publication_type publication_year number author title journal_title volume_number issue_number start_page end_page doi reported_at Paper 2024 1 Tadanobu Inoue, Shin-ichiro Oka, Takanobu Hiroto Journal of Marine Science and Engineering 12 4 639 https://doi.org/10.3390/jmse12040639 2024-04-26 16:26:43 +0900 Paper 2024 2 Hai Qiu, Rintaro Ueji, Tadanobu Inoue Metals 14 3 306 https://doi.org/10.3390/met14030306 2024-04-26 16:26:43 +0900 Paper 2024 3 Rintaro Ueji, Wu Gong, Stefanus Harjo, Takuro Kawasaki, Akinobu Shibata, Yuuji Kimura, Tadanobu Inoue, Noriyuki Tsuchida ISIJ International 64 2 459 465 https://doi.org/10.2355/isijinternational.isijint-2023-253 2024-04-26 16:26:43 +0900 Paper 2023 1 Tadanobu Inoue, Yuka Hara, Koji Nakazato Materials 16 11 4114 https://doi.org/10.3390/ma16114114 2024-04-26 16:26:43 +0900 Paper 2023 2 Hai Qiu, Tadanobu Inoue Metals 13 3 562 https://doi.org/10.3390/met13030562 2024-04-26 16:26:43 +0900 Paper 2023 3 Hai Qiu, Rintaro Ueji, Tadanobu Inoue Materials 16 1 195 https://doi.org/10.3390/ma16010195 2024-04-26 16:26:43 +0900 Paper 2023 4 Tadanobu Inoue, Yuka Hara, Koji Nakazato Biomimetics 8 8 602 https://doi.org/10.3390/biomimetics8080602 2024-04-26 16:26:43 +0900 Paper 2023 5 Tadanobu Inoue, Takanobu Hiroto, Yuka Hara, Koji Nakazato, Shin-ichiro Oka Journal of Materials Science 58 3 1099 1115 https://doi.org/10.1007/s10853-022-08083-x 2024-04-26 16:26:43 +0900 Paper 2022 1 Yuuji Kimura, Tadanobu Inoue Influence of Annealing on Delamination Toughening of Mo-Bearing Medium-Carbon Steel with Ultrafine Elongated Grain Structure Processed by Warm Tempforming ISIJ International 62 2 402 404 https://doi.org/10.2355/isijinternational.isijint-2021-068 2024-04-26 16:26:43 +0900 Paper 2022 2 Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue Preferable Resistance against Hydrogen Embrittlement of Pearlitic Steel Deformed by Caliber Rolling ISIJ International 62 2 368 376 https://doi.org/10.2355/isijinternational.isijint-2021-429 2024-04-26 16:26:43 +0900 Paper 2022 3 Noriyuki Tsuchida, Rintaro Ueji, Tadanobu Inoue True Stress–True Strain Relationship up to the Plastic Deformation Limit in Ferrite–Pearlite Steel at Various Temperatures ISIJ International 62 2 361 367 https://doi.org/10.2355/isijinternational.isijint-2021-181 2024-04-26 16:26:43 +0900 Paper 2022 4 上路 林太郎, 井上 忠信 日本刀型鋼板に関する研究の構想およびその後の研究 ぷらすとす 5 52 217 220 https://doi.org/10.32277/plastos.5.52_217 2024-04-26 16:26:43 +0900 Paper 2022 5 Tadanobu Inoue, Erina Kitahara, Yuka Hara, Koji Nakazato Minerals 12 12 1607 https://doi.org/10.3390/min12121607 2024-04-26 16:26:43 +0900 Paper 2022 6 Yuuji Kimura, Taku Moronaga, Tadanobu Inoue Mo添加中炭素鋼の遅れ破壊特性に及ぼす加工熱処理の影響 ISIJ International 62 2 377 388 https://doi.org/10.2355/isijinternational.isijint-2021-407 2024-04-26 16:26:43 +0900 Paper 2022 7 Rintaro Ueji, Hidetoshi Somekawa, Tadanobu Inoue, Toru Hara Materials Science and Engineering: A 857 144018 https://doi.org/10.1016/j.msea.2022.144018 2024-04-26 16:26:43 +0900 Paper 2022 8 Tadanobu Inoue, Shin-ichiro Oka, Koji Nakazato, Toru Hara Columnar Structure of Claw Denticles in the Coconut Crab, Birgus latro Minerals 12 2 274 https://doi.org/10.3390/min12020274 2024-04-26 16:26:43 +0900 Paper 2022 9 Tadanobu Inoue, Yuuji Kimura Effect of Delamination and Grain Refinement on Fracture Energy of Ultrafine-Grained Steel Determined Using an Instrumented