SAMURAI - NIMS Researchers Database

HOME > プロフィール > 田淵 正明

田淵 正明
Address
305-0047 茨城県つくば市千現1-2-1 [アクセス]
  • 論文・発表

[研究論文] |[書籍] |[会議録] |[口頭発表] |[特許]

研究論文 TSV

2019
  1. 鶴田 秀樹, 戸田 裕之, 弥富 政享, 吉田 公亮, 竹内 晃久, 上椙 真之, 田淵 正明, 本郷 宏通. X線マイクロトモグラフィによる改良9Cr-1Mo鋼溶接部におけるクリープボイドの定量評価. 材料. 68 [8] (2019) 599-606 10.2472/jsms.68.599
  2. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi. Creep Behavior in Pure Magnesium at Room Temperature. MATERIALS TRANSACTIONS. 60 [6] (2019) 975-979 10.2320/matertrans.m2018334
  3. Kozo Koiwa, Masaaki Tabuchi, Masahiko Demura, Masayoshi Yamazaki, Makoto Watanabe. Prediction of Creep Rupture Time Using Constitutive Laws and Damage Rules in 9Cr–1Mo–V–Nb Steel Welds. MATERIALS TRANSACTIONS. 60 [2] (2019) 213-221 10.2320/matertrans.me201703
  4. 駒崎 慎一, 塚元 崇博, 宮田 圭佑, 田淵 正明, 本郷 宏通. 高Crフェライト系耐熱鋼溶接継手部のクリープに伴う水素放出特性の変化. 材料. 68 [2] (2019) 106-113 10.2472/jsms.68.106
  5. ABE, Fujio, OHBA, Toshio, MIYAZAKI, Hideko, TODA, Yoshiaki, TABUCHI, Masaaki. Effect of W–Mo balance on long-term creep life of 9Cr steel. MATERIALS AT HIGH TEMPERATURES. 36 [4] (2019) 314-324 10.1080/09603409.2018.1555202
  6. Fujio Abe, Toshio Ohba, Hideko Miyazaki, Yoshiaki Toda, Masaaki Tabuchi. Effect of W-Mo balance and boron nitrides on creep rupture ductility of 9Cr steel. Materials at High Temperatures. 36 [4] (2019) 368-378 10.1080/09603409.2019.1574369
  7. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Maaouia Souissi, Ryoji Sahara, Collin Whitt, Wei Zhang, M.J. Mills. Creep lifetime and microstructure evolution in boron-added 9Cr–1Mo heat-resistant steel. Materials Science and Engineering: A. 760 (2019) 267-276 10.1016/j.msea.2019.05.114
  8. Y. Liu, S. Tsukamoto, H. Hongo, F. Yin, M. Tabuchi, F. Abe. Microstructure Evolution of Fine-Grained Heat-Affected Zone of Gr.92 Steel Welded Joint During Creep. Metallurgical and Materials Transactions A. 50 [7] (2019) 3080-3090 10.1007/s11661-019-05245-6
2018
  1. Maaouia Souissi, Marcel H. F. Sluiter, Tetsuya Matsunaga, Masaaki Tabuchi, Michael J. Mills, Ryoji Sahara. Effect of mixed partial occupation of metal sites on the phase stability of γ-Cr23−xFexC6 (x = 0–3) carbides. Scientific Reports. 8 [1] (2018) 10.1038/s41598-018-25642-y
  2. Haruhisa Shigeyama, A. Toshimitsu Yokobori, Jr., Ryuji Sugiura, Kazuto Satoh, TABUCHI, Masaaki. 高Cr鋼溶接切り欠き材のクリープき裂発生・成長に及ぼす空孔拡散凝集挙動の効果. JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS. 51 [4] (2018) 67-72
2017
  1. Masaaki Tabuchi, Hiromichi Hongo, Tetsuya Matsunaga. Long-term creep strength and fracture of Gr.91 steel welds. Materials at High Temperatures. 34 [5-6] (2017) 466-472 10.1080/09603409.2017.1378974
  2. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi. Interfacial failure in dissimilar weld joint of high boron 9% chromium steel and nickel-based alloy under high-temperature creep condition. Materials Science and Engineering: A. 695 (2017) 302-308 10.1016/j.msea.2017.04.012
  3. 大谷 俊博, 本間 匠, 石井 優, 田淵 正明, 本郷 宏通, 平尾 雅彦. ASME Gr.91鋼溶接継手のクリープ損傷中の非線形超音波特性の変化. 材料. 66 [2] (2017) 114-121 10.2472/jsms.66.114
  4. 松永 哲也, 本郷 宏通, 田淵 正明. 高温クリープ環境下におけるNi基溶接金属の延性低下. 材料. 66 [2] (2017) 138-141 10.2472/jsms.66.138
  5. HONGO, Hiromichi, TABUCHI, Masaaki, MATSUNAGA, Tetsuya. Gr.91鋼溶接継手の長時間クリープ強度と破壊. JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS. 50 [2] (2017) 25-34
  6. Fujio Abe, M. Tabuchi, M. Hayakawa. Influence of Data Scattering on Estimation of 100,000 hrs Creep Rupture Strength of Alloy 617 at 700 °C by Larson–Miller Method. Journal of Pressure Vessel Technology. 139 [1] (2017) 011403 10.1115/1.4033290
  7. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Yuhki Satoh, Hiroaki Abe. Transition of creep mechanism by solute hydrogen in Zircaloy-4. Materials Science and Engineering: A. 684 (2017) 191-195 10.1016/j.msea.2016.12.057
2016
  1. 松永 哲也, 本郷 宏通, 田淵 正明. 高温クリープ下でのジルカロイ4の2段定常クリープ挙動. 材料. 65 [10] (2016) 695-699 10.2472/jsms.65.695
  2. TABUCHI, Masaaki. 耐熱鋼の高温破壊特性評価と高強度化. しなやかで強い鉄鋼材料-革新的構造用金属材料の開発最前線. (2016) 369-377
  3. Ryoji Sahara, Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi. Theoretical Investigation of Stabilizing Mechanism by Boron in Body-Centered Cubic Iron Through (Fe,Cr)23(C,B)6 Precipitates. Metallurgical and Materials Transactions A. 47 [5] (2016) 2487-2497 10.1007/s11661-016-3397-7
  4. Toshimitsu Yokobori, Jr., Yusuke Shirai, Akari Ando, Kazutaka Jinno, Haruhisa Shigeyama, Ryuji Sugiura, TABUCHI, Masaaki, Kenichi Kobayashi, Masataka Yatomi, Kamran Nikbin. Q*コンセプトによる溶接材を含むP91鋼およびP92鋼予き裂材のクリープき裂成長開始条件の特定. JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS(日本材料強度学会誌). 49 [4] (2016) 61-68
  5. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Ryoji Sahara. Suppression of grain refinement in heat-affected zone of 9Cr–3W–3Co–VNb steels. Materials Science and Engineering: A. 655 (2016) 168-174 10.1016/j.msea.2015.12.095
  6. Tetsuya Matsunaga, Hidetoshi Somekawa, Hiromichi Hongo, Masaaki Tabuchi. Strain-Rate Sensitivity Enhanced by Grain-Boundary Sliding in Creep Condition for AZ31 Magnesium Alloy at Room Temperature. Materials Science Forum. 838-839 (2016) 106-109 10.4028/www.scientific.net/msf.838-839.106
2015
  1. 田淵 正明. 伝承すべき高温材料試験とその現状. 材料. 64 [11] (2015) 960-966 10.2472/jsms.64.960
  2. T. Matsunaga, H. Somekawa, H. Hongo, M. Tabuchi. Deformation mechanism transition with strain rate in Mg–3Al–1Zn alloy at room temperature. Materials Science and Engineering: A. 647 (2015) 212-215 10.1016/j.msea.2015.09.029
  3. TABUCHI, Masaaki. 耐熱鋼溶接部のクリープ損傷と破壊に関する研究. ふぇらむ. 20 [7] (2015) 327-330
  4. Toshimitsu Yokobori, Jr., Yoshiko Nagumo, Takahiro Yajima, Yosuke Tobita, TABUCHI, Masaaki. 計算力学支援法によるクリープ定数の特定および切欠き材のクリープ寿命則の予測. JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS. 49 [1] (2015) 1-11
  5. M. Tabuchi, H. Hongo, R. Sugiura, A.T. Yokobori, M. Yatomi, K. Kobayashi. Evaluation of damage and fracture of high Cr steel welds at elevated temperatures. Strength, Fracture and Complexity. 9 [1] (2015) 31-41 10.3233/sfc-150177
  6. Yuan Liu, Susumu Tsukamoto, Kota Sawada, Masaaki Tabuchi, Fujio Abe. Precipitation Behavior in the Heat-Affected Zone of Boron-Added 9Cr-3W-3Co Steel During Post-Weld Heat Treatment and Creep Deformation. Metallurgical and Materials Transactions A. 46 [5] (2015) 1843-1854 10.1007/s11661-015-2802-y
  7. K. Sawada, T. Hara, M. Tabuchi, K. Kimura, K. Kubushiro. Microstructure characterization of heat affected zone after welding in Mod.9Cr–1Mo steel. Materials Characterization. 101 (2015) 106-113 10.1016/j.matchar.2015.01.013
  8. 大谷 俊博, 本間 匠, 石井 優, 田淵 正明, 本郷 宏通, 平尾 雅彦. Gr. 122鋼溶接継手のクリープ損傷中の非線形音響特性と微細組織の変化. 材料. 64 [2] (2015) 80-87 10.2472/jsms.64.80
2014
  1. Toshihiro Ohtani, TABUCHI, Masaaki, SAWADA, Kota, HONGO, Hiromichi. 非線形超音波法を用いたボイラー用耐熱鋼のクリープ損傷評価の研究. ボイラ研究. 388 (2014) 25-30
  2. Ryuji Sugiura. Creep Crack Initiation and Growth Behavior in Weldments of High Cr Steels. STRENGTH, FRACTURE AND COMPLEXITY. 8 [2] (2014) 125-133 10.3233/sfc-140163
  3. Masaaki Tabuchi, Hiromichi Hongo, Fujio Abe. Creep Strength of Dissimilar Welded Joints Using High B-9Cr Steel for Advanced USC Boiler. Metallurgical and Materials Transactions A. 45 [11] (2014) 5068-5075 10.1007/s11661-014-2471-2
  4. TABUCHI, Masaaki, HAYAKAWA, Masao. 高効率発電プラント用材料の高温における特性試験技術. 日本試験機工業会 広報誌「TEST」. 32 (2014) 3-5
  5. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu. 火力発電用高クロムフェライト鋼 −溶接継手のクリープ強度劣化の克服−. 金属 (アグネ技術センター). 84 [6] (2014) 465-473
  6. K. Sawada, H. Kushima, T. Hara, M. Tabuchi, K. Kimura. Heat-to-heat variation of creep strength and long-term stability of microstructure in Grade 91 steels. Materials Science and Engineering: A. 597 (2014) 164-170 10.1016/j.msea.2013.12.088
  7. Thuy Dang Nguyen, Kota Sawada, Hideaki Kushima, Masaaki Tabuchi, Kazuhiro Kimura. Change of precipitate free zone during long-term creep in 2.25Cr–1Mo steel. Materials Science and Engineering: A. 591 (2014) 130-135 10.1016/j.msea.2013.10.101
  8. K. Sawada, H. Kushima, M. Tabuchi, K. Kimura. Effect of creep deformation on Z phase formation in Gr.91 steel. Materials Science and Technology. 30 [1] (2014) 12-16 10.1179/1743284713y.0000000309
2013
  1. Hiromichi HONGO, Masaaki TABUCHI, Yuan LIU, Susumu TSUKAMOTO. Microstructural Changes and Type-IV Damage Evolutions during Creep in High Cr Steel Welds. Journal of the Society of Materials Science, Japan. 62 [2] (2013) 75-81 10.2472/jsms.62.75
  2. Ryuji SUGIURA, A. Toshimitsu YOKOBORI, Jr., Kazuto SATO, Masaaki TABUCHI, Kenichi KOBAYASHI, Masataka YATOMI, Kamran NIKBIN. Characterization of Creep Crack Growth Rate at the Early Stage and Estimation of Creep Crack Initiation Life for High Cr Steels and Their Weldments. Journal of the Society of Materials Science, Japan. 62 [2] (2013) 68-74 10.2472/jsms.62.68
2012
  1. Kamran Nikbin. Definition and estimation method of incubation time of creep crack growth for high Cr steels and their weldments (creep crack in. STRENGTH, FRACTURE AND COMPLEXITY. 7 [3] (2012) 315-320 10.3233/sfc-2012-0146
  2. Masaaki Tabuchi, Hiromichi Hongo, Takashi Watanabe, Kota Sawada. Effect of groove configuration on Type-IV creep damages in Gr.122 steel welds. Materials at High Temperatures. 29 [4] (2012) 293-300 10.3184/096034012x13481602910163
  3. Ken-ichi KOBAYASHI, Masahiro KANEKO, Hideo KOYAMA, Gavin C. STRATFORD, Masaaki TABUCHI. The Influence of Both Testing Environment and Fillet Radius of the Die Holder on the Rupture Life of Small Punch Creep Tests. Journal of Solid Mechanics and Materials Engineering. 6 [8] (2012) 925-934 10.1299/jmmp.6.925
  4. Masaaki Tabuchi, Yukio Takahashi. Evaluation of Creep Strength Reduction Factors for Welded Joints of Modified 9Cr-1Mo Steel. Journal of Pressure Vessel Technology. 134 [3] (2012) 031401 10.1115/1.4006131
  5. Hiromichi Hongo, Masaaki Tabuchi, Takashi Watanabe. Type IV Creep Damage Behavior in Gr.91 Steel Welded Joints. Metallurgical and Materials Transactions A. 43 [4] (2012) 1163-1173 10.1007/s11661-011-0967-6
  6. R. Sugiura, A.T. Yokobori, T. Nakagawa, T. Adachi, I. Nonaka, M. Tabuchi, Y. Hasegawa, T. Matsuzaki, A. Saxena, B. Dogan, S. W. Dean. Characterizations of Creep-fatigue Crack Initiation and Growth Life for P92 using Circular Notched Round Bar Specimen. Journal of ASTM International. 9 [1] (2012) 103956 10.1520/jai103956
2011
  1. Ken-ichi KOBAYASHI, Masahiro KANEKO, Hideo KOYAMA, Gavin C. STRATFORD, Masaaki TABUCHI. スモールパンチクリープ試験における変形、破壊とその影響因子(試験雰囲気と下部ダイの肩半径について). TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A. 77 [784] (2011) 2046-2053 10.1299/kikaia.77.2046
  2. TABUCHI Masaaki. Evaluation of Creep Crack Growth Properties of Gr.92 Steel Weldment. STRENGTH, FRACTURE AND COMPLEXITY. 7 [2] (2011) 137-146 10.3233/sfc-2011-0132
