SAMURAI - NIMS Researchers Database

HOME > Profile > SHIBATA, Akinobu

SHIBATA, Akinobu

SHIBATA, Akinobu (柴田 曉伸) 0000-0001-8577-6411

Address
305-0047 1-2-1 Sengen Tsukuba Ibaraki JAPAN [Access]
Web Site

[Research papers] | [Books] | [Proceedings] | [Presentations] | [Misc] | [Published patent applications]

Research papers TSV

2024
  1. Akinobu Shibata, Yazid Madi, Jacques Besson, Akiko Nakamura, Taku Moronaga, Kazuho Okada, Ivan Gutierrez-urrutia, Toru Hara. Relationship between Three-dimensional Crack Morphology and Macroscopic Mechanical Properties of Hydrogen-related Fracture in Martensitic Steel. ISIJ International. 64 [4] (2024) ISIJINT-2023-316 10.2355/isijinternational.isijint-2023-316 Open Access
  2. Akinobu Shibata, Tomoyuki Katsuno, Mizuki Tsuboi, Nobuhiro Tsuji. Effect of Bain Unit Size on Low-temperature Fracture Toughness in Medium-carbon Martensitic and Bainitic Steels. ISIJ International. 64 [2] (2024) ISIJINT-2023-141 10.2355/isijinternational.isijint-2023-141 Open Access
  3. Tatsuya Morikawa, Akinobu Shibata, Naoto Nakamura, Masaki Tanaka, Kenji Higashida. Determination of Microscopic Strain Distribution in the Martensitic Transformation of Fe-31Ni Alloy Plates Using the Micro-grid Marker Method. ISIJ International. 64 [2] (2024) ISIJINT-2023-163 10.2355/isijinternational.isijint-2023-163 Open Access
  4. Rintaro Ueji, Wu Gong, Stefanus Harjo, Takuro Kawasaki, Akinobu Shibata, Yuuji Kimura, Tadanobu Inoue, Noriyuki Tsuchida. Deformation-induced Martensitic Transformation at Tensile and Compressive Deformations of Bainitic Steels with Different Carbon Contents. ISIJ International. 64 [2] (2024) ISIJINT-2023-253 10.2355/isijinternational.isijint-2023-253 Open Access
  5. Sukyoung Hwang, Yu Bai, Si Gao, Myeong-Heom Park, Akinobu Shibata, Nobuhiro Tsuji. Mechanism of simultaneous increase of strength and ductility with grain refinement in Si-added high-Mn austenitic steel. Materials Science and Engineering: A. 894 (2024) 146193 10.1016/j.msea.2024.146193
  6. Ivan Gutierrez-Urrutia, Akinobu Shibata. Effect of deformation temperature on strain localization phenomena in an austenitic Fe-30Mn-6.5Al-0.3C low-density steel. Acta Materialia. 264 (2024) 119566 10.1016/j.actamat.2023.119566 Open Access
2023
  1. 高井 健一, 松永 久生, 小川 祐平, 荒河 一渡, 藤浪 眞紀, 松本 龍介, 小山 元道, 柴田 曉伸, 武富 紳也. 水素脆化における潜伏期から破壊までの実態解明における新展開. ふぇらむ：日本鉄鋼協会会報. 28 [4] (2023) 232-240
  2. Akinobu Shibata, Ivan Gutierrez-Urrutia, Akiko Nakamura, Kazuho Okada, Goro Miyamoto, Yazid Madi, Jacques Besson, Toru Hara, Kaneaki Tsuzaki. Three-dimensional propagation behavior of hydrogen-related intergranular cracks in high-strength martensitic steel. International Journal of Hydrogen Energy. 48 [88] (2023) 34565-34574 10.1016/j.ijhydene.2023.05.211 Open Access
  3. Wenqi Mao, Si Gao, Wu Gong, Yu Bai, Stefanus Harjo, Myeong-Heom Park, Akinobu Shibata, Nobuhiro Tsuji. Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel. Acta Materialia. 256 (2023) 119139 10.1016/j.actamat.2023.119139
  4. Kazuho Okada, Akinobu Shibata, Nobuhiro Tsuji. Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel. Scripta Materialia. 234 (2023) 115568 10.1016/j.scriptamat.2023.115568 Open Access
  5. Ivan Gutierrez-Urrutia, Akinobu Shibata. Influence of microscope settings on dislocation imaging in transmission forescattered electron imaging (t-FSEI). Materials Characterization. 203 (2023) 113147 10.1016/j.matchar.2023.113147
  6. Wu Gong, Stefanus Harjo, Yo Tomota, Satoshi Morooka, Takuro Kawasaki, Akinobu Shibata, Nobuhiro Tsuji. Lattice parameters of austenite and martensite during transformation for Fe–18Ni alloy investigated through in-situ neutron diffraction. Acta Materialia. 250 (2023) 118860 10.1016/j.actamat.2023.118860
  7. Akinobu Shibata, Goro Miyamoto, Shigekazu Morito, Akiko Nakamura, Taku Moronaga, Houichi Kitano, Ivan Gutierrez-Urrutia, Toru Hara, Kaneaki Tsuzaki. Substructure and crystallography of lath martensite in as-quenched interstitial-free steel and low-carbon steel. Acta Materialia. 246 (2023) 118675 10.1016/j.actamat.2023.118675 Open Access
  8. Kazuho Okada, Akinobu Shibata, Taisuke Sasaki, Hisashi Matsumiya, Kazuhiro Hono, Nobuhiro Tsuji. Improvement of resistance against hydrogen embrittlement by controlling carbon segregation at prior austenite grain boundary in 3Mn-0.2C martensitic steels. Scripta Materialia. 224 (2023) 115043 10.1016/j.scriptamat.2022.115043 Open Access
  9. Reza Gholizadeh, Shuhei Yoshida, Yu Bai, Shu Kurokawa, Akinobu Shibata, Nobuhiro Tsuji. Global understanding of deformation behavior in CoCrFeMnNi high entropy alloy under high-strain torsion deformation at a wide range of elevated temperatures. Acta Materialia. 243 (2023) 118514 10.1016/j.actamat.2022.118514 Open Access
  10. Baoqi Guo, Wenqi Mao, Yan Chong, Akinobu Shibata, Stefanus Harjo, Wu Gong, Huicong Chen, John J. Jonas, Nobuhiro Tsuji. Unexpected dynamic transformation from α phase to β phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation. Acta Materialia. 242 (2023) 118427 10.1016/j.actamat.2022.118427 Open Access
2022
  1. Kazuho Okada, Akinobu Shibata, Hisashi Matsumiya, Nobuhiro Tsuji. Origin of Serrated Markings on the Hydrogen Related Quasi-cleavage Fracture in Low-carbon Steel with Ferrite Microstructure. ISIJ International. 62 [10] (2022) ISIJINT-2022-212 10.2355/isijinternational.isijint-2022-212 Open Access
  2. Hisashi Matsumiya, Akinobu Shibata, Yoshiaki Maegawa, Kazuho Okada, Nobuhiro Tsuji. Hydrogen-related Fatigue Fracture under Various Test Frequencies in Low-carbon Martensitic Steel. ISIJ International. 62 [10] (2022) ISIJINT-2022-210 10.2355/isijinternational.isijint-2022-210 Open Access
  3. 柴田 曉伸. 高強度マルテンサイト鋼の水素脆性破壊と微視組織の関係. まてりあ. 61 [12] (2022) 860-863 10.2320/materia.61.860
  4. 柴田 曉伸. マルテンサイト鋼の水素ぜい性破壊. 材料. 71 [8] (2022) 672-677 10.2472/jsms.71.672 Open Access
  5. Akinobu Shibata, Ivan Gutierrez-Urrutia, Akiko Nakamura, Goro Miyamoto, Yazid Madi, Jacques Besson, Toru Hara, Kaneaki Tsuzaki. Multi-scale three-dimensional analysis on local arrestability of intergranular crack in high-strength martensitic steel. Acta Materialia. 234 (2022) 118053 10.1016/j.actamat.2022.118053 Open Access
  6. I. Gutierrez-Urrutia, A. Shibata, K. Tsuzaki. Microstructural study of microbands in a Fe-30Mn-6.5Al-0.3C low-density steel deformed at cryogenic temperature by combined electron channeling contrast imaging and electron backscatter diffraction. Acta Materialia. 233 (2022) 117980 10.1016/j.actamat.2022.117980
  7. Akinobu Shibata, Yasunari Takeda, Yuuji Kimura, Nobuhiro Tsuji. Hydrogen-Related Fracture Behavior under Constant Loading Tensile Test in As-Quenched Low-Carbon Martensitic Steel. Metals. 12 [3] (2022) 440 10.3390/met12030440 Open Access
  8. Wenqi Mao, Si Gao, Yu Bai, Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji. Effective grain size refinement of an Fe-24Ni-0.3C metastable austenitic steel by a modified two-step cold rolling and annealing process utilizing the deformation-induced martensitic transformation and its reverse transformation. Journal of Materials Research and Technology. 17 (2022) 2690-2700 10.1016/j.jmrt.2022.02.031 Open Access
  9. Kazuho Okada, Akinobu Shibata, Wu Gong, Nobuhiro Tsuji. Effect of hydrogen on evolution of deformation microstructure in low-carbon steel with ferrite microstructure. Acta Materialia. 225 (2022) 117549 10.1016/j.actamat.2021.117549 Open Access
  10. Akinobu Shibata, Ivan Gutierrez-Urrutia, Kazuho Okada, Goro Miyamoto, Yazid Madi, Jacques Besson, Kaneaki Tsuzaki. Relationship between mechanical response and microscopic crack propagation behavior of hydrogen-related intergranular fracture in as-quenched martensitic steel. Materials Science and Engineering: A. 831 (2022) 142288 10.1016/j.msea.2021.142288 Open Access
  11. Yuji Momotani, Akinobu Shibata, Nobuhiro Tsuji. Hydrogen embrittlement behaviors at different deformation temperatures in as-quenched low-carbon martensitic steel. International Journal of Hydrogen Energy. 47 [5] (2022) 3131-3140 10.1016/j.ijhydene.2021.10.169
2021
  1. Sukyoung Hwang, Myeong-heom Park, Yu Bai, SHIBATA, Akinobu, Wenqi Mao, Hiroki Adachi, Masugu Sato, Nobuhiro Tsuji. Mesoscopic nature of serration behavior in high-Mn austenitic steel. ACTA MATERIALIA. (2021) 116543
  2. Yu Bai, Hiroki Kitamura, Si Gao, Yanzhong Tian, Nokeun Park, Myeong-heom Park, Hiroki Adachi, Akinobu Shibata, Masugu Sato, Mitsuhiro Murayama, Nobuhiro Tsuji. Unique transition of yielding mechanism and unexpected activation of deformation twinning in ultrafine grained Fe-31Mn-3Al-3Si alloy. Scientific Reports. 11 [1] (2021) 15870 10.1038/s41598-021-94800-6 Open Access
  3. Tingshu Chen, Takahiro Chiba, Motomichi Koyama, Akinobu Shibata, Eiji Akiyama, Kenichi Takai. Hierarchical Characteristics of Hydrogen-Assisted Crack Growth and Microstructural Strain Evolution in Tempered Martensitic Steels: Case of Quasi-cleavage Fracture. Metallurgical and Materials Transactions A. 52 [10] (2021) 4703-4713 10.1007/s11661-021-06423-1
  4. Hisashi Matsumiya, Akinobu Shibata, Kazuho Okada, Nobuhiro Tsuji. Characteristics of hydrogen-related fatigue fracture in 2Mn-0.1C martensitic steel. International Journal of Hydrogen Energy. 46 [75] (2021) 37509-37517 10.1016/j.ijhydene.2021.09.011
  5. Akinobu Shibata, Takashi Yonemura, Yuji Momotani, Myeong-heom Park, Shusaku Takagi, Yazid Madi, Jacques Besson, Nobuhiro Tsuji. Effects of local stress, strain, and hydrogen content on hydrogen-related fracture behavior in low-carbon martensitic steel. Acta Materialia. 210 (2021) 116828 10.1016/j.actamat.2021.116828
  6. Kaneaki Tsuzazki, Motomichi Koyama, Ryosuke Sasaki, Keiichiro Nakafuji, Kazushi Oie, Akinobu Shibata, Takashi Gondo, Hiroya Miyazaki, Hiroshi Akamine, Minoru Nishida. Novel −75°C SEM cooling stage: application for martensitic transformation in steel. Microscopy. 70 [2] (2021) 250-254 10.1093/jmicro/dfaa051 Open Access
  7. R Ueji, Y Kimura, K Ushioda, T Ohmura, T Inoue, A Shibata. Orientation dependence of transformation induced plasticity in high carbon bainitic steel. IOP Conference Series: Materials Science and Engineering. (2021) 012022 10.1088/1757-899x/1121/1/012022 Open Access
  8. Rintaro Ueji, Akinobu Shibata, Kohsaku Ushioda, Yuuji Kimura, Takahito Ohmura, Tadanobu Inoue. Crystallographic orientation dependence of deformation-induced martensitic transformation of 1.3 GPa-class 0.6 %C bainitic steel with retained austenite. Scripta Materialia. 194 (2021) 113666 10.1016/j.scriptamat.2020.113666
  9. Kazuho Okada, Akinobu Shibata, Yasunari Takeda, Nobuhiro Tsuji. Crystallographic analysis of fatigue fracture initiation in 8Ni-0.1C martensitic steel. International Journal of Fatigue. 143 (2021) 105921 10.1016/j.ijfatigue.2020.105921 Open Access
2020
  1. Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji. Challenging Ultra Grain Refinement of Ferrite in Low-C Steel Only by Heat Treatment. Frontiers in Materials. 7 (2020) 10.3389/fmats.2020.604792 Open Access
2019
  1. Nobuhiro Tsuji, Reza Gholizadeh, Rintaro Ueji, Naoya Kamikawa, Lijia Zhao, Yanzhong Tian, Yu Bai, Akinobu Shibata. Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys. MATERIALS TRANSACTIONS. 60 [8] (2019) 1518-1532 10.2320/matertrans.mf201936
  2. Ruixiao Zheng, Tilak Bhattacharjee, Si Gao, Wu Gong, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji. Change of Deformation Mechanisms Leading to High Strength and Large Ductility in Mg-Zn-Zr-Ca Alloy with Fully Recrystallized Ultrafine Grained Microstructures. Scientific Reports. 9 [1] (2019) 10.1038/s41598-019-48271-5 Open Access
2017
  1. Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Mohit Joshi, Nobuhiro Tsuji. Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures. Scripta Materialia. 131 (2017) 1-5 10.1016/j.scriptamat.2016.12.024

