publication_type publication_year number author title journal_title volume_number issue_number start_page end_page doi reported_at Paper 2024 1 尾関郷, 横堀壽光, 田淵 正明, 大見敏仁, 堀川純, 渡部将平 ひずみ制御負荷条件における切欠き材の応力応答におよぼす評点間距離の効果 Journal of the Japanese Society for Strength and Fracture of Materials 57 3-4 36 40 2024-04-19 04:22:29 +0900 Paper 2024 2 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Sae Matsunaga, Yoko Yamabe-Mitarai NA MATERIALS TRANSACTIONS 65 2 237 241 https://doi.org/10.2320/matertrans.mt-m2023147 2024-04-19 04:22:29 +0900 Paper 2023 1 松永 哲也, 本郷 宏通, 山﨑 政義, 田淵 正明 316FRステンレス鋼溶接継手の16Cr-8Ni-2MoおよびMod.316溶接金属のクリープ変形 鉄と鋼 109 7 605 612 https://doi.org/10.2355/tetsutohagane.tetsu-2022-128 2024-04-19 04:22:29 +0900 Paper 2023 2 Go Ozeki, Toshimitsu A. Yokobori, Masaaki Tabuchi, Masao Hayakawa, Kamran Nikbin NA ASTM special technical publication 42 62 https://doi.org/10.1520/stp164320210094 2024-04-19 04:22:29 +0900 Paper 2023 3 Toshihiro Ohtani, Yutaka Ishii, Masaaki Tabuchi, Hiromichi Hongo, Kota Sawada Materials Characterization 197 112657 https://doi.org/10.1016/j.matchar.2023.112657 2024-04-19 04:22:29 +0900 Paper 2022 1 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Yoko Yamabe-Mitarai Double Steady-State Creep Behavior in Solid-Solute-Strengthened Zircaloy-4 MATERIALS TRANSACTIONS 63 2 157 162 https://doi.org/10.2320/matertrans.mt-m2021183 2024-04-19 04:22:29 +0900 Paper 2021 1 Hitoshi Izuno, Masahiko Demura, Masayoshi Yamazaki, Masaaki Tabuchi, Daisuke Abe, Keisuke Torigata Damage Model Determination for Predicting Creep Rupture Time of 2 1/4Cr–1Mo Steel Weld Joints MATERIALS TRANSACTIONS 62 7 1013 1022 https://doi.org/10.2320/matertrans.mt-ma2020004 2024-04-19 04:22:29 +0900 Paper 2021 2 Fujio Abe, Masaaki Tabuchi, Susumu Tsukamoto Alloy Design of MARBN for Boiler and Turbine Applications at 650 oC Materials at High Temperatures 38 5 306 321 https://doi.org/10.1080/09603409.2021.1963393 2024-04-19 04:22:29 +0900 Paper 2020 1 村上幸太郎, 駒崎慎一, 田淵 正明, 本郷 宏通 水素昇温脱離分析法によるボイラー配管溶接継手部のクリープ損傷評価 Journal of Japan Boiler Association 419 ２月号 11 16 2024-04-19 04:22:29 +0900 Paper 2020 2 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Yoko Yamabe-Mitarai Creep Lifetime Reduction in Heat Affected Zone in Boron-Added 9Cr Heat Resistant Steel ISIJ International 60 6 1342 1348 https://doi.org/10.2355/isijinternational.isijint-2019-634 2024-04-19 04:22:29 +0900 Paper 2020 3 M. Souissi, M.H.F. Sluiter, T. Matsunaga, M. Tabuchi, M.J. Mills, R. Sahara Direct observation and modeling of growth-induced stacking fault in chromium-rich γ-M23C6 carbides Scripta Materialia 178 290 294 https://doi.org/10.1016/j.scriptamat.2019.11.050 2024-04-19 04:22:29 +0900 Paper 2020 4 Hitoshi Izuno, Masahiko Demura, Masaaki Tabuchi, Yoh-ichi Mototake, Masato Okada Data-based selection of creep constitutive models for high-Cr heat-resistant steel Science and Technology of Advanced Materials 21 1 219 228 https://doi.org/10.1080/14686996.2020.1738268 2024-04-19 04:22:29 +0900 Paper 2019 1 鶴田 秀樹, 戸田 裕之, 弥富 政享, 吉田 公亮, 竹内 晃久, 上椙 真之, 田淵 正明, 本郷 宏通 X線マイクロトモグラフィによる改良9Cr-1Mo鋼溶接部におけるクリープボイドの定量評価 材料 68 8 599 606 https://doi.org/10.2472/jsms.68.599 2024-04-19 04:22:29 +0900 Paper 2019 2 Kozo Koiwa, Masaaki Tabuchi, Masahiko Demura, Masayoshi Yamazaki, Makoto Watanabe Prediction of Creep Rupture Time Using Constitutive Laws and Damage Rules in 9Cr–1Mo–V–Nb Steel Welds MATERIALS TRANSACTIONS 60 2 213 221 https://doi.org/10.2320/matertrans.me201703 2024-04-19 04:22:29 +0900 Paper 2019 3 駒崎 慎一, 塚元 崇博, 宮田 圭佑, 田淵 正明, 本郷 宏通 高Crフェライト系耐熱鋼溶接継手部のクリープに伴う水素放出特性の変化 材料 68 2 106 113 https://doi.org/10.2472/jsms.68.106 2024-04-19 04:22:29 +0900 Paper 2019 4 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi Creep Behavior in Pure Magnesium at Room Temperature MATERIALS TRANSACTIONS 60 6 975 979 https://doi.org/10.2320/matertrans.m2018334 2024-04-19 04:22:29 +0900 Paper 2019 5 Fujio Abe, Toshio Ohba, Hideko Miyazaki, Yoshiaki Toda, Masaaki Tabuchi Effect of W–Mo balance on long-term creep life of 9Cr steel Materials at High Temperatures 36 4 314 324 https://doi.org/10.1080/09603409.2018.1555202 2024-04-19 04:22:29 +0900 Paper 2019 6 Fujio Abe, Toshio Ohba, Hideko Miyazaki, Yoshiaki Toda, Masaaki Tabuchi Effect of W-Mo balance and boron nitrides on creep rupture ductility of 9Cr steel Materials at High Temperatures 36 4 368 378 https://doi.org/10.1080/09603409.2019.1574369 2024-04-19 04:22:29 +0900 Paper 2019 7 Y. Liu, S. Tsukamoto, H. Hongo, F. Yin, M. Tabuchi, F. Abe NA Metallurgical and Materials Transactions A 50 7 3080 3090 https://doi.org/10.1007/s11661-019-05245-6 2024-04-19 04:22:29 +0900 Paper 2019 8 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Maaouia Souissi, Ryoji Sahara, Collin Whitt, Wei Zhang, M.J. Mills Creep lifetime and microstructure evolution in boron-added 9Cr–1Mo heat-resistant steel Materials Science and Engineering: A 760 267 276 https://doi.org/10.1016/j.msea.2019.05.114 2024-04-19 04:22:29 +0900 Paper 2018 1 A. Toshimitsu Yokobori, Jr, Ryuji Sugiura, Kazuto Sato, Haruhisa Shigeyama, Masaaki Tabuchi The effect of vacancy diffusion and concentration on creep crack initiation in weldment of a C(T) specimen for high Cr steel Strength, Fracture and Complexity 11 2-3 107 120 https://doi.org/10.3233/sfc-180217 2024-04-19 04:22:29 +0900 Paper 2018 2 Tetsuya Matsunaga, Maaouia Souissi, Ryoji Sahara, Hiromichi Hongo, Masaaki Tabuchi, Wei Zhang, Michael J. Mills Creep Property of Boron Added 9Cr Heat Resistant Steels after Welding Materials Science Forum 941 340 345 https://doi.org/10.4028/www.scientific.net/msf.941.340 2024-04-19 04:22:29 +0900 Paper 2018 3 Maaouia Souissi, Marcel H. F. Sluiter, Tetsuya Matsunaga, Masaaki Tabuchi, Michael J. Mills, Ryoji Sahara Effect of mixed partial occupation of metal sites on the phase stability of γ-Cr23−xFexC6 (x = 0–3) carbides Scientific Reports 8 1 https://doi.org/10.1038/s41598-018-25642-y 2024-04-19 04:22:29 +0900 Paper 2018 4 茂山治久, 横堀壽光, 杉浦隆次, 佐藤和人, 田淵 正明 高Cr鋼溶接切り欠き材のクリープき裂発生・成長に及ぼす空孔拡散凝集挙動の効果 JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS 51 4 67 72 2024-04-19 04:22:29 +0900 Paper 2017 1 松永 哲也, 本郷 宏通, 田淵 正明 高温クリープ環境下におけるNi基溶接金属の延性低下 材料 66 2 138 141 https://doi.org/10.2472/jsms.66.138 2024-04-19 04:22:29 +0900 Paper 2017 2 Masaaki Tabuchi, Hiromichi Hongo, Tetsuya Matsunaga Long-term creep strength and fracture of Gr.91 steel welds Materials at High Temperatures 34 5-6 466 472 https://doi.org/10.1080/09603409.2017.1378974 2024-04-19 04:22:29 +0900 Paper 2017 3 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi Interfacial Failure in Dissimilar Weld Joint of High Boron 9% Chromium Steel and Nickel-Based Alloy under high-temperature creep condition Materials Science and Engineering: A 695 302 308 https://doi.org/10.1016/j.msea.2017.04.012 2024-04-19 04:22:29 +0900 Paper 2017 4 大谷 俊博, 本間 匠, 石井 優, 田淵 正明, 本郷 宏通, 平尾 雅彦 ASME Gr.91鋼溶接継手のクリープ損傷中の非線形超音波特性の変化 材料 66 2 114 121 https://doi.org/10.2472/jsms.66.114 2024-04-19 04:22:29 +0900 Paper 2017 5 本郷 宏通, 田淵 正明, 松永 哲也 Gr.91鋼溶接継手の長時間クリープ強度と破壊 JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS 50 2 25 34 2024-04-19 04:22:29 +0900 Paper 2017 6 Fujio Abe, M. Tabuchi, M. Hayakawa Influence of data scattering on estimation of 100,000 hrs creep rupture strength of Alloy 617 at 700 oC by Larson-Miller method Journal of Pressure Vessel Technology 139 1 011403 https://doi.org/10.1115/1.4033290 2024-04-19 04:22:29 +0900 Paper 2017 7 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Yuhki Satoh, Hiroaki Abe Transition of creep mechanism by solute hydrogen in Zircaloy-4 Materials Science and Engineering: A 684 191 195 https://doi.org/10.1016/j.msea.2016.12.057 2024-04-19 04:22:29 +0900 Paper 2016 1 松永 哲也, 本郷 宏通, 田淵 正明 高温クリープ下でのジルカロイ4の2段定常クリープ挙動 材料 65 10 695 699 https://doi.org/10.2472/jsms.65.695 2024-04-19 04:22:29 +0900 Paper 2016 2 Ryoji Sahara, Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi Theoretical Investigation of Stabilizing Mechanism by Boron in Body-Centered Cubic Iron Through (Fe,Cr)23(C,B)6 Precipitates Metallurgical and Materials Transactions A 47 5 2487 2497 https://doi.org/10.1007/s11661-016-3397-7 2024-04-19 04:22:29 +0900 Paper 2016 3 横堀壽光, 白井雄介, 安藤明香里, 陣野和貴, 茂山冶久, 杉浦隆次, 田淵 正明, 小林謙一, 弥富政享, Kamran Nikbin Q*コンセプトによる溶接材を含むP91鋼およびP92鋼予き裂材のクリープき裂成長開始条件の特定 JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS(日本材料強度学会誌) 49 4 61 68 2024-04-19 04:22:29 +0900 Paper 2016 4 Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Ryoji Sahara Suppression of grain refinement in heat-affected zone of 9Cr-3W-3Co-VNb steels Materials Science and Engineering: A 655 168 174 https://doi.org/10.1016/j.msea.2015.12.095 2024-04-19 04:22:29 +0900 Paper 2015 1 田淵 正明 クリープ疲労き裂進展試験 －高温破壊試験法の標準化－ 材料 64 11 960 966 https://doi.org/10.2472/jsms.64.960 2024-04-19 04:22:29 +0900 Paper 2015 2 T. Matsunaga, H. Somekawa, H. Hongo, M. Tabuchi 室温におけるAZ31マグネシウム合金のひずみ速度に依存した変形機構の変遷 Materials Science and Engineering: A 647 212 215 https://doi.org/10.1016/j.msea.2015.09.029 2024-04-19 04:22:29 +0900 Paper 2015 3 田淵 正明 耐熱鋼溶接部のクリープ損傷と破壊に関する研究 ふぇらむ 20 7 327 330 2024-04-19 04:22:29 +0900 Paper 2015 4 横堀壽光, 南雲佳子, 矢島誉大, 飛田洋佑, 田淵 正明 計算力学支援法によるクリープ定数の特定および切欠き材のクリープ寿命則の予測 JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS 49 1 1 11 2024-04-19 04:22:29 +0900 Paper 2015 5 M. Tabuchi, H. Hongo, R. Sugiura, A.T. Yokobori, M. Yatomi, K. Kobayashi, A. Saxena, K. Nikbin, A.T. Yokobori 高温における高クロム鋼の損傷と破壊の評価 Strength, Fracture and Complexity 9 1 31 41 https://doi.org/10.3233/sfc-150177 2024-04-19 04:22:29 +0900 Paper 2015 6 Yuan Liu, Susumu Tsukamoto, Kota Sawada, Masaaki Tabuchi, Fujio Abe Precipitation behaviour in Ac3 HAZ simulated B steel during PWHT and creep deformation Metallurgical and Materials Transactions A 46 5 1843 1854 https://doi.org/10.1007/s11661-015-2802-y 2024-04-19 04:22:29 +0900 Paper 2015 7 K. Sawada, T. Hara, M. Tabuchi, K. Kimura, K. Kubushiro Microstructure characterization of heat affected zone after welding in Mod.9Cr-1Mo steel Materials Characterization 101 106 113 https://doi.org/10.1016/j.matchar.2015.01.013 2024-04-19 04:22:29 +0900 Paper 2015 8 大谷 俊博, 本間 匠, 石井 優, 田淵 正明, 本郷 宏通, 平尾 雅彦 Gr.122鋼溶接継手のクリープ損傷中の非線形音響特性と微細組織の変化 材料 64 2 80 87 https://doi.org/10.2472/jsms.64.80 2024-04-19 04:22:29 +0900 Paper 2014 1 大谷俊博, 田淵 正明, 澤田 浩太, 本郷 宏通 非線形超音波法を用いたボイラー用耐熱鋼のクリープ損傷評価の研究 ボイラ研究 388 "" 25 30 2024-04-19 04:22:29 +0900 Paper 2014 2 Masaaki Tabuchi, Hiromichi Hongo, Fujio Abe 先進超々臨界圧ボイラ用高B-9Cr鋼を用いた異材溶接継手のクリープ強度 Metallurgical