  3. Ruji Sugiura. Creep crack initiation and growth characteristics in weldment for P92 based on C*, dδ/dt and Q* parameters. STRENGTH, FRACTURE AND COMPLEXITY. 6 [4] (2011) 177-189 10.3233/sfc-2011-0116
  4. Masaaki Tabuchi, Hiromichi Hongo. Evaluation of long-term creep damage in high Cr ferritic steel welds. Materials at High Temperatures. 28 [3] (2011) 172-180 10.3184/096034011x13123540966196
  5. TABUCHI, Masaaki, HONGO, Hiromichi. Evaluation of microstructure and creep damage in high-Cr ferritic steel welds. ACTA METALLURGICA SINICA (ENGLISH LETTERS). 24 [3] (2011) 225-234
  6. F. Abe, M. Tabuchi, S. Tsukamoto. Metallurgy of Type IV fracture in advanced ferritic power plant steels. Materials at High Temperatures. 28 [2] (2011) 85-94 10.3184/096034011x13056166748234
  7. K. Sawada, H. Kushima, M. Tabuchi, K. Kimura. Microstructural degradation of Gr.91 steel during creep under low stress. Materials Science and Engineering: A. 528 [16-17] (2011) 5511-5518 10.1016/j.msea.2011.03.073
  8. HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro, SAKKA, Yoshio, TABUCHI, Masaaki. High-Strain-Rate Superplasticity in Oxide Ceramics: a Trial of Microstructural Design Based on Creep-Cavitation Mechanisms. ACTA METALLURGICA SINICA. 24 [3] (2011) 195-204
  9. Yukio Takahashi, TABUCHI, Masaaki. Creep and Creep‐Fatigue Behavior of High Chromium Steel Weldment. ACTA METALLURGICA SINICA (ENGLISH LETTERS). 24 [3] (2011) 175-182
  10. Kazuhiro Kimura, Masaaki Tabuchi, Yukio Takahashi, Kazuo Yoshida, Koichi Yagi. Long-term creep strength and strength reduction factor for welded joints of ASME Grades 91, 92 and 122 type steels. International Journal of Microstructure and Materials Properties. 6 [1/2] (2011) 72 10.1504/ijmmp.2011.040438
  11. 本郷 宏通, 田淵 正明, 渡部 隆. Gr.122鋼溶接継手のクリープ強度と損傷の評価. 材料. 60 [2] (2011) 116-123 10.2472/jsms.60.116
  12. Yukio Takahashi, Masaaki Tabuchi. Evaluation of Creep Strength Reduction Factors for Welded Joints of Grade 122 Steel. Journal of Pressure Vessel Technology. 133 [2] (2011) 021401 10.1115/1.4002678
  13. Masayoshi Yamazaki, Takashi Watanabe, Hiromichi Hongo, Masaaki Tabuchi. Creep Rupture Properties and fracture type of 9Cr-1Mo-V-Nb/18Cr-8Ni steel dissimilar joints. Welding in the World. 55 [1-2] (2011) 67-77 10.1007/bf03263517
2010
  1. K. Sawada, H. Hongo, T. Watanabe, M. Tabuchi. Analysis of the microstructure near the crack tip of ASME Gr.92 steel after creep crack growth. Materials Characterization. 61 [11] (2010) 1097-1102 10.1016/j.matchar.2010.07.003
  2. F. Abe, M. Tabuchi, S. Tsukamoto, T. Shirane. Microstructure evolution in HAZ and suppression of Type IV fracture in advanced ferritic power plant steels. International Journal of Pressure Vessels and Piping. 87 [11] (2010) 598-604 10.1016/j.ijpvp.2010.08.005
  3. M. Yatomi, M. Tabuchi. Issues relating to numerical modelling of creep crack growth. Engineering Fracture Mechanics. 77 [15] (2010) 3043-3052 10.1016/j.engfracmech.2010.04.024
  4. Yongkui Li, Yoshio Monma, Hiromichi Hongo, Masaaki Tabuchi. Evaluation of creep damage in a welded joint of modified 9Cr–1Mo steel. Journal of Nuclear Materials. 405 [1] (2010) 44-49 10.1016/j.jnucmat.2010.07.033
  5. Ryuji Sugiura, A. Toshimitsu Yokobori, Kazuto Suzuki, Masaaki Tabuchi. Characterization of incubation time on creep crack growth for weldments of P92. Engineering Fracture Mechanics. 77 [15] (2010) 3053-3065 10.1016/j.engfracmech.2010.04.025
  6. M. Tabuchi, A.T. Yokobori, R. Sugiura, M. Yatomi, A. Fuji, K. Kobayashi. Results of a Japanese round robin program for creep crack growth using Gr.92 steel welds. Engineering Fracture Mechanics. 77 [15] (2010) 3066-3076 10.1016/j.engfracmech.2010.03.044
  7. Masataka Yatomi, Akio Fuji, Masaaki Tabuchi, Yasushi Hasegawa, Ken-ichi I. Kobayashi, Toshimitsu Yokobori, Takeo Yokobori. Evaluation of Creep Crack Growth Rate of P92 Welds Using Fracture Mechanics Parameters. Journal of Pressure Vessel Technology. 132 [4] (2010) 041404 10.1115/1.4001522
  8. K Hiraga, B-N Kim, K Morita, H Yoshida, M Tabuchi. Cavitation failure during superplastic tensile loading in alumina-base ceramics. Journal of Physics: Conference Series. 240 (2010) 012145 10.1088/1742-6596/240/1/012145
2009
  1. F Abe, M Tabuchi, S Tsukamoto. Mechanisms for boron effect on microstructure and creep strength of ferritic power plant steels. Energy Materials. 4 [4] (2009) 166-174 10.1179/174892312x13269692038851
  2. Kota Sawada, Masakazu Fujitsuka, Masaaki Tabuchi, Kazuhiro Kimura. Effect of oxidation on the creep rupture life of ASME T23 steel. International Journal of Pressure Vessels and Piping. 86 [10] (2009) 693-698 10.1016/j.ijpvp.2009.03.001
  3. Yongkui Li, Hiromichi Hongo, Masaaki Tabuchi, Yukio Takahashi, Yoshio Monma. Evaluation of creep damage in heat affected zone of thick welded joint for Mod.9Cr–1Mo steel. International Journal of Pressure Vessels and Piping. 86 [9] (2009) 585-592 10.1016/j.ijpvp.2009.04.008
  4. 杉浦 隆次, 横堀 壽光, 鈴木 和人, 田淵 正明. 溶接熱影響部におけるクリープき裂成長挙動に及ぼす局所応力多軸効果. 鉄と鋼. 95 [4] (2009) 361-368 10.2355/tetsutohagane.95.361
  5. K. Sawada, M. Tabuchi, K. Kimura. Creep strength degradation of ASME P23/T23 steels. Materials Science and Engineering: A. 513-514 (2009) 128-137 10.1016/j.msea.2009.02.027
  6. 本郷 宏通, 田淵 正明, 李 永奎, 高橋 由紀夫. Mod.9Cr‐1Mo鋼溶接継手のクリープ損傷挙動. 材料. 58 [2] (2009) 101-107 10.2472/jsms.58.101
  7. 田淵 正明, 本郷 宏通, 高橋 由紀夫. 高Cr耐熱鋼の溶接継手の組織とクリープ特性に及ぼすボロンの影響. 材料. 58 [2] (2009) 108-114 10.2472/jsms.58.108
  8. Masaaki Tabuchi, Hiromichi Hongo, Yongkui Li, Takashi Watanabe, Yukio Takahashi. Evaluation of Microstructures and Creep Damages in the HAZ of P91 Steel Weldment. Journal of Pressure Vessel Technology. 131 [2] (2009) 021406 10.1115/1.3028021
  9. Ryuji Sugiura, A. Toshimitsu Yokobori, Masaaki Tabuchi, Akio Fuji, Takeshi Adachi. Characterization of Structural Embrittlement of Creep Crack Growth for W-Added 12%Cr Ferritic Heat-Resistant Steel Related to the Multiaxial Stress. Journal of Engineering Materials and Technology. 131 [1] (2009) 011004 10.1115/1.3026544
2007
  1. 渡部 隆, 本郷 宏通, 山崎 政義, 田淵 正明. 異材溶接継手の高温強度特性と破壊形態. 鉄と鋼. 93 [8] (2007) 552-557 10.2355/tetsutohagane.93.552
  2. Ryuji Sugiura, A. Toshimitsu Jr. Yokobori, Shinjyu Takamori, Masaaki Tabuchi, Akio Fuji, Mitsuo Yoda, Kenichi Kobayashi, Takeo Yokobori. Effects of Alloying Additions and Material Microstructure on the Accuracy of the Predictive Law of Creep Crack Growth for W-Strengthened 9–12%Cr Ferritic Heat-Resistant Steel. MATERIALS TRANSACTIONS. 48 [11] (2007) 2928-2936 10.2320/matertrans.mra2007112
  3. Kota Sawada, Hideaki Kushima, Kazuhiro Kimura, Masaaki Tabuchi. TTP Diagrams of Z Phase in 9–12% Cr Heat-Resistant Steels. ISIJ International. 47 [5] (2007) 733-739 10.2355/isijinternational.47.733
  4. Ryuji Sugiura, Toshimitsu Yokobori, Jr., M. Arai, TABUCHI, Masaaki, Akio Fuji. Effect of embrittlement on creep crack growth rate for W-added 12Cr ferritic heat resistant steel concerning multi-axial stress and aging. STRENGTH, FRACTURE AND COMPLEXITY. 4 [4] (2007) 225-235
  5. R. Sugiura, A.T. Yokobori, M. Tabuchi, T. Yokobori. Comparison of creep crack growth rate in heat affected zone of welded joint for 9%Cr ferritic heat resistant steel based on C∗, dδ/dt, K and Q∗ parameters. Engineering Fracture Mechanics. 74 [6] (2007) 868-881 10.1016/j.engfracmech.2006.10.003
  6. ABE, Fujio, TABUCHI, Masaaki, Masayuki Kondo, Hirokazu Okada. Suppression of Type IV fracture in welded joints of advanced ferritic power plant steels - Effect of boron and nitrogen -. MATERIALS AT HIGH TEMPERATURES. 23 [4/3] (2007) 145-154
  7. Fujio Abe, Masaaki Tabuchi, Masayuki Kondo, Susumu Tsukamoto. Suppression of Type IV fracture and improvement of creep strength of 9Cr steel welded joints by boron addition. International Journal of Pressure Vessels and Piping. 84 [1-2] (2007) 44-52 10.1016/j.ijpvp.2006.09.013
2006
  1. TABUCHI, Masaaki, Jechang, HA, 横堀寿光. Creep Crack Growth Properties of Welded Joints for 12Cr Ferritic steel. STRENGTH, FRACTURE AND COMPLEXITY. 4 [1] (2006) 47-54
  2. 杉浦 隆次, 横堀 壽光, 高森 新樹, 田淵 正明, 富士 彰夫, 依田 満夫, 小林 謙一, 横堀 武夫. W添加9‐12%Crフェライト系耐熱鋼におけるクリープき裂成長寿命予測式の高精度化に及ぼす化学成分,材料組織の影響. 日本金属学会誌. 70 [5] (2006) 452-460 10.2320/jinstmet.70.452
  3. M. Kondo, M. Tabuchi, S. Tsukamoto, F. Yin, F. Abe. Suppressing type IV failure via modification of heat affected zone microstructures using high boron content in 9Cr heat resistant steel welded joints. Science and Technology of Welding and Joining. 11 [2] (2006) 216-223 10.1179/174329306x89260
  4. M Tabuchi, H Hongo, T Watanabe, AT Yokobori. Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel. Journal of ASTM International. 3 [5] (2006) 13226 10.1520/jai13226
  5. Shaju K. Albert, Matsui Masakazu, WATANABE, Takashi, HONGO, Hiromichi, KUBO, Kiyoshi, TABUCHI, Masaaki. Creep Behaviour of Weld Joints and Simulated HAZs of a High Cr Ferritic Steel. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS. 59 [1] (2006) 47-55
  6. Takashi Watanabe, Masaaki Tabuchi, Masayoshi Yamazaki, Hiromichi Hongo, Tatsuhiko Tanabe. Creep damage evaluation of 9Cr–1Mo–V–Nb steel welded joints showing Type IV fracture. International Journal of Pressure Vessels and Piping. 83 [1] (2006) 63-71 10.1016/j.ijpvp.2005.09.004
2004
  1. 渡部 隆, 山崎 政義, 本郷 宏通, 田淵 正明, 田辺 龍彦. 9Cr-1Mo-V-Nb鋼溶接継手の長時間クリープにおけるTypeIV破壊と微細組織. 鉄と鋼. 90 [4] (2004) 206-212 10.2355/tetsutohagane1955.90.4_206
  2. Hiromichi HONGO, Masayoshi YAMAZAKI, Takashi WATANABE, Masaaki TABUCHI, Tatsuhiko TANABE, Yoshio MONMA. Evaluation for Creep Properties of 316FR Weld Metal with Miniature Weld Metal and Full-Thickness Welded Joint Specimens. Journal of the Society of Materials Science, Japan. 53 [5] (2004) 566-571 10.2472/jsms.53.566
  3. TABUCHI, Masaaki, KONDO, MASAYUKI, KUBO, Kiyoshi, SHAJU, ALBERT. Improvement of Type IV Creep Cracking Resistance of 9Cr Heat Resisting Steels by Boron Addition. OPERATION MAINTENANCE AND MATERIALS ISSUES. 3 [3] (2004) 1-11
  4. KIMURA, Kazuhiro, YAMAZAKI, Masayoshi, TABUCHI, Masaaki. NIMSクリープデータシートプロジェクト 38年間の足跡と今後の展開. ふぇらむ. 9 [11] (2004) 816-820
  5. HONGO, Hiromichi, YAMAZAKI, Masayoshi, WATANABE, Takashi, TANABE, Tatsuhiko, TABUCHI, Masaaki, 門馬義雄. EVALUATION OF CREEP PROPERTIES FOR 316FR STEEL THICK PLATE WELDMENT USING MINIATURE CREEP SPECIMEN. ACTA METALLURGICA SINICA. 17 [4] (2004) 369-374
  6. TABUCHI, Masaaki, KONDO, MASAYUKI, WATANABE, Takashi, HONGO, Hiromichi, YIN, Fuxing, ABE, Fujio. Improvement of Type IV Cracking Resistance of 9Cr Heat Resisting Steel Weldment by Boron Addition. ACTA METALLURGICA SINICA. 17 [4] (2004) 331-337