Books TSV

Proceedings TSV

2023
  1. A. Shibata, N. Tsuchida, S. Harjo, T. Inoue, T. Kawasaki, W. Gong, Y. Kimura, R. Ueji. Deformation-Induced Martensitic Transformation at Tensile and Compressive Deformations of High-Carbon Bainitic Steel. International Symposium on New Developments in Advanced High-Strength Sheet Steels. (2023) 10.33313/298/030
2019
  1. Shuhei Yoshida, Takuto Ikeuchi, Yu Bai, Akinobu Shibata, Niels Hansen, Xiaoxu Huang, Nobuhiro Tsuji. Deformation microstructures and strength of face-centered cubic high/medium entropy alloys. . (2019) 10.1088/1757-899x/580/1/012053
2017
  1. Yan Chong, Tilak Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji. Investigation of the grain size effect on mechanical properties of Ti-6Al-4V alloy with equiaxed and bimodal microstructures. . (2017) 10.1088/1757-899x/219/1/012013
  2. Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji. Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy. . (2017) 10.1088/1757-899x/194/1/012016
  3. L Zhao, N Park, Y Tian, A Shibata, N Tsuji. Realizing Ultrafine Grained Steel by Simple Hot Deformation Using Dynamic Transformation and Subsequent Dynamic Recrystallization Mechanisms. . (2017) 10.1088/1757-899x/194/1/012026
  4. Ruixiao Zheng, Tilak Bhattacharjee, Si Gao, Wu Gong, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji. Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy. . (2017) 10.1088/1757-899x/219/1/012055
  5. Guanyu Deng, Tilak Bhattacharjee, Yan Chong, Ruixiao Zheng, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing. . (2017) 10.1088/1757-899x/194/1/012020
  6. Si Gao, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Microstructures and mechanical property of a Fe-Ni-Al-C alloy containing B2 intermetallic compounds. . (2017) 10.1088/1757-899x/219/1/012020
  7. Daisuke Terada, Gosuke Ikeda, Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji. Reason for high strength and good ductility in dual phase steels composed of soft ferrite and hard martensite. . (2017) 10.1088/1757-899x/219/1/012008
2016
  1. Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji. Strength and Ductility of Ultrafine Grained ZKX600 Mg Alloy. . (2016) 10.1007/978-3-319-48770-0_36
  2. Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji. Effect of Grain Size on Mechanical Properties of Dual Phase Steels Composed of Ferrite and Martensite. . (2016) 10.1557/adv.2016.230
2015
  1. M H Park, A Shibata, N Tsuji. Grain refinement of 2Mn-0.1C steel by repetitive heat treatment and recrystallization. . (2015) 10.1088/1757-899x/89/1/012041
  2. R Gholizadeh, A Shibata, D Terada, N Tsuji. Microstructural evolution of Ti-added interstitial free steel in high strain deformation by hot torsion. . (2015) 10.1088/1757-899x/89/1/012025
  3. M. Chen, A. Matsumoto, A. Shibata, D. Terada, T. Miyazawa, M. Sato, H. Adachi, N. Tsuji. Local Stress Evaluation During Deformation in SUS304 Austenitic Stainless Steel. . (2015) 10.1016/j.matpr.2015.07.436
  4. H. Li, S. Gao, Y. Tian, D. Terada, A. Shibata, N. Tsuji. Influence of Tempering on Mechanical Properties of Ferrite and Martensite Dual Phase Steel. . (2015) 10.1016/j.matpr.2015.07.372
  5. Y. Momotani, A. Shibata, D. Terada, N. Tsuji. Hydrogen Embrittlement Behavior at Different Strain Rates in Low-carbon Martensitic Steel. . (2015) 10.1016/j.matpr.2015.07.387
  6. M. Tsuboi, A. Shibata, D. Terada, N. Tsuji. Crystallographic Characterization of Cleavage Plane in Low-carbon Martensitic Steel. . (2015) 10.1016/j.matpr.2015.07.369
  7. A. Matsumoto, M. Chen, A. Shibata, T. Miyazawa, M. Sato, N. Tsuji. Relationship Between Local Stress Field in Austenite and Variant Selection in Deformation-induced Martensitic Transformation in Fe-24Ni-0.3C Alloy. . (2015) 10.1016/j.matpr.2015.07.438
2014
  1. S Chen, A Shibata, L J Zhao, S Gao, Y Z Tian, N Tsuji. Microstructural evolution of metastable austenitic steel during high-pressure torsion and subsequent heat treatment. . (2014) 10.1088/1757-899x/63/1/012053
2011
  1. Yuki Karasawa, Tso-Fu Mark Chang, Akinobu Shibata, Masato Sone. Strengthening effect of twin boundaries in bcc crystal evaluated through a micro-bending test. . (2011) 10.1557/opl.2011.600
  2. Takashi Nagoshi, Akinobu Shibata, Masato Sone, Yoshikazu Todaka. Mechanical Behavior on Micro-compression Test in Ultra-low Carbon Steel Produced by High Pressure Torsion. . (2011) 10.1557/opl.2011.660
2008
  1. Yuichiro Ogawa, Akinobu Shibata, Chiemi Ishiyama, Masato Sone, Yakichi Higo. Characterization of Local Deformation Microstructure in Ferrous Lath Martensite by using Micro-sized Specimens. . (2008) 10.1557/proc-1137-ee05-32