Charpy Impact Test Materials 15 3 867 https://doi.org/10.3390/ma15030867 2024-04-26 16:26:43 +0900 Paper 2021 1 Shin-ichiro Oka, Koji Tokutake, Tadanobu Inoue Growth analysis and population size estimation of coconut crabs based on a large recapture dataset Crustacean Research 50 0 145 150 https://doi.org/10.18353/crustacea.50.0_145 2024-04-26 16:26:43 +0900 Paper 2021 2 井上 忠信 加工熱処理組織予測の現状と課題 ぷらすとす 1 2 https://doi.org/10.32277/plastos.4.37_1 2024-04-26 16:26:43 +0900 Paper 2021 3 Rintaro Ueji, Yuuji Kimura, Kohsaku Ushioda, Takahito Ohmura, Tadanobu Inoue 異なる旧オーステナイト粒径を有する残留オーステナイトを含有するベイナイト組織から構成される0.6％Ｃ中炭素鋼の優れた強度延性バランス ISIJ International 61 2 582 590 https://doi.org/10.2355/isijinternational.isijint-2020-389 2024-04-26 16:26:43 +0900 Paper 2021 4 Noriyuki Tsuchida, Rintaro Ueji, Tadanobu Inoue Effect of Temperature on Stress–Strain Curve in SUS316L Metastable Austenitic Stainless Steel Studied by <i>In Situ</i> Neutron Diffraction Experiments ISIJ International 61 2 632 640 https://doi.org/10.2355/isijinternational.isijint-2020-547 2024-04-26 16:26:43 +0900 Paper 2021 5 井上 忠信, 上路 林太郎, 川島 義也, 藤﨑 百合恵, 澤田 浩太, 木村 一弘 物質・材料研究機構での研究トピックスと企業連携 ぷらすとす 745 750 https://doi.org/10.32277/plastos.4.47_745 2024-04-26 16:26:43 +0900 Paper 2021 6 Tadanobu Inoue, Shin-ichiro Oka, Koji Nakazato, Toru Hara Structural Changes and Mechanical Resistance of Claws and Denticles in Coconut Crabs of Different Sizes Biology 10 12 1304 https://doi.org/10.3390/biology10121304 2024-04-26 16:26:43 +0900 Paper 2021 7 T. Inoue, T. Hara, K. Nakazato, S. Oka Superior mechanical resistance in the exoskeleton of the coconut crab, Birgus latro Materials Today Bio 12 100132 https://doi.org/10.1016/j.mtbio.2021.100132 2024-04-26 16:26:43 +0900 Paper 2021 8 Hai Qiu, Rintaro Ueji, Tadanobu Inoue, Yuuji Kimura Plastic Instability in Medium-Carbon Tempered Martensite Steel Materials 14 16 4609 https://doi.org/10.3390/ma14164609 2024-04-26 16:26:43 +0900 Paper 2021 9 Tadanobu Inoue, Shin-ichiro Oka, Toru Hara Three-dimensional microstructure of robust claw of coconut crab, one of the largest terrestrial crustaceans Materials & Design 206 109765 https://doi.org/10.1016/j.matdes.2021.109765 2024-04-26 16:26:43 +0900 Paper 2021 10 Yuuji Kimura, Tadanobu Inoue, Toshio Otani, Akihiro Ochiai, Shohei Ikurumi, Tomohiro Takatsuji Upsizing high-strength fail-safe steel through warm tempforming Materials Science and Engineering: A 819 141514 https://doi.org/10.1016/j.msea.2021.141514 2024-04-26 16:26:43 +0900 Paper 2021 11 Hidetoshi Somekawa, Michiaki Yamasaki, Yoshihito Kawamura, Tadanobu Inoue Wrought-procedure memory in caliber rolled Mg-Y-Zn alloy containing LPSO phase Materials Characterization 175 111080 https://doi.org/10.1016/j.matchar.2021.111080 2024-04-26 16:26:43 +0900 Paper 2021 12 Hai Qiu, Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue Grain-to-Grain Interaction Effect in Polycrystalline Plain Low-Carbon Steel within Elastic Deformation Region Materials 14 8 1865 https://doi.org/10.3390/ma14081865 2024-04-26 16:26:43 +0900 Paper 2021 13 Tadanobu Inoue, Hai Qiu, Rintaro Ueji, Yuuji Kimura Ductile-to-Brittle Transition and Brittle Fracture Stress of Ultrafine-Grained Low-Carbon Steel Materials 14 7 1634 https://doi.org/10.3390/ma14071634 2024-04-26 16:26:43 +0900 Paper 2021 14 R Ueji, Y Kimura, K Ushioda, T Ohmura, T Inoue, A Shibata Orientation