  7. Masaaki Tabuchi, Jechang Ha, Hiromichi Hongo, Takashi Watanabe, Toshimitsu Yokobori. Experimental and numerical study on the relationship between creep crack growth properties and fracture mechanisms. Metallurgical and Materials Transactions A. 35 [6] (2004) 1757-1764 10.1007/s11661-004-0084-x
  8. T. Adachi, A.T. Yokobori, Jr, M. Tabuchi, A. Fuji, T. Yokobori, K. Nikbin. The proposal of <I>Q</I>* parameter and derivation of the law of creep crack growth life for a round bar specimen with a circular notch for Cr–Mo–V steel. Materials at High Temperatures. 21 [2] (2004) 95-100 10.3184/096034004782749962
  9. Jechang Ha, Masaaki Tabuchi, Hiromichi Hongo, A. Toshimitsu Yokobori, Akio Fuji. Creep crack growth properties for 12CrWCoB rotor steel using circular notched specimens. International Journal of Pressure Vessels and Piping. 81 [5] (2004) 401-407 10.1016/j.ijpvp.2004.03.011
  10. Takashi Watanabe, Masayoshi Yamazaki, Hiromichi Hongo, Masaaki Tabuchi, Tatsuhiko Tanabe. Effect of stress on microstructural change due to aging at 823 K in multi-layer welded joint of 2.25Cr–1Mo steel. International Journal of Pressure Vessels and Piping. 81 [3] (2004) 279-284 10.1016/j.ijpvp.2003.12.017
  11. S.K Albert, M Matsui, H Hongo, T Watanabe, K Kubo, M Tabuchi. Creep rupture properties of HAZs of a high Cr ferritic steel simulated by a weld simulator. International Journal of Pressure Vessels and Piping. 81 [3] (2004) 221-234 10.1016/j.ijpvp.2004.01.003
  12. F. Abe, M. Tabuchi. Microstructure and creep strength of welds in advanced ferritic power plant steels. Science and Technology of Welding and Joining. 9 [1] (2004) 22-30 10.1179/136217104225017107

書籍 TSV

2016
  1. TABUCHI, Masaaki. 耐熱鋼の高温破壊特性評価と高強度化. しなやかで強い鉄鋼材料−革新的構造用金属材料の開発最前線. 2016 , 369-377
  2. TABUCHI, Masaaki, Masato Yamamoto, Takashi Wakai, Masataka Yatomi, Yasutaka Noguchi, Norihiro Isobe, Yasuhiro Yamazaki, Shinichi Komazaki, Takumi Tokiyoshi, Sakaguchi Motoi, Hidetaka Nishida. 高温クリープおよびクリープ疲労き裂進展試験法標準. 2016 , 1-103
2014
  1. TABUCHI, Masaaki. 溶接継手のクリープ. 鉄鋼便覧. 2014 , 390-392
2011
  1. TABUCHI, Masaaki. き裂成長の評価および寿命予測技術. 環境・エネルギー材料ハンドブック. 2011 , 770-786
2006
  1. TABUCHI, Masaaki. 超鉄鋼. 超鉄鋼 (日刊工業新聞社版). 2006 , 123-134
  2. TABUCHI, Masaaki. 耐熱鋼および耐熱合金. 機械工学便覧(日本機械学会、丸善). 2006 , 65-67
2004
  1. TABUCHI, Masaaki. 3.2.4 Ni-15.5Cr-2.5Ti-0.7Al-1Nb-7Fe alloy. Creep Properties of Heat Rsistant Steels and Superalloys. 2004 , 345-347
  2. TABUCHI, Masaaki. 3.2.3 Ni-15.5Cr-8Fe alloy. Creep Properties of Heat Rsistant Steels and Superalloys. 2004 , 341-344
  3. TABUCHI, Masaaki. 3.3.2 Co-25Cr-10Ni-7.5W-B alloy. Creep Properties of Heat Rsistant Steels and Superalloys. 2004 , 362-365
  4. TABUCHI, Masaaki. 3.1.1 Fe-15Cr-26Ni-Mo-Ti-V alloy. Creep Properties of Heat Rsistant Steels and Superalloys(Springer社出版). 2004 , 319-322
  5. TABUCHI, Masaaki. 3.2.1 Ni-13Cr-4.5Mo-0.75Ti-6A(Nb+Ta)-Zr-B alloy. Creep Properties of Heat Rsistant Steels and Superalloys. 2004 , 331-335

会議録 TSV

2019
  1. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, MITARAI, Yoko, 伊藤勉. Creep behavior of commercially pure titanium at low and intermediate temperatures. Proceedings of EPRI-123 HiMAT Conference on Advances in High Temperature Materials. 2019, 1389-1394
2017
  1. Masato Mikami, TABUCHI, Masaaki, ABE, Fujio. Precipitates evolution during creep in advanced 9%Cr martensitic steel containing boron for turbine rotors. proceedings of 4th ECCC Creep & Fracture Conference 2017. 2017, 9999-1-9999-9
2016
  1. MATSUNAGA, Tetsuya, TABUCHI, Masaaki, HONGO, Hiromichi, SAHARA, Ryoji. Microstructure of Heat-Affected Zone in High-B 9Cr Steels. Proc. 9th China-Japan Bilateral Symposium on High Temperature Strength of Materials. 2016, 89-92
  2. SAWADA, Kota, HARA, Toru, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. EFFECT OF STRESS AND STRAIN ON MICROSTRUCTURAL CHANGES DURING LONG-TERM CREEP IN T91 STEEL. Proc. of 8th International Conference on Advances in Materials Technology. 2016, 459-466
  3. M. Mikami, T. Miyata, TABUCHI, Masaaki, ABE, Fujio. Development of 9Cr Steels for High Temperature Steam Turbine Rotors. Proceedings of 8th International Conference on Advances in Materials Technology . 2016, 791-802
  4. Toshihiro Ohtani, Takumi Honma, Yutaka Ishii, TABUCHI, Masaaki, HONGO, Hiromichi, Masahiko Hirao. Nonlinear Ultrasonic Change in High Cromium Ferritic Heat Resisting Steel Welded Joint During Creep. Electromagnetic Nondestructive Evaluation (XIX). 2016, 94-101
  5. HONGO, Hiromichi, MATSUNAGA, Tetsuya, TABUCHI, Masaaki. Long-term Creep Strength and Fracture of 9Cr Steel Welds. Proc. 9th China-Japan Bilateral Symposium on High Temperature Strength of Materials. 2016, 172-176
  6. Toshihiro Ohtani, Takumi Honma, Yutaka Ishii, Masaaki Tabuchi, Hiromichi Hongo, Masahiko Hirao. Change of nonlinear acoustics in ASME grade 122 steel welded joint during creep. AIP Conference Proceedings. 2016
  7. Tetsuya Matsunaga, Hidetoshi Somekawa, Hiromichi Hongo, Masaaki Tabuchi. Strain-Rate Sensitivity Enhanced by Grain-Boundary Sliding in Creep Condition for AZ31 Magnesium Alloy at Room Temperature. MATERIALS SCIENCE FORUM. 2016, 106-109
  8. SAHARA, Ryoji, MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. A first principles study of stabilizing mechanism by boron in body-centered cubic iron through (Fe,Cr)23(C,B)6 precipitates. A first principles study of stabilizing mechanism by boron in body-centered cubic iron through (Fe,Cr)23(C,B)6 precipitates. 2016, 919-921
  9. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. Abnormal steady state creep of Zircaloy-4. PRICM9 Proceedings. 2016, 714-716
  10. ABE, Fujio, TABUCHI, Masaaki, HAYAKAWA, Masao. Influence of Data Scattering on Estimation of 100,000 h Creep Rupture Strength of Alloy 617 and Alloy 740 by Larson-Miller Method. Proceedings of 8th International Conference on Advances in Materials Technology . 2016, 125-136
2014
  1. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep Strength of Dissimilar Welded Joints Using High B-9Cr Steel for A-USC Boiler. Proc. 10th Liege Conf. : Materials for Advanced Power Engineering 2014. 2014, 101-110
  2. SAWADA, Kota, KIMURA, Kazuhiro, TABUCHI, Masaaki. Effect of stress state on microstructural change during creep in Grade 92 steel welded joint. Proc.on 7th International Conference on Advances in Materials Technology for Fossil Power Plants. 2014, 607-614
  3. Mitsuharu Yonemura, Yasushi Hasegawa, Masaaki Igarashi, TABUCHI, Masaaki, ABE, Fujio. A New developed 9%Cr steel with high boron content achieving the long-term microstructural stability and the optimized mechanical properties for 625 oC USC power plant boiler. Advances in Materials Technology for Fossil Power Plants. 2014, 1329-1340
  4. ABE, Fujio, Toshiaki Horiuchi, SAKURAYA, Kazuyuki, Shigeru Suzuki, TABUCHI, Masaaki, TSUKAMOTO, Susumu. Characterization of boron and mechanisms for boron effects in 9Cr steel for A-USC boilers at 650 oC. Proceeding of MPA Seminar. 2014, 57-71
  5. TABUCHI, Masaaki, HONGO, Hiromichi. Creep Damage and Fracture in Weld Joints of High-Cr Steels . Proceedings of International Institute of Welding - International Welding Congress 2014 (IIW-IC2014). 2014, 407-412
  6. HONGO, Hiromichi, TABUCHI, Masaaki. Microstructural Changes and Type-IV Damage Evolutions During Creep in High Cr Ferritic Steel Welds. Proc. 10th Liege Conf.: Materials for Advanced Power Engineering 2014. 2014, 111-120
  7. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu. Alloy Design of Martensitic 9Cr-boron Steel for A-USC Boiler at 650 oC-Beyond Grades 91,92 and 122. Proceedings of International Conference on Energy Materials 2014. 2014, 129-136
  8. SAWADA, Kota, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. Change in 0.2% proof stress during creep and its effect on creep strength evaluation in high Cr ferritic steels. Proc. of 3rd International ECCC-Creep & Fracture Conference. 2014, 129-134
  9. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu. Alloy design for suppression of Type IV fracture in 9Cr steel welds at 650 oC. Proc. 10th Liege Conference: Materials for Advanced Power Engineering 2014. 2014, 91-100
2013
  1. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep strength of welded joints using high B-9Cr steel for advanced USC boiler. Proc. 8th Japan-China Bilateral Symposium on High Temperature Strength of Materials. 2013, 9999-1-9999-5
  2. Ruji Sugiura, A. Toshimitsu Yokobori, Jr., Kazuto Sato, TABUCHI, Masaaki, Kenichi Kobayashi, Masataka Yatomi, Kamran Nikbin. Creep Crack Initiation and Growth Behavior in Weldments of High Cr Steels. Proc. 13th International Conference on Fracture (ICF13). 2013, M07-002-1-M07-002-7
  3. Kimiaki Yoshida, Masataka Yatomi, TABUCHI, Masaaki, Kenichi Kobayashi. Creep Damage Evaluation for Fine Grained HAZ of Mod.9Cr Steels under Multi-Axial Stress Condition. Proc. ASME 2013 Pressure Vessels & Piping Division Conference. 2013, 97406-1-97406-7
  4. TABUCHI, Masaaki. Evaluation of Creep Damage and Fracture in High Cr Steel Welds. Proc. 13th International Conference on Fracture (ICF13). 2013, M07-006-1-M07-006-7
  5. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu, LIU, Yuan. Suppression of Type IV fracture in welds of 9Cr-boron steel for A-USC boilers. Proc. of 5th Symposium on Heat Resistant Steels and Alloys. 2013, 32-34
  6. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep Strength of Dissimilar Welds for Advanced USC Boiler Materials. Proc. 13th International Conference on Fracture (ICF13). 2013, S22-023-1-S22-023-7
  7. HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, SAKKA, Yoshio, TABUCHI, Masaaki. High-strain-rate superplasticity and tensile failure in cation-doped zirconia (Y-TZP). Proc. 8thJapan-China Bilateral Symposium 8thJapan-China Bilateral Symposium. 2013, 25-1-25-5
  8. TABUCHI, Masaaki, Ruji Sugiura, A. Toshimitsu Yokobori, Jr., Kenichi Kobayashi, Masataka Yatomi. Evaluation of Damage and Fracture of High Cr Steel Welds at Elevated Temperatures. Proc. 6th International HIDA Conference. 2013, S3-05-1-S3-05-12
  9. TSUKAMOTO, Susumu, LIU, Yuan, SHIRANE, Takahiro, TABUCHI, Masaaki, ABE, Fujio. Improvement of microstructure stability during creep in high Cr ferritic heat resistant steel HAZ. Proceedings of 9th International Conference on Trends in Welding Research. 2013, 1-10
  10. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu, LIU, Yuan. Modeling and Suppression of Type IV Fracture in 9Cr Steel Welds. Proc. of NIMS - MPA - IfWD Workshop on Modelling and Simulation. 2013, 9999-1-9999-23
  11. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep Strength of Dissimilar Weld using High B-9Cr steel for A-USC Boiler. Proc. ASME 2013 Pressure Vessels & Piping Conference. 2013, 1-5
2012
  1. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu, LIU, Yuan. Microstructure and creep life of simulated-HAZ specimens for welded joints of Gr.92 and 9Cr-boron steel at 650oC. 同会議プロシーディングス. 2012, 1-8
  2. SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro. Degradation Mechanism of Creep Strength Enhanced Ferritic Steels for Power Plants. Proc. of Workshop for Young Materials Scientists. 2012, 35-43
  3. Masataka Yatomi, TABUCHI, Masaaki, Kenichi Kobayashi, Toshimitsu Yokobori, Jr.. Creep Crack Growth Behaviour and Application of Fracture Mechanics Parameter to High Cr Steels. Creep and Fracture of Engineering Materials and Structures . 2012, C13-1-C13-4
2011
  1. Masataka Yatomi, TABUCHI, Masaaki, Kenichi Kobayashi. P91及びP92溶接部のクリープき裂進展特性について. 第49回高温強度シンポジウム講演論文集. 2011, 36-40
  2. Kenichi Kobayashi, Masahiro Kaneko, Hideo Koyama, Gavin C. Stratford, TABUCHI, Masaaki. Influence of Testing Environment and Radius of Die Shoulder on SP Creep Ruoture Life. Proc. of the ASME 2011 Pressure Vessels and Piping Conference. 2011, 57736-1-57736-7
  3. Kimiaki Yoshida, Masataka Yatomi, Yuta Tanaka, Keiji Kubushiro, TABUCHI, Masaaki, Kenichi Kobayashi. 多軸応力下における改良9Cr-1Mo鋼HAZ細粒域のクリープ損傷評価法. 第49回高温強度シンポジウム講演論文集. 2011, 71-75
  4. LIU, Yuan, TSUKAMOTO, Susumu, SAWADA, Kota, TABUCHI, Masaaki, ABE, Fujio. Microstructure evolution of Ac3 HAZ simulated 9%Cr heat resistant steels . Proc of HT-CMC7. 2011, 1-10
  5. TSUKAMOTO, Susumu, SHIRANE, Takahiro, LIU, Yuan, TABUCHI, Masaaki, ABE, Fujio. Microstructure control for prevention of type IV failure in high Cr heat resistant steel HAZ. Proc. of New High Temperature Materials Conf.. 2011, 1-11
2010
  1. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. Z-phase formation and its effect on long-term creep strength in 9-12%Cr creep resistant steels. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS. 2010, 117-122
  2. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu. Metallurgy of Type IV Fracture in Advanced Ferritic Power Plant Steels. Proceedings of the HIDA-5. 2010, 9999-1-9999-14
  3. Yukio Takahashi, TABUCHI, Masaaki. Creep and Creep-Fatigue Behavior of High Chromium Steel Weldment. Proc. 7th China-Japan Bilateral Symposium on High Temperature Strength of Materials. 2010, 19-25
  4. HONGO, Hiromichi, TABUCHI, Masaaki, WATANABE, Takashi, LIU, Yuan, TSUKAMOTO, Susumu. 高Cr鋼溶接継手におけるType-IV損傷の評価. Proceedings of the 48th Symposium on Strength of Materials at High Temperatures. 2010, 69-73
  5. TSUKAMOTO, Susumu, SHIRANE, Takahiro, LIU, Yuan, TABUCHI, Masaaki, ABE, Fujio. B添加による高Crフェライト系耐熱鋼溶接継手のクリープ特性改善. 創設50周年記念シンポジウム「溶接冶金研究の進歩とイノベーション」記念誌講演論文集. 2010, 139-142
  6. K Hiraga, B-N Kim, K Morita, H Yoshida, M Tabuchi. Cavitation failure during superplastic tensile loading in alumina-base ceramics. JOURNAL OF PHYSICS : CONFERENCE SERIES. 2010, 012145-1-012145-4
  7. HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro, SAKKA, Yoshio, TABUCHI, Masaaki. High-strain-rate superplasticity in oxide ceramics: a trial of microstructural design based on creep-cavitation mechanisms . Proc. 7th China-Jpn. Bilateral Symposium on High Strength of Mater. . 2010, 103-109
  8. TABUCHI, Masaaki, HONGO, Hiromichi. Evaluation of Long-Term Creep Damage in High Cr Ferritic Steel Welds. Proceedings of International HIDA-5 Conference . 2010, 1-12
  9. Kenichi Kobayashi, TABUCHI, Masaaki, Gavin C. Stratford. Creep Rupture Life of Welding Components in P92 Ferritic Steel using Small Punch Creep Test. METALLURGICAL JOURNAL. 2010, 54-58
  10. SAWADA, Kota, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. MICROSTRUCTURAL CHANGES OF T91 STEEL DURING CREEP UNDER LOW STRESS. Proc of 9th Liege conference on Materials for Advanced Power Engineering 2010. 2010, 172-177
  11. Ryuji Sugiura, A. Toshimitsu Yokobori, Jr., Kazuto Sato, TABUCHI, Masaaki, Masataka Yatomi, Kenichi Kobayashi. Creep Crack Initiation and Growth Characteristics in Weldment for P92 based on C*, dδ/dt, K and Q* Parameters. Proc. Int. Conf. on Fracture and Strength -From Physical to Holistic-. 2010, 14-14
  12. TABUCHI, Masaaki, HONGO, Hiromichi. Evaluation of Microstructures and Creep Damages in the High Cr Ferritic Steel Welds. Proc. 7th China-Japan Bilateral Symposium on High Temperature Strength of Materials. 2010, 244-249
2009
  1. TABUCHI, Masaaki, Toshimitsu Yokobori, Jr., Ryuji Sugiura, Masataka Yatomi, Akio Fuji, Kenichi Kobayashi. Results of Japanese Round Robin Program for Creep Crack Growth Using Gr.92 Steel Welds. Proc. of WELDS 2009. 2009, 9999(1)-9999(10)
  2. Ryuji Sugiura, Toshimitsu Yokobori, Jr., K. Suzuki, TABUCHI, Masaaki. Effect of Multi-axial Stress on the Life of Creep Crack Growth for Welded Joint of P92 Steel. Poceedings of 12th Int. Conf on Fracture (ICF12). 2009, 9999(1)-9999(11)
  3. F Abe, M Tabuchi, S Tsukamoto. Mechanisms for boron effect on microstructure and creep strength of ferritic power plant steels. ENERGY MATERIALS: MATERIALS SCIENCE AND ENGINEERING FOR ENERGY SYSTEMS. 2009, 166-175
  4. Masataka Yatomi, TABUCHI, Masaaki. Issues Relating to Numerical Modelling of Creep Crack Growth. Proc. of WELDS 2009. 2009, 9999(1)-9999(15)
  5. TABUCHI, Masaaki, HONGO, Hiromichi, SAWADA, Kota, Yukio Takahashi. Effect of Boron on Creep Strength of High Cr Steel Welds. Proc. Creep & Fracture in High Temperature Components. 2009, 227-237
  6. HONGO, Hiromichi, TABUCHI, Masaaki, TAKAHASHI Yukio. Microstructures and Type-IV creep damage of high Cr steel welds. JOURNAL OF SOLID MECHANICS AND MATERIALS ENGINEERING. 2009, 464-474
  7. SAWADA, Kota, FUJITSUKA, Masakazu, TABUCHI, Masaaki, KIMURA, Kazuhiro. Effects of microstructural change and oxidation on creep behavior of P23/T23 steels. Proc. of 2nd ECCC conference. 2009, 79-90
  8. TSUKAMOTO, Susumu, SHIRANE, Takahiro, LIU, Yuan, TABUCHI, Masaaki, TSUZAKI, Kaneaki, ABE, Fujio. Improvement of Creep Property in High Cr Heat Resistant Steel Welded Joint. Proc. of 3rd Symposium on Heat Resistant Steels and Alloys. 2009, 9999-9999
  9. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. Effect of Z-phase formation on creep strength and fracture of 9-12%Cr steels. Proc. of USC 2009. 2009, 20-32
  10. TABUCHI, Masaaki, HONGO, Hiromichi. Creep Damage Behavior of Welded Joints for High Cr Steels. Proc. 3rd Symposium on Heat Resistant Steels and Alloys for High Efficiency USC Power Plants 2009. 2009, 9999-9999
  11. HONGO, Hiromichi, TABUCHI, Masaaki, WATANABE, Takashi. P122鋼溶接継手の長時間クリープ損傷評価. 第53回日本学術会議材料工学連合講演会 講演論文集. 2009, 109-110
  12. SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro. Analysis of long-term creep curve by constitutive equations. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 2009, 190-194
  13. TSUKAMOTO, Susumu, TABUCHI, Masaaki, SHIRANE, Takahiro, ABE, Fujio. Prevention of Type IV Failure in High Cr Ferritic Heat Resistant Steek Welded Joint. Trends in Welding Research, Proceedings of the 8th International Conference. 2009, 296-302
  14. TABUCHI, Masaaki, HONGO, Hiromichi, WATANABE, Takashi, SAWADA, Kota, Yukio Takahashi. Evaluation of Type-IV Creep Damages in Thick Welded Joint for High Cr Steels. Proceedings 12th International Conference on Fracture. 2009, 9999-9999
2008
  1. KIMURA, Kazuhiro, TABUCHI, Masaaki, Yukio Takahashi, Kazuo Yoshida, YAGI, Koichi. Long-term Creep Strength and Strength Reduction Factor for Welded Joints of ASME Grades 91, 92 and 122 Type Steels. Proc. of SAFETY AND RELIABILITY OF WELDED COMPONENTS IN ENERGY AND PROCESSING INDUSTRY. 2008, 51-57
  2. Ryuji Sugiura, Toshimitsu Yokobori, TABUCHI, Masaaki. 溶接熱影響部におけるクリープき裂成長挙動に及ぼす局所応力多軸効果. 第52回材料強度と破壊総合シンポジウム論文集. 2008, 63-74
  3. HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro, TABUCHI, Masaaki. CAVITY FORMATION IN SUPERPLASTIC OXIDE CERAMICS. Proceedings of the 10th International Conference of the European Ceramic Society. 2008, 1245-1249
  4. TABUCHI, Masaaki. Evaluation and Prevention of Creep Damages in High Cr Steel Weld. Proc. International Institute of Welding, International Congress 2008 . 2008, 353-362
  5. TABUCHI, Masaaki. 高Cr鋼溶接部の組織とクリープ損傷の解析. 耐熱金属材料第123委員会研究報告. 2008, 369-378
  6. Masataka Yatomi, Akio Fuji, Kenichi Kobayashi, TABUCHI, Masaaki, Toshimitsu Yokobori, Yasushi Hasegawa, Takeo Yokobori. Creep Crack Growth of P92 welds. Proceedings of PVP2008. 2008, 61406-1-61406-8
  7. Catrin M. Davies, Robert C. Wimpory, TABUCHI, Masaaki, David W. Dean, Kamran M. Nikbin. The Influence of Specimen Geometory and Test Times on High Temperature Crack Growth Behaviour in Parent and Welded 316H Stainless Steel. Proceedings of PVP2008. 2008, 61502-1-61502-9
  8. SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro. Creep deformation behavior at long-term in P23/T23 steels. Proc. 7th Int. NIMS-MPA-IfW Workshop. 2008, 9999-9999
  9. ABE, Fujio, KIMURA, Kazuhiro, TABUCHI, Masaaki. NIMS Effort in Development of New Metallurgy in Heat Resistant Steels for Highly Efficient USC Power Plant. Proc. 7th Int. NIMS-MPA-IfW Workshop. 2008, 1-19
  10. TABUCHI, Masaaki. Evaluation of Creep Damages in HAZ of High Cr Steel Welds. Proc. of New High Temperature Materials Seminar. 2008, 9999-9999
2007
  1. Yukio Takahashi, TABUCHI, Masaaki. Failure Behavior of High Chromium Steel Welded Joints Under Creep and Creep-Fatigue Conditions. Proc. of 5th Int. Conf. on Advances in Materials Technology for Fossil Power Plants. 2007, 1-22
  2. ABE, Fujio, TABUCHI, Masaaki, SEMBA, HIROYUKI, Masaaki Igarashi, Mitsuru Yoshizawa, Nobuyoshi Komai, Akitsugu Fujita. FEASIBILITY OF MARBN STEEL FOR APPLICATION TO THICK SECTION BOILER COMPONENTS IN USC POWER PLANT AT 650oC. Proceedings of the Fifth International Conference on Advances in Materials Technology for Fossil Power Plant. 2007, 9999-1-9999-15
  3. SAWADA, Kota, Kenta Suzuki, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. Effect of Cr content and tempering temperature on precipitation behavior of Z phase in 9-12%Cr steels. Proc. of 33th MPA-Seminar 2007. 2007, 19.1-19.16
  4. TABUCHI, Masaaki, HONGO, Hiromichi, Yongkui Li, WATANABE, Takashi, SAWADA, Kota. Damage and life assessment of high Cr steel weldment. Proc. of 6th NIMS-MPA-IfW Workshop. 2007, 78-85
  5. HONGO, Hiromichi, TABUCHI, Masaaki, Yukio Takahashi. Mod.9Cr-1Mo鋼溶接継手のクリープ損傷挙動. 第45回高温強度シンポジウム 前刷集. 2007, 39-43
  6. Toshimitsu Yokobori, Jr., Ryuji Sugiura, D. Yoshino, TABUCHI, Masaaki, Yasushi Hasegawa. CHARACTERISTIC OF CRACK GROWTH LIFE FOR W ADDED 9CR FERRITIC HEAT RESISTANT STEEL UNDER THE CONDITIONS OF HIGH TEMPERATURE CREEP-FATIGUE MULTIPLICATION BASED ON NON-EQUILIBRIUM SCIENCE. Proceedings of PVP2007 2007 ASME Pressure Vessels and Piping Division Conference. 2007, 26741-1-26741-9
  7. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. TTP diagrams of Z phase in high Cr heat resistant steels. Proceedings of 6th NIMS-MPA-IfW workshop on Development and qualification of new materials for highly efficient USC power plant. 2007, 98-106
  8. TSUKAMOTO, Susumu, KONDO, MASAYUKI, TABUCHI, Masaaki, SHIRANE, Takahiro, ABE, Fujio. Suppression of Type IV Failure in High Cr Heat Resistant Steel Welded Joint . Proc. IIW. 2007, 9999-9999
  9. TABUCHI, Masaaki, HONGO, Hiromichi, LI, Yongkui, WATANABE, Takashi, Yukio Takahashi. EVALUATION OF MICROSTRUCTURES AND CREEP DAMAGES IN HAZ OF P91 STEEL WELDMENT. Proceedings of PVP2007 2007 ASME Pressure Vessels and Piping Division Conference. 2007, 26495-1-26495-6
  10. YAMAZAKI, Masayoshi, WATANABE, Takashi, HONGO, Hiromichi, TABUCHI, Masaaki. Creep Rupture Properties of Welded Joints of Heat Resistant Steels. Challenges of Power Engineering and EnvironmentProceeding of ICOPE 2007. 2007, 1044-1048
  11. Ryuji Sugiura, Toshimitsu Yokobori, Jr., Kazuto Suzuki, TABUCHI, Masaaki. Effect of multi-axial stress on the life of creep crack growth for welded joint of P92 steel.. Proc. 6th Japan-China Bilateral Symposium on High Temperature Strength of Materials. 2007, 143-147
  12. LI, Yongkui, HONGO, Hiromichi, TABUCHI, Masaaki, Yukio Takahashi, Yoshio Monma. Creep Damage Evaluation for Thick Welded Joint of Mod.9Cr-1Mo steel. Proceedings of 6th Japan-China Bilateral Symposium on High Temperature Strength of Materials. 2007, 149-154
2006
  1. Yoshinobu Komai, Akitsugu Fujita, Mitsuru Yoshizawa, Masaaki Igarashi, Hiroyuki Semba, TABUCHI, Masaaki, ABE, Fujio. 高B添加9Cr-3W-3Co-VNb鋼の溶接性(650oC級USCボイラ大径厚肉管用フェライト系耐熱鋼の開発−3). 日本学術振興会耐熱金属材料123委員会研究報告. 2006, 141-154
  2. HONGO, Hiromichi, YAMAZAKI, Masayoshi, WATANABE, Takashi, TABUCHI, Masaaki, Shaju K. Albert. EVALUATION OF LOCAL FLUCTUATION OF CREEP PROPERTIES IN WELDED JOINT OF 18Cr-12Ni-Mo-MEDIUM N-LOW C STEEL. Proceeding of the International Conference & Exhibition on Pressure Vessels and Piping. 2006, 1-10
  3. Mitsuru Yoshizawa, Masaaki Igarashi, Hiroyuki Semba, TABUCHI, Masaaki, ABE, Fujio, Yoshinobu Komai, Akitsugu Fujita. 高B添加9Cr-3W-3Co-VNb鋼の熱間加工性(650oC級USCボイラ大径厚肉管用フェライト系耐熱鋼の開発−2). 日本学術振興会耐熱金属材料123委員会研究報告. 2006, 131-140
  4. TABUCHI, Masaaki, HONGO, Hiromichi, Yukio Takahashi. Study on Type-IV damage prevention in high-temperature welded structure of next-generation reactor plants, PartII: Effect of bor. Proceedings of PVP2006 . 2006, 1-5
  5. TABUCHI, Masaaki, HONGO, Hiromichi, Yukio Takahashi. 高Cr耐熱鋼のHAZの組織とクリープ特性に及ぼすボロンの影響. 第44回高温強度シンポジウム前刷集. 2006, 149-153
  6. TABUCHI, Masaaki, Yukio Takahashi. Evaluation of Creep Strength Reduction Factors for Welded Joints of Modified 9Cr-1Mo Steel (P91). Proceedings of PVP2006 . 2006, 1-6
  7. TABUCHI, Masaaki, HONGO, Hiromichi, WATANABE, Takashi, KONDO, MASAYUKI, SHAJU, ALBERT. Microstructures and creep properties of weld joints of high Cr heat resisting steels. Proc. Ope2006. 2006, 1-11
  8. Yukio Takahashi, TABUCHI, Masaaki. Evaluation of Creep Strength Reduction Factors for Welded Joints of HCM12A (P122). Proceedings of PVP2006 . 2006, 1-6
  9. Hiroyuki Semba, TABUCHI, Masaaki, ABE, Fujio, Mitsuru Yoshizawa, Masaaki Igarashi, Yoshinobu Komai, Akitsugu Fujita. 高B添加による9Cr耐熱鋼の長時間クリープ強度向上(650℃級USC大径厚肉管用フェライト系耐熱鋼の開発−1). 耐熱金属材料123委員会研究報告書. 2006, 115-130
  10. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. Creep strength degradation by Z phase formation in 9-12%Cr heat resistant steels. Proc. the 3rd International Conference on Advanced Structural Steels. 2006, 532-537
2005
  1. TABUCHI, Masaaki, Jechang, HA, 横堀寿光. Creep Crack Growth Properties of Welded Joints for High Cr Ferritic Steel. Proc. of 11th International Conference on Fracture. 2005, -
  2. A.T. Yokobori, Jr., R. Sugiura, TABUCHI, Masaaki, A. Fuji, T. Adachi, T. Yokobori. The effect of multi-axial stress component on creep crack growth rate concerning structural brittleness. Proc. of ICF11. 2005, -
  3. Je Chang Ha, Joon Hyun Lee, TABUCHI, Masaaki, A. Toshimitsu Yokobori. Estimation of Creep Crack Growth Properties using Circumferential Notched Round Bar Specimen for 12CrWCoB Rotor Steel. KEY ENGINEERING MATERIALS. 2005, 397-402
  4. WATANABE, Takashi, TABUCHI, Masaaki, YAMAZAKI, Masayoshi, HONGO, Hiromichi. Creep damage evaluation of 9Cr-1Mo-V-Nb steel welded joint showing Type IV fracture. Proc. of. WELDS 2005. 2005, 59-59
  5. 高橋由起夫, 猪狩敏秀, 川島扶美子, 伊達新吾, 磯部展宏, 伊藤拓哉, 野口泰隆, 小林謙一, TABUCHI, Masaaki. High-Temperature Crack Growth Behavior of High-Chromium Steels. Proc of SMiRT18. 2005, 1-12
  6. TSUKAMOTO, Susumu, SHIMIZU, MASATSUGU, KONDO, MASAYUKI, TABUCHI, Masaaki, ABE, Fujio. Improvement of Long-Term Creep Strength in High Cr Heat Resistant Steel Welded Joint. Proc. ATS2005. 2005, 298-299
2004
  1. KONDO, MASAYUKI, TABUCHI, Masaaki, TSUKAMOTO, Susumu, YIN, Fuxing, ABE, Fujio. SUPPRESSION OF TYPE IV FAILURE IN HIGH-B LOW-N 9Cr-3W-3Co-NbV STEEL WELDED JOINT. Proc. of 4th International Conference on Advances in Materials Technology for Fossil Power Plants. 2004, 1-12
  2. 杉浦隆次, 横堀寿光, TABUCHI, Masaaki, Jechang, HA, 足立岳志. The Measurement and Estimation of Creep Crack Growth of a Round Bar Specimen with Circular Notch for 12Cr Ferritic Heat Resistan. Proc. of 1st Int. Sympo. on Mechanical Science Based on Nanotechnology. 2004, 187-194
  3. KONDO, MASAYUKI, TABUCHI, Masaaki, TSUKAMOTO, Susumu, YIN, Fuxing, ABE, Fujio. Improvement of weld creep life by high-B low-N 9Cr-3W-3Co-NbV steel. Second International Conference on Advanced Structural Steels. 2004, 834-837
  4. ABE, Fujio, TABUCHI, Masaaki, SAWADA, Kota, KURODA, Seiji, OKADA, Koichi, MUNEKI, Seiichi. Development of Advanced 9Cr Steels for Thick Section Boiler Components of USC Power Plant at 650oC. Proceedings of 2nd International Conference on Advanced Structural Steels. 2004, 757-760
  5. SHAJU, ALBERT, 松井正数, KUBO, Kiyoshi, HONGO, Hiromichi, TABUCHI, Masaaki. Study of TypeIV Cracking in Ferritic Steel Welds Using HAZs Simulated by Heat Treatment and Gleeble. Thermo-Mechanical Simulation and Processing of Steels. 2004, 377-390
  6. TABUCHI, Masaaki, KONDO, MASAYUKI, WATANABE, Takashi, HONGO, Hiromichi, YIN, Fuxing, ABE, Fujio. Improvement of TypeIV Cracking Resistance of 9Cr Heat Resisting Steel Weldment by Boron Addition. Proc. 5th China-Japan Bilateral Symposium on High Temperature Strength of Materials. 2004, 240-245
  7. TABUCHI, Masaaki, KONDO, MASAYUKI, KUBO, Kiyoshi, SHAJU, ALBERT. Improvement of Type IV Creep Cracking Resistance of 9Cr Heat Resisting Steels by Boron Addition. Proc. of HIDA4 Conference. 2004, 1-9
  8. HONGO, Hiromichi, YAMAZAKI, Masayoshi, WATANABE, Takashi, TANABE, Tatsuhiko, TABUCHI, Masaaki, 門馬義雄. EVALUATION OF CREEP PROPERTIES FOR 316FR STEEL THICK PLATE WELDMENT USING MINIATURE CREEP SPECIMEN. Proc. 5th China-Japan Bilateral Symposium on High Temperature Strength of Materials. 2004, 80-85
  9. TABUCHI, Masaaki. Improvement of Creep Strength for 9Cr Steel Weldment by Boron Addition. NIMS-MPA Workshop 2004. 2004, 31-38
  10. ABE, Fujio, TABUCHI, Masaaki, KONDO, MASAYUKI, TSUKAMOTO, Susumu. Improvement of Creep Strength of Advanced Ferritic Steel Welded Joints. IIW 2004 Osakaプロシーディングス. 2004, -
  11. SEMBA, HIROYUKI, KONDO, MASAYUKI, TABUCHI, Masaaki, ABE, Fujio. Development of Creep and TypeIV Resistant 9%Cr Steel Containing High Boron for USC Boilers. PROCEEDINGS of 21st International Pittsburgh Coal Conference. 2004, 1-9

口頭発表 TSV

2019
  1. IZUNO, Hitoshi, DEMURA, Masahiko, YAMAZAKI, Masayoshi, TABUCHI, Masaaki, 阿部 大輔, 鳥形 啓輔. Prediction of Creep Rupture Time for Weld Joints of 2 1/4Cr-1Mo Steel. MATERIALS RESEARCH MEETING 2019. 2019
  2. 田淵 正明. VAMAS TWA31の活動状況 -ISO 規格化を目指して-. 日本学術振興会 先端材料強度129委員会. 2019
  3. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. Creep Lifetime Prediction of Ferritic Steels by Larson-Miller Parameter. 10th Japan-China Bilateral Symposium on High Temperature Strength of Materials. 2019
  4. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, MITARAI, Yoko, 伊藤 勉. Creep behavior of commercially pure titanium at low and intermediate temperature. Joint EPRI-123HiMAT Conference 2019. 2019
  5. ABE, Fujio, OHBA, Toshio, MIYAZAKI, Hideko, TODA, Yoshiaki, TABUCHI, Masaaki. Effect of boron nitrides and aluminum nitrides on long-term creep life and rupture ductility of martensitic 9 to 12Cr steels. EPRI-123HiMAT International Conference on Advances in High Temperature Materials. 2019
  6. ABE, Fujio, OHBA, Toshio, MIYAZAKI, Hideko, TODA, Yoshiaki, TABUCHI, Masaaki. Effect of boron nitrides and aluminum nitrides on long-term creep life and rupture ductility of martensitic 9 to 12Cr steels. EPRI-123HiMAT International Conference on Advances in High Temperature Materials. 2019
  7. TABUCHI, Masaaki. Creep strength and fracture of Gr.91 and Gr.92 steel welds. 13th International NIMS-MPAS-IfWD workshop. 2019
  8. 伊津野 仁史, 出村 雅彦, 山崎 政義, 田淵 正明, 阿部大輔, 鳥形啓輔. 2.25Cr 1Mo 耐熱鋼溶接部のクリープ寿命予測 モデルの検討. 日本金属学会 2019年秋季大会. 2019
  9. 阿部 冨士雄, 大場 敏夫, 宮崎 秀子, 戸田 佳明, 田淵 正明. W-Moバランス9Cr鋼のクリープ寿命および破断延性に及ぼすクリープ変形挙動の影響. 日本鉄鋼協会 令和元年 秋季講演大会. 2019
  10. 松永 哲也, ソイシ マオウイア, 佐原 亮二, 田淵 正明. 原子分解能電子顕微鏡及び第一原理計算を用いた微視組織安定性評価. 第7回構造材料研究拠点シンポジウム. 2019
  11. 田淵 正明, 本郷 宏通, 松永 哲也. 9Cr耐熱鋼の溶接継手の長時間クリープ強度と破壊. 第7回構造材料研究拠点シンポジウム. 2019
  12. TABUCHI, Masaaki. Strength and fracture of high Cr steel welds at high temperatures. Asia Pacific Society for Materials Research Anual Meeting 2019. 2019
  13. DEMURA, Masahiko, IZUNO, Hitoshi, TABUCHI, Masaaki. Materials Integration approach for creep damage prediction of heat-resistant steel’s weld joint. 5th World Congress on Integrated Computational Materials Engineering (ICME2019). 2019
  14. TABUCHI, Masaaki. Current activities and new proposal of international standard of VAMAS TWA31 . VAMAS SC44(第44回VAMAS運営会議). 2019
  15. TABUCHI, Masaaki. Round robin testing under creep/fatigue conditions. VAMAS TWA31 meeting(VAMAS 作業部会31 国際会議). 2019
  16. 田淵 正明. 耐熱鋼溶接部のクリープ損傷. 日本材料学会 X線材料強度部門委員会. 2019
  17. IZUNO, Hitoshi, DEMURA, Masahiko, TABUCHI, Masaaki, 本武 陽一, OKADA, Masato. Creep Model Selection for Grade 91 Steel Using Data Scientific Method. The International Conference on Computational & Experimental Engineering and Science (ICCES 2019). 2019
  18. 佐原 亮二, ソイシ マオウイア, 松永 哲也, Marcel H. F. Sluiter, 田淵 正明, M. J. Mills. A new understanding of complex carbides formation in creep resistant chromium steels . 第3回MI2I全体会議. 2019
2018
  1. 佐原 亮二, ソイシ マオウイア, M. H. F. Sluiter, 松永 哲也, 田淵 正明, M. J. Mills. クリープ特性向上を目指した耐熱鋼中炭化物の相安定性解明の新展開. ポスト「京」重点課題(7) 第4回シンポジウム. 2018
  2. 佐原 亮二, ソイシ マオウイア, M. H. F. Sluiter, 松永 哲也, M. J. Mills, 田淵 正明. クリープ特性向上を目指した耐熱鋼中炭化物の相安定性解明の新展開. ポスト「京」重点課題(7) 「次世代の産業を支える新機能デバイス・ 高性能材料の創成(CDMSI)」第4回シンポジウム. 2018
  3. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SOUISSI, Maaouia, SAHARA, Ryoji. B添加9Cr-1Mo鋼におけるM23C6の安定性に対する組成と構造の影響. 第56回高温強度シンポジウム. 2018
  4. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, ITO, Tsutomu, MITARAI, Yoko. 低温領域における純チタンのクリープ挙動. 第6回「チタン若手研究者・技術者交流会」. 2018
  5. ABE, Fujio, OHBA, Toshio, MIYAZAKI, Hideko, TODA, Yoshiaki, TABUCHI, Masaaki. Long-term creep strength and rupture ductility of W-Mo-balanced 9Cr steel. 44th MPA-Seminar. 2018
  6. TABUCHI, Masaaki. Creep strength and fracture of Gr.91 and Gr.92 steel welds. The 1st International 9%Cr CSFE Steels Conference. 2018
  7. SOUISSI, Maaouia, Marcel H. F. Sluiter, MATSUNAGA, Tetsuya, TABUCHI, Masaaki, Michael J. Mills, SAHARA, Ryoji. A NEW UNDERSTANDING OF COMPLEX CARBIDES FORMATION IN CREEP RESISTANT CHROMIUM STEELS. TOFA 2018. 2018
  8. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SOUISSI, Maaouia, SAHARA, Ryoji. ボロン添加9%クロムフェライト鋼中のM23C6析出物の安定性. 日本鉄鋼協会第176回秋季講演大会. 2018
  9. ABE, Fujio, OHBA, Toshio, MIYAZAKI, Hideko, TODA, Yoshiaki, TABUCHI, Masaaki. 9Cr鋼の長時間クリープ強度および破断延性に及ぼすW-Moバランスの効果. 日本鉄鋼協会H30年秋季講演大会. 2018
  10. SAHARA, Ryoji, SOUISSI, Maaouia, M. H. F. Sluiter, MATSUNAGA, Tetsuya, TABUCHI, Masaaki, M. J. Mills. Phase stability of carbide γ-M23C6 with M=Cr and Fe. ACCMS-TM 2018. 2018
  11. MATSUNAGA, Tetsuya, SOUISSI, Maaouia, SAHARA, Ryoji, HONGO, Hiromichi, TABUCHI, Masaaki, Wei Zhang, Michael J Mills. Creep Property of Boron added 9Cr Heat Resistant Steels after Welding. THERMEC’2018. 2018
  12. Masato MIKAMI, TABUCHI, Masaaki, ABE, Fujio. ボロン添加9%Cr鋼の長時間時効後の組織変化. 日本学術振興会 耐熱金属材料第123委員会 H30年7月期研究会. 2018
  13. SAHARA, Ryoji, SOUISSI, Maaouia, M. H. F. Sluiter, MATSUNAGA, Tetsuya, TABUCHI, Masaaki, M. J. Mills. 耐熱鋼中の炭化物γ-M23C6の相安定性解析. ポスト「京」重点課題(7)サブ課題E「高信頼性構造材料」 H30年度第一. 2018
  14. TABUCHI, Masaaki. Current activities of VAMAS TWA31 for creep/fatigue crack growth of high temperature alloys. VAMAS SC43 (VAMAS第43回運営会議). 2018
  15. TABUCHI, Masaaki, HONGO, Hiromichi, MATSUNAGA, Tetsuya. Gr.91鋼溶接継手の長時間クリープ強度と破壊. 日本材料強度学会 総会学術講演会. 2018
  16. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SOUISSI, Maaouia, SAHARA, Ryoji. ボロンを含んだ9Cr-1Mo鋼のM23C6析出物の成長挙動. 第67期通常総会・学術講演会. 2018
  17. TABUCHI, Masaaki. Damage and fracture of high Cr steel welds at high temperature. 13th Conference on high temperature materials and strengths. 2018
  18. SAHARA, Ryoji, SOUISSI, Maaouia, BHATTACHARYA, Somesh Kumar, Marcel Sluiter, MATSUNAGA, Tetsuya, TABUCHI, Masaaki, Kyosuke Ueda, Takayuki Narushima. 第一原理計算による耐熱材料設計. ナノ学会第16会大会. 2018
  19. TABUCHI, Masaaki. 高クロム耐熱鋼の溶接部の長時間クリープ強度と破壊. 第60回材料強度と破壊総合シンポジウム. 2018
  20. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SOUISSI, Maaouia, SAHARA, Ryoji, Wei Zhang, Michael J Mills. Stability of M23C6 precipitate in 9Cr heat resistant steel. MINS-NU workshop. 2018
  21. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. ジルカロイ4の特異な高温クリープ挙動. 2018年春季講演大会. 2018
  22. HAYAKAWA, Masao, TABUCHI, Masaaki, ABE, Fujio, KIMURA, Megumi, MAEDA, Yoshio. A-USC用耐熱合金のクリープ疲労特性の解明(三島賞受賞講演). 日本鉄鋼協会第175回春季講演大会. 2018
  23. KOIWA, Kozo, TABUCHI, Masaaki, DEMURA, Masahiko, YAMAZAKI, Masayoshi, WATANABE, Makoto. 9Cr-1Mo-V-Nb耐熱鋼溶接継手のクリープ破断寿命予測シミュレーション. MI・計測 合同シンポジウム. 2018
2017
  1. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji, SOUISSI, Maaouia, Mike Mills. 9Cr-1Mo鋼におけるM23C6析出物の様相変化に対するボロンの影響. 高温強度・破壊力学合同シンポジウム. 2017
  2. TABUCHI, Masaaki. 高温破壊力学試験法の国際標準化−横堀武夫委員長を偲んで−. 日本学術振興会 先端材料強度129委員会. 2017
  3. SOUISSI, Maaouia, MATSUNAGA, Tetsuya, SAHARA, Ryoji, Marcel.H.F. Sluiter, TABUCHI, Masaaki, Micheal J. Mills. Effect of metal site occupancy in the stability of Cr23-xFexC6 (x=0-23) carbide phases. JSPS 172th Committee for phase diagram of alloys. 2017
  4. SOUISSI, Maaouia, MATSUNAGA, Tetsuya, SAHARA, Ryoji, Marcel H.F. Sluiter, TABUCHI, Masaaki, M. J. Mills. Effect of metal site occupancy in the stability of Cr23-xFexC6 (x=0-23) carbide phases. NIMS WEEK 2017. 2017
  5. KOIWA, Kozo, TABUCHI, Masaaki, DEMURA, Masahiko, YAMAZAKI, Masayoshi, WATANABE, Makoto. Prediction of creep rupture time by creep damage analysis in 9Cr-1Mo-V-Nb steel weldment. NIMS WEEK 2017 day2. 2017
  6. KOIWA, Kozo, TABUCHI, Masaaki, DEMURA, Masahiko, YAMAZAKI, Masayoshi, WATANABE, Makoto. Creep rupture time prediction by damage analysis in 9Cr-1Mo-V-Nb steel weldment. NIMS WEEK 2017 day1. 2017
  7. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. ジルカロイ4の2段定常クリープ. 高温変形の組織ダイナミクス研究会. 2017
  8. TABUCHI, Masaaki, MATSUNAGA, Tetsuya, HONGO, Hiromichi. クリープ性能予測システムの開発. 日本金属学会2017年秋期講演大会. 2017
  9. KOIWA, Kozo, TABUCHI, Masaaki, DEMURA, Masahiko, YAMAZAKI, Masayoshi, WATANABE, Makoto. 9Cr-1Mo-V-Nb鋼溶接継手のクリープ損傷解析による損傷則の特徴の抽出. 日本金属学会2017年秋季講演大会(第161回). 2017
  10. IZUNO, Hitoshi, DEMURA, Masahiko, TABUCHI, Masaaki, Youichi, Mototake, Masato, Okada. データ科学を活用した改良9Cr-1Mo鋼におけるクリープ曲線予測. 日本金属学会 2017年秋季大会. 2017
  11. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SOUISSI, Maaouia, SAHARA, Ryoji, Michael J Mills. ボロン添加9%クロムフェライト鋼におけるクリープ中の析出物の様相変化. 第174回秋季講演大会. 2017
  12. SOUISSI, Maaouia, MATSUNAGA, Tetsuya, SAHARA, Ryoji, Marcel H.F. Sluiter, TABUCHI, Masaaki, Michael J. Mills. Effect of metal site occupancy in the stability of Cr23-xFexC6 (x=0-23) carbide phases. ACCMS9. 2017
  13. TABUCHI, Masaaki. 耐熱鋼と溶接部の長時間クリープ強度. 日本鉄鋼協会 設備技術部会大会. 2017
  14. SOUISSI, Maaouia, MATSUNAGA, Tetsuya, SAHARA, Ryoji, Marcel H.F. Sluiter, TABUCHI, Masaaki, M.J. Mills. Role of non-random metal site occupation in the formation stability of Cr23-xFexC6 (x = 0-3) carbide phases by high resolution TEM and ab initio calculations. CREEP 2017. 2017
  15. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SOUISSI, Maaouia, SAHARA, Ryoji, H. C. Whitt, T. K. Payton, Wei Zhang, M. J. Mills. Creep and Microstructure in High-Boron 9% Chromium Heat Resistant Steel. 14th Int'l Conf on Creep2017. 2017
  16. KOIWA, Kozo, TABUCHI, Masaaki, DEMURA, Masahiko, Takaaki Matsuoka, Keisuke Torigata, YAMAZAKI, Masayoshi, WATANABE, Makoto. Creep damage calculation of weld joint of 9Cr-1Mo-V-Nb steel tube for creep lifetime prediction. ICME2017. 2017
  17. TABUCHI, Masaaki. Long-term creep strength and fracture of Gr.91 steel welds. HIDA-7. 2017
  18. TABUCHI, Masaaki. 溶接継手のクリープ強度. 第4回NIMS構造材料研究拠点シンポジウム. 2017
  19. SOUISSI, Maaouia, SAHARA, Ryoji, Marcel H. F. Sluiter, MATSUNAGA, Tetsuya, TABUCHI, Masaaki. First-principles study of stability of Gamma-Cr23-xFexC6 precipitates: The effect of metal site occupancy. JIM spring meeting 2017. 2017
  20. KOIWA, Kozo, TABUCHI, Masaaki, Nobutaka Nishikawa, WATANABE, Makoto, DEMURA, Masahiko. PREDICTION OF CREEP LIFETIME OF WELD JOINT OF 9CR-1MO-V-NB STEEL TUBE BY CREEP DAMAGE CALCULATION. International conference on Plasticity, Damage and Fracture 2017. 2017
2016
  1. SOUISSI, Maaouia, SAHARA, Ryoji, Marcel H.F. Sluiter, MATSUNAGA, Tetsuya, TABUCHI, Masaaki. First-principles study of stability of gamma-Cr23-xFexC6 precipitates: The effect of metal site occupancy. ACCMS-VO11. 2016
  2. TABUCHI, Masaaki. 高Cr鋼溶接継手の長時間クリープ強度. 日本学術振興会第129委員会. 2016
  3. Takahiro Tsukamoto, Shin-ichi Komazaki, TABUCHI, Masaaki, HONGO, Hiromichi. 高Crフェライト系耐熱鋼溶接継手部のクリープに伴う水素放出特性の変化. 第54回高温強度シンポジウム. 2016
  4. TABUCHI, Masaaki. Creep and creep crack growth properties for A-USC materials. VAMAS TWA31 Committee. 2016
  5. KOIWA, Kozo, TABUCHI, Masaaki, DEMURA, Masahiko, Takaaki Matsuoka, Keisuke Torigata, YAMAZAKI, Masayoshi, WATANABE, Makoto. クリープ損傷解析を用いた9Cr-1Mo-V-Nb鋼溶接継手の破断寿命の予測. SIP「革新的構造材料」マテリアルズインテグレーションシンポジウム. 2016
  6. HAYAKAWA, Masao, TABUCHI, Masaaki, ABE, Fujio, MAEDA, Yoshio. Creep-fatigue Properties of Dissimilar Welded Joints for A-USC. 第9回日中高温強度シンポジウム. 2016
  7. TABUCHI, Masaaki. B添加9Cr鋼研究の最新動向. 日本材料学会 高温強度部門委員会. 2016
  8. HAYAKAWA, Masao, TABUCHI, Masaaki, ABE, Fujio, MAEDA, Yoshio. A-USC用耐熱合金の異材継手のクリープ疲労特性. 第3回NIMS構造材料研究拠点シンポジウム. 2016
  9. TABUCHI, Masaaki. A-USCボイラ用異材溶接継手のクリープ強度. 学振129委員会第2・3合同分科会. 2016
  10. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu. 火力発電用高強度フェライト系耐熱鋼のクリープ強度と溶接部強度劣化防止. 日本学術振興会 将来加工技術第136委員会. 2016
  11. MATSUNAGA, Tetsuya, SOMEKAWA, Hidetoshi, HONGO, Hiromichi, TABUCHI, Masaaki. 微細粒を有する純マグネシウムの室温超塑性. 第160回超塑性研究会. 2016
  12. M. Mikami, T. Miyata, TABUCHI, Masaaki, ABE, Fujio. 蒸気タービンロータ用ボロン添加9%Cr鋼の開発. 学振 耐熱金属材料第123委員会H28年7月期研究会. 2016
  13. TABUCHI, Masaaki. Research Activities in Materials Reliability Field. 2016 MOST-NIMS Workshop. 2016
  14. TABUCHI, Masaaki, HAYAKAWA, Masao, MATSUNAGA, Tetsuya, ABE, Fujio. 異材溶接継手の損傷解析および長時間クリープ強度評価. A-USC成果報告会. 2016
  15. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. クリープに伴う高B-9Cr鋼異材溶接継手の硬さ変化. 第65期学術講演会. 2016
  16. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji. 溶接を施した高ボロン9%クロムフェライト鋼のクリープ強度と組織の関係. 第171回春季講演大会. 2016
  17. TABUCHI, Masaaki. 初期欠陥による破損寿命およびき裂潜伏時間の算出. 日本高圧力技術協会 圧力設備維持規格分科会. 2016
  18. TABUCHI, Masaaki. 高Cr鋼溶接部の長時間クリープ強度と破壊. 日本鉄鋼協会 高強度耐熱鋼WG 設備診断・寿命評価TF. 2016
  19. TABUCHI, Masaaki. 高B-9Cr鋼溶接部の組織とクリープ強度. 日本鋳鍛鋼(株) 講演会. 2016
2015
  1. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji. 9Cr鋼における細粒熱影響部形成の抑制に対するボロンの効果. 第53回高温強度シンポジウム. 2015
  2. TABUCHI, Masaaki. Creep Damage Evaluation of Welded Joins for USC and A-USC Boiler. 10th International EPRI Creep-Fatigue Experts Workshop. 2015
  3. HAYAKAWA, Masao, TABUCHI, Masaaki, ABE, Fujio, MAEDA, Yoshio. Creep-fatigue Properties of Dissimilar Welded Joints for A-USC Boiler. 10th International EPRI Creep-Fatigue Experts Workshop. 2015
  4. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji. 9%クロムフェライト鋼におけるボロン添加による溶接組織変化. 第170回秋季講演大会. 2015
  5. SAWADA, Kota, HARA, Toru, TABUCHI, Masaaki, KIMURA, Kazuhiro. T91鋼の長時間クリープに伴う変形抵抗の変化. 日本鉄鋼協会第170回秋季講演大会. 2015
  6. ABE, Fujio, TABUCHI, Masaaki, HAYAKAWA, Masao. TTP法によるAlloy 617の700 oC, 10万時間クリープ破断強度評価. 日本鉄鋼協会 H27年 秋季演大会. 2015
  7. HAYAKAWA, Masao, TABUCHI, Masaaki, ABE, Fujio, MAEDA, Yoshio. 高温機器用ニッケル合金及び異材溶接継手のクリープ疲労特性と溶接構造用圧延鋼の高サイクル疲労特性の評価. グリーンマテリアルフォーラムシンポジウム「インフラ構造物の劣化と. 2015
  8. TABUCHI, Masaaki, HONGO, Hiromichi, MATSUNAGA, Tetsuya, ABE, Fujio. A-USCボイラ用異材溶接継手のクリープ強度. 日本機械学会 2015年度年次大会. 2015
  9. SAHARA, Ryoji, MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. Theoretical investigation of stabilizing mechanism by boron in bcc iron through (Fe,Cr)23(C,B)6 precipitates. Psi-k 2015. 2015
  10. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji. 9Cr鋼の溶接熱影響部に対するボロンと窒素の影響. 高温変形の組織ダイナミクス研究会. 2015
  11. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji. Microstructure of Welded 9 Pct Chromium Steel with Boron. CREEP 2015. 2015
  12. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. 9Cr鋼溶接部における細粒HAZ組織形成の抑制に対するボロンの効果. 第64期通常総会・学術講演会. 2015
  13. TABUCHI, Masaaki. 耐熱鋼溶接部のクリープ損傷評価と長寿命化に関する研究. 第58回材料強度と破壊総合シンポジウム. 2015
  14. SAHARA, Ryoji, MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. 第一原理計算によるbcc Fe/M23C6界面の電子状態および安定性. 日本金属学会2015年春期大会. 2015
  15. TABUCHI, Masaaki. 耐熱鋼溶接部のクリープ損傷と破壊に関する研究. 日本鉄鋼協会 第169回春季講演大会. 2015
  16. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji. 9Crフェライト系耐熱鋼溶接部に対するボロンの影響. 2015年春期(第156回)講演大会. 2015
  17. TABUCHI, Masaaki. USCおよびA-USC用材料に関するVAMAS第31部会日本グループの活動の現状と将来計画. VAMAS TWA31 meeting. 2015
  18. TABUCHI, Masaaki. 9Cr鋼および316FR鋼溶接継手のクリープ損傷と強度. 日本保全学会 材質劣化分科会. 2015
2014
  1. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, Satoh Yuhki, Abe Hiroaki. ジルカロイ4のクリープに対する固溶水素の影響. 第52回高温強度シンポジウム. 2014
  2. SAWADA, Kota, HARA, Toru, TABUCHI, Masaaki, KIMURA, Kazuhiro, Keiji Kubushiro, Yasuko Masuda. 改良9Cr-1Mo鋼の繰返し加熱による組織変化 その2. 日本鉄鋼協会第168回秋季講演大会. 2014
  3. TABUCHI, Masaaki. Improvement of Creep Strength for High Cr Steel Weldment. 東北大学エネルギー安全科学国際研究センター50周年記念講演会. 2014
  4. SAWADA, Kota, HARA, Toru, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. ASME Grade 91鋼のクリープ強度のヒート間差と組織変化. 日本金属学会 高温強度と組織形成の材料科学研究会. 2014
  5. TABUCHI, Masaaki. 高クロム鋼溶接部のクリープ損傷と破壊の評価. 日本学術振興会 先端材料強度129委員会. 2014
  6. Kimiaki Yoshida, Masataka Yatomi, TABUCHI, Masaaki, Ken-ichi Kobayashi. 多軸応力下における改良9Cr-1Mo鋼のクリープ寿命評価法. 日本材料学会 第63期学術講演会. 2014
  7. Toshihiro Ohtani, Yuuki Kusanagi, Yutaka Ishii, TABUCHI, Masaaki, HONGO, Hiromichi, Masahiko Hirao. 高Cr 鋼溶接継手部のクリープ損傷中の非線形超音波の変化. 日本材料学会 第63期学術講演会. 2014
  8. Kimiaki Yoshida, Masataka Yatomi, TABUCHI, Masaaki, Ken-ichi Kobayashi. Creep Life Prediction for Mod. 9Cr-1Mo Steels under Multi-Axial Stress Conditions. 3rd International ECCC - Creep & Fracture Conference. 2014
2013
  1. HAYAKAWA, Masao, TABUCHI, Masaaki, ABE, Fujio. ニッケル基合金(Alloy 617)のクリープ疲労特性評価. 先進超々臨界圧火力発電技術開発 講演会. 2013
  2. TABUCHI, Masaaki. クリープ条件下での欠陥評価法. 圧力容器規格委員会 圧力設備維持規格分科会. 2013
  3. NGUYEN, Dang Thuy, SAWADA, Kota, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. Quantitative analysis of microstructure after long-term creep exposure in 2.25Cr-1Mo steel. 第51回高温強度シンポジウム. 2013
  4. SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro. Contribution of microstructural factors to hardness change during creep exposure in Grade 91 steel. NIMS-MPAS-IfWD Workshop. 2013
  5. TABUCHI, Masaaki. 先進超々臨界圧火力発電ボイラーの異材溶接部のクリープ強度. 日本鉄鋼協会 高クロム鋼WG. 2013
  6. SAWADA, Kota, HARA, Toru, TABUCHI, Masaaki, KIMURA, Kazuhiro, Keiji Kubushiro. 改良9Cr-1Mo鋼の溶接熱影響部の組織解析. 日本鉄鋼協会第166回秋季講演大会. 2013
  7. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. CREEP STRENGTH OF DISSIMILAR WELD USING HIGH B-9CR STEEL FOR A-USC BOILER. ASME Boiler & Pressure Vessels Code Committee. 2013
  8. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu, LIU, Yuan. Boron: Type IV Cracking. Adventures in the Physical Metallurgy of Steels. 2013
  9. TABUCHI, Masaaki. 高温構造部材における損傷、破壊、寿命の評価方法. セミナー「高温疲労、クリープの損傷と破壊のメカニズムおよび寿命予. 2013
  10. TABUCHI, Masaaki. クリープ疲労き裂進展試験方法の標準化. 圧力設備維持規格分科会. 2013
  11. Kimiaki Yoshida, Masataka Yatomi, TABUCHI, Masaaki, Kenichi Kobayashi. 改良9Cr-1Mo鋼HAZ細粒域における応力多軸性とクリープ損傷の関係. 日本材料学会 第62期学術講演会. 2013
  12. NGUYEN, Dang Thuy, SAWADA, Kota, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. Change of Precipitate Free Zone during Aging and Creep in 2.25Cr-1Mo Steel. 日本材料学会 第62期通常総会・学術講演会. 2013
  13. Ryuji Sugiura, A. Toshimitsu Yokobori, Jr., Kazuto Sato, TABUCHI, Masaaki, Kenichi Kobayashi, Masataka Yatomi. 環状切欠き試験片を用いたP92鋼溶接継手材のクリープき裂成長特性. 日本材料学会 第62期学術講演会. 2013
  14. TSUKAMOTO, Susumu, LIU, Yuan, SHIRANE, Takahiro, TABUCHI, Masaaki, ABE, Fujio. フェライト系耐熱鋼溶接熱影響部の組織と継手クリープ特性の改善. 耐熱鋼溶接部組織の共通理解のための技術基盤構築自主フォーラムシン. 2013
  15. TABUCHI, Masaaki. Evaluation of creep damage and fracture in high Cr steel welds. VAMAS TWA31 meeting. 2013
2012
  1. Kimiaki Yoshida, Masataka Yatomi, TABUCHI, Masaaki, Kenichi Kobayashi. 多軸応力下における改良9Cr-1Mo鋼HAZ細粒域のクリープ損傷評価法. 第50回記念高温強度シンポジウム. 2012
  2. SAWADA, Kota, KUSHIMA, Hideaki, HARA, Toru, KOBAYASHI, Satoru, TABUCHI, Masaaki, KIMURA, Kazuhiro. ASME Gr.91鋼の長時間クリープ強度のヒート間差と組織安定性. 第50回記念高温強度シンポジウム. 2012
  3. TABUCHI, Masaaki. 高Cr耐熱鋼の溶接部の組織とクリープ損傷. 日本学術振興会 耐熱金属材料第123委員会. 2012
  4. ABE, Fujio, TABUCHI, Masaaki, HAYAKAWA, Masao, Hiroyuki Semba, Hirokazu Okada, Masaaki Igarashi. 長時間クリープ破断強度評価および異材溶接継手の損傷評価. 先進超々臨界圧火力発電技術開発 講演会. 2012
  5. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. A-USCボイラ材料の異材溶接部のクリープ強度. 第56回日本学術会議材料工学連合講演会. 2012
  6. SAWADA, Kota, HARA, Toru, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. Effects of minor element and creep deformation on Z phase formation in Gr.91 steel. Energy Materials Conference 2012. 2012
  7. SAWADA, Kota, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. Effect of creep deformation on Z-phase formation in Gr.91 steel. 9th Int. Conf. on Creep and Fatigue at Elevated temperatures. 2012
  8. Kimiaki Yoshida, Masataka Yatomi, TABUCHI, Masaaki, Kenichi Kobayashi. Creep Life Prediction for HAZ of Mod. 9Cr-1Mo Steels under Multi-axial Stress Conditions. 4th Int. Conf. on the Integrity of High Temperature Welds. 2012
  9. SAWADA, Kota, KUSHIMA, Hideaki, HARA, Toru, TABUCHI, Masaaki, KIMURA, Kazuhiro. ASME Gr.91鋼のZ相析出挙動に及ぼす微量添加元素およびクリープの影響. 日本鉄鋼協会第164回秋季講演大会. 2012
  10. TABUCHI, Masaaki. 高クロム耐熱鋼溶接部の組織とクリープ損傷. 日本学術振興会 先端材料強度129委員会. 2012
  11. TABUCHI, Masaaki. 耐熱合金の高温強度と信頼性評価. 第19回岡山新材料技術融合フォーラム. 2012
  12. SAWADA, Kota, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. 改良9Cr-1Mo鋼の時効に伴う高温耐力変化を考慮したクリープ強度評価. 日本材料学会第61期学術講演会. 2012
  13. Kimiaki Yoshida, Masataka Yatomi, TABUCHI, Masaaki, Kenichi Kobayashi. 多軸応力下における改良9Cr-1Mo鋼HAZ細粒域のクリープ損傷評価法. 日本材料学会第61期学術講演会. 2012
  14. TABUCHI, Masaaki. 高温き裂進展試験法WG活動状況. 公開部門委員会−高温強度における現在の課題とその解決に向けて−. 2012
  15. Shigeru SUZUKI, E. P. Kwon, TABUCHI, Masaaki, ABE, Fujio. フェライト系耐熱鋼中の軽元素の二次イオン質量分析. 日本鉄鋼協会第163回春季講演大会. 2012
  16. TABUCHI, Masaaki. 高クロム耐熱鋼溶接継手の組織とクリープ損傷. 第163回春季講演大会「非線形現象を利用した非破壊的損傷評価」 . 2012
  17. TABUCHI, Masaaki. Type-IV Creep Damage Behavior in High Cr Ferritic Steel Welds. Workshop for High Temperature Materials for USC Boiler. 2012
  18. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu, LIU, Yuan. 9Cr鋼のクリープ寿命と組織劣化因子. 鉄鋼材料の革新的高強度・高機能化基盤研究開発第2回シンポジウム. 2012
2010
  1. SAWADA, Kota, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. T91鋼の低応力域における組織変化とクリープ強度低下. 第48回高温強度シンポジウム. 2010
  2. HIRAGA, Keijiro, YOSHIDA, Hidehiro, MORITA, Koji, KIM, Byung-Nam, TABUCHI, Masaaki. High-strain-rate superplasticity and failure in undoped tetragonal zirconia polycrystals (Y-TZP). 第3回セラミックス国際会議. 2010
  3. TABUCHI, Masaaki, ABE, Fujio. 異材溶接継手の損傷評価、長時間クリープ破断強度評価. 先進超々臨界圧火力発電技術開発講演会. 2010
  4. TABUCHI, Masaaki, A. Toshimitsu Yokobori, Jr., Ryuji Sugiura, Masataka Yatomi, Kenichi Kobayashi. Evaluation of Creep Crack Growth Properties of Gr.92 Steel Weldment. International Conference on Fracture and Strength 2010. 2010
  5. HIRAGA, Keijiro, YOSHIDA, Hidehiro, MORITA, Koji, KIM, Byung-Nam, TABUCHI, Masaaki. 無添加3Y-TZPにおける高速超塑性の発現と破断. 日本金属学会2010年秋期講演大会. 2010
  6. TABUCHI, Masaaki. Introduction of the deformation and fracture behavior of materials at high temperatures. 若手研究者および技術者のための高温強度講習会. 2010
  7. TABUCHI, Masaaki. 高クロム耐熱鋼溶接継手のクリープき裂成長特性に関するVAMAS共同研究. 先端材料強度129委員会. 2010
  8. HONGO, Hiromichi, TABUCHI, Masaaki, WATANABE, Takashi, LIU, Yuan, TSUKAMOTO, Susumu. 高Cr鋼溶接継手におけるType-IV損傷の成長挙動. 第59期通常総会・学術講演会. 2010
  9. SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro. 耐熱鋼の30万時間クリープ曲線解析. 日本材料学会第59期学術講演会. 2010
  10. TABUCHI, Masaaki, HONGO, Hiromichi, Toshimitsu Yokobori, Jr., Ryuji Sugiura, Masataka Yatomi, Kenichi Kobayashi. 高クロム耐熱鋼の溶接継手におけるクリープき裂成長特性. 日本材料学会第59期学術講演会. 2010
  11. Kenichi Kobayashi, TABUCHI, Masaaki, Gavin C. Stratford. P92鋼溶接熱影響部のSPクリープ破壊強度とFEM解析. 日本材料学会第59期学術講演会. 2010
  12. SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro. 高Cr鋼の長時間クリープ特性に及ぼす組織安定性の影響. 第1回構造材料国際クラスターシンポジウム. 2010
  13. SAWADA, Kota, TABUCHI, Masaaki, KUSHIMA, Hideaki, KIMURA, Kazuhiro, HARA, Toru, Xin Man, Toshiaki Fujii. 高Cr鋼の低応力域でのクリープ強度と組織変化. 日本鉄鋼協会第159回春季講演大会. 2010
  14. TABUCHI, Masaaki. 耐熱鋼の高温損傷と破壊に及ぼす多軸応力の影響. 日本鉄鋼協会第159回春季講演大会. 2010
  15. TABUCHI, Masaaki, HONGO, Hiromichi. Evaluation of Long-term Creep Damages in High Cr Steel Welds. 8th International NIMS-MPA-IfW-Workshop. 2010
  16. HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro, TABUCHI, Masaaki. 無添加3Y-TZPにおける高速超塑性と破断. 日本セラミックス協会2010年度年会. 2010
2009
  1. SAWADA, Kota, KIMURA, Kazuhiro, TABUCHI, Masaaki, Mathias Bauer, Florian Kauffmann, Andreas Klenk. 高Cr鋼におけるクリープ中の多軸応力場と微細組織変化の関係. 第47回高温強度シンポジウム. 2009
  2. Yasutaka Noguchi, Yukio Takahashi, Nobuhiro Isobe, TABUCHI, Masaaki, Tetsuo Teramae, Shingo Date, Masataka Yatomi. 改良9Cr-1Mo鋼のクリープき裂進展試験を対象とした非弾性解析. 第47回高温強度シンポジウム. 2009
  3. TABUCHI, Masaaki, ABE, Fujio. 異材溶接継手の損傷評価、長時間クリープ破断強度評価. 先進超々臨界圧火力発電技術開発講演会. 2009
  4. SAWADA, Kota, KIMURA, Kazuhiro, TABUCHI, Masaaki, Mathias Bauer, Florian Kauffmann, Andreas Klenk. 高Cr鋼溶接熱影響部のクリープ中組織変化と多軸応力. 第53回日本学術会議材料研究連合講演会. 2009
  5. HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro, TABUCHI, Masaaki. 超塑性ジルコニアにおける粒界損傷と引張破断. 第53回日本学術会議材料工学連合講演会. 2009
  6. Masataka Yatomi, TABUCHI, Masaaki. 環状切欠き試験片のクリープき裂進展速度における応力多軸度の影響について. 第53回日本学術会議材料工学連合講演会. 2009
  7. HIRAGA, Keijiro, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro, TABUCHI, Masaaki. 正方晶ジルコニア(3Y-TZP)の超塑性引張破断. 日本セラミックス協会2009年秋季シンポジウム. 2009
  8. Nakazato Naofumi, Komazaki Shin-ichi , SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro, Kohno Yutaka. Change in Hydrogen Desorption Spectrum of Cr-Mo-V Steel Due to Creep. 14th International conference on fusion reactor materials. 2009
  9. Nakazato Naofumi, Komazaki Shin-ichi, SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro, Kohno Yutaka. 1Cr-1Mo-0.25V鋼のクリープに伴う水素放出特性の変化. M&M2009材料力学カンファレンス. 2009
  10. SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro, M.Bauer, F.Kauffmann, A.Klenk. 9-12%Cr鋼溶接熱影響部のクリープに伴う組織変化. 日本学術振興会耐熱金属材料第123委員会. 2009
  11. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu, Takahiro Shirane. Microstructure Evolution in HAZ and Suppression of Type IV Fracture in Advanced Ferritic Power Plant Steels. International Conference WELDS 2009. 2009
  12. HONGO, Hiromichi, TABUCHI, Masaaki, WATANABE, Takashi, Yukio Takahashi. P122鋼溶接継手のType-IV損傷挙動. 第58期通常総会・学術講演会. 2009
  13. Kenichi Kobayashi, TABUCHI, Masaaki. P92鋼溶接部のSPクリープ破壊強度. 第58期通常総会・学術講演会. 2009
  14. TABUCHI, Masaaki. 高クロム耐熱鋼の溶接継手のType-IV損傷に関する研究. 日本保全学会分科会. 2009
  15. ABE, Fujio, TABUCHI, Masaaki, TSUKAMOTO, Susumu. フェライト系耐熱鋼溶接継手の長時間クリープ強度劣化機構および特性改善. 鉄鋼材料の革新的高強度・高機能化基盤研究開発第1回シンポジウム. 2009
  16. SAWADA, Kota, TABUCHI, Masaaki, FUJITSUKA, Masakazu, KIMURA, Kazuhiro. ASME Gr.23鋼の長時間クリープ強度に及ぼす組織・酸化の影響. 日本鉄鋼協会第157回春季講演大会. 2009
  17. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. 9-12%Cr系耐熱鋼のクリープに伴う組織変化と材質劣化の特徴. 日本鉄鋼協会 電磁計測技術を用いた材料劣化診断の調査研究フォーラ. 2009
  18. HIRAGA, Keijiro, TABUCHI, Masaaki, KIM, Byung-Nam, MORITA, Koji, YOSHIDA, Hidehiro. 酸化物系セラミックスの超塑性引張破断におけるき裂形成条件. 日本セラミックス協会2009年年会. 2009
  19. SAWADA, Kota, FUJITSUKA, Masakazu, TABUCHI, Masaaki, KIMURA, Kazuhiro. ASME Gr.23鋼の長時間クリープ強度特性. 日本学術振興会 耐熱金属材料第123委員会. 2009
2008
  1. SAWADA, Kota, FUJITSUKA, Masakazu, TABUCHI, Masaaki, KIMURA, Kazuhiro. ASME Gr.23の長時間クリープ強度特性に及ぼす酸化の影響. 第46回高温強度シンポジウム. 2008
  2. Nobuhiro Isobe, TABUCHI, Masaaki, Shingo Date, Fumiko Kawashima, Yasutaka Noguchi, Yukiko Takahashi. 改良9Cr-1Mo鋼とその溶接継手のクリープき裂進展挙動. 第46回高温強度シンポジウム. 2008
  3. TABUCHI, Masaaki. 高温における材料の変形挙動の概論. 若手研究者および技術者のための高温強度講習会. 2008
  4. Takashi KOHYAMA, Ken-ichi KOBAYASHI, Hideo KOYAMA, TABUCHI, Masaaki. SPC 試験による高クロム鋼(P92)溶接部材のクリープ寿命評価. 関東支部 学生研究交流会. 2008
  5. TSUKAMOTO, Susumu, SHIRANE, Takahiro, TSUZAKI, Kaneaki, ADACHI, Yoshitaka, TABUCHI, Masaaki, ABE, Fujio. Improvement of Creep Property in High Cr Ferritic Heat Resistant Steel Welded Joint. 第156回秋季講演大会国際セッション. 2008
  6. TABUCHI, Masaaki, HONGO, Hiromichi, WATANABE, Takashi, Yukio Takahashi. 高Cr耐熱鋼の溶接部のクリープ強度に及ぼすボロンの影響. 日本鉄鋼協会第156回秋季講演大会. 2008
  7. HONGO, Hiromichi, TABUCHI, Masaaki, Yukio Takahashi. 高Cr鋼溶接継手のType-IV損傷と組織. M&M2008材料力学カンファレンス. 2008
  8. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. 高Cr鋼における有害相析出と長時間クリープ強度低下. M&M2008材料力学カンファレンス. 2008
  9. SAWADA, Kota, Kenta Suzuki, KUSHIMA, Hideaki, TABUCHI, Masaaki, KIMURA, Kazuhiro. 高強度フェライト鋼の焼戻し熱処理によるZ相析出抑制. 先進材料の高温強度と組織研究会「平成20年度夏の学校」. 2008
  10. TABUCHI, Masaaki. 超超臨界圧火力発電プラントの高効率化を目指した高クロム耐熱鋼の開発. 環境・エネルギー材料研究展. 2008
  11. TABUCHI, Masaaki, HONGO, Hiromichi, WATANABE, Takashi. 高クロム耐熱鋼溶接継手のクリープ損傷評価. 日本材料学会 第57期学術講演会. 2008
  12. TABUCHI, Masaaki. Results of Japanese RRT program using P92 steel welds. VAMAS TWA31 anual meeting. 2008
  13. LI, Yongkui, HONGO, Hiromichi, TABUCHI, Masaaki, Yoshio Monma. Development of Creep voids in Fine-Grained Heat Affected Zone of Mod.9Cr-1Mo Steel Welded Joint. 日本鉄鋼協会第155回春季講演大会. 2008
  14. TABUCHI, Masaaki. クリープ損傷・破壊に及ぼす多軸応力の影響に関する研究. 多軸クリープ委員会. 2008
2007
  1. TABUCHI, Masaaki. 超超臨界圧火力発電プラントの高効率化のための高クロム耐熱鋼の開発. 環境研究機関連絡会 第5回成果発表会. 2007
  2. TABUCHI, Masaaki. 高温破壊に関するVAMAS活動の成果. 日本学術振興会 先端材料強度129委員会. 2007
  3. WATANABE, Takashi, YAMAZAKI, Masayoshi, HONGO, Hiromichi, TABUCHI, Masaaki. High-Temperature Strengths of Dissimilar Welded Joint. International Symposium on Sustainable Energy & Materials. 2007
  4. HONGO, Hiromichi, TABUCHI, Masaaki, WATANABE, Takashi. Type-IV Creep Damage Evaluation for Thick Plate Welded Joints of Mod.9Cr-1Mo Steel. International Symposium on Sustainable Energy & Materials. 2007
  5. TABUCHI, Masaaki, HONGO, Hiromichi. Improvement of Type-IV Cracking Resistance of High Cr Heat Resisting Steel Welds. International Symposium on Sustainable Energy & Materials. 2007
  6. HONGO, Hiromichi, TABUCHI, Masaaki, Yukio Takahashi . 高クロム鋼溶接継手の長時間高温強度に関する研究 その1:Type-IV損傷の生成プロセスの調査. 日本機械学会2007年度年次大会. 2007
  7. Ryuji Sugiura, Toshimitsu Yokobori, Jr. , Kazuto Suzuki , TABUCHI, Masaaki. W添加9Crフェライト系耐熱鋼溶接継手材のクリープき裂成長特性. 日本機械学会2007年度年次大会. 2007
  8. TABUCHI, Masaaki, HONGO, Hiromichi, Yukio Takahashi. 高クロム鋼溶接継手の長時間高温強度に関する研究 その6:Type-IV損傷抑制のための材料の改良. 日本機械学会創立110周年記念 2007年度年次大会. 2007
  9. TSUKAMOTO, Susumu, KONDO, MASAYUKI, TABUCHI, Masaaki, ABE, Fujio. Suppression of Type IV Failure in High Cr Heat Resistant Steel Welded Joint. 60th Annual Assembly and Inernational Conference of IIW. 2007
  10. TABUCHI, Masaaki. 耐熱鋼溶接継手の高温損傷・破壊に関する研究とVAMAS標準化活動. 先端材料強度129委員会 第96回本委員会. 2007
  11. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. Long-term Reliability of High Chromium Ferritic Steels for Application to Next Generation Fast Breeder Reactor. The 15th International Conference on Nuclear Engineering. 2007
  12. Yukio Takahashi, Hiroyuki Fukutomi, Takashi Wakai, TABUCHI, Masaaki, Yutaka Toi, Toshiyuki Takagi, Tetsuya Uchimoto. 高クロムフェライト鋼溶接部のクリープ損傷とその検出技術の開発. 第10回表面探傷シンポジウム. 2007
  13. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. 先進発電プラント用耐熱鋼の長時間クリープに伴う組織変化と材質劣化. 第10回表面探傷シンポジウム. 2007
2006
  1. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. 9-12%Cr鋼において生成するZ相の特徴とそのクリープ強度へ及ぼす影響. 第4回「耐熱鋼および耐熱合金の組織安定性と寿命推定」フォーラム. 2006
  2. TABUCHI, Masaaki. Japanese Test Programme and Results in VAMAS TWA31. VAMAS TWA31. 2006
  3. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. 9-12%Cr鋼における500〜700℃でのZ相析出挙動とクリープ強度低下. 日本材料学会第44回高温強度シンポジウム. 2006
  4. Toshimitsu Yokobori, TABUCHI, Masaaki. VAMAS高温強度に関する国際規格案について. 日本学術振興会 先端材料強度129委員会. 2006
  5. HIRAGA, Keijiro, TABUCHI, Masaaki. 超塑性変形中のセラミックスにおけるキャビテーション破断. 第44回高温強度シンポジウム. 2006
  6. SAWADA, Kota, KIMURA, Kazuhiro, ABE, Fujio, TABUCHI, Masaaki. 耐熱鋼における高温での擬弾性挙動. 材料の微細組織と機能性第133委員会研究会. 2006
  7. TABUCHI, Masaaki. 9Cr系耐熱鋼の溶接継手クリープ強度低減係数の評価. 日本材料学会 高温強度部門委員会. 2006
  8. YAMAZAKI, Masayoshi, TABUCHI, Masaaki, WATANABE, Takashi, HONGO, Hiromichi. Creep rupture pproperties and fracture type of dissimilar welded joint. 59th Annual Assembly and International conference of the Interna. 2006
  9. SAWADA, Kota, KUSHIMA, Hideaki, KIMURA, Kazuhiro, TABUCHI, Masaaki. 高Crフェライト系鋼における粗大複合窒化物形成による強化機能喪失. 日本金属学会「先進材料の高温強度と組織研究会」. 2006
  10. TABUCHI, Masaaki. 高温構造部材の損傷・破壊に関する研究. NIMSイブニングセミナー. 2006
  11. TABUCHI, Masaaki. 高Crフェライト系耐熱鋼溶接継手のTypeIV破壊に関する研究. 化学機械溶接研究委員会. 2006
  12. YAMAZAKI, Masayoshi, WATANABE, Takashi, HONGO, Hiromichi, TABUCHI, Masaaki. Creep Rupture Properties and Fracture Mode of Dissimilar Welded Joint. IIW Working Group Creep intermediate meeting . 2006
  13. SHIMIZU, MASATSUGU, TSUKAMOTO, Susumu, KONDO, MASAYUKI, TABUCHI, Masaaki, ABE, Fujio. ボロン添加による9%Crフェライト系耐熱鋼溶接継手のタイプIV破壊抑制. 溶接学会 平成18年度春季全国大会. 2006
  14. TABUCHI, Masaaki. 改良9Cr-1Mo鋼の溶接継手強度低減係数の評価. 日本材料学会 高温強度部門委員会 非弾性解析WG. 2006
  15. SEMBA, HIROYUKI, TABUCHI, Masaaki, ABE, Fujio, YOSHIZAWA Mitsuru, IGARASHI Masaaki, NOBUYOSHI Komai, FUJITA Akitsugu. 高B添加による9Cr耐熱鋼のクリープ強度向上. 日本鉄鋼協会第151回春季講演大会. 2006
  16. Mitsuru Yoshizawa, Masaaki Igarashi, SEMBA, HIROYUKI, TABUCHI, Masaaki, ABE, Fujio, Nobuyoshi Komai, Akitsugu Fujita. 高B添加9Cr-W-Co-VNb鋼の熱間加工性. 日本鉄鋼協会第151回春季講演大会. 2006
  17. Nobuyoshi Komai, Akitsugu Fujita, Mitsuru Yoshizawa, Masaaki Igarashi, SEMBA, HIROYUKI, TABUCHI, Masaaki, ABE, Fujio. 高B添加9Cr-W-Co-VNb鋼の溶接性. 日本鉄鋼協会第151回春季講演大会. 2006
  18. TABUCHI, Masaaki. 多軸応力下での構造部材の高温破壊に関する研究. NIMSフォーラム2006. 2006
2005
  1. TABUCHI, Masaaki. NF616鋼及びHCM2S鋼の溶接継手の長時間クリープ強度評価. SHC委員会. 2005
  2. TABUCHI, Masaaki, ABE, Fujio. 先進フェライト系耐熱鋼の研究開発. 日本材料学会 高温強度部門委員会. 2005
  3. ABE, Fujio, TABUCHI, Masaaki, 近藤雅之, 岡田浩一. Suppression of Type IV fracture in welded joints of advanced ferritic power plant steels-Effect of boron and nitrogen. International Conference on Design, Testing, Assessment and Safe. 2005
  4. A.T. Yokobori, Jr., R. Sugiura, TABUCHI, Masaaki. The estimation of creep crack growth at the heat affected zone of welded joint for 9%Cr ferritic steel based on Q* concept. Int. Conf. on WELDS2005. 2005
  5. TABUCHI, Masaaki. Improvment of HAZ microstructures of 9Cr heat resisting steel by boron addition.. IfW-MPA-NIMSセミナー. 2005
  6. R. Sugiura, A.T. Yokobori, Jr., M. Arai, TABUCHI, Masaaki, A. Fuji. The effect of embrittlement on creep crack growth rate for tungsten added 12Cr ferritic heat resistant steel concerning multi-ax. VAMAS TWA31 meeting. 2005
  7. TABUCHI, Masaaki. Progress of Japan Group Reseraches. VAMAS TWA31 meeting. 2005
  8. SHIMIZU, MASATSUGU, 近藤雅之, TSUKAMOTO, Susumu, YIN, Fuxing, TABUCHI, Masaaki, ABE, Fujio. Creep properties and microstructure of boron contained 9%Cr heat resistant steel HAZ. 第9回超鉄鋼ワークショップ. 2005
  9. TABUCHI, Masaaki, HONGO, Hiromichi, WATANABE, Takashi, 横堀寿光. Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel. 第5回疲労と破壊に関するASTM/ESIS国際シンポジウム. 2005
  10. SHIMIZU, MASATSUGU, KONDO, MASAYUKI, TSUKAMOTO, Susumu, YIN, Fuxing, TABUCHI, Masaaki, ABE, Fujio. ボロン添加9%Cr フェライト系耐熱鋼のHAZ 再現材のクリープ特性と組織. 日本鉄鋼協会第149回春季講演大会. 2005
  11. 弥富政享, TABUCHI, Masaaki. Comparisons of C* estimation for notched bar specimen with experimental data. VAMAS TWA25. 2005
  12. TABUCHI, Masaaki. Super 9Cr鋼溶接継手強度の検討結果. 第5回SHC委員会. 2005
  13. 横堀寿光, TABUCHI, Masaaki, 富士彰夫, 弥富政享, 横堀武夫. 高温構造物におけるクリープ/疲労き裂成長. VAMAS国内対応委員会. 2005
  14. TABUCHI, Masaaki. 9Cr鋼溶接継手のクリープ破断強度のLMP回帰. 第3回SHC委員会. 2005
2004
  1. 猪狩敏秀, 高橋由起夫, TABUCHI, Masaaki, ほか非弾性解析WG 15名. 高クロム鋼のクリープ・疲労き裂進展挙動の評価. 第42回高温強度シンポジウム. 2004
  2. TABUCHI, Masaaki. 9Cr鋼溶接継手のクリープ破断データ. SHC委員会. 2004
  3. SEMBA, HIROYUKI, TABUCHI, Masaaki, ABE, Fujio, 五十嵐正晃, 岡田浩一, 西村宣彦, 駒井伸好. 窒素含有高ボロン9Cr鋼のクリープ強度と組織. 日本鉄鋼協会第148回秋季講演大会. 2004
  4. WATANABE, Takashi, YAMAZAKI, Masayoshi, HONGO, Hiromichi, TABUCHI, Masaaki, TANABE, Tatsuhiko. 異材溶接継手のクリープ破断特性と破壊形態. 日本鉄鋼協会第148回秋季講演大会. 2004
  5. TABUCHI, Masaaki. 高Cr鋼溶接部のクリープ強度の最近の研究動向. 高Cr鋼の長時間クリープ強度低下に関する検討会. 2004
  6. KONDO, MASAYUKI, TABUCHI, Masaaki, TSUKAMOTO, Susumu, YIN, Fuxing, ABE, Fujio. Suppression of type IV failure by boron in 9Cr heat resistant steel welded joints. 第8回超鉄鋼ワークショップ. 2004
  7. 横堀壽光, 杉浦隆次, TABUCHI, Masaaki, 富士彰夫, 足立岳志, 横堀武夫. Effect of multiaxial stress component on creep crack growth rate concerning structural brittleness. VAMAS TWA25 meeting. 2004
  8. TABUCHI, Masaaki. Results of RRT and proposal of CCG test method using circular notched bar specimens. VAMAS TWA25 meeting. 2004
  9. TABUCHI, Masaaki. HCM12A鋼溶接継手のクリープ破断寿命評価. 高温材料強度部門委員会 非弾性解析WG. 2004
  10. KONDO, MASAYUKI, TABUCHI, Masaaki, TSUKAMOTO, Susumu, YIN, Fuxing, ABE, Fujio. ボロン添加9Cr系耐熱鋼溶接継手のクリープ特性向上とHAZ組織. 第176回溶接冶金研究委員会. 2004
  11. YAMAZAKI, Masayoshi, YAGI, Koichi, HONGO, Hiromichi, WATANABE, Takashi, TABUCHI, Masaaki, KIMURA, Kazuhiro. Present Status and Future Prospect of Creep Data of weldments in NIMS. Intermediate meeting of IIW IX Creep Working Group. 2004
  12. KONDO, MASAYUKI, TABUCHI, Masaaki, TSUKAMOTO, Susumu, SHAJU, ALBERT, YIN, Fuxing, ABE, Fujio. ボロン強化9Cr系耐熱鋼のHAZ組織形成過程. 日本鉄鋼協会第147回春季講演大会. 2004
  13. TABUCHI, Masaaki, KUSUNOKI, Katsuyuki. 照射下における材料挙動の研究. 原子力クロスオーバ研究報告会. 2004

特許 TSV

登録特許
  1. 特許第6399509号 高強度フェライト系耐熱鋼構造体およびその製造方法 (2018)
  2. 特許第6388276号 耐熱鋼及びその製造方法 (2018)
  3. 特許第4188124号 焼き戻しマルテンサイト系耐熱鋼の溶接継手 (2008)
公開特許出願
    外国特許
    1. No. JP2016014178A HIGH STRENGTH FERRITIC HEAT RESISTANT STEEL STRUCTURE AND METHOD FOR PRODUCING THE SAME (2016)
    2. No. EP1621643A4 WELDED JOINT OF TEMPERED MARTENSITE BASED HEAT-RESISTANT STEEL (2009)
    3. No. US20060237103A1 Welded joint of tempered martensite based heat-resistant steel (2006)
    4. No. CN1784503A Welded joint of tempered martensite based heat-resistant steel (2006)
    5. No. KR2006011946A WELDED JOINT OF TEMPERED MARTENSITE BASED HEAT-RESISTANT STEEL (2006)
    6. No. EP1621643A1 WELDED JOINT OF TEMPERED MARTENSITE BASED HEAT-RESISTANT STEEL (2006)
    7. No. WO2004087979A1 WELDED JOINT OF TEMPERED MARTENSITE BASED HEAT-RESISTANT STEEL (2004)

    ▲ページトップへ移動