publication_type publication_year number author title journal_title volume_number issue_number start_page end_page doi reported_at Paper 2024 1 Tomotaka Hatakeyama, Kota Sawada Materials Letters 363 136277 https://doi.org/10.1016/j.matlet.2024.136277 2024-04-27 07:49:51 +0900 Paper 2023 1 澤田 浩太, 谷内 泰志, 野島 健大, 木村 一弘, 木村尭弘, 野村恭兵, 齋藤規子, 森田 聡, 早川弘之, 杉内栄夫, 大櫃和成, 石原潤一, 屋口正次, 西沢孝壽, 飯田英男, 大井浩二, 西岡智也, 江見直哉, 岡田浩一, 駒井伸好, 林 恭平, 富永　公彦 ASME Grade 91鋼大型溶接継手の長時間クリープ損傷の非破壊評価とその有効性検討 Zairyo/Journal of the Society of Materials Science, Japan 72 10 705 712 2024-04-27 07:49:51 +0900 Paper 2023 2 Kota Sawada, Yasushi Taniuchi, Kaoru Sekido, Takehiro Nojima, Tomotaka Hatakeyama, Kazuhiro Kimura Science and Technology of Advanced Materials: Methods 3 1 https://doi.org/10.1080/27660400.2023.2284129 2024-04-27 07:49:51 +0900 Paper 2023 3 Tomotaka Hatakeyama, Kaoru Sekido, Kota Sawada ISIJ International 63 5 910 918 https://doi.org/10.2355/isijinternational.isijint-2022-558 2024-04-27 07:49:51 +0900 Paper 2023 4 Tomotaka Hatakeyama, Kota Sawada, Kaoru Sekido, Kazuhiro Kimura Materials Science and Engineering: A 882 145487 https://doi.org/10.1016/j.msea.2023.145487 2024-04-27 07:49:51 +0900 Paper 2023 5 Toshihiro Ohtani, Yutaka Ishii, Masaaki Tabuchi, Hiromichi Hongo, Kota Sawada Materials Characterization 197 112657 https://doi.org/10.1016/j.matchar.2023.112657 2024-04-27 07:49:51 +0900 Paper 2023 6 Tomotaka Hatakeyama, Kota Sawada, Masaru Suzuki, Makoto Watanabe Additive Manufacturing 61 103350 https://doi.org/10.1016/j.addma.2022.103350 2024-04-27 07:49:51 +0900 Paper 2022 1 澤田 浩太, 畠山 友孝, 関戸 薫子, 木村 一弘 炭素鋼の長時間クリープによる黒鉛化に関する研究 ボイラ研究 431 18 23 2024-04-27 07:49:51 +0900 Paper 2022 2 Kota Sawada, Yasushi Taniuchi, Kaoru Sekido, Takehiro Nojima, Kazuhiro Kimura Science and Technology of Advanced Materials: Methods 2 1 198 212 https://doi.org/10.1080/27660400.2022.2080484 2024-04-27 07:49:51 +0900 Paper 2022 3 澤田 浩太, 谷内 泰志, 関戸 薫子, 野島 健大, 木村 一弘 低合金鋼の10万時間クリープ破断強度評価 鉄と鋼 108 9 679 685 https://doi.org/10.2355/tetsutohagane.tetsu-2022-048 2024-04-27 07:49:51 +0900 Paper 2022 4 K. Kimura, K. Sawada Materials at High Temperatures 39 6 538 548 https://doi.org/10.1080/09603409.2022.2058230 2024-04-27 07:49:51 +0900 Paper 2022 5 Kota Sawada, Kazuhiro Kimura Materials at High Temperatures 39 6 566 571 https://doi.org/10.1080/09603409.2022.2058233 2024-04-27 07:49:51 +0900 Paper 2022 6 Kazuhiro Kimura, Kota Sawada Creep Deformation Property and Creep Life Evaluation of Super304H Journal of Pressure Vessel Technology 144 2 https://doi.org/10.1115/1.4052397 2024-04-27 07:49:51 +0900 Paper 2022 7 Tomotaka Hatakeyama, Kota Sawada, Kaoru Sekido, Toru Hara, Kazuhiro Kimura Microstructural factors of the complex creep rate change in 18Cr–9Ni–3Cu–Nb–N steel Materials Science and Engineering: A 831 142225 https://doi.org/10.1016/j.msea.2021.142225 2024-04-27 07:49:51 +0900 Paper 2021 1 Tomotaka Hatakeyama, Kota Sawada, Kaoru Sekido, Toru Hara, Kazuhiro Kimura Graphitization Behaviors of Creep-ruptured 0.3% Carbon Steel at 673 to 773 K ISIJ International 61 3 993 1001 https://doi.org/10.2355/isijinternational.isijint-2020-575 2024-04-27 07:49:51 +0900 Paper 2021 2 井上 忠信, 上路 林太郎, 川島 義也, 藤﨑 百合恵, 澤田 浩太, 木村 一弘 物質・材料研究機構での研究トピックスと企業連携 ぷらすとす 745 750 https://doi.org/10.32277/plastos.4.47_745 2024-04-27 07:49:51 +0900 Paper 2021 3 Tomotaka Hatakeyama, Kota Sawada, Kaoru Sekido, Toru Hara, Kazuhiro Kimura TTP Diagrams of Graphitization of Creep Ruptured Carbon Steels and 0.5Mo Steel ISIJ International 61 11 2822 2831 https://doi.org/10.2355/isijinternational.isijint-2021-275 2024-04-27 07:49:51 +0900 Paper 2021 4 Kota Sawada, Tomotaka Hatakeyama, Kaoru Sekido, Kazuhiro Kimura Microstructural changes and creep-strength degradation in 18Cr-9Ni-3Cu-Nb-N steel Materials Characterization 178 111286 https://doi.org/10.1016/j.matchar.2021.111286 2024-04-27 07:49:51 +0900 Paper 2021 5 Tomotaka Hatakeyama, Kota Sawada, Toru Hara, Kaoru Sekido, Kazuhiro Kimura Three-dimensional analysis of the precipitation behavior of 18Cr–9Ni–3Cu–Nb–N steel at 973 K Scripta Materialia 200 113904 https://doi.org/10.1016/j.scriptamat.2021.113904 2024-04-27 07:49:51 +0900 Paper 2021 6 Tomotaka Hatakeyama, Kota Sawada, Kaoru Sekido, Toru Hara, Kazuhiro Kimura Influence of dynamic microstructural changes on the complex creep deformation behavior of 25Cr–20Ni–Nb–N steel at 873 K Materials Science and Engineering: A 814 141270 https://doi.org/10.1016/j.msea.2021.141270 2024-04-27 07:49:51 +0900 Paper 2021 7 Akihiro Endo, Kota Sawada, Kenji Nagata, Hideki Yoshikawa, Hayaru Shouno Science and Technology of Advanced Materials: Methods 1 1 225 233 https://doi.org/10.1080/27660400.2021.1997556 2024-04-27 07:49:51 +0900 Paper 2020 1 Kota Sawada, Kaoru Sekido, Kazuhiro Kimura, Ko Arisue, Masaki Honda, Nobuyoshi Komai, Norihide Fukuzawa, Tomonori Ueno, Nobuaki Shimohata, Hitoshi Nakatomi, Kenji Takagi, Takahiro Kimura, Kyohei Nomura, Keiji Kubushiro Effect of Initial Microstructure on Creep Strength of ASME Grade T91 Steel ISIJ International 60 2 382 391 https://doi.org/10.2355/isijinternational.isijint-2019-358 2024-04-27 07:49:51 +0900 Paper 2020 2 澤田 浩太 NIMSクリープデータシートと世界記録 火力原子力発電 399 400 2024-04-27 07:49:51 +0900 Paper 2020 3 K. Sawada, K. Sekido, K. Kimura Segregation and its effect on creep rupture strength in Grade 92 steels Materials Characterization 169 110581 https://doi.org/10.1016/j.matchar.2020.110581 2024-04-27 07:49:51 +0900 Paper 2020 4 M. Braun, K. Sawada, K. Kimura Microstructural changes around grain boundary after long-term creep in low-alloy steels International Journal of Pressure Vessels and Piping 186 104162 https://doi.org/10.1016/j.ijpvp.2020.104162 2024-04-27 07:49:51 +0900 Paper 2019 1 澤田 浩太, 関戸 薫子, 木村 一弘, 有末 紘, 本田 雅幹, 駒井 伸好, 福澤 範英, 上野 友典, 下畠 伸朗, 中富 仁, 髙木 建二, 木村 尭弘, 野村 恭兵, 久布白 圭司 ASME Grade T91鋼のクリープ強度に及ぼす初期組織の影響 鉄と鋼 105 4 433 442 https://doi.org/10.2355/tetsutohagane.tetsu-2018-066 2024-04-27 07:49:51 +0900 Paper 2019 2 澤田 浩太, 木村 一弘 高クロム鋼の長時間クリープ強度の安定性と組織 ふぇらむ 2 68 72 2024-04-27 07:49:51 +0900 Paper 2019 3 Kota Sawada, Kazuhiro Kimura, Fujio Abe, Yasushi Taniuchi, Kaoru Sekido, Takehiro Nojima, Toshio Ohba, Hideaki Kushima, Hideko Miyazaki, Hiromichi Hongo, Takashi Watanabe Catalog of NIMS creep data sheets Science and Technology of Advanced Materials 20 1 1131 1149 https://doi.org/10.1080/14686996.2019.1697616 2024-04-27 07:49:51 +0900 Paper 2018 1 K. Sawada, K. Sekido, M. Murata, K. Kamihira, K. Kimura Precipitation behavior during aging and creep in 18Cr–9Ni–3Cu–Nb–N steel Materials Characterization 141 279 285 https://doi.org/10.1016/j.matchar.2018.04.055 2024-04-27 07:49:51 +0900 Paper 2017 1 澤田 浩太 耐熱鋼の超長時間クリープ特性 日本ばね学会会報 9 552 4897 4898 2024-04-27 07:49:51 +0900 Paper 2017 2 澤田 浩太, 古谷 佳之, 片山 英樹 表面・界面の長時間挙動解析に基づく長期信頼性評価 金属 87 1 30 36 2024-04-27 07:49:51 +0900 Paper 2016 1 M. Shibuya, Y. Toda, K. Sawada, H. Kushima, K. Kimura 923〜1023Kにおける15Crフェライト耐熱鋼の高温クリープ強度向上 Materials Science and Engineering: A 652 1 6 https://doi.org/10.1016/j.msea.2015.11.068 2024-04-27 07:49:51 +0900 Paper 2015 1 Yuan Liu, Susumu Tsukamoto, Kota Sawada, Masaaki Tabuchi, Fujio Abe Precipitation behaviour in Ac3 HAZ simulated B steel during PWHT and creep deformation Metallurgical and Materials Transactions A 46 5 1843 1854 https://doi.org/10.1007/s11661-015-2802-y 2024-04-27 07:49:51 +0900 Paper 2015 2 K. Sawada, T. Hara, M. Tabuchi, K. Kimura, K. Kubushiro Microstructure characterization of heat affected zone after welding in Mod.9Cr-1Mo steel Materials Characterization 101 106 113 https://doi.org/10.1016/j.matchar.2015.01.013 2024-04-27 07:49:51 +0900 Paper 2015 3 澤田 浩太, 大場 敏夫, 木村 一弘 耐熱鋼の長時間クリープ試験と材質劣化 材料試験技術 60 1 12 17 2024-04-27 07:49:51 +0900 Paper 2014 1 大谷俊博, 田淵 正明, 澤田 浩太, 本郷 宏通 非線形超音波法を用いたボイラー用耐熱鋼のクリープ損傷評価の研究 ボイラ研究 388 "" 25 30 2024-04-27 07:49:51 +0900 Paper 2014 2 Xinbao Liu, Mitsuharu Shiwa, Kota Sawada 材料組織が異なる9%Cr耐熱鋼の動的応答の予荷重効果 Materials Science and Engineering: A 606 390 395 https://doi.org/10.1016/j.msea.2014.03.102 2024-04-27 07:49:51 +0900 Paper 2014 3 Yuan Liu, Susumu Tsukamoto, Kota Sawada, Fujio Abe Role of Boundary Strengthening on Prevention of Type IV Failure in High Cr Ferritic Heat-Resistant Steels Metallurgical and Materials Transactions A 45 3 1306 1314 https://doi.org/10.1007/s11661-013-2072-5 2024-04-27 07:49:51 +0900 Paper 2014 4 K. Sawada, H. Kushima, T. Hara, M. Tabuchi, K. Kimura Heat-to-heat variation of creep strength and long-term stability of microstructure in Grade 91 steels Materials Science and Engineering: A 597 164 170 https://doi.org/10.1016/j.msea.2013.12.088 2024-04-27 07:49:51 +0900 Paper 2014 5 Thuy Dang Nguyen, Kota Sawada, Hideaki Kushima, Masaaki Tabuchi, Kazuhiro Kimura Change of precipitate free zone during long-term creep in 2.25Cr–1Mo steel Materials Science and Engineering: A 591 130 135 https://doi.org/10.1016/j.msea.2013.10.101 2024-04-27 07:49:51 +0900 Paper 2014 6 Satoru Kobayashi, Kota Sawada, Toru Hara, Hideaki Kushima, Kazuhiro Kimura ASME Grade 91鋼板におけるδフェライト相の形成と溶解 Materials Science and Engineering: A 592 241 248 https://doi.org/10.1016/j.msea.2013.10.058 2024-04-27 07:49:51 +0900 Paper 2014 7 M. Shibuya, Y. Toda, K. Sawada, H. Kushima, K. Kimura 923から1023Kの高温における15%Crフェライト鋼のクリープ強度に及ぼす析出挙動の影響 Materials Science and Engineering: A 592 1 5 https://doi.org/10.1016/j.msea.2013.10.085 2024-04-27 07:49:51 +0900 Paper 2014 8 K. Sawada, H. Kushima, M. Tabuchi, K. Kimura Effect of creep deformation on Z phase formation in Gr.91 steel Materials Science and Technology 30 1 12 16 https://doi.org/10.1179/1743284713y.0000000309 2024-04-27 07:49:51 +0900 Paper 2013 1 K. Kimura, K. Sawada, H. Kushima, Y. Toda Influence of Chemical Composition and Heat Treatment on Long-term Creep Strength of Grade 91 Steel Procedia Engineering 55 2 9 https://doi.org/10.1016/j.proeng.2013.03.211 2024-04-27 07:49:51 +0900 Paper 2012 1 Masaaki Tabuchi, Hiromichi Hongo, Takashi Watanabe, Kota Sawada Gr.122鋼の溶接継手におけるType-IVクリープ損傷に及ぼす開先形状の効果 Materials at High Temperatures 29 4 293 300 https://doi.org/10.3184/096034012x13481602910163 2024-04-27 07:49:51 +0900 Paper 2012 2 Kazuhiro Kimura, Kota Sawada, Hideaki Kushima Journal of Pressure Vessel Technology 134 3 031403 https://doi.org/10.1115/1.4005876 2024-04-27 07:49:51 +0900 Paper 2011 1 K. Sawada, H. Kushima, M. Tabuchi, K. Kimura Microstructural degradation of Gr.91 steel during creep under low stress Materials Science and Engineering: A 528 16-17 5511 5518 https://doi.org/10.1016/j.msea.2011.03.073 2024-04-27 07:49:51 +0900 Paper 2011 2 M. Shibuya, Y. Toda, K. Sawada, H. Kushima, K. Kimura 15Crフェライト鋼の析出強度におけるNiとCo添加の影響 Materials Science and Engineering: A 528 16-17 5387 5393 https://doi.org/10.1016/j.msea.2011.03.088 2024-04-27 07:49:51 +0900 Paper 2010 1 Xinbao Liu, Kota Sawada, Hisashi Yamawaki, Makoto Watanabe, Fuxing Yin, Mitsuharu Shiwa 2.25Cr-1Mo鋼の内部摩擦特性評価 日本金属学会誌 74 4 227 230 https://doi.org/10.2320/jinstmet.74.227 2024-04-27 07:49:51 +0900 Paper 2010 2 K. Sawada, H. Hongo, T. Watanabe, M. Tabuchi Analysis of the microstructure near the crack tip of ASME Gr.92 steel after creep crack growth Materials Characterization 61 11 1097 1102 https://doi.org/10.1016/j.matchar.2010.07.003 2024-04-27 07:49:51 +0900 Paper 2010 3 駒崎 慎一, 本田 哲也, 坂村 喬史, 澤田 浩太, 木村 一弘, 幸野 豊 改良9Cr-1Mo鋼のクリープに伴う水素放出特性の変化 鉄と鋼 96 10 614 619 https://doi.org/10.2355/tetsutohagane.96.614 2024-04-27 07:49:51 +0900 Paper 2010 4 Xinbao Liu, Mitsuharu Shiwa, Kota Sawada, Hisashi Yamawaki, Makoto Watanabe, Fuxing Yin Effect of cold working deformation on the internal friction of 2.25Cr–1Mo steel Materials Science and Engineering: A 527 24-25 6741 6744 https://doi.org/10.1016/j.msea.2010.07.015 2024-04-27 07:49:51 +0900 Paper 2010 5 K. Kimura, Y. Toda, H. Kushima, K. Sawada Creep strength of high chromium steel with ferrite matrix International Journal of Pressure Vessels and Piping 87 6 282 288 https://doi.org/10.1016/j.ijpvp.2010.03.016 2024-04-27 07:49:51 +0900 Paper 2010 6 Xinbao Liu, Mitsuharu Shiwa, Kota Sawada, Hisashi Yamawaki, Makoto Watanabe 内部摩擦に伴う2.25Cr-1Mo鋼の熱拡散係数測定 Materials Letters 64 11 1247 1250 https://doi.org/10.1016/j.matlet.2010.03.001 2024-04-27 07:49:51 +0900 Paper 2010 7 Kazuhiro Kimura, Kota Sawada, Hideaki Kushima Transactions of the Indian Institute of Metals 63 2-3 123 129 https://doi.org/10.1007/s12666-010-0017-x 2024-04-27 07:49:51 +0900 Paper 2010 8 K. Sawada, M. Bauer, F. Kauffmann, P. Mayr, A. Klenk Microstructural change of 9% Cr-welded joints after long-term creep Materials Science and Engineering: A 527 6 1417 1426 https://doi.org/10.1016/j.msea.2009.10.044 2024-04-27 07:49:51 +0900 Paper 2009 1 K Kimura, K Sawada, H Kushima, Y Toda Microstructural stability and long term creep strength of grade 91 steel Energy Materials 4 4 176 183 https://doi.org/10.1179/174892312x13269692038897 2024-04-27 07:49:51 +0900 Paper 2009 2 Kota Sawada, Masakazu Fujitsuka, Masaaki Tabuchi, Kazuhiro Kimura Effect of oxidation on the creep rupture life of ASME T23 steel International Journal of Pressure Vessels and Piping 86 10 693 698 https://doi.org/10.1016/j.ijpvp.2009.03.001 2024-04-27 07:49:51 +0900 Paper 2009 3 Xinbao Liu, Kota Sawada, Hisashi Yamawaki, Makoto Watanabe, Fuxing Yin, Mitsuharu Shiwa 2.25Cr-1Mo鋼の内部摩擦特性の評価 MATERIALS TRANSACTIONS 50 9 2143 2146 https://doi.org/10.2320/matertrans.maw200909 2024-04-27 07:49:51 +0900 Paper 2009 4 K. Sawada, M. Tabuchi, K. Kimura Creep strength degradation of ASME P23/T23 steels Materials Science and Engineering: A 513-514 128 137 https://doi.org/10.1016/j.msea.2009.02.027 2024-04-27 07:49:51 +0900 Paper 2009 5 SAWADA, Kota, TABUCHI, Masaaki, KIMURA, Kazuhiro Analysis of long-term creep curve by constitutive equations MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 190 194 2024-04-27 07:49:51 +0900 Paper 2009 6 KIMURA, Kazuhiro, KUSHIMA, Hideaki, SAWADA, Kota Long-term creep deformation property of Modified 9Cr-1Mo steel MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 58 63 2024-04-27 07:49:51 +0900 Paper 2009 7 澤田 浩太 先進耐熱鋼の長時間クリープに伴う材質劣化 配管技術 51 5 1 5 2024-04-27 07:49:51 +0900 Paper 2008 1 K. Sawada, T. Ohmura, T. Ohba, K. Tsuzaki, F. Abe, K. Kimura, I. Nonaka Elastic properties of heat resistant steels after long-term creep exposure Materials at High Temperatures 25 3 179 185 https://doi.org/10.3184/096034008x357276 2024-04-27 07:49:51 +0900 Paper 2008 2 Masataka Yoshino, Yoshinao Mishima, Yoshiaki Toda, Hideaki Kushima, Kota Sawada, Kazuhiro Kimura Influence of normalizing heat treatment on precipitation behaviour in modified 9Cr–1Mo steel Materials at High Temperatures 25 3 149 158 https://doi.org/10.3184/096034008x356349 2024-04-27 07:49:51 +0900 Paper 2008 3 K. Sawada, M. Tabuchi, H. Hongo, T. Watanabe, K. Kimura Z-Phase formation in welded joints of high chromium ferritic steels after long-term creep Materials Characterization 59 9 1161 1167 https://doi.org/10.1016/j.matchar.2007.09.009 2024-04-27 07:49:51 +0900 Paper 2008 4 澤田 浩太 先進発電プラント用耐熱鋼の長時間クリープに伴う組織変化と材質劣化 HIHAKAI KENSA 57 9 424 428 2024-04-27 07:49:51 +0900 Paper 2008 5 T. Ohmura, K. Sawada, K. Kimura, K. Tsuzaki Alteration in nanohardness of matrix phase associated with precipitation during long-term aging of type 316 stainless steel Materials Science and Engineering: A 489 1-2 85 92 https://doi.org/10.1016/j.msea.2007.12.003 2024-04-27 07:49:51 +0900 Paper 2008 6 K. Sawada, K. Suzuki, H. Kushima, M. Tabuchi, K. Kimura Effect of Tempering Temperature on Z-Phase Formation and Creep Strength in 9Cr-1Mo-V-Nb-N Steel Materials Science and Engineering: A 480 1-2 558 563 https://doi.org/10.1016/j.msea.2007.09.031 2024-04-27 07:49:51 +0900 Paper 2008 7 Kazuhiro Kimura, Kota Sawada, Hideaki Kushima, Kiyoshi Kubo Effect of stress on creep deformation property of ASME Grade P92/T92 steels International Journal of Materials Research 99 4 395 401 https://doi.org/10.3139/146.101651 2024-04-27 07:49:51 +0900 Paper 2007 1 Kota Sawada, Hideaki Kushima, Kazuhiro Kimura, Masaaki Tabuchi TTP diagrams of Z phase in 9-12%Cr heat resistant steels ISIJ International 47 5 733 739 https://doi.org/10.2355/isijinternational.47.733 2024-04-27 07:49:51 +0900 Paper 2007 2 澤田 浩太 高Crフェライト鋼におけるクリープ中の析出相変化 JOURNAL OF THE JAPAN SOCIETY FOR HEAT TREATMENT 47 3 114 121 2024-04-27 07:49:51 +0900 Paper 2007 3 F. Abe, M. Taneike, K. Sawada Alloy design of creep resistant 9Cr steel using a dispersion of nano-sized carbonitrides International Journal of Pressure Vessels and Piping 84 1-2 3 12 https://doi.org/10.1016/j.ijpvp.2006.09.003 2024-04-27 07:49:51 +0900 Paper 2006 1 KIMURA, Kazuhiro, SAWADA, Kota, TODA, Yoshiaki, KUSHIMA, Hideaki MATERIALS SCIENCE FORUM 3112 3117 2024-04-27 07:49:51 +0900 Paper 2006 2 YOSHINO, Masataka, MISHIMA Yoshinao, TODA, Yoshiaki, KUSHIMA, Hideaki, SAWADA, Kota, KIMURA, Kazuhiro MATERIALS SCIENCE FORUM 2976 2981 2024-04-27 07:49:51 +0900 Paper 2006 3 Kota Sawada, Hideaki Kushima, Kazuhiro Kimura ISIJ International 46 5 769 775 https://doi.org/10.2355/isijinternational.46.769 2024-04-27 07:49:51 +0900 Paper 2006 4 T. Ohmura, K. Tsuzaki, K. Sawada, K. Kimura Journal of Materials Research 21 05 1229 1236 https://doi.org/10.1557/jmr.2006.0143 2024-04-27 07:49:51 +0900 Paper 2005 1 Kota SAWADA, Kensuke MIYAHARA, Hideaki KUSHIMA, Kazuhiro KIMURA, Saburo MATSUOKA ISIJ International 45 12 1934 1939 https://doi.org/10.2355/isijinternational.45.1934 2024-04-27 07:49:51 +0900 Paper 2005 2 Masataka YOSHINO, Yoshinao MISHIMA, Yoshiaki TODA, Hideaki KUSHIMA, Kota SAWADA, Kazuhiro KIMURA ISIJ International 45 1 107 115 https://doi.org/10.2355/isijinternational.45.107 2024-04-27 07:49:51 +0900 Paper 2005 3 K. Sawada, T. Ohba, H. Kushima, K. Kimura Materials Science and Engineering: A 394 1-2 36 42 https://doi.org/10.1016/j.msea.2004.10.041 2024-04-27 07:49:51 +0900 Paper 2005 4 SHAJU, ALBERT, KONDO, MASAYUKI, TABUCHI, Masaaki, YIN, Fuxing, SAWADA, Kota, ABE, Fujio METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 36A "" 333 343 2024-04-27 07:49:51 +0900 Paper 2004 1 澤田 浩太, 久保 清, 木村 一弘 高Crフェライト鋼の高温での擬弾性挙動解析に基づく組織因子の評価 鉄と鋼 90 10 835 840 https://doi.org/10.2355/tetsutohagane1955.90.10_835 2024-04-27 07:49:51 +0900 Paper 2004 2 Y. Kimura, M. Tanaka, R. Kato ISIJ International 44 7 1276 1278 https://doi.org/10.2355/isijinternational.44.1243 2024-04-27 07:49:51 +0900 Paper 2004 3 SAWADA, Kota, ABE, Fujio, KIMURA, Kazuhiro 高Crフェライト鋼の応力瞬間負荷に伴う変形挙動 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 683 686 2024-04-27 07:49:51 +0900 Paper 2004 4 ABE, Fujio, 堀内寿晃, TANEIKE, Masaki, SAWADA, Kota 先進9Cr鋼の高温クリープ中のマルテンサイト組織安定性 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 299 303 2024-04-27 07:49:51 +0900 Paper 2004 5 Masaki Taneike, Kota Sawada, Fujio Abe Metallurgical and Materials Transactions A 35 4 1255 1262 https://doi.org/10.1007/s11661-004-0299-x 2024-04-27 07:49:51 +0900