dependence of transformation induced plasticity in high carbon bainitic steel IOP Conference Series: Materials Science and Engineering 012022-1 012022-6 https://doi.org/10.1088/1757-899x/1121/1/012022 2024-04-26 16:26:43 +0900 Paper 2021 15 Rintaro Ueji, Akinobu Shibata, Kohsaku Ushioda, Yuuji Kimura, Takahito Ohmura, Tadanobu Inoue Crystallographic orientation dependence of deformation-induced martensitic transformation of 1.3 GPa-class 0.6 %C bainitic steel with retained austenite Scripta Materialia 194 113666 https://doi.org/10.1016/j.scriptamat.2020.113666 2024-04-26 16:26:43 +0900 Paper 2021 16 Tadanobu Inoue, Rintaro Ueji Effect of strain and deformation mode on cube texture formation in warm bi-axial rolled low-carbon steel Finite Elements in Analysis and Design 183-184 103491 https://doi.org/10.1016/j.finel.2020.103491 2024-04-26 16:26:43 +0900 Paper 2020 1 Yuuji Kimura, Tadanobu Inoue Mechanical Property of Ultrafine Elongated Grain Structure Steel Processed by Warm Tempforming and Its Application to Ultra-High-Strength Bolt ISIJ International 60 6 1108 1126 https://doi.org/10.2355/isijinternational.isijint-2019-726 2024-04-26 16:26:43 +0900 Paper 2020 2 Hai Qiu, Tadanobu Inoue, Rintaro Ueji Experimental measurement of the variables of Lüders deformation in hot-rolled steel via digital image correlation Materials Science and Engineering: A 790 139756 https://doi.org/10.1016/j.msea.2020.139756 2024-04-26 16:26:43 +0900 Paper 2020 3 Hai Qiu, Rintaro Ueji, Yuuji Kimura, Tadanobu Inoue Heterogeneous Distribution of Microstrain Evolved During Tensile Deformation of Polycrystalline Plain Low Carbon Steel Metals 10 6 774 https://doi.org/10.3390/met10060774 2024-04-26 16:26:43 +0900 Paper 2020 4 Tadanobu Inoue, Rintaro Ueji Improvement of strength, toughness and ductility in ultrafine-grained low-carbon steel processed by warm bi-axial rolling Materials Science and Engineering: A 786 139415 https://doi.org/10.1016/j.msea.2020.139415 2024-04-26 16:26:43 +0900 Paper 2020 5 Hai Qiu, Tadanobu Inoue, Rintaro Ueji In-Situ Observation of Lüders Band Formation in Hot-Rolled Steel via Digital Image Correlation Metals 10 4 530 https://doi.org/10.3390/met10040530 2024-04-26 16:26:43 +0900 Paper 2020 6 Tadanobu Inoue, Hai Qiu, Rintaro Ueji Through-Thickness Microstructure and Strain Distribution in Steel Sheets Rolled in a Large-Diameter Rolling Process Metals 10 1 91 https://doi.org/10.3390/met10010091 2024-04-26 16:26:43 +0900 Paper 2019 1 木村 勇次, 井上 忠信 温間テンプフォーミングで作製した超微細繊維状結晶粒組織鋼の力学特性と超高強度ボルトへの応用 鉄と鋼 105 2 127 145 https://doi.org/10.2355/tetsutohagane.tetsu-2018-077 2024-04-26 16:26:43 +0900 Paper 2019 2 木村 勇次, 井上 忠信 2000 MPa級超高強度ボルトの開発 橋梁と基礎 109 112 2024-04-26 16:26:43 +0900 Paper 2019 3 Rintaro Ueji, Tadanobu Inoue 体積測定により明らかにした応力によるパーライト変態の加速 Materials Letters 256 126637 https://doi.org/10.1016/j.matlet.2019.126637 2024-04-26 16:26:43 +0900 Paper 2019 4 Rintaro Ueji, Tadanobu Inoue Acceleration of diffusional transformation in a high-carbon steel layer composed of a sandwich-like clad steel sheet Materials Science and Engineering: A 764 138217 https://doi.org/10.1016/j.msea.2019.138217 2024-04-26 16:26:43 +0900 Paper 2019 5 Rintaro Ueji, Tadanobu Inoue 日本刀に見られる積層構造を有する鋼板の引張変形特性に及ぼす界面形態の影響 steel research international 90 5 1900015 https://doi.org/10.1002/srin.201900015 2024-04-26 16:26:43 +0900 Paper 2019 6 Tadanobu Inoue, