publication_type publication_year number author title journal_title volume_number issue_number start_page end_page doi reported_at Paper 2024 1 Kazuho Okada, Akinobu Shibata, Yuuji Kimura, Masatake Yamaguchi, Ken-ichi Ebihara, Nobuhiro Tsuji Acta Materialia 280 120288 14 https://doi.org/10.1016/j.actamat.2024.120288 2024-12-04 18:40:36 +0900 Paper 2024 2 Rintaro Ueji, Wu Gong, Stefanus Harjo, Takuro Kawasaki, Akinobu Shibata, Yuuji Kimura, Tadanobu Inoue, Noriyuki Tsuchida ISIJ International 64 2 459 465 https://doi.org/10.2355/isijinternational.isijint-2023-253 2024-12-04 18:40:36 +0900 Paper 2024 3 森山 仁志, 木村 勇次, 山口 隆司, 津﨑 兼彰, 増田 浩志, 長崎 英二, 秦 子策 1700MPa 級超高力ボルトの量産試作およびそれを用いた 摩擦接合継手のすべり耐力 鋼構造論文集 30 120 120_115 120_127 https://doi.org/10.11273/jssc.30.120_115 2024-12-04 18:40:36 +0900 Paper 2022 1 Yuuji Kimura, Taku Moronaga, Tadanobu Inoue Mo添加中炭素鋼の遅れ破壊特性に及ぼす加工熱処理の影響 ISIJ International 62 2 377 388 https://doi.org/10.2355/isijinternational.isijint-2021-407 2024-12-04 18:40:36 +0900 Paper 2022 2 Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue Preferable Resistance against Hydrogen Embrittlement of Pearlitic Steel Deformed by Caliber Rolling ISIJ International 62 2 368 376 https://doi.org/10.2355/isijinternational.isijint-2021-429 2024-12-04 18:40:36 +0900 Paper 2022 3 Ilya Nikulin, Takahiro Sawaguchi, Fumiyoshi Yoshinaka, Susumu Takamori, Yuuji Kimura Influence of Annealing Microstructure on the Low-cycle Fatigue Properties and Fatigue Microstructure of a Fe–15Mn–10Cr–8Ni–4Si Seismic Damping Alloy ISIJ International 62 2 389 398 https://doi.org/10.2355/isijinternational.isijint-2021-211 2024-12-04 18:40:36 +0900 Paper 2022 4 Yuuji Kimura, Tadanobu Inoue Influence of Annealing on Delamination Toughening of Mo-Bearing Medium-Carbon Steel with Ultrafine Elongated Grain Structure Processed by Warm Tempforming ISIJ International 62 2 402 404 https://doi.org/10.2355/isijinternational.isijint-2021-068 2024-12-04 18:40:36 +0900 Paper 2022 5 Akinobu Shibata, Yasunari Takeda, Yuuji Kimura, Nobuhiro Tsuji Hydrogen-Related Fracture Behavior under Constant Loading Tensile Test in As-Quenched Low-Carbon Martensitic Steel Metals 12 3 440 https://doi.org/10.3390/met12030440 2024-12-04 18:40:36 +0900 Paper 2022 6 Tadanobu Inoue, Yuuji Kimura Effect of Delamination and Grain Refinement on Fracture Energy of Ultrafine-Grained Steel Determined Using an Instrumented Charpy Impact Test Materials 15 3 867 https://doi.org/10.3390/ma15030867 2024-12-04 18:40:36 +0900 Paper 2021 1 Rintaro Ueji, Yuuji Kimura, Kohsaku Ushioda, Takahito Ohmura, Tadanobu Inoue 異なる旧オーステナイト粒径を有する残留オーステナイトを含有するベイナイト組織から構成される0.6％Ｃ中炭素鋼の優れた強度延性バランス ISIJ International 61 2 582 590 https://doi.org/10.2355/isijinternational.isijint-2020-389 2024-12-04 18:40:36 +0900 Paper 2021 2 遠藤 一輝, 井 誠一郎, 木村 勇次, 佐々木 泰祐, 後藤 聡太, 横田 毅, 大村 孝仁 Interstitial Free鋼の粒界近傍における局所力学特性に及ぼす幾何学因子およびB添加の影響 日本金属学会誌 85 1 30 39 https://doi.org/10.2320/jinstmet.jd202005 2024-12-04 18:40:36 +0900 Paper 2021 3 Kazuki Endoh, Seiichiro Ii, Yuuji Kimura, Taisuke Sasaki, Sota Goto, Takeshi Yokota, Takahito Ohmura Effects of Grain Boundary Geometry and Boron Addition on the Local Mechanical Behavior of Interstitial-Free (IF) Steels MATERIALS TRANSACTIONS 62 10 1479 1488 https://doi.org/10.2320/matertrans.mt-m2021128 2024-12-04 18:40:36 +0900 Paper 2021 4 Hai Qiu, Rintaro Ueji, Tadanobu Inoue, Yuuji Kimura Plastic Instability in Medium-Carbon Tempered Martensite Steel Materials 14 16 4609 https://doi.org/10.3390/ma14164609 2024-12-04 18:40:36 +0900 Paper 2021 5 Yuuji Kimura, Tadanobu Inoue, Toshio Otani, Akihiro Ochiai, Shohei Ikurumi, Tomohiro Takatsuji Upsizing high-strength fail-safe steel through warm tempforming Materials Science and Engineering: A 819 141514 https://doi.org/10.1016/j.msea.2021.141514 2024-12-04 18:40:36 +0900 Paper 2021 6 Hai Qiu, Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue Grain-to-Grain Interaction Effect in Polycrystalline Plain Low-Carbon Steel within Elastic Deformation Region Materials 14 8 1865 https://doi.org/10.3390/ma14081865 2024-12-04 18:40:36 +0900 Paper 2021 7 Tadanobu Inoue, Hai Qiu, Rintaro Ueji, Yuuji Kimura Ductile-to-Brittle Transition and Brittle Fracture Stress of Ultrafine-Grained Low-Carbon Steel Materials 14 7 1634 https://doi.org/10.3390/ma14071634 2024-12-04 18:40:36 +0900 Paper 2021 8 Rintaro Ueji, Akinobu Shibata, Kohsaku Ushioda, Yuuji Kimura, Takahito Ohmura, Tadanobu Inoue Crystallographic orientation dependence of deformation-induced martensitic transformation of 1.3 GPa-class 0.6 %C bainitic steel with retained austenite Scripta Materialia 194 113666 https://doi.org/10.1016/j.scriptamat.2020.113666 2024-12-04 18:40:36 +0900 Paper 2021 9 R Ueji, Y Kimura, K Ushioda, T Ohmura, T Inoue, A Shibata Orientation dependence of transformation induced plasticity in high carbon bainitic steel IOP Conference Series: Materials Science and Engineering 012022-1 012022-6 https://doi.org/10.1088/1757-899x/1121/1/012022 2024-12-04 18:40:36 +0900 Paper 2020 1 Yuuji Kimura, Tadanobu Inoue Mechanical Property of Ultrafine Elongated Grain Structure Steel Processed by Warm Tempforming and Its Application to Ultra-High-Strength Bolt ISIJ International 60 6 1108 1126 https://doi.org/10.2355/isijinternational.isijint-2019-726 2024-12-04 18:40:36 +0900 Paper 2020 2 木村 勇次, 増田浩志, 山口隆司, 長崎英二, 森山仁志, 津﨑兼彰 1700 MPa級超高力ボルトの力学性能に及ぼすボルト形状寸法の影響 鋼構造論文集 27 107 41 50 2024-12-04 18:40:36 +0900 Paper 2020 3 Hai Qiu, Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue Heterogeneous Distribution of Microstrain Evolved During Tensile Deformation of Polycrystalline Plain Low Carbon Steel Metals 10 6 774 https://doi.org/10.3390/met10060774 2024-12-04 18:40:36 +0900 Paper 2019 1 木村 勇次 結晶粒超微細化による鉄鋼材料の強靭化 熱処理 1 10 17 2024-12-04 18:40:36 +0900 Paper 2019 2 木村 勇次, 井上 忠信 温間テンプフォーミングで作製した超微細繊維状結晶粒組織鋼の力学特性と超高強度ボルトへの応用 鉄と鋼 105 2 127 145 https://doi.org/10.2355/tetsutohagane.tetsu-2018-077 2024-12-04 18:40:36 +0900 Paper 2019 3 木村 勇次, 井上 忠信 2000 MPa級超高強度ボルトの開発 橋梁と基礎 109 112 2024-12-04 18:40:36 +0900 Paper 2019 4 Tadanobu Inoue, Rintaro Ueji, Yuuji Kimura Improvement of toughness and strength balance in low-carbon steel bars with cube texture processed by warm bi-axial rolling Materials Letters 240 172 175 https://doi.org/10.1016/j.matlet.2019.01.007 2024-12-04 18:40:36 +0900 Paper 2018 1 井上 忠信, 上路 林太郎, 木村 勇次 炭素鋼の強靭延性化の方向性 日本機械学会論文集 84 866 18 00237 https://doi.org/10.1299/transjsme.18-00237 2024-12-04 18:40:36 +0900 Paper 2018 2 木村 勇次, 井上 忠信, 中田 隆之, 福田 又一 1.8GPa級超高強度フェールセーフボルトの耐遅れ破壊特性 日本機械学会論文集 84 860 17 00493 https://doi.org/10.1299/transjsme.17-00493 2024-12-04 18:40:36 +0900 Paper 2017 1 木村 勇次 リンを活用した中炭素低合金鋼の強じん化 熱処理 57 6 325 326 2024-12-04 18:40:36 +0900 Paper 2017 2 Yuuji Kimura, Tadanobu Inoue, Eiji Akiyama Warm tempforming effect on the hydrogen embrittlement of 1.8-GPa-class ultra-high-strength low-alloy steel Materials Science and Engineering: A 703 503 512 https://doi.org/10.1016/j.msea.2017.07.091 2024-12-04 18:40:36 +0900 Paper 2016 1 井上 忠信, 木村 勇次 1800MPa級フェールセーフ鋼の微視き裂発生のクライテリオン（微視組織制御からの破壊制御の構築） 日本機械学会論文集 82 844 16 00246 https://doi.org/10.1299/transjsme.16-00246 2024-12-04 18:40:36 +0900 Paper 2016 2 Yuuji Kimura, Tadanobu Inoue 超高強度鋼の強度と靱性に及ぼすオースフォームと温間テンプフォーミングの複合効果の影響 ISIJ International 56 11 2047 2056 https://doi.org/10.2355/isijinternational.isijint-2016-275 2024-12-04 18:40:36 +0900 Paper 2016 3 Chengduo Wang, Hai Qiu, Yuuji Kimura, Tadanobu Inoue Morphology, crystallography, and crack paths of tempered lath martensite in a medium-carbon low-alloy steel Materials Science and Engineering: A 669 48 57 https://doi.org/10.1016/j.msea.2016.05.041 2024-12-04 18:40:36 +0900 Paper 2016 4 Xiaohua Min, Yuuji Kimura, Takashi Kimura, Kaneaki Tsuzaki 超微細繊維状結晶粒組織を有する中炭素低合金鋼のPによる層状破壊誘発を活用した靱化 Materials Science and Engineering: A 649 135 145 https://doi.org/10.1016/j.msea.2015.09.102 2024-12-04 18:40:36 +0900 Paper 2015 1 井上 忠信, 木村 勇次, 邱 海, 王 成鐸 超微細粒組織を活用した1800MPa級超高強度鋼のき裂伝播挙動（微視組織制御からの破壊制御の構築） 日本機械学会論文集 81 830 15 00281 https://doi.org/10.1299/transjsme.15-00281 2024-12-04 18:40:36 +0900 Paper 2015 2 Yuuji Kimura, Tadanobu Inoue 温間テンプフォームで作製した超微細繊維状結晶粒組織鋼の機械的特性に及ぼす旧オーステナイト粒組織の影響 ISIJ International 55 8 1762 1771 https://doi.org/10.2355/isijinternational.isijint-2015-081 2024-12-04 18:40:36 +0900 Paper 2015 3 Tadanobu INOUE, Yuuji KIMURA, Hai QIU フェールセーフ設計された低合金鋼の強度ー靭性バランス Mechanical Engineering Letters 1 0 15 00358 https://doi.org/10.1299/mel.15-00358 2024-12-04 18:40:36 +0900 Paper 2015 4 Yuuji Kimura, Tadanobu Inoue 超微細繊維状結晶粒組織鋼の強靭化に及ぼす炭素量の影響 ISIJ International 55 5 1135 1144 https://doi.org/10.2355/isijinternational.55.1135 2024-12-04 18:40:36 +0900 Paper 2014 1 山口隆司, 長崎英二, 潘超, 木村 勇次 1,800N/mm2級超高力ボルトに使用するねじ形状の開発および性能確認試験 土木学会論文集A1（構造・地震工学） 70 3 409 417 2024-12-04 18:40:36 +0900 Paper 2014 2 木村 勇次, 井上 忠信 超微細繊維状結晶粒組織鋼の強靭化に及ぼす炭素量の影響 鉄と鋼 100 9 1104 1113 https://doi.org/10.2355/tetsutohagane.100.1104 2024-12-04 18:40:36 +0900 Paper 2014 3 木村 勇次 復刻論文 鉄と鋼 100 9 R22 R23 https://doi.org/10.2355/tetsutohagane.100.r22 2024-12-04 18:40:36 +0900 Paper 2013 1 Meysam Jafari, Yuuji Kimura, Kaneaki Tsuzaki 超微細繊維状結晶粒組織を有する高強度鋼のP添加による靱化 Philosophical Magazine Letters 93 2 109 115 https://doi.org/10.1080/09500839.2012.750766 2024-12-04 18:40:36 +0900 Paper 2013 2 Yuuji Kimura, Tadanobu Inoue, Kaneaki Tsuzaki Tempforming in medium-carbon low-alloy steel Journal of Alloys and Compounds 577 S538 S542 https://doi.org/10.1016/j.jallcom.2011.12.123 2024-12-04 18:40:36 +0900 Paper 2013 3 井上 忠信, 木村 勇次 超微細粒組織を活用した低炭素鋼の強靭化 日本機械学会論文集Ａ編 79 804 1226 1238 https://doi.org/10.1299/kikaia.79.1226 2024-12-04 18:40:36 +0900 Paper 2013 4 Tadanobu Inoue, Yuuji Kimura Effect of initial notch orientation on fracture toughness in fail-safe steel Journal of Materials Science 48 13 4766 4772 https://doi.org/10.1007/s10853-012-6874-4 2024-12-04 18:40:36 +0900 Paper 2013 5 Eiji Akiyama, Maoqiu Wang, Songjie Li, Zuogui Zhang, Yuuji Kimura, Nobuyoshi Uno, Kaneaki Tsuzaki Studies of Evaluation of Hydrogen Embrittlement Property of High-Strength Steels with Consideration of the Effect of Atmospheric Corrosion Metallurgical and Materials Transactions A 44 3 1290 1300 https://doi.org/10.1007/s11661-012-1403-2 2024-12-04 18:40:36 +0900 Paper 2013 6 木村 勇次 ボルトの超高強度化の期待と課題 JSSCテクニカルレポート 96 "" 227 231 2024-12-04 18:40:36 +0900 Paper 2013 7 Yuuji Kimura, Tadanobu Inoue 超高強度中炭素低合金鋼の組織および機械的特性に及ぼす温間テンプフォーミングの影響 Metallurgical and Materials Transactions A 44 1 560 576 https://doi.org/10.1007/s11661-012-1391-2 2024-12-04 18:40:36 +0900 Paper 2012 1 木村 勇次, 井上 忠信 超微細繊維状結晶粒組織を有するフェールセーフ鋼の強靭化 ふぇらむ 17 12 829 835 2024-12-04 18:40:36 +0900 Paper 2012 2 木村 勇次, 井上 忠信 中炭素低合金鋼の温間テンプフォーミングで形成した超微細繊維状結晶粒組織 熱処理 52 6 299 300 2024-12-04 18:40:36 +0900 Paper 2012 3 Meysam Jafari, Yuuji Kimura, Kaneaki Tsuzaki 0.05％リン添加高強度鋼のデラミネーションによる上部棚吸収エネルギーの向上 Metallurgical and Materials Transactions A 43 7 2453 2465 https://doi.org/10.1007/s11661-012-1095-7 2024-12-04 18:40:36 +0900 Paper 2012 4 Tadanobu Inoue, Yuuji Kimura, Shojiro Ochiai Shape effect of ultrafine-grained structure on static fracture toughness in low-alloy steel Science and Technology of Advanced Materials 13 3 035005 https://doi.org/10.1088/1468-6996/13/3/035005 2024-12-04 18:40:36 +0900 Paper 2012 5 長島 伸夫, 古谷 佳之, 木村 勇次, 井上 忠信 温間テンプフォーミング処理を施した超微細粒鋼の疲労特性 TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS, SERIES A(日本機械学会論文集 A編) 78 790 154 158 2024-12-04 18:40:36 +0900 Paper 2012 6 Yihong Nie, Yuuji Kimura, Tadanobu Inoue, Fuxing Yin, Eiji Akiyama, Kaneaki Tsuzaki 超微細繊維状結晶粒組織を有する1500MPa級鋼の水素脆化 Metallurgical and Materials Transactions A 43 5 1670 1687 https://doi.org/10.1007/s11661-011-0974-7 2024-12-04 18:40:36 +0900 Paper 2012 7 M. Jafari, Y. Kimura, K. Tsuzaki Enhanced upper shelf energy by ultrafine elongated grain structures in 1100MPa high strength steel Materials Science and Engineering: A 532 420 429 https://doi.org/10.1016/j.msea.2011.11.007 2024-12-04 18:40:36 +0900 Paper 2011 1 Tadanobu Inoue, Yuuji Kimura, Shojiro Ochiai フェールセーフ鋼の静的破壊靭性 Scripta Materialia 65 6 552 555 https://doi.org/10.1016/j.scriptamat.2011.06.025 2024-12-04 18:40:36 +0900 Paper 2010 1 Meysam Jafari, Yuuji Kimura, Yihong Nie, Kaneaki Tsuzaki Enhancement of Impact Toughness of 0.05% P Doped High Strength Steel through Formation of an Ultrafine Elongated Grain Structure ISIJ International 50 11 1660 1665 https://doi.org/10.2355/isijinternational.50.1660 2024-12-04 18:40:36 +0900 Paper 2010 2 Yuuji Kimura, Tadanobu Inoue, Fuxing Yin, Kaneaki Tsuzaki 温間テンプフォーミングで作製された超微細結晶粒組織鋼のデラミネーションタフニング ISIJ International 50 1 152 161 https://doi.org/10.2355/isijinternational.50.152 2024-12-04 18:40:36 +0900 Paper 2010 3 Tadanobu Inoue, Fuxing Yin, Yuuji Kimura, Kaneaki Tsuzaki, Shojiro Ochiai 温間溝ロール圧延で創製された超微細粒低炭素鋼の衝撃特性に関する層状破壊の影響 Metallurgical and Materials Transactions A 41 2 341 355 https://doi.org/10.1007/s11661-009-0093-x 2024-12-04 18:40:36 +0900 Paper 2010 4 Songjie Li, Eiji Akiyama, Kimura Yuuji, Kaneaki Tsuzaki, Nobuyoshi Uno, Boping Zhang Hydrogen embrittlement property of a 1700-MPa-class ultrahigh-strength tempered martensitic steel Science and Technology of Advanced Materials 11 2 025005 https://doi.org/10.1088/1468-6996/11/2/025005 2024-12-04 18:40:36 +0900 Paper 2009 1 木村 勇次 加工熱処理による低合金鋼の強靭化 （社）日本鉄鋼協会会報「ふぇらむ」 14 3 154 161 2024-12-04 18:40:36 +0900 Paper 2008 1 木村 勇次 耐衝撃性に優れた超高強度低合金鋼の開発 型技術 23 10 057 061 2024-12-04 18:40:36 +0900 Paper 2008 2 山口隆司, 増田浩志, 木村 勇次 超鉄鋼高力ボルトを用いた摩擦接合パイロット試験 STEEL CONSTRUCTION ENGINEERING(鋼構造論文集) 15 59 99 107 2024-12-04 18:40:36 +0900 Paper 2008 3 Andrey Belyakov, Kaneaki Tsuzaki, Yuuji Kimura Regularities of Deformation Microstructures in Ferritic Stainless Steels during Large Strain Cold Working ISIJ International 48 8 1071 1079 https://doi.org/10.2355/isijinternational.48.1071 2024-12-04 18:40:36 +0900 Paper 2008 4 Y. Kimura, T. Inoue, F. Yin, K. Tsuzaki 超微細結晶粒組織鋼における靭性の逆温度依存性 Science 320 5879 1057 1060 https://doi.org/10.1126/science.1156084 2024-12-04 18:40:36 +0900 Paper 2007 1 Y. Kimura, T. Inoue, F. Yin, O. Sitdikov, K. Tsuzaki 超微細繊維状組織形成による1500MPa級鋼の靭化 Scripta Materialia 57 6 465 468 https://doi.org/10.1016/j.scriptamat.2007.05.039 2024-12-04 18:40:36 +0900 Paper 2007 2 T. Inoue, F. Yin, Y. Kimura Strain distribution and microstructural evolution in multi-pass warm caliber rolling Materials Science and Engineering: A 466 1-2 114 122 https://doi.org/10.1016/j.msea.2007.02.098 2024-12-04 18:40:36 +0900 Paper 2007 3 Tadanobu Inoue, Fuxing Yin, Yuuji Kimura Crystallographic Texture of Warm Caliber Rolled Low Carbon Steel MATERIALS TRANSACTIONS 48 8 2028 2035 https://doi.org/10.2320/matertrans.ma200703 2024-12-04 18:40:36 +0900 Paper 2007 4 木村 勇次, 秋山 英二, 津﨑 兼彰 超高力ボルトの創製と機械的特性 STEEL CONSTRUCTION ENGINEERING(鋼構造論文集) 14 54 121 127 2024-12-04 18:40:36 +0900 Paper 2007 5 Andrey Belyakov, Kaneaki Tsuzaki, Yuuji Kimura, Yoshisato Kimura, Yoshinao Mishima Comparative Study on Microstructure Evolution upon Unidirectional and Multidirectional Cold Working in an Fe-15%Cr Ferritic Alloy Materials Science and Engineering: A 456 1-2 323 331 https://doi.org/10.1016/j.msea.2006.12.063 2024-12-04 18:40:36 +0900 Paper 2007 6 Oleg, SITDIKOV, Taku Sakai, E. Avtokratova, R. Kaibyshev, KIMURA, Yuuji, TSUZAKI, Kaneaki MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 444 1 18 30 2024-12-04 18:40:36 +0900 Paper 2006 1 広田憲亮, 井上 忠信, 木村 勇次, 東司, 長井 寿 温間溝ロール圧延によって創製されたオーステナイト系ステンレス棒鋼の軟化特性と強度 JOURNAL OF THE JAPAN SOCIETY FOR HEAT TREATMENT 46 4 214 220 2024-12-04 18:40:36 +0900 Paper 2006 2 BELYAKOV, Andrey, KIMURA, Yuuji, TSUZAKI, Kaneaki MATERIALS SCIENCE FORUM 323 328 2024-12-04 18:40:36 +0900 Paper 2006 3 A. Belyakov, Y. Kimura, K. Tsuzaki Acta Materialia 54 9 2521 2532 https://doi.org/10.1016/j.actamat.2006.01.035 2024-12-04 18:40:36 +0900 Paper 2006 4 TSUZAKI, Kaneaki, BELYAKOV, Andrey, KIMURA, Yuuji MATERIALS SCIENCE FORUM 305 310 2024-12-04 18:40:36 +0900 Paper 2005 1 井上 忠信, 殷 福星, 木村 勇次, 長井 寿 溝ロール圧延による超微細組織棒鋼のひずみと組織，硬さ分布 日本金属学会誌 69 11 943 952 https://doi.org/10.2320/jinstmet.69.943 2024-12-04 18:40:36 +0900 Paper 2005 2 A. Belyakov, Y. Kimura, K. Tsuzaki Materials Science and Engineering: A 403 1-2 249 259 https://doi.org/10.1016/j.msea.2005.05.057 2024-12-04 18:40:36 +0900 Paper 2004 1 Andrey Belyakov, Yuuji Kimura, Yoshitaka Adachi, Kaneaki Tsuzaki MATERIALS TRANSACTIONS 45 9 2812 2821 https://doi.org/10.2320/matertrans.45.2812 2024-12-04 18:40:36 +0900 Paper 2004 2 Andrey Belyakov, Yoshikazu Sakai, Toru Hara, Yuuji Kimura, Kaneaki Tsuzaki MATERIALS TRANSACTIONS 45 7 2252 2258 https://doi.org/10.2320/matertrans.45.2252 2024-12-04 18:40:36 +0900 Paper 2004 3 BELYAKOV, Andrey, SAKAI, Yoshikazu, HARA, Toru, KIMURA, Yuuji, TSUZAKI, Kaneaki MATERIALS SCIENCE FORUM 229 234 2024-12-04 18:40:36 +0900