Presentations TSV

2024
  1. UEJI, Rintaro, SOMEKAWA, Hidetoshi, EMURA, Satoshi, SHIBATA, Akinobu. Yield stress anisotropy of carbon steel with elongated pearlite. TMS 2024 Annual meeting & Exhibition. 2024
2023
  1. SHIBATA, Akinobu, GUTIERREZ URRUTIA, Ivan, 中村 晶子, MORONAGA, Taku, OKADA, Kazuho, HARA, Toru. Three-dimensional analysis on hydrogen-related fracture in high-strength martensitic steel. MRM2023/IUMRS-ICA2023 . 2023 Invited
  2. OKADA, Kazuho, SHIBATA, Akinobu, SASAKI, Taisuke, 松宮久, HONO, Kazuhiro, 辻伸泰. Effect of carbon segregation at prior austenite grain boundary on the hydrogen embrittlement behavior in low-carbon martensitic steels. MRM2023. 2023
  3. SHIBATA, Akinobu, 宮本 吾郎, 森戸 茂一, 中村 晶子, MORONAGA, Taku, KITANO, Houichi, GUTIERREZ URRUTIA, Ivan, HARA, Toru, TSUZAKI, Kaneaki. Substructure and crystallographic features of as-quenched lath martensitic steels. MS&T23. 2023 Invited
  4. 柴田 曉伸, グティエレス ウルティア イヴァン, 中村 晶子, 諸永 拓, 岡田 和歩, 原 徹. 高強度マルテンサイト鋼の水素脆性粒界クラック. 日本機械学会 M&M2023 材料力学カンファレンス. 2023 Invited
  5. リー ゼハオ, 佐々木 泰祐, 上路 林太郎, 木村 勇次, 柴田 曉伸, 宝野 和博. 3 次元アトムプローブによるパーライト鋼中の水素トラップサイトの解析. 日本鉄鋼協会　第186回秋季講演大会. 2023
  6. 伊東達矢, 小川 祐平, Wu Gong, 川崎卓郎, 岡田 和歩, 柴田 曉伸, Stefanus Harjo. その場中性子回折による水素添加SUS310Sの変形メカニズム解析. 日本金属学会 2023年（第173回）秋期講演大会. 2023
  7. SHIBATA, Akinobu, GUTIERREZ URRUTIA, Ivan, 中村 晶子, MORONAGA, Taku, OKADA, Kazuho, Yazid Madi, Jacques Besson, HARA, Toru. Three-dimensional crack propagation behavior in hydrogen-related fracture of high-strength martensitic steel. International Hydrogen Conference. 2023
  8. OKADA, Kazuho, SHIBATA, Akinobu, SASAKI, Taisuke, 松宮久, HONO, Kazuhiro, 辻伸泰. Improvement of resistance against hydrogen embrittlement by increasing carbon segregation at prior austenite grain boundary in low-carbon martensitic steels. International Hydrogen Conference. 2023
  9. GUTIERREZ URRUTIA, Ivan, SHIBATA, Akinobu, TSUZAKI, Kaneaki. Deformation behavior of austenitic Fe-Mn-xAl-yC low density-steels at cryogenic temperatures. FEMS EUROMAT 2023. 2023
  10. GUTIERREZ URRUTIA, Ivan, SHIBATA, Akinobu. Characterization of plasticity in steels by Electron Channeling Contrast Imaging (ECCI) and Transmission Forescattered Electron Imaging (t-FSEI). FEMS EUROMAT 2023. 2023
  11. UEJI, Rintaro, Wu Gong, Stefanus Harjo, Takuro Kawasaki, SHIBATA, Akinobu, KIMURA, Yuuji, INOUE, Tadanobu, Noriyuki Tsuchida. Deformation-induced martensitic transformation at tensile and compressive deformations of high-carbon bainitic steel. International Symposium on New Dvelopments in Advanced High-Strength Sheet Steels. 2023
  12. SHIBATA, Akinobu, GUTIERREZ URRUTIA, Ivan, 中村 晶子, HARA, Toru, TSUZAKI, Kaneaki. THREE-DIMENSIONAL ANALYSIS ON HYDROGEN-RELATED INTERGRANULAR CRACK PROPAGATION IN MARTENSITIC STEEL. 15th International Conference on Fracture. 2023
  13. 岡田 和歩, 柴田 曉伸, 朴明験, 辻伸泰. 1.5 GPa 級マルテンサイト鋼における引張変形中の旧オーステナイト粒界への局所応力・ひずみ集中. 日本鉄鋼協会 第185回春季講演大会. 2023
  14. GUTIERREZ URRUTIA, Ivan, OKADA, Kazuho, SHIBATA, Akinobu. 3D Reconstruction of steel microstructures by 3D Laboratory Diffraction Contrast Tomography (Lab-DCT). 日本鉄鋼協会 第185回春季講演大会. 2023
  15. 柴田 曉伸, グティエレス ウルティア イヴァン, 中村 晶子, 諸永 拓, 岡田 和歩, 原 徹. マルテンサイト鋼の水素脆性クラック伝播に伴う変形下部組織発達. 日本鉄鋼協会 第185回春季講演大会. 2023 Invited
2022
  1. GUTIERREZ URRUTIA, Ivan, SHIBATA, Akinobu, TSUZAKI, Kaneaki. Characterization of stacking faults in an austenitic stainless steel 316L by the electron channeling contrast imaging (ECCI) technique . 日本鉄鋼協会 2022年秋季(第184回)講演大会. 2022
  2. LAN, Xiaodong, OKADA, Kazuho, GUTIERREZ URRUTIA, Ivan, SHIBATA, Akinobu. Quantitative analysis of local plasticity accompanying hydrogen-related fracture in martensitic steel. 日本鉄鋼協会 2022年秋季(第184回)講演大会. 2022
  3. 柴田 曉伸, 宮本 吾郎, 森戸 茂一, 中村 晶子, 諸永 拓, 北野 萌一, グティエレス ウルティア イヴァン, 原 徹, 津﨑 兼彰. IF鋼および低炭素鋼におけるラスマルテンサイトの内部微視組織および結晶学的特徴. 日本鉄鋼協会 2022年秋季(第184回)講演大会. 2022
  4. 岡田 和歩, 柴田 曉伸, 辻 伸泰. 水素脆性擬へき開破壊のミクロメカニズム. 日本鉄鋼協会 2022年秋季(第184回)講演大会. 2022
  5. 岡田 和歩, 柴田 曉伸, 辻 伸泰. マルテンサイト鋼およびフェライト鋼における水素脆性擬へき開破壊の微視的特徴. 水素脆性擬へき開破壊のミクロメカニズム. 2022
  6. 岡田 和歩, 柴田 曉伸, 佐々木 泰祐, 宝野 和博, 辻 伸泰. 旧オーステナイト粒界への炭素偏析がマルテンサイト鋼の水素脆性破壊特性に及ぼす影響. 日本鉄鋼協会第184回秋季講演大会. 2022
  7. 松宮 久, 柴田 曉伸, 辻 伸泰. 低炭素マルテンサイト鋼の疲労試験および定荷重負荷試験における水素脆性破壊挙動. 日本鉄鋼協会 2022年秋季(第184回)講演大会. 2022
  8. 松宮 久, 岡田 和歩, 前河 佳晃, 柴田 曉伸, 辻 伸泰. 低炭素マルテンサイト鋼における水素誘起疲労破壊と微視組織の関係. 日本鉄鋼協会 2022年春季（第183回）講演大会 https://www.isij.or.jp/meeting/2022spring/index.html. 2022
  9. 山下 徹哉, 白 玉, 柴田 曉伸, 足立 大樹, 佐藤 眞直, 辻 伸泰. 中Mn鋼の加工熱処理における組織形成および力学特性に及ぼすAl添加の影響. 日本鉄鋼協会 第183回春季講演大会 https://www.isij.or.jp/meeting/2022spring/index.html. 2022
  10. 柴田 曉伸, グティエレス ウルティア イヴァン, 中村 晶子, 宮本 吾郎, 原 徹, 津﨑 兼彰. マルテンサイト鋼における水素脆性粒界クラックの3次元形態. 日本鉄鋼協会 第183回春季講演大会 https://www.isij.or.jp/meeting/2022spring/index.html. 2022
  11. 上路 林太郎, Wu Gong, Harjo Stefanus, 川崎卓郎, 柴田 曉伸, 木村 勇次, 井上 忠信. その場中性子回折を用いた高炭素TRIP鋼の引張および圧縮変形の比較. 2022年度塑性加工春季講演会 https://confit.atlas.jp/guide/event/jstps2022/top. 2022
  12. SHIBATA, Akinobu, GUTIERREZ URRUTIA, Ivan, 中村 晶子, MIYAMOTO, Goro, Yazid Madi, Jacques Besson, HARA, Toru, TSUZAKI, Kaneaki. Hydrogen-related crack propagation behavior in martensitic steel. The 7th International Conference on Advanced Steels (ICAS 2022). 2022 Invited
  13. 柴田 曉伸. 高強度マルテンサイト鋼の水素脆性. 第 63 回材料強度と破壊総合シンポジウム. 2022 Invited
  14. SHIBATA, Akinobu, 岡田 和歩, 桃谷 裕二, Yu Bai, 辻 伸泰. Microstructural and Crystallographic Studies on Hydrogen-related Fracture in Martensitic Steels. 16th International Conference on Martensitic Transformation 2022 https://www.icomat2022.org/. 2022 Invited
  15. GUTIERREZ URRUTIA, Ivan, SHIBATA, Akinobu, TSUZAKI, Kaneaki. Investigation of the twin structure in lenticular martensite by advanced SEM techniques: Electron Channeling Contrast Imaging (ECCI) and Transmission Kikuchi Diffraction (TKD). 日本鉄鋼協会 2022年春期(第183回)講演大会. 2022
  16. 柴田 曉伸. J-PARCでの高温加工熱処理シミュレータを用いた動的相変態に関する研究. 「第5回元素戦略シンポジウム」～革新的マテリアルでカーボンニュートラルな社会を構築～ https://elements-strategy.jp/symposiumarchive/symposium5. 2022 Invited
2021
  1. 柴田 曉伸, グティエレス ウルティア イヴァン, 岡田 和歩, 宮本 吾郎, Yazied Madi, Jacques Besson, 津﨑 兼彰. マルテンサイト鋼の水素脆性クラック伝播挙動. ISSS 2021ポストシンポジウム. 2021 Invited
  2. 柴田 曉伸, グティエレス ウルティア イヴァン, 中村 晶子, 宮本 吾郎, Yazied Madi, Jacques Besson, 原 徹, 津﨑 兼彰. マルテンサイト鋼における粒界クラックのマルチスケール3次元解析. 日本金属学会2021年秋期（第169回）講演大会. 2021 Invited
  3. GUTIERREZ URRUTIA Ivan, SHIBATA Akinobu, TSUZAKI Kaneaki. Investigation of microbanding in low-density steels at cryogenic temperatures by advanced SEM techniques. 日本金属学会 2021年秋期第169回講演大会. 2021
  4. 岡田 和歩, 柴田 曉伸, 辻 伸泰. マルテンサイト鋼およびフェライト鋼における水素脆性擬へき開破壊の微視的特徴. 日本鉄鋼協会 2021年秋季講演大会. 2021
  5. 岡田 和歩, 辻 伸泰, 柴田 曉伸. BCC鋼の水素脆性擬へき開破壊におけるserrated markingsの起源. 日本鉄鋼協会 2021年秋季（第182回）講演大会. 2021
  6. 柴田 曉伸. マルテンサイト鋼の低温脆性破壊および水素脆性破壊. 日本鉄鋼協会 2021年春季（第181回）講演大会. 2021
  7. 柴田 曉伸, グティエレス ウルティア イヴァン, 岡田 和歩, 宮本 吾郎, Yazied Madi, Jacques Besson, 津﨑 兼彰. マルテンサイト鋼の水素脆性粒界クラック. 日本金属学会2021年春期第168回講演大会. 2021 Invited
  8. 上路 林太郎, 柴田 曉伸, 潮田 浩作, 木村 勇次, 大村 孝仁, 井上 忠信. 低合金TRIP鋼における変形誘起マルテンサイト変態の発生と 母相引張軸方位の関係. 日本金属学会　2021年春期大会. 2021
  9. 上路 林太郎, 木村 勇次, 潮田 浩作, 大村 孝仁, 井上 忠信, 柴田 曉伸. Orientation Dependence of Transformation Induced Plasticity in High Carbon Bainitic Steel. The 19th International Conference on Textures of Materials (ICOTOM 19). 2021
2020
  1. 柴田 曉伸, グティエレス ウルティア イヴァン, 岡田 和歩, 宮本 吾郎, Yazied Madi, Jacques Besson, 辻 伸泰, 津﨑 兼彰. 高強度マルテンサイト鋼の水素脆性粒界クラック. MRMフォーラム2020. 2020 Invited
  2. 加山 達也, 辻 伸泰, 柴田 曉伸, 白 玉. 中Mn 鋼における加工熱処理中の組織形成過程. 日本鉄鋼協会秋季講演大会. 2020
  3. レザ ゴリザデ, 吉田 周平, 白 玉, SHIBATA, Akinobu, 辻 伸泰. Mechanical Response and Microstructure Evolution in CoCrFeMnNi High Entropy Alloy Deformed in Wide Ranges of Strain and Temperature. 日本金属学会秋期講演大会. 2020
  4. Zhangfan Deng, Yu Bai, Myeong-Heom Park, 辻 伸泰, SHIBATA, Akinobu. Mechanical Properties and Deformation Mechanisms of Cu-Zn Alloys with Various Grain Sizes. 日本鉄鋼協会秋季講演大会. 2020
  5. 岡田 和歩, 柴田 曉伸, 辻 伸泰. フェライト鋼の水素脆性擬へき開破壊におけるserrated markingsの起源. 日本鉄鋼協会秋季講演大会. 2020
  6. He Wang, SHIBATA, Akinobu, 辻 伸泰. Crystallographic Analysis on Crack Propagation in Low-cycle Fatigue of Pure Titanium. 日本金属学会秋期講演大会. 2020
  7. 田鎖 悠一, 辻 伸泰, 柴田 曉伸, 朴 明験. Dual-Phase鋼における破壊挙動と局所ひずみ分布の関係. 日本鉄鋼協会秋季講演大会. 2020
  8. 松宮 久, 辻 伸泰, 柴田 曉伸, 岡田 和歩. マルテンサイト鋼とフェライト・パーライト鋼の疲労破壊挙動に及ぼす水素の影響. 日本鉄鋼協会秋季講演大会. 2020
  9. 柴田 曉伸, 岡田 和歩, 辻 伸泰. マルテンサイト鋼の水素脆性. 日本鉄鋼協会　「鉄鋼のマルテンサイト／ベイナイト組織ーその基礎と応用ー」第7回フォーラム. 2020

Misc TSV

2023
  1. 柴田 曉伸. 高強度マルテンサイト鋼における粒界き裂のマルチスケール3次元解析. 金属. 93 [11] (2023) 963-973
2021
  1. 柴田 曉伸, 竹田 泰成, Nokeun Park, Lijia Zhao, Stefanus Harjo, 川崎 卓郎, Wu Gong, 辻 伸泰. In-situ Neutron Diffraction Analysis on Dynamic Ferrite Transformation in Steels. MLF Annual Report 2019. (2021) 46-48
2020
  1. Yan Chong, Ruixiao Zheng, Guanyu Deng, Akinobu Shibata, Nobuhiro Tsuji. Investigation on the Microstructure and Mechanical Properties of Ti-1.0Fe Alloy with Equiaxed α + β Microstructures. Metallurgical and Materials Transactions A. 51 [6] (2020) 2851-2862 10.1007/s11661-020-05760-x
  2. Yan Chong, Tilak Bhattacharjee, Yanzhong Tian, Akinobu Shibata, Nobuhiro Tsuji. Deformation mechanism of bimodal microstructure in Ti-6Al-4V alloy: The effects of intercritical annealing temperature and constituent hardness. Journal of Materials Science & Technology. (2020) 10.1016/j.jmst.2020.08.057
  3. Guanyu Deng, Tilak Bhattacharjee, Yan Chong, Ruixiao Zheng, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Influence of Fe addition in CP titanium on phase transformation, microstructure and mechanical properties during high pressure torsion. Journal of Alloys and Compounds. 822 (2020) 153604 10.1016/j.jallcom.2019.153604
  4. Rajeshwar R. Eleti, Atul H. Chokshi, Akinobu Shibata, Nobuhiro Tsuji. Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory high entropy alloy. Acta Materialia. 183 (2020) 64-77 10.1016/j.actamat.2019.11.001
  5. Yuji Momotani, Akinobu Shibata, Takashi Yonemura, Yu Bai, Nobuhiro Tsuji. Effect of initial dislocation density on hydrogen accumulation behavior in martensitic steel. Scripta Materialia. 178 (2020) 318-323 10.1016/j.scriptamat.2019.11.051
  6. Shuhei YOSHIDA, Takuto IKEUCHI, Tilak BHATTACHARJEE, Yu BAI, Akinobu SHIBATA, Nobuhiro TSUJI. Ultra-Grain Refinement of High Entropy Alloys. Journal of the Japan Society of Powder and Powder Metallurgy. 67 [3] (2020) 113-120 10.2497/jjspm.67.113
  7. Reza Gholizadeh, Akinobu Shibata, Nobuhiro Tsuji. Grain refinement mechanisms in BCC ferritic steel and FCC austenitic steel highly deformed under different temperatures and strain rates. Materials Science and Engineering: A. 790 (2020) 139708 10.1016/j.msea.2020.139708
2019
  1. Rajeshwar R. Eleti, Tilak Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji. Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy. Acta Materialia. 171 (2019) 132-145 10.1016/j.actamat.2019.04.018
  2. Akinobu Shibata, Yasunari Takeda, Nokeun Park, Lijia Zhao, Stefanus Harjo, Takuro Kawasaki, Wu Gong, Nobuhiro Tsuji. Nature of dynamic ferrite transformation revealed by in-situ neutron diffraction analysis during thermomechanical processing. Scripta Materialia. 165 (2019) 44-49 10.1016/j.scriptamat.2019.02.017
  3. Si Gao, Yu Bai, Ruixiao Zheng, Yanzhong Tian, Wenqi Mao, Akinobu Shibata, Nobuhiro Tsuji. Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel. Scripta Materialia. 159 (2019) 28-32 10.1016/j.scriptamat.2018.09.007
  4. Yan Chong, Guanyu Deng, Akinobu Shibata, Nobuhiro Tsuji. Microstructure Evolution and Phase Transformation of Ti‐1.0 wt%Fe Alloy with an Equiaxed α + β Initial Microstructure during High‐Pressure Torsion and Subsequent Annealing. Advanced Engineering Materials. 21 [9] (2019) 1900607 10.1002/adem.201900607
  5. Feifei Hou, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Microstructure evolution during thermomechanical processing in 3Mn-0.1C medium-Mn steel. Materials Science and Technology. 35 [17] (2019) 2101-2108 10.1080/02670836.2018.1548099
  6. Reza Gholizadeh, Akinobu Shibata, Nobuhiro Tsuji. Global view for grain refinement in ultra-low-C IF steel during high-strain deformation at various temperatures and strain rates. Materialia. 6 (2019) 100262 10.1016/j.mtla.2019.100262
  7. Shuhei Yoshida, Takuto Ikeuchi, Yu Bai, Akinobu Shibata, Niels Hansen, Xiaoxu Huang, Nobuhiro Tsuji. Deformation microstructures and strength of face-centered cubic high/medium entropy alloys. IOP Conference Series: Materials Science and Engineering. 580 (2019) 012053 10.1088/1757-899x/580/1/012053 Open Access
  8. Yan Chong, Guanyu Deng, Si Gao, Jangho Yi, Akinobu Shibata, Nobuhiro Tsuji. Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures. Scripta Materialia. 172 (2019) 77-82 10.1016/j.scriptamat.2019.07.015
  9. Shuhei Yoshida, Takuto Ikeuchi, Tilak Bhattacharjee, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys. Acta Materialia. 171 (2019) 201-215 10.1016/j.actamat.2019.04.017
  10. Yu Bai, Yoichiro Matsui, Akinobu Shibata, Nobuhiro Tsuji. Effect of thermomechanical processing at α + γ two-phase temperatures on microstructure and mechanical property of 5Mn-0.1C-2Si medium-manganese steel. Materials Science and Engineering: A. 743 (2019) 57-66 10.1016/j.msea.2018.11.061
  11. Yan Chong, Guanyu Deng, Jangho Yi, Akinobu Shibata, Nobuhiro Tsuji. On the strain hardening abilities of α+β titanium alloys: The roles of strain partitioning and interface length density. Journal of Alloys and Compounds. 811 (2019) 152040 10.1016/j.jallcom.2019.152040
  12. Akinobu Shibata, Masanori Enoki, Nahoko Saji, Hirotaka Tai, Motomichi Koyama, Hiroshi Ohtani, Nobuhiro Tsuji, Kaneaki Tsuzaki. Effect of Hydrogen on the Substructure of Lenticular Martensite in Fe-31Ni Alloy. Metallurgical and Materials Transactions A. 50 [9] (2019) 4027-4036 10.1007/s11661-019-05320-y
2018
  1. Tilak Bhattacharjee, Ruixiao Zheng, Yan Chong, Saad Sheikh, Sheng Guo, Ian Thomas Clark, Toshiro Okawa, Irfan Samad Wani, Pinaki Prasad Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji. Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy. Materials Chemistry and Physics. 210 (2018) 207-212 10.1016/j.matchemphys.2017.06.023
  2. Yan Chong, Tilak Bhattacharjee, Myeong-Heom Park, Akinobu Shibata, Nobuhiro Tsuji. Factors determining room temperature mechanical properties of bimodal microstructures in Ti-6Al-4V alloy. Materials Science and Engineering: A. 730 (2018) 217-222 10.1016/j.msea.2018.06.019
  3. Lijia Zhao, Nokeun Park, Yanzhong Tian, Akinobu Shibata, Nobuhiro Tsuji. Deformation-assisted diffusion for the enhanced kinetics of dynamic phase transformation. Materials Research Letters. 6 [11] (2018) 641-647 10.1080/21663831.2018.1527787 Open Access
  4. Tadahiko Furuta, Izuru Miyazaki, Keiichiro Oh-ishi, Shigeru Kuramoto, Akinobu Shibata, Nobuhiro Tsuji. Characterization of cold-rolled heterogeneous microstructure formed by multimodal deformation in an Fe-Ni-Al-C alloy with lattice softening. Materials & Design. 153 (2018) 166-176 10.1016/j.matdes.2018.04.066
  5. I. Miyazaki, T. Furuta, K. Oh-ishi, T. Nakagaki, S. Kuramoto, A. Shibata, N. Tsuji. Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel. Materials Science and Engineering: A. 721 (2018) 74-80 10.1016/j.msea.2018.02.075
  6. Lijia Zhao, Nokeun Park, Yanzhong Tian, Akinobu Shibata, Nobuhiro Tsuji. Dynamic Transformation Mechanism for Producing Ultrafine Grained Steels. Advanced Engineering Materials. 20 [7] (2018) 1701016 10.1002/adem.201701016
  7. Fei Fei Hou, Atsushi Ito, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Microstructure Evolution and Change in Mechanical Properties of Medium Mn Steels during Thermomechanical Processing. Materials Science Forum. 941 (2018) 346-351 10.4028/www.scientific.net/msf.941.346
  8. Rui Xiao Zheng, Ichiro Kawarada, Wu Gong, Akinobu Shibata, Hidetoshi Somekawa, Shigenobu Ogata, Nobuhiro Tsuji. Effect of Grain Size on Mechanical Properties of Mg-0.3at.%Y Dilute Alloy. Materials Science Forum. 941 (2018) 790-795 10.4028/www.scientific.net/msf.941.790
2017
  1. Y.Z. Tian, Y. Bai, L.J. Zhao, S. Gao, H.K. Yang, A. Shibata, Z.F. Zhang, N. Tsuji. A novel ultrafine-grained Fe 22Mn 0.6C TWIP steel with superior strength and ductility. Materials Characterization. 126 (2017) 74-80 10.1016/j.matchar.2016.12.026
  2. Ruixiao Zheng, Tilak Bhattacharjee, Si Gao, Wu Gong, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji. Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy. IOP Conference Series: Materials Science and Engineering. 219 (2017) 012055 10.1088/1757-899x/219/1/012055 Open Access
  3. Si Gao, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Microstructures and mechanical property of a Fe-Ni-Al-C alloy containing B2 intermetallic compounds. IOP Conference Series: Materials Science and Engineering. 219 (2017) 012020 10.1088/1757-899x/219/1/012020 Open Access
  4. Yuji Momotani, Akinobu Shibata, Daisuke Terada, Nobuhiro Tsuji. Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel. International Journal of Hydrogen Energy. 42 [5] (2017) 3371-3379 10.1016/j.ijhydene.2016.09.188
  5. Mizuki Tsuboi, Akinobu Shibata, Daisuke Terada, Nobuhiro Tsuji. Role of Different Kinds of Boundaries Against Cleavage Crack Propagation in Low-Temperature Embrittlement of Low-Carbon Martensitic Steel. Metallurgical and Materials Transactions A. 48 [7] (2017) 3261-3268 10.1007/s11661-017-4107-9
  6. Akinobu Shibata, Takahiro Matsuoka, Akira Ueno, Nobuhiro Tsuji. Fracture surface topography analysis of the hydrogen-related fracture propagation process in martensitic steel. International Journal of Fracture. 205 [1] (2017) 73-82 10.1007/s10704-017-0182-6
  7. L Zhao, N Park, Y Tian, A Shibata, N Tsuji. Realizing Ultrafine Grained Steel by Simple Hot Deformation Using Dynamic Transformation and Subsequent Dynamic Recrystallization Mechanisms. IOP Conference Series: Materials Science and Engineering. 194 (2017) 012026 10.1088/1757-899x/194/1/012026 Open Access
  8. Akinobu Shibata, Fumitaka Ichikawa, Hiroki Adachi, Tohru Yamasaki, Nobuhiro Tsuji. Cooperative strain accommodation over grains in martensitic transformation from Fe-Ni nanocrystalline austenite. Philosophical Magazine Letters. 97 [4] (2017) 132-139 10.1080/09500839.2017.1292057
  9. Lijia Zhao, Nokeun Park, Yanzhong Tian, Shuai Chen, Akinobu Shibata, Nobuhiro Tsuji. Novel thermomechanical processing methods for achieving ultragrain refinement of low-carbon steel without heavy plastic deformation. Materials Research Letters. 5 [1] (2017) 61-68 10.1080/21663831.2016.1208301 Open Access
  10. Guanyu Deng, Tilak Bhattacharjee, Yan Chong, Ruixiao Zheng, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji. Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing. IOP Conference Series: Materials Science and Engineering. 194 (2017) 012020 10.1088/1757-899x/194/1/012020 Open Access
  11. Yu Bai, Yanzhong Tian, Si Gao, Akinobu Shibata, Nobuhiro Tsuji. Hydrogen embrittlement behaviors of ultrafine-grained 22Mn–0.6C austenitic twinning induced plasticity steel. Journal of Materials Research. 32 [24] (2017) 4592-4604 10.1557/jmr.2017.351
  12. Daisuke Terada, Gosuke Ikeda, Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji. Reason for high strength and good ductility in dual phase steels composed of soft ferrite and hard martensite. IOP Conference Series: Materials Science and Engineering. 219 (2017) 012008 10.1088/1757-899x/219/1/012008 Open Access
  13. Akinobu Shibata, Yuji Momotani, Tamotsu Murata, Takahiro Matsuoka, Mizuki Tsuboi, Nobuhiro Tsuji. Microstructural and crystallographic features of hydrogen-related fracture in lath martensitic steels. Materials Science and Technology. 33 [13] (2017) 1524-1532 10.1080/02670836.2017.1312210
  14. Yan Chong, Tilak Bhattacharjee, Jangho Yi, Akinobu Shibata, Nobuhiro Tsuji. Mechanical properties of fully martensite microstructure in Ti-6Al-4V alloy transformed from refined beta grains obtained by rapid heat treatment (RHT). Scripta Materialia. 138 (2017) 66-70 10.1016/j.scriptamat.2017.05.038
  15. Lijia Zhao, Nokeun Park, Yanzhong Tian, Akinobu Shibata, Nobuhiro Tsuji. Mechanism of Dynamic Formation of Ultrafine Ferrite Grains during High Temperature Processing in Steel. Advanced Engineering Materials. 19 [3] (2017) 1600778 10.1002/adem.201600778
  16. Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji. Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy. IOP Conference Series: Materials Science and Engineering. 194 (2017) 012016 10.1088/1757-899x/194/1/012016 Open Access
  17. Yan Chong, Tilak Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji. Investigation of the grain size effect on mechanical properties of Ti-6Al-4V alloy with equiaxed and bimodal microstructures. IOP Conference Series: Materials Science and Engineering. 219 (2017) 012013 10.1088/1757-899x/219/1/012013 Open Access
2016
  1. Y. Bai, Y. Momotani, M.C. Chen, A. Shibata, N. Tsuji. Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel. Materials Science and Engineering: A. 651 (2016) 935-944 10.1016/j.msea.2015.11.017
  2. Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji. Effect of Grain Size on Mechanical Properties of Dual Phase Steels Composed of Ferrite and Martensite. MRS Advances. 1 [12] (2016) 811-816 10.1557/adv.2016.230
  3. Atsushi Ito, Akinobu Shibata, Nobuhiro Tsuji. Thermomechanical Processing of Medium Manganese Steels. Materials Science Forum. 879 (2016) 90-94 10.4028/www.scientific.net/msf.879.90
  4. Lijia Zhao, Nokeun Park, Yanzhong Tian, Akinobu Shibata, Nobuhiro Tsuji. Combination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties. Scientific Reports. 6 [1] (2016) 10.1038/srep39127 Open Access
  5. Yanzhong Tian, Akinobu Shibata, Zhefeng Zhang, Nobuhiro Tsuji. Ductility Sensitivity to Stacking Fault Energy and Grain Size in Cu–Al Alloys. Materials Research Letters. 4 [2] (2016) 112-117 10.1080/21663831.2015.1136969 Open Access
  6. Y.Z. Tian, L.J. Zhao, N. Park, R. Liu, P. Zhang, Z.J. Zhang, A. Shibata, Z.F. Zhang, N. Tsuji. Revealing the deformation mechanisms of Cu–Al alloys with high strength and good ductility. Acta Materialia. 110 (2016) 61-72 10.1016/j.actamat.2016.03.015
  7. Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji, Chaoli Ma. Effect of Accumulative Roll Bonding (ARB) and Subsequent Aging on Microstructure and Mechanical Properties of 2024 Al Alloy. MATERIALS TRANSACTIONS. 57 [9] (2016) 1462-1470 10.2320/matertrans.mh201512
2015
  1. R Gholizadeh, A Shibata, D Terada, N Tsuji. Microstructural evolution of Ti-added interstitial free steel in high strain deformation by hot torsion. IOP Conference Series: Materials Science and Engineering. 89 (2015) 012025 10.1088/1757-899x/89/1/012025 Open Access
  2. H. Li, S. Gao, Y. Tian, D. Terada, A. Shibata, N. Tsuji. Influence of Tempering on Mechanical Properties of Ferrite and Martensite Dual Phase Steel. Materials Today: Proceedings. 2 (2015) S667-S671 10.1016/j.matpr.2015.07.372 Open Access
  3. Akinobu Shibata, Tamotsu Murata, Hiroshi Takahashi, Takahiro Matsuoka, Nobuhiro Tsuji. Characterization of Hydrogen-Related Fracture Behavior in As-Quenched Low-Carbon Martensitic Steel and Tempered Medium-Carbon Martensitic Steel. Metallurgical and Materials Transactions A. 46 [12] (2015) 5685-5696 10.1007/s11661-015-3176-x
  4. M. Tsuboi, A. Shibata, D. Terada, N. Tsuji. Crystallographic Characterization of Cleavage Plane in Low-carbon Martensitic Steel. Materials Today: Proceedings. 2 (2015) S655-S658 10.1016/j.matpr.2015.07.369 Open Access
  5. Y. Z. Tian, L. J. Zhao, S. Chen, A. Shibata, Z. F. Zhang, N. Tsuji. Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes. Scientific Reports. 5 [1] (2015) 10.1038/srep16707 Open Access
  6. A. Matsumoto, M. Chen, A. Shibata, T. Miyazawa, M. Sato, N. Tsuji. Relationship Between Local Stress Field in Austenite and Variant Selection in Deformation-induced Martensitic Transformation in Fe-24Ni-0.3C Alloy. Materials Today: Proceedings. 2 (2015) S945-S948 10.1016/j.matpr.2015.07.438 Open Access
  7. M. Chen, A. Matsumoto, A. Shibata, D. Terada, T. Miyazawa, M. Sato, H. Adachi, N. Tsuji. Local Stress Evaluation During Deformation in SUS304 Austenitic Stainless Steel. Materials Today: Proceedings. 2 (2015) S937-S940 10.1016/j.matpr.2015.07.436 Open Access
  8. Y. Momotani, A. Shibata, D. Terada, N. Tsuji. Hydrogen Embrittlement Behavior at Different Strain Rates in Low-carbon Martensitic Steel. Materials Today: Proceedings. 2 (2015) S735-S738 10.1016/j.matpr.2015.07.387 Open Access
  9. M H Park, A Shibata, N Tsuji. Grain refinement of 2Mn-0.1C steel by repetitive heat treatment and recrystallization. IOP Conference Series: Materials Science and Engineering. 89 (2015) 012041 10.1088/1757-899x/89/1/012041 Open Access
2014
  1. Y. Z. Tian, Y. Bai, M. C. Chen, A. Shibata, D. Terada, N. Tsuji. Enhanced Strength and Ductility in an Ultrafine-Grained Fe-22Mn-0.6C Austenitic Steel Having Fully Recrystallized Structure. Metallurgical and Materials Transactions A. 45 [12] (2014) 5300-5304 10.1007/s11661-014-2552-2
  2. Si Gao, Akinobu Shibata, Meichuan Chen, Nokeun Park, Nobuhiro Tsuji. Correlation between Continuous/Discontinuous Yielding and Hall–Petch Slope in High Purity Iron. MATERIALS TRANSACTIONS. 55 [1] (2014) 69-72 10.2320/matertrans.ma201326
  3. Y. Z. Tian, L. J. Zhao, S. Chen, D. Terada, A. Shibata, N. Tsuji. Optimizing strength and ductility in Cu–Al alloy with recrystallized nanostructures formed by simple cold rolling and annealing. Journal of Materials Science. 49 [19] (2014) 6629-6639 10.1007/s10853-014-8299-8
  4. S Chen, A Shibata, L J Zhao, S Gao, Y Z Tian, N Tsuji. Microstructural evolution of metastable austenitic steel during high-pressure torsion and subsequent heat treatment. IOP Conference Series: Materials Science and Engineering. 63 (2014) 012053 10.1088/1757-899x/63/1/012053 Open Access
  5. Si Gao, Meichuan Chen, Shuai Chen, Naoya Kamikawa, Akinobu Shibata, Nobuhiro Tsuji. Yielding Behavior and Its Effect on Uniform Elongation of Fine Grained IF Steel. MATERIALS TRANSACTIONS. 55 [1] (2014) 73-77 10.2320/matertrans.ma201317
  6. Tadashi Maki, Tadashi Furuhara, Nobuhiro Tsuji, Shigekazu Morito, Goro Miyamoto, Akinobu Shibata. Thermomechanical Processing of Steel –Past, Present and Future–. Tetsu-to-Hagane. 100 [9] (2014) 1062-1075 10.2355/tetsutohagane.100.1062 Open Access
  7. Nokeun Park, Lijia Zhao, Akinobu Shibata, Nobuhiro Tsuji. Dynamic Ferrite Transformation Behaviors in 6Ni-0.1C Steel. JOM. 66 [5] (2014) 765-773 10.1007/s11837-014-0913-3
  8. Shuai Chen, Akinobu Shibata, Si Gao, Nobuhiro Tsuji. Formation of Fully Annealed Nanocrystalline Austenite in Fe–Ni–C Alloy. MATERIALS TRANSACTIONS. 55 [1] (2014) 223-226 10.2320/matertrans.m2013324
  9. Takashi Nagoshi, Akinobu Shibata, Yoshikazu Todaka, Tatsuo Sato, Masato Sone. Mechanical behavior of a microsized pillar fabricated from ultrafine-grained ferrite evaluated by a microcompression test. Acta Materialia. 73 (2014) 12-18 10.1016/j.actamat.2014.03.048
  10. Si Gao, Meichuan Chen, Mohit Joshi, Akinobu Shibata, Nobuhiro Tsuji. Yielding behavior and its effect on uniform elongation in IF steel with various grain sizes. Journal of Materials Science. 49 [19] (2014) 6536-6542 10.1007/s10853-014-8233-0
2013
  1. Nokeun Park, Sunisa Khamsuk, Akinobu Shibata, Nobuhiro Tsuji. Occurrence of dynamic ferrite transformation in low-carbon steel above Ae3. Scripta Materialia. 68 [7] (2013) 538-541 10.1016/j.scriptamat.2012.12.010
  2. Meichuan Chen, Daisuke Terada, Akinobu Shibata, Nobuhiro Tsuji. Identical Area Observations of Deformation-Induced Martensitic Transformation in SUS304 Austenitic Stainless Steel. MATERIALS TRANSACTIONS. 54 [3] (2013) 308-313 10.2320/matertrans.mbw201212
  3. N. Park, S. Khamsuk, A. Shibata, N. Tsuji. Effect of austenite grain size on kinetics of dynamic ferrite transformation in low carbon steel. Scripta Materialia. 68 [8] (2013) 611-614 10.1016/j.scriptamat.2012.12.021
  4. Nokeun Park, Akinobu Shibata, Daisuke Terada, Nobuhiro Tsuji. Flow stress analysis for determining the critical condition of dynamic ferrite transformation in 6Ni–0.1C steel. Acta Materialia. 61 [1] (2013) 163-173 10.1016/j.actamat.2012.09.043
  5. Hamidreza Jafarian, Ehsan Borhani, Akinobu Shibata, Nobuhiro Tsuji. Variant selection of martensite transformation from ultrafine-grained austenite in Fe–Ni–C alloy. Journal of Alloys and Compounds. 577 (2013) S668-S672 10.1016/j.jallcom.2012.04.057
  6. Akinobu Shibata, Shohei Daido, Daisuke Terada, Nobuhiro Tsuji. Microstructures of Pearlite and Martensite Transformed from Ultrafine-Grained Austenite Fabricated through Cyclic Heat Treatment in Medium Carbon Steels. MATERIALS TRANSACTIONS. 54 [9] (2013) 1570-1574 10.2320/matertrans.mh201312
  7. Nokeun Park, Sunisa Khamsuk, Akinobu Shibata, Nobuhiro Tsuji. Dynamic Softening of Flow Stress during Dynamic Ferrite Transformation. Materials Science Forum. 753 (2013) 510-513 10.4028/www.scientific.net/msf.753.510
  8. Taiki Uemura, Tso-Fu Mark Chang, Akinobu Shibata, Masato Sone. Abnormally large Ni grains epitaxially grown by electrodeposition on Cu substrate. Thin Solid Films. 529 (2013) 385-388 10.1016/j.tsf.2012.03.062
  9. Nao Shinoda, Tetsuya Shimizu, Tso-Fu Mark Chang, Akinobu Shibata, Masato Sone. Cu electroplating using suspension of supercritical carbon dioxide in copper-sulfate-based electrolyte with Cu particles. Thin Solid Films. 529 (2013) 29-33 10.1016/j.tsf.2012.03.089
  10. Akinobu Shibata, Takashi Nagoshi, Masato Sone, Yakichi Higo. Micromechanical characterization of deformation behavior in ferrous lath martensite. Journal of Alloys and Compounds. 577 (2013) S555-S558 10.1016/j.jallcom.2012.01.066
  11. Tetsuya Shimizu, Nao Shinoda, Tso-Fu Mark Chang, Akinobu Shibata, Masato Sone. Crystal growth on novel Cu electroplating using suspension of supercritical CO 2 in electrolyte with Cu particles. Surface and Coatings Technology. 231 (2013) 77-80 10.1016/j.surfcoat.2012.03.058
2012
  1. Akinobu Shibata, Hamidreza Jafarian, Daisuke Terada, Nobuhiro Tsuji. Crystallographic Features of Martensite Transformed from Ultrafine Grained Austenite Fabricated by Severe Plastic Deformation. Materials Science Forum. 706-709 (2012) 1835-1840 10.4028/www.scientific.net/msf.706-709.1835
  2. Nao Shinoda, Tetsuya Shimizu, Tso-Fu Mark Chang, Akinobu Shibata, Masato Sone. Filling of nanoscale holes with high aspect ratio by Cu electroplating using suspension of supercritical carbon dioxide in electrolyte with Cu particles. Microelectronic Engineering. 97 (2012) 126-129 10.1016/j.mee.2012.02.031
  3. Akinobu Shibata, Hiroshi Takahashi, Nobuhiro Tsuji. Microstructural and Crystallographic Features of Hydrogen-related Crack Propagation in Low Carbon Martensitic Steel. ISIJ International. 52 [2] (2012) 208-212 10.2355/isijinternational.52.208 Open Access
  4. Ehsan Borhani, Hamidreza Jafarian, Akinobu Shibata, Nobuhiro Tsuji. Texture Evolution in Al–0.2 mass%Sc Alloy during ARB Process and Subsequent Annealing. MATERIALS TRANSACTIONS. 53 [11] (2012) 1863-1869 10.2320/matertrans.ma201223
  5. Akinobu Shibata, Hamidreza Jafarian, Nobuhiro Tsuji. Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe–24Ni–0.3C Alloy. MATERIALS TRANSACTIONS. 53 [1] (2012) 81-86 10.2320/matertrans.md201121
2011
  1. Nokeun Park, Akinobu Shibata, Nobuhiro Tsuji. Systematic Approach to Clarify the Mechanism of Dynamic Transformation in Fe-6Ni-0.1C Alloy. Advanced Materials Research. 409 (2011) 707-712 10.4028/www.scientific.net/amr.409.707
  2. Takashi Nagoshi, Akinobu Shibata, Masato Sone, Yoshikazu Todaka. Mechanical Behavior on Micro-compression Test in Ultra-low Carbon Steel Produced by High Pressure Torsion. MRS Proceedings. 1297 (2011) 10.1557/opl.2011.660
  3. Nobuyuki Yoshida, Toshikazu Tasaki, Tso-Fu Mark Chang, Akinobu Shibata, Chiemi Ishiyama, Masato Sone. Pd–Ni–P metallic glass pattern with controllable microstructure fabricated by electroless alloy plating. Microelectronic Engineering. 88 [8] (2011) 2401-2404 10.1016/j.mee.2011.02.081
  4. Yuki Karasawa, Tso-Fu Mark Chang, Akinobu Shibata, Masato Sone. Strengthening effect of twin boundaries in bcc crystal evaluated through a micro-bending test. MRS Proceedings. 1297 (2011) 10.1557/opl.2011.600
  5. H. R. Jafarian, E. Borhani, A. Shibata, D. Terada, N. Tsuji. Martensite/austenite interfaces in ultrafine grained Fe–Ni–C alloy. Journal of Materials Science. 46 [12] (2011) 4216-4220 10.1007/s10853-010-5018-y
2010
  1. Akinobu Shibata, Shigekazu Morito, Tadashi Furuhara, Tadashi Maki. Characterization of Substructure Evolution in Ferrous Lenticular Martensite. Materials Science Forum. 654-656 (2010) 1-6 10.4028/www.scientific.net/msf.654-656.1
  2. Chiemi Ishiyama, Akinobu Shibata, Masato Sone, Yakichi Higo. Effects of Aspect Ratio of Photoresist Patterns on Adhesive Strength between Microsized SU-8 Columns and Silicon Substrate under Bend Loading Condition. Japanese Journal of Applied Physics. 49 [6] (2010) 06GN14 10.1143/jjap.49.06gn14
  3. Hiroki Uchiyama, Masato Sone, Akinobu Shibata, Yakichi Higo. Effects of CO[sub 2] on Ni–P Electroless Plating in an Emulsion of Supercritical CO[sub 2]. Journal of The Electrochemical Society. 157 [10] (2010) D550 10.1149/1.3479189
  4. Akinobu Shibata, Yuichiro Ogawa, Masato Sone, Yakichi Higo. Direct Observation of the Change in Microstructure with Deformation in Ferrous Lath Martensite by Using Micro-Sized Specimen. Materials Science Forum. 638-642 (2010) 3514-3519 10.4028/www.scientific.net/msf.638-642.3514
  5. Tso-Fu Mark Chang, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Yakichi Higo. Bright nickel film deposited by supercritical carbon dioxide emulsion using additive-free Watts bath. Electrochimica Acta. 55 [22] (2010) 6469-6475 10.1016/j.electacta.2010.06.037
  6. Hamidreza Jafarian, Ehsan Borhani, Akinobu Shibata, Daisuke Terada, Nobuhiro Tsuji. Martensitic Transformation from Ultrafine Grained Austenite Fabricated by ARB in Fe-24Ni-0.3C. Materials Science Forum. 667-669 (2010) 361-366 10.4028/www.scientific.net/msf.667-669.361
  7. Akinobu Shibata, Takashi Nagoshi, Masato Sone, Shigekazu Morito, Yakichi Higo. Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite using a micro-bending test. Materials Science and Engineering: A. 527 [29-30] (2010) 7538-7544 10.1016/j.msea.2010.08.026
  8. Akinobu Shibata, Homuro Noda, Masato Sone, Yakichi Higo. Microstructural development of an electrodeposited Ni layer. Thin Solid Films. 518 [18] (2010) 5153-5158 10.1016/j.tsf.2010.03.016
  9. Tatsuro Endo, Akinobu Shibata, Yasuko Yanagida, Yakichi Higo, Takeshi Hatsuzawa. Localized surface plasmon resonance optical characteristics for hydrogen peroxide using polyvinylpyrrolidone coated silver nanoparticles. Materials Letters. 64 [19] (2010) 2105-2108 10.1016/j.matlet.2010.06.054
  10. Akinobu Shibata, Masato Sone, Yakichi Higo. Characterization of deformation-induced structural change of Pd78Cu6Si16 metallic glass using a micro-sized cantilever-beam specimen. Scripta Materialia. 62 [5] (2010) 309-312 10.1016/j.scriptamat.2009.11.029
  11. Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Susumu Edo, Masatoshi Tokita, Junji Watanabe, Yakichi Higo. Impregnation of Ni–P metal into polymer substrate via catalyzation in Sc-CO2 and electroless plating in Sc-CO2 emulsion. Surface and Coatings Technology. 204 [11] (2010) 1785-1792 10.1016/j.surfcoat.2009.11.010
  12. A. Shibata, T. Furuhara, T. Maki. Interphase boundary structure and accommodation mechanism of lenticular martensite in Fe–Ni alloys. Acta Materialia. 58 [9] (2010) 3477-3492 10.1016/j.actamat.2010.02.022
2009
  1. Byung hoon Woo, Masato Sone, Shibata Akinobu, Chiemi Ishiyama, Kaoru Masuda, Masahiro Yamagata, Yakichi Higo. Metallization on polymer via quantitatively controlled catalyzation in Sc–CO2 and electroless plating with Sc–CO2 emulsion for micro and nano-device. Microelectronic Engineering. 86 [4-6] (2009) 1179-1182 10.1016/j.mee.2008.11.096
  2. Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Kaoru Masuda, Masahiro Yamagata, Yakichi Higo. Effects of Sc-CO2 catalyzation in metallization on polymer by electroless plating. Surface and Coatings Technology. 203 [14] (2009) 1971-1978 10.1016/j.surfcoat.2009.01.031
  3. A. Shibata, S. Morito, T. Furuhara, T. Maki. Substructures of lenticular martensites with different martensite start temperatures in ferrous alloys. Acta Materialia. 57 [2] (2009) 483-492 10.1016/j.actamat.2008.09.030
  4. A. Shibata, Y. Imamura, M. Sone, C. Ishiyama, Y. Higo. Pd–Ni–P metallic glass film fabricated by electroless alloy plating. Thin Solid Films. 517 [6] (2009) 1935-1938 10.1016/j.tsf.2008.09.101
  5. 柴田 曉伸, Toshio Murakami, Shigekazu Morito, Tadashi Furuhara, Tadashi Maki. The Origin of Midrib in Lenticular Martensite. Journal of the Japan Institute of Metals. 73 [4] (2009) 290-298 10.2320/jinstmet.73.290
  6. G. Miyamoto, A. Shibata, T. Maki, T. Furuhara. Precise measurement of strain accommodation in austenite matrix surrounding martensite in ferrous alloys by electron backscatter diffraction analysis. Acta Materialia. 57 [4] (2009) 1120-1131 10.1016/j.actamat.2008.10.050
2008
  1. Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, Kaoru Masuda, Masahiro Yamagata, Tatsuro Endo, Takeshi Hatsuzawa, Yakichi Higo. Metallization on polymer by catalyzation in supercritical CO2 and electroless plating in dense CO2 emulsion. Surface and Coatings Technology. 202 [16] (2008) 3921-3926 10.1016/j.surfcoat.2008.01.037
  2. Akinobu Shibata, Toshio Murakami, Shigekazu Morito, Tadashi Furuhara, Tadashi Maki. The Origin of Midrib in Lenticular Martensite. MATERIALS TRANSACTIONS. 49 [6] (2008) 1242-1248 10.2320/matertrans.mra2007296
2006
  1. A. Shibata, H. Yonezawa, K. Yabuuchi, S. Morito, T. Furuhara, T. Maki. Relation between martensite morphology and volume change accompanying fcc to bcc martensitic transformation in Fe–Ni–Co alloys. Materials Science and Engineering: A. 438-440 (2006) 241-245 10.1016/j.msea.2005.12.044
2005
  1. A. Shibata, S. Morito, T. Furuhara, T. Maki. Local orientation change inside lenticular martensite plate in Fe–33Ni alloy. Scripta Materialia. 53 [5] (2005) 597-602 10.1016/j.scriptamat.2005.04.023

Published patent applications TSV

    ▲ Go to the top of this page