and Materials Transactions A 45 11 5068 5075 https://doi.org/10.1007/s11661-014-2471-2 2024-04-19 04:22:29 +0900 Paper 2014 3 Ryuji Sugiura 高クロム鋼の溶接部におけるクリープき裂の発生、成長挙動 Strength, Fracture and Complexity 8 2 125 133 https://doi.org/10.3233/sfc-140163 2024-04-19 04:22:29 +0900 Paper 2014 4 阿部 冨士雄, 田淵 正明, 塚本 進 火力発電用高クロムフェライト鋼 －溶接継手のクリープ強度劣化の克服－ 金属 （アグネ技術センター） 84 6 465 473 2024-04-19 04:22:29 +0900 Paper 2014 5 K. Sawada, H. Kushima, T. Hara, M. Tabuchi, K. Kimura Heat-to-heat variation of creep strength and long-term stability of microstructure in Grade 91 steels Materials Science and Engineering: A 597 164 170 https://doi.org/10.1016/j.msea.2013.12.088 2024-04-19 04:22:29 +0900 Paper 2014 6 Thuy Dang Nguyen, Kota Sawada, Hideaki Kushima, Masaaki Tabuchi, Kazuhiro Kimura Change of precipitate free zone during long-term creep in 2.25Cr–1Mo steel Materials Science and Engineering: A 591 130 135 https://doi.org/10.1016/j.msea.2013.10.101 2024-04-19 04:22:29 +0900 Paper 2014 7 K. Sawada, H. Kushima, M. Tabuchi, K. Kimura Effect of creep deformation on Z phase formation in Gr.91 steel Materials Science and Technology 30 1 12 16 https://doi.org/10.1179/1743284713y.0000000309 2024-04-19 04:22:29 +0900 Paper 2013 1 本郷 宏通, 田淵 正明, 劉 源, 塚本 進 高Cr耐熱鋼の溶接部におけるクリープ中の組織変化とType-IV損傷挙動 Journal of the Society of Materials Science, Japan 62 2 75 81 https://doi.org/10.2472/jsms.62.75 2024-04-19 04:22:29 +0900 Paper 2013 2 Ryuji SUGIURA, A. Toshimitsu YOKOBORI, Jr., Kazuto SATO, 田淵 正明, Kenichi KOBAYASHI, Masataka YATOMI, Kamran NIKBIN 高Cr鋼溶接継手材の初期クリープき裂成長速度特性とき裂発生寿命評価 Journal of the Society of Materials Science, Japan 62 2 68 74 https://doi.org/10.2472/jsms.62.68 2024-04-19 04:22:29 +0900 Paper 2012 1 Masaaki Tabuchi, Hiromichi Hongo, Takashi Watanabe, Kota Sawada Gr.122鋼の溶接継手におけるType-IVクリープ損傷に及ぼす開先形状の効果 Materials at High Temperatures 29 4 293 300 https://doi.org/10.3184/096034012x13481602910163 2024-04-19 04:22:29 +0900 Paper 2012 2 Ken-ichi KOBAYASHI, Masahiro KANEKO, Hideo KOYAMA, Gavin C. STRATFORD, Masaaki TABUCHI スモールパンチクリープ試験の破断時間に及ぼす試験環境と保持ダイスの半径の影響 Journal of Solid Mechanics and Materials Engineering 6 8 925 934 https://doi.org/10.1299/jmmp.6.925 2024-04-19 04:22:29 +0900 Paper 2012 3 Masaaki Tabuchi, Yukio Takahashi 改良9Cr-1Mo鋼の溶接継手クリープ強度低減係数の評価 Journal of Pressure Vessel Technology 134 3 https://doi.org/10.1115/1.4006131 2024-04-19 04:22:29 +0900 Paper 2012 4 Hiromichi Hongo, Masaaki Tabuchi, Takashi Watanabe Gr.91鋼溶接継手におけるタイプIVクリープ損傷挙動 Metallurgical and Materials Transactions A 43 4 1163 1173 https://doi.org/10.1007/s11661-011-0967-6 2024-04-19 04:22:29 +0900 Paper 2012 5 R. Sugiura, A.T. Yokobori, T. Nakagawa, T. Adachi, I. Nonaka, M. Tabuchi, Y. Hasegawa, T. Matsuzaki, A. Saxena, B. Dogan, S. W. Dean 環状切欠丸棒試験片を用いたP92鋼のクリープ疲労き裂の発生と成長寿命の評価 Journal of ASTM International 9 1 103956 https://doi.org/10.1520/jai103956 2024-04-19 04:22:29 +0900 Paper 2011 1 A. Toshimitsu Yokobori Jr., Ryuji Sugiura, Masaaki Tabuchi, Masataka Yatomi, Kenichi Kobayashi, Kamran Nikbin 高Cr鋼とその溶接継手におけるクリープき裂成長の潜伏期間の定義と予測方法（クリープき裂発生） Strength, Fracture and Complexity 7 3 315 320 https://doi.org/10.3233/sfc-2012-0146 2024-04-19 04:22:29 +0900 Paper 2011 2 Ken-ichi KOBAYASHI, Masahiro KANEKO, Hideo KOYAMA, Gavin C. STRATFORD, Masaaki TABUCHI スモールパンチクリープ試験における変形、破壊とその影響因子（試験雰囲気と下部ダイの肩半径について） TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 77 784 2046 2053 https://doi.org/10.1299/kikaia.77.2046 2024-04-19 04:22:29 +0900 Paper 2011 3 M. Tabuchi, A.T. Yokobori Jr., R. Sugiura, M. Yatomi, K. Kobayashi Gr.92鋼の溶接部のクリープき裂成長特性の評価 Strength, Fracture and Complexity 7 2 137 146 https://doi.org/10.3233/sfc-2011-0132 2024-04-19 04:22:29 +0900 Paper 2011 4 Masaaki Tabuchi, Hiromichi Hongo 高Crフェライト鋼の溶接部の長時間クリープ損傷の評価 Materials at High Temperatures 28 3 172 180 https://doi.org/10.3184/096034011x13123540966196 2024-04-19 04:22:29 +0900 Paper 2011 5 F. Abe, M. Tabuchi, S. Tsukamoto Metallurgy of Type IV fracture in advanced ferritic power plant steels Materials at High Temperatures 28 2 85 94 https://doi.org/10.3184/096034011x13056166748234 2024-04-19 04:22:29 +0900 Paper 2011 6 K. Sawada, H. Kushima, M. Tabuchi, K. Kimura Microstructural degradation of Gr.91 steel during creep under low stress Materials Science and Engineering: A 528 16-17 5511 5518 https://doi.org/10.1016/j.msea.2011.03.073 2024-04-19 04:22:29 +0900 Paper 2011 7 TABUCHI, Masaaki, HONGO, Hiromichi 高クロムフェライト鋼の溶接部の組織とクリープ損傷の評価 ACTA METALLURGICA SINICA (ENGLISH LETTERS) 24 3 225 234 2024-04-19 04:22:29 +0900 Paper 2011 8 HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro, SAKKA, Yoshio, TABUCHI, Masaaki 酸化物セラミックスにおける高速超塑性：クリープキャビテーション機構に基づく微視構造設計の試み ACTA METALLURGICA SINICA 24 3 195 204 2024-04-19 04:22:29 +0900 Paper 2011 9 Yukio Takahashi, TABUCHI, Masaaki 高クロム鋼の溶接部のクリープおよびクリープ－疲労挙動 ACTA METALLURGICA SINICA (ENGLISH LETTERS) 24 3 175 182 2024-04-19 04:22:29 +0900 Paper 2011 10 Kazuhiro Kimura, Masaaki Tabuchi, Yukio Takahashi, Kazuo Yoshida, Koichi Yagi International Journal of Microstructure and Materials Properties 6 1/2 72 https://doi.org/10.1504/ijmmp.2011.040438 2024-04-19 04:22:29 +0900 Paper 2011 11 Yukio Takahashi, Masaaki Tabuchi グレード122接継手クリープ強度低減係数の評価 Journal of Pressure Vessel Technology 133 2 https://doi.org/10.1115/1.4002678 2024-04-19 04:22:29 +0900 Paper 2011 12 本郷 宏通, 田淵 正明, 渡部 隆 Gr.122鋼溶接継手のクリープ強度と損傷の評価 材料 60 2 116 123 https://doi.org/10.2472/jsms.60.116 2024-04-19 04:22:29 +0900 Paper 2011 13 Masayoshi Yamazaki, Takashi Watanabe, Hiromichi Hongo, Masaaki Tabuchi 鋼異材継手のクリープ破断特性と破壊様式 Welding in the World 55 1-2 67 77 https://doi.org/10.1007/bf03263517 2024-04-19 04:22:29 +0900 Paper 2010 1 Ryuji Sugiura, A. Toshimitsu Yokobori Jr., Kazuto Sato, Masaaki Tabuchi, Masataka Yatomi, Kenichi Kobayashi, Kamran Nikbin C*, dδ/dt および Q*パラメーターに基づくＰ９２鋼の溶接部におけるクリープき裂の発生・成長の特徴 Strength, Fracture and Complexity 6 4 177 189 https://doi.org/10.3233/sfc-2011-0116 2024-04-19 04:22:29 +0900 Paper 2010 2 F. Abe, M. Tabuchi, S. Tsukamoto, T. Shirane Microstructure evolution in HAZ and suppression of Type IV fracture in advanced ferritic power plant steels International Journal of Pressure Vessels and Piping 87 11 598 604 https://doi.org/10.1016/j.ijpvp.2010.08.005 2024-04-19 04:22:29 +0900 Paper 2010 3 K. Sawada, H. Hongo, T. Watanabe, M. Tabuchi Analysis of the microstructure near the crack tip of ASME Gr.92 steel after creep crack growth Materials Characterization 61 11 1097 1102 https://doi.org/10.1016/j.matchar.2010.07.003 2024-04-19 04:22:29 +0900 Paper 2010 4 M. Tabuchi, A.T. Yokobori, R. Sugiura, M. Yatomi, A. Fuji, K. Kobayashi Gr.92鋼溶接継手を用いたクリープき裂成長に関する日本におけるラウンドロビン試験の結果 Engineering Fracture Mechanics 77 15 3066 3076 https://doi.org/10.1016/j.engfracmech.2010.03.044 2024-04-19 04:22:29 +0900 Paper 2010 5 M. Yatomi, M. Tabuchi クリープき裂成長の数値モデリングに関する問題 Engineering Fracture Mechanics 77 15 3043 3052 https://doi.org/10.1016/j.engfracmech.2010.04.024 2024-04-19 04:22:29 +0900 Paper 2010 6 Yongkui Li, Yoshio Monma, Hiromichi Hongo, Masaaki Tabuchi 改良９Cr-1Mo鋼の溶接継手におけるクリープ損傷の評価 Journal of Nuclear Materials 405 1 44 49 https://doi.org/10.1016/j.jnucmat.2010.07.033 2024-04-19 04:22:29 +0900 Paper 2010 7 Ryuji Sugiura, A. Toshimitsu Yokobori, Kazuto Suzuki, Masaaki Tabuchi P92鋼の溶接部におけるクリープき裂成長の潜伏時間の評価 Engineering Fracture Mechanics 77 15 3053 3065 https://doi.org/10.1016/j.engfracmech.2010.04.025 2024-04-19 04:22:29 +0900 Paper 2010 8 Masataka Yatomi, Akio Fuji, Masaaki Tabuchi, Yasushi Hasegawa, Ken-ichi I. Kobayashi, Toshimitsu Yokobori, Takeo Yokobori 破壊力学パラメーターを用いたP92鋼溶接部のクリープき裂成長速度の評価 Journal of Pressure Vessel Technology 132 4 https://doi.org/10.1115/1.4001522 2024-04-19 04:22:29 +0900 Paper 2009 1 Kota Sawada, Masakazu Fujitsuka, Masaaki Tabuchi, Kazuhiro Kimura Effect of oxidation on the creep rupture life of ASME T23 steel International Journal of Pressure Vessels and Piping 86 10 693 698 https://doi.org/10.1016/j.ijpvp.2009.03.001 2024-04-19 04:22:29 +0900 Paper 2009 2 Yongkui Li, Hiromichi Hongo, Masaaki Tabuchi, Yukio Takahashi, Yoshio Monma International Journal of Pressure Vessels and Piping 86 9 585 592 https://doi.org/10.1016/j.ijpvp.2009.04.008 2024-04-19 04:22:29 +0900 Paper 2009 3 杉浦 隆次, 横堀 壽光, 鈴木 和人, 田淵 正明 溶接熱影響部におけるクリープき裂成長挙動に及ぼす局所応力多軸効果 鉄と鋼 95 4 361 368 https://doi.org/10.2355/tetsutohagane.95.361 2024-04-19 04:22:29 +0900 Paper 2009 4 K. Sawada, M. Tabuchi, K. Kimura Creep strength degradation of ASME P23/T23 steels Materials Science and Engineering: A 513-514 128 137 https://doi.org/10.1016/j.msea.2009.02.027 2024-04-19 04:22:29 +0900 Paper 2009 5 SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro Analysis of long-term creep curve by constitutive equations MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 190 194 2024-04-19 04:22:29 +0900 Paper 2009 6 田淵 正明, 本郷 宏通, 高橋 由紀夫 高Cr耐熱鋼の溶接継手の組織とクリープ特性に及ぼすボロンの影響 材料 58 2 108 114 https://doi.org/10.2472/jsms.58.108 2024-04-19 04:22:29 +0900 Paper 2009 7 本郷 宏通, 田淵 正明, 李 永奎, 高橋 由紀夫 Mod. 9Cr-1Mo鋼溶接継手のクリープ損傷挙動 材料 58 2 101 107 https://doi.org/10.2472/jsms.58.101 2024-04-19 04:22:29 +0900 Paper 2009 8 Masaaki Tabuchi, Hiromichi Hongo, Yongkui Li, Takashi Watanabe, Yukio Takahashi Evaluation of Microstructures and Creep Damages in HAZ of P91 Steel Weldment Journal of Pressure Vessel Technology 131 2 021406 https://doi.org/10.1115/1.3028021 2024-04-19 04:22:29 +0900 Paper 2009 9 Ryuji Sugiura, A. Toshimitsu Yokobori, Masaaki Tabuchi, Akio Fuji, Takeshi Adachi Wを添加した１２Crフェライト系耐熱鋼のクリープき裂成長における多軸応力に関する構造脆性の評価 Journal of Engineering Materials and Technology 131 1 011004 https://doi.org/10.1115/1.3026544 2024-04-19 04:22:29 +0900 Paper 2008 1 M. Tabuchi Fracture Mechanics: understanding in microdimensions Creep-resistant steels "" "" 504 518 https://doi.org/10.1533/9781845694012.2.504 2024-04-19 04:22:29 +0900 Paper 2008 2 K. Sawada, M. Tabuchi, H. Hongo, T. Watanabe, K. Kimura Z-Phase formation in welded joints of high chromium ferritic steels after long-term creep Materials Characterization 59 9 1161 1167 https://doi.org/10.1016/j.matchar.2007.09.009 2024-04-19 04:22:29 +0900 Paper 2008 3 杉浦隆次, 鈴木和人, 横堀壽光, 田淵 正明 W添加９Ｃｒフェライト系耐熱鋼溶接継手材のクリープき裂成長に及ぼす応力多軸効果 JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS(日本材料強度学会誌) 42 3 49 53 2024-04-19 04:22:29 +0900 Paper 2008 4 TABUCHI, Masaaki 高Cr鋼の溶接熱影響部のクリープ損傷評価 OPERATION MAINTENANCE AND MATERIALS ISSUES 5 2 1 11 2024-04-19 04:22:29 +0900 Paper 2008 5 Masayoshi YAMAZAKI, Takashi WATANABE, Hiromichi HONGO, Masaaki TABUCHI 耐熱鋼の溶接継手のクリープ破断特性 Journal of Power and Energy Systems 2 4 1140 1149 https://doi.org/10.1299/jpes.2.1140 2024-04-19 04:22:29 +0900 Paper 2008 6 K. Sawada, K. Suzuki, H. Kushima, M. Tabuchi, K. Kimura Effect of Tempering Temperature on Z-Phase Formation and Creep Strength in 9Cr-1Mo-V-Nb-N Steel Materials Science and Engineering: A 480 1-2 558 563 https://doi.org/10.1016/j.msea.2007.09.031 2024-04-19 04:22:29 +0900 Paper 2008 7 楠 克之, 田淵 正明 分子動力学法によるBCC鉄中の自己格子間拡散の研究 日本金属学会誌 72 1 39 42 https://doi.org/10.2320/jinstmet.72.39 2024-04-19 04:22:29 +0900 Paper 2007 1 渡部 隆, 本郷 宏通, 山崎 政義, 田淵 正明 異材溶接継手の高温強度特性と破壊形態 鉄と鋼 93 8 552 557 https://doi.org/10.2355/tetsutohagane.93.552 2024-04-19 04:22:29 +0900 Paper 2007 2 Ryuji Sugiura, A. Toshimitsu Jr. Yokobori, Shinjyu Takamori, Masaaki Tabuchi, Akio Fuji, Mitsuo Yoda, Kenichi Kobayashi, Takeo Yokobori Effects of Alloying Additions and Material Microstructure on the Accuracy of the Predictive Law of Creep Crack Growth for W-Strengthened 9–12%Cr Ferritic Heat-Resistant Steel MATERIALS TRANSACTIONS 48 11 2928 2936 https://doi.org/10.2320/matertrans.mra2007112 2024-04-19 04:22:29 +0900 Paper 2007 3 Kota Sawada, Hideaki Kushima, Kazuhiro Kimura, Masaaki Tabuchi TTP diagrams of Z phase in 9-12%Cr heat resistant steels ISIJ International 47 5 733 739 https://doi.org/10.2355/isijinternational.47.733 2024-04-19 04:22:29 +0900 Paper 2007 4 Ryuji Sugiura, Toshimitsu　Yokobori, Jr., M. Arai, TABUCHI, Masaaki, Akio Fuji Effect of embrittlement on creep crack growth rate for W-added 12Cr ferritic heat resistant steel concerning multi-axial stress and aging STRENGTH, FRACTURE AND COMPLEXITY 4 4 225 235 2024-04-19 04:22:29 +0900 Paper 2007 5 R. Sugiura, A.T. Yokobori, M. Tabuchi, T. Yokobori Comparison of creep crack growth rate in heat affected zone of welded joint for 9%Cr ferritic heat resistant steel based on C*, dδ/dt, K and Q* parameters Engineering Fracture Mechanics 74 6 868 881 https://doi.org/10.1016/j.engfracmech.2006.10.003 2024-04-19 04:22:29 +0900 Paper 2007 6 ABE, Fujio, TABUCHI, Masaaki, Masayuki Kondo, Hirokazu Okada Suppression of Type IV fracture in welded joints of advanced ferritic power plant steels - Effect of boron and nitrogen - MATERIALS AT HIGH TEMPERATURES 23 4/3 145 154 2024-04-19 04:22:29 +0900 Paper 2007 7 Fujio Abe, Masaaki Tabuchi, Masayuki Kondo, Susumu Tsukamoto Suppression of Type IV fracture and improvement of creep strength of 9Cr steel welded joints by boron addition International Journal of Pressure Vessels and Piping 84 1-2 44 52 https://doi.org/10.1016/j.ijpvp.2006.09.013 2024-04-19 04:22:29 +0900 Paper 2006 1 TABUCHI, Masaaki, Jechang, HA, 横堀寿光 STRENGTH, FRACTURE AND COMPLEXITY 4 1 47 54 2024-04-19 04:22:29 +0900 Paper 2006 2 杉浦 隆次, 横堀 壽光, 高森 新樹, 田淵 正明, 富士 彰夫, 依田 満夫, 小林 謙一, 横堀 武夫 W添加9-12%Crフェライト系耐熱鋼におけるクリープき裂成長寿命予測式の高精度化に及ぼす化学成分，材料組織の影響 日本金属学会誌 70 5 452 460 https://doi.org/10.2320/jinstmet.70.452 2024-04-19 04:22:29 +0900 Paper 2006 3 M. Kondo, M. Tabuchi, S. Tsukamoto, F. Yin, F. Abe Science and Technology of Welding and Joining 11 2 216 223 https://doi.org/10.1179/174329306x89260 2024-04-19 04:22:29 +0900 Paper 2006 4 M Tabuchi, H Hongo, T Watanabe, AT Yokobori Journal of ASTM International 3 5 13226 https://doi.org/10.1520/jai13226 2024-04-19 04:22:29 +0900 Paper 2006 5 Shaju K. Albert, Matsui Masakazu, WATANABE, Takashi, HONGO, Hiromichi, KUBO, Kiyoshi, TABUCHI, Masaaki 高Crフェライト鋼の溶接継手と再現HAZのクリープ挙動 TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 59 1 47 55 2024-04-19 04:22:29 +0900 Paper 