publication_type publication_year number author title doi reported_at Proceeding 2023 1 A. Shibata, N. Tsuchida, S. Harjo, T. Inoue, T. Kawasaki, W. Gong, Y. Kimura, R. Ueji https://doi.org/10.33313/298/030 2024-04-25 18:07:32 +0900 Proceeding 2019 1 Shuhei Yoshida, Takuto Ikeuchi, Yu Bai, Akinobu Shibata, Niels Hansen, Xiaoxu Huang, Nobuhiro Tsuji Deformation microstructures and strength of face-centered cubic high/medium entropy alloys https://doi.org/10.1088/1757-899x/580/1/012053 2024-04-25 18:07:32 +0900 Proceeding 2017 1 Yan Chong, Tilak Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji Investigation of the grain size effect on mechanical properties of Ti-6Al-4V alloy with equiaxed and bimodal microstructures https://doi.org/10.1088/1757-899x/219/1/012013 2024-04-25 18:07:32 +0900 Proceeding 2017 2 Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji Change of deformation mechanisms in ultrafine grained Mg-Zn-Zr-Ca alloy https://doi.org/10.1088/1757-899x/194/1/012016 2024-04-25 18:07:32 +0900 Proceeding 2017 3 L Zhao, N Park, Y Tian, A Shibata, N Tsuji Realizing Ultrafine Grained Steel by Simple Hot Deformation Using Dynamic Transformation and Subsequent Dynamic Recrystallization Mechanisms https://doi.org/10.1088/1757-899x/194/1/012026 2024-04-25 18:07:32 +0900 Proceeding 2017 4 Ruixiao Zheng, Tilak Bhattacharjee, Si Gao, Wu Gong, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji Enhanced mechanical properties in fully recrystallized ultrafine grained ZKX600 Mg alloy https://doi.org/10.1088/1757-899x/219/1/012055 2024-04-25 18:07:32 +0900 Proceeding 2017 5 Guanyu Deng, Tilak Bhattacharjee, Yan Chong, Ruixiao Zheng, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing https://doi.org/10.1088/1757-899x/194/1/012020 2024-04-25 18:07:32 +0900 Proceeding 2017 6 Si Gao, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji Microstructures and mechanical property of a Fe-Ni-Al-C alloy containing B2 intermetallic compounds https://doi.org/10.1088/1757-899x/219/1/012020 2024-04-25 18:07:32 +0900 Proceeding 2017 7 Daisuke Terada, Gosuke Ikeda, Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji Reason for high strength and good ductility in dual phase steels composed of soft ferrite and hard martensite https://doi.org/10.1088/1757-899x/219/1/012008 2024-04-25 18:07:32 +0900 Proceeding 2016 1 Ruixiao Zheng, Tilak Bhattacharjee, Akinobu Shibata, Taisuke Sasaki, Kazuhiro Hono, Nobuhiro Tsuji Strength and Ductility of Ultrafine Grained ZKX600 Mg Alloy https://doi.org/10.1007/978-3-319-48770-0_36 2024-04-25 18:07:32 +0900 Proceeding 2016 2 Myeong-heom Park, Akinobu Shibata, Nobuhiro Tsuji Effect of Grain Size on Mechanical Properties of Dual Phase Steels Composed of Ferrite and Martensite https://doi.org/10.1557/adv.2016.230 2024-04-25 18:07:32 +0900 Proceeding 2015 1 M H Park, A Shibata, N Tsuji Grain refinement of 2Mn-0.1C steel by repetitive heat treatment and recrystallization https://doi.org/10.1088/1757-899x/89/1/012041 2024-04-25 18:07:32 +0900 Proceeding 2015 2 R Gholizadeh, A Shibata, D Terada, N Tsuji Microstructural evolution of Ti-added interstitial free steel in high strain deformation by hot torsion https://doi.org/10.1088/1757-899x/89/1/012025 2024-04-25 18:07:32 +0900 Proceeding 2015 3 M. Chen, A. Matsumoto, A. Shibata, D. Terada, T. Miyazawa, M. Sato, H. Adachi, N. Tsuji Local Stress Evaluation During Deformation in SUS304 Austenitic Stainless Steel https://doi.org/10.1016/j.matpr.2015.07.436 2024-04-25 18:07:32 +0900 Proceeding 2015 4 H. Li, S. Gao, Y. Tian, D. Terada, A. Shibata, N. Tsuji Influence of Tempering on Mechanical Properties of Ferrite and Martensite Dual Phase Steel https://doi.org/10.1016/j.matpr.2015.07.372 2024-04-25 18:07:32 +0900 Proceeding 2015 5 Y. Momotani, A. Shibata, D. Terada, N. Tsuji Hydrogen Embrittlement Behavior at Different Strain Rates in Low-carbon Martensitic Steel https://doi.org/10.1016/j.matpr.2015.07.387 2024-04-25 18:07:32 +0900 Proceeding 2015 6 M. Tsuboi, A. Shibata, D. Terada, N. Tsuji Crystallographic Characterization of Cleavage Plane in Low-carbon Martensitic Steel https://doi.org/10.1016/j.matpr.2015.07.369 2024-04-25 18:07:32 +0900 Proceeding 2015 7 A. Matsumoto, M. Chen, A. Shibata, T. Miyazawa, M. Sato, N. Tsuji Relationship Between Local Stress Field in Austenite and Variant Selection in Deformation-induced Martensitic Transformation in Fe-24Ni-0.3C Alloy https://doi.org/10.1016/j.matpr.2015.07.438 2024-04-25 18:07:32 +0900 Proceeding 2014 1 S Chen, A Shibata, L J Zhao, S Gao, Y Z Tian, N Tsuji Microstructural evolution of metastable austenitic steel during high-pressure torsion and subsequent heat treatment https://doi.org/10.1088/1757-899x/63/1/012053 2024-04-25 18:07:32 +0900 Proceeding 2011 1 Yuki Karasawa, Tso-Fu Mark Chang, Akinobu Shibata, Masato Sone Strengthening effect of twin boundaries in bcc crystal evaluated through a micro-bending test https://doi.org/10.1557/opl.2011.600 2024-04-25 18:07:32 +0900 Proceeding 2011 2 Takashi Nagoshi, Akinobu Shibata, Masato Sone, Yoshikazu Todaka Mechanical Behavior on Micro-compression Test in Ultra-low Carbon Steel Produced by High Pressure Torsion https://doi.org/10.1557/opl.2011.660 2024-04-25 18:07:32 +0900 Proceeding 2008 1 Yuichiro Ogawa, Akinobu Shibata, Chiemi Ishiyama, Masato Sone, Yakichi Higo Characterization of Local Deformation Microstructure in Ferrous Lath Martensite by using Micro-sized Specimens https://doi.org/10.1557/proc-1137-ee05-32 2024-04-25 18:07:32 +0900