finite element simulation and nanoindentation test International Journal of Mechanical Sciences 180 105663 https://doi.org/10.1016/j.ijmecsci.2020.105663 2024-04-26 19:04:08 +0900
Paper 2020 9 Ikumu Watanabe, Zhengzhong Sun, Houichi Kitano, Kenta Goto Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing Science and Technology of Advanced Materials 21 1 461 470 https://doi.org/10.1080/14686996.2020.1788908 2024-04-26 19:04:08 +0900
Paper 2020 10 Hongxin Wang, Han Zhang, Kenta Goto, Ikumu Watanabe, Hideaki Kitazawa, Masamichi Kawai, Hiroaki Mamiya, Daisuke Fujita Stress mapping reveals extrinsic toughening of brittle carbon fiber in polymer matrix Science and Technology of Advanced Materials 21 1 267 277 https://doi.org/10.1080/14686996.2020.1752114 2024-04-26 19:04:08 +0900
Paper 2019 1 Jovana Ruzic, Ikumu Watanabe, Kenta Goto, Takahito Ohmura Nano-Indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere MATERIALS TRANSACTIONS 60 8 1411 1415 https://doi.org/10.2320/matertrans.md201909 2024-04-26 19:04:08 +0900
Paper 2019 2 Hongxin Wang, Han Zhang, Daiming Tang, Kenta Goto, Ikumu Watanabe, Hideaki Kitazawa, Masamichi Kawai, Hiroaki Mamiya, Daisuke Fujita Stress dependence of indentation modulus for carbon fiber in polymer composite Science and Technology of Advanced Materials 20 1 412 420 https://doi.org/10.1080/14686996.2019.1600202 2024-04-26 19:04:08 +0900
Paper 2019 3 Takashi Matsuno, Tomoya Yoshioka, Ikumu Watanabe, Luis Alves Three-dimensional finite element analysis of representative volume elements for characterizing the effects of martensite elongation and banding on tensile strength of ferrite-martensite dual-phase steels International Journal of Mechanical Sciences 163 105133 https://doi.org/10.1016/j.ijmecsci.2019.105133 2024-04-26 19:04:08 +0900
Paper 2019 4 Kenta Goto, Ikumu Watanabe, Takahito Ohmura Determining suitable parameters for inverse estimation of plastic properties based on indentation marks International Journal of Plasticity 116 81 90 https://doi.org/10.1016/j.ijplas.2018.12.007 2024-04-26 19:04:08 +0900
Paper 2019 5 Ikumu Watanabe, Akinori Yamanaka Voxel coarsening approach on image-based finite element modeling of representative volume element International Journal of Mechanical Sciences 150 314 321 https://doi.org/10.1016/j.ijmecsci.2018.10.028 2024-04-26 19:04:08 +0900
Paper 2018 1 Takeshi Onishi, Takuya Kadohira, Ikumu Watanabe Science and Technology of Advanced Materials 19 1 649 659 https://doi.org/10.1080/14686996.2018.1500852 2024-04-26 19:04:08 +0900
Paper 2018 2 Hiromi Kondo, Masato Wakeda, Ikumu Watanabe Atomic study on the interaction between superlattice screw dislocation and γ-Ni precipitate in γ′-Ni3Al intermetallics Intermetallics 102 1 5 https://doi.org/10.1016/j.intermet.2018.08.008 2024-04-26 19:04:08 +0900
Paper 2018 3 Jovana Ruzic, Satoshi Emura, Xin Ji, Ikumu Watanabe Mo segregation and distribution in Ti–Mo alloy investigated using nanoindentation Materials Science and Engineering: A 718 48 55 https://doi.org/10.1016/j.msea.2018.01.098 2024-04-26 19:04:08 +0900
Paper 2017 1 Asriana IBRAHIM, Kazuyuki NAKAHATA, Hisashi YAMAWAKI, Ikumu WATANABE One dimensional EFIT modeling and experimental validation of dynamic interfacial bonding Mechanical Engineering Letters 3 0 16 00605 https://doi.org/10.1299/mel.16-00605 2024-04-26 19:04:08 +0900
Paper 2016 1 Vinicius Aguiar de Souza, Ikumu Watanabe, Akira Yanagida Numerical Estimation of Frictional Effects in Equal Channel Angular Extrusion MATERIALS TRANSACTIONS 57 9 1399 1403 https://doi.org/10.2320/matertrans.mh201513 2024-04-26 19:04:08 +0900
Paper 2016 2 Ikumu Watanabe, Daigo Setoyama Multiscale characterization of a polycrystalline aggregate subjected to severe plastic deformation with the finite element method MATERIALS TRANSACTIONS 57 9 1404 1410 https://doi.org/10.2320/matertrans.mh201514 2024-04-26 19:04:08 +0900
Paper 2016 3 Sanjay Kumar Vajpai, Han Yu, Mie Ota, Ikumu Watanabe, Guy Dirras, Kei Ameyama Three-Dimensionally Gradient and Periodic Harmonic Structure for High Performance Advanced Structural Materials MATERIALS TRANSACTIONS 57 9 1424 1432 https://doi.org/10.2320/matertrans.mh201509 2024-04-26 19:04:08 +0900
Paper 2015 1 S. Bidhar, O. Kuwazuru, Y. Shiihara, T. Utsunomiya, Y. Hangai, M. Nomura, I. Watanabe, N. Yoshikawa Empirical Formulation of Stress Concentration Factor around an Arbitrary-Sized Spherical Dual- Cavity System and its Application to Aluminum Die Castings Applied Mathematical Modelling 39 18 5707 5723 https://doi.org/10.1016/j.apm.2015.01.032 2024-04-26 19:04:08 +0900
Paper 2015 2 渡邊 育夢 連続体力学に基づく延性破壊の数値解析手法 鉄と鋼 101 9 465 470 https://doi.org/10.2355/tetsutohagane.tetsu-2015-022 2024-04-26 19:04:08 +0900
Paper 2015 3 渡邊育夢 From Creep Damage Mechanics to Homogenization Methods Advanced Material Modelling: From Creep Damage Mechanics to Homogenization Methods 24 "" 541 555 https://doi.org/10.1007/978-3-319-19440-0 2024-04-26 19:04:08 +0900
Paper 2015 4 Sujit Bidhar, Osamu Kuwazuru, Yoshinori Shiihara, Yoshihiko Hangai, Takao Utsunomiya, Ikumu Watanabe, Nobuhiro Yoshikawa Practical application of empirical formulation of the stress concentration factor around equally sized dual spherical cavities to aluminum die cast Applied Mathematical Modelling 39 2 881 893 https://doi.org/10.1016/j.apm.2014.07.005 2024-04-26 19:04:08 +0900
Paper 2014 1 渡邊 育夢, 岩田 徳利 降伏点現象の有限ひずみ弾塑性構成モデリング 鉄と鋼 100 10 1232 1237 https://doi.org/10.2355/tetsutohagane.100.1232 2024-04-26 19:04:08 +0900
Paper 2014 2 IWATA Noritoshi, WATANABE, Ikumu, SETOYAMA Daigo, IWATA Takamichi Computational prediction of macroscopic mechanical behavior in multi-constituent steels R&D Review of TOYOTA CRDL 45 4 1 10 2024-04-26 19:04:08 +0900
Paper 2014 3 渡邊 育夢 構造材料のマルチスケール有限要素モデリング ふぇらむ 19 11 814 819 2024-04-26 19:04:08 +0900
Paper 2014 4 Mayu Muramatsu, Motomichi Koyama, Ikumu Watanabe Tensile Testing with Cyclic Strain Holding to Analyze Dynamic Recrystallization of Pure Lead Advances in Materials Science and Engineering 2014 1 8 https://doi.org/10.1155/2014/498674 2024-04-26 19:04:08 +0900
Paper 2013 1 堤 成一郎, 大和 真征, 後藤 浩二, 渡邊 育夢, Dunne Fionn 結晶塑性FE 解析による巨視的弾性応力下の繰返し軟化挙動の考察 Journal of Smart Processing 2 3 123 127 https://doi.org/10.7791/jspmee.2.123 2024-04-26 19:04:08 +0900
Paper 2013 2 Vinicius Aguiar de Souza, Levent Kirkayak, Ikumu Watanabe, Katsuyuki Suzuki, Hideyuki Ando, Hidetoshi Sueoka, Huseyin Darama Experimental and numerical analysis of container multiple stacks dynamics using a scaled model Ocean Engineering 74 218 232 https://doi.org/10.1016/j.oceaneng.2013.05.013 2024-04-26 19:04:08 +0900
Paper 2013 3 渡邊 育夢, 細川 明秀, 堤成一郎 有限要素解析による複合組織鋼の力学挙動評価 スマートプロセス学会誌 2 3 119 122 2024-04-26 19:04:08 +0900
Paper 2012 1 瀬戸山 大吾, 渡邊 育夢, 岩田 徳利 フェライト-パーライト複合組織鋼の組織形態と力学特性に関する実験と数値解析の比較研究 鉄と鋼 98 290 295 https://doi.org/10.2355/tetsutohagane.98.290 2024-04-26 19:04:08 +0900
Paper 2012 2 渡邊 育夢, 上路 林太郎 複合組織鋼の非均質組織に基づく力学挙動モデリング手法 鉄と鋼 98 283 289 https://doi.org/10.2355/tetsutohagane.98.283 2024-04-26 19:04:08 +0900
Paper 2012 3 上路林太郎, 国重和俊, 渡邊 育夢 複合組織鋼のモデリング手法の基本的な考え方と適用例 鉄鋼材料の加工硬化特性への新たな要求と基礎研究(改訂版) "" "" 205 209 2024-04-26 19:04:08 +0900
Paper 2012 4 I. Watanabe, D. Setoyama, N. Nagasako, N. Iwata, K. Nakanishi Ferrite-Pearlite複合組織鋼のマルチスケール解析 International Journal for Numerical Methods in Engineering 89 7 829 845 https://doi.org/10.1002/nme.3264 2024-04-26 19:04:08 +0900
Paper 2011 1 上路林太郎, 国重和俊, 渡邊 育夢 複合組織鋼のモデリング手法の基本的な考え方と適用例 鉄銅材料の加工硬化特性への新たな要求と基礎研究 "" "" 205 209 2024-04-26 19:04:08 +0900
Paper 2010 1 渡邊 育夢, 寺田 賢二郎 ミクロ-マクロ非連成解析による多結晶金属の加工後降伏強度の評価手法 日本機械学会論文集Ａ編 76 766 752 760 https://doi.org/10.1299/kikaia.76.752 2024-04-26 19:04:08 +0900
Paper 2010 2 渡邊 育夢, 岩田徳利, 中西広吉 テンソル内部変数を持つ有限ひずみ弾塑性構成モデルの定式化 TRANSACTIONS OF JSCES(日本計算工学会論文集) 2010 20100005 1 6 2024-04-26 19:04:08 +0900
Paper 2010 3 Ikumu Watanabe, Daigo Setoyama, Noritoshi Iwata, Koukichi Nakanishi 代表特性長さに基づく結晶塑性構成モデルを用いた多結晶金属の降伏挙動の評価 International Journal of Plasticity 26 4 570 585 https://doi.org/10.1016/j.ijplas.2009.09.005 2024-04-26 19:04:08 +0900
Paper 2010 4 I. Watanabe, K. Terada 多結晶金属のミクロ-マクロ非連成解析による塑性加工後のマクロ降伏強度の予測 International Journal of Mechanical Sciences 52 2 343 355 https://doi.org/10.1016/j.ijmecsci.2009.10.006 2024-04-26 19:04:08 +0900