2006 6 Takashi Watanabe, Masaaki Tabuchi, Masayoshi Yamazaki, Hiromichi Hongo, Tatsuhiko Tanabe Type IV破壊した9Cr-1Mo-V-Nb鋼溶接継手のクリープ損傷評価 International Journal of Pressure Vessels and Piping 83 1 63 71 https://doi.org/10.1016/j.ijpvp.2005.09.004 2024-04-19 04:22:29 +0900 Paper 2005 1 田淵 正明, 近藤 雅之, 本郷 宏通, 渡部 隆, 殷 福星, 阿部 冨士雄 ボロン添加による高Cr耐熱鋼溶接継手のクリープ特性の改善 材料 54 2 162 167 https://doi.org/10.2472/jsms.54.162 2024-04-19 04:22:29 +0900 Paper 2005 2 本郷 宏通, 山崎 政義, 渡部 隆, 田淵 正明, 田辺 龍彦, 門馬 義雄 多層溶接継手のクリープ変形挙動に及ぼす溶接金属部の不均一な高温強度特性の影響 材料 54 2 155 161 https://doi.org/10.2472/jsms.54.155 2024-04-19 04:22:29 +0900 Paper 2005 3 Je Chang Ha, Joon Hyun Lee, TABUCHI, Masaaki, A. Toshimitsu Yokobori KEY ENGINEERING MATERIALS 397 402 2024-04-19 04:22:29 +0900 Paper 2005 4 ABE, Fujio, TABUCHI, Masaaki, KONDO, MASAYUKI, TSUKAMOTO, Susumu WELDING IN THE WORLD 49 7 59 66 2024-04-19 04:22:29 +0900 Paper 2005 5 S. K. Albert, M. Tabuchi, H. Hongo, T. Watanabe, K. Kubo, M. Matsui Science and Technology of Welding and Joining 10 2 149 157 https://doi.org/10.1179/174329305x36034 2024-04-19 04:22:29 +0900 Paper 2005 6 SHAJU, ALBERT, KONDO, MASAYUKI, TABUCHI, Masaaki, YIN, Fuxing, SAWADA, Kota, ABE, Fujio METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 36A "" 333 343 2024-04-19 04:22:29 +0900 Paper 2004 1 渡部 隆, 山崎 政義, 本郷 宏通, 田淵 正明, 田辺 龍彦 9Cr-1Mo-V-Nb鋼溶接継手の長時間クリープにおけるType IV破壊と微細組織 鉄と鋼 90 4 206 212 https://doi.org/10.2355/tetsutohagane1955.90.4_206 2024-04-19 04:22:29 +0900 Paper 2004 2 TABUCHI, Masaaki, KONDO, MASAYUKI, KUBO, Kiyoshi, SHAJU, ALBERT OPERATION MAINTENANCE AND MATERIALS ISSUES 3 3 1 11 2024-04-19 04:22:29 +0900 Paper 2004 3 木村 一弘, 山崎 政義, 田淵 正明 NIMSクリープデータシートプロジェクト　38年間の足跡と今後の展開 ふぇらむ 9 11 816 820 2024-04-19 04:22:29 +0900 Paper 2004 4 HONGO, Hiromichi, YAMAZAKI, Masayoshi, WATANABE, Takashi, TANABE, Tatsuhiko, TABUCHI, Masaaki, 門馬義雄 ACTA METALLURGICA SINICA 17 4 369 374 2024-04-19 04:22:29 +0900 Paper 2004 5 TABUCHI, Masaaki, KONDO, MASAYUKI, WATANABE, Takashi, HONGO, Hiromichi, YIN, Fuxing, ABE, Fujio ACTA METALLURGICA SINICA 17 4 331 337 2024-04-19 04:22:29 +0900 Paper 2004 6 Masaaki Tabuchi, Jechang Ha, Hiromichi Hongo, Takashi Watanabe, Toshimitsu Yokobori 破壊様式に基づくクリープき裂成長の計算シミュレーション Metallurgical and Materials Transactions A 35 6 1757 1764 https://doi.org/10.1007/s11661-004-0084-x 2024-04-19 04:22:29 +0900 Paper 2004 7 T. Adachi, A.T. Yokobori, Jr, M. Tabuchi, A. Fuji, T. Yokobori, K. Nikbin Cr-Mo-V鋼の環状切欠試験片のQ*パラメータの提案とクリープき裂成長寿命則の導出 Materials at High Temperatures 21 2 95 100 https://doi.org/10.3184/096034004782749962 2024-04-19 04:22:29 +0900 Paper 2004 8 Jechang Ha, Masaaki Tabuchi, Hiromichi Hongo, A. Toshimitsu Yokobori, Akio Fuji 12CrWCoB鋼の環状切欠試験片を用いたクリープき裂成長特性 International Journal of Pressure Vessels and Piping 81 5 401 407 https://doi.org/10.1016/j.ijpvp.2004.03.011 2024-04-19 04:22:29 +0900 Paper 2004 9 S.K Albert, M Matsui, H Hongo, T Watanabe, K Kubo, M Tabuchi International Journal of Pressure Vessels and Piping 81 3 221 234 https://doi.org/10.1016/j.ijpvp.2004.01.003 2024-04-19 04:22:29 +0900 Paper 2004 10 Takashi Watanabe, Masayoshi Yamazaki, Hiromichi Hongo, Masaaki Tabuchi, Tatsuhiko Tanabe 多層盛り溶接した2.25Cr-1Mo鋼溶接継手の823Kにおける微細組織変化に及ぼす応力の影響 International Journal of Pressure Vessels and Piping 81 3 279 284 https://doi.org/10.1016/j.ijpvp.2003.12.017 2024-04-19 04:22:29 +0900 Paper 2004 11 F. Abe, M. Tabuchi Science and Technology of Welding and Joining 9 1 22 30 https://doi.org/10.1179/136217104225017107 2024-04-19 04:22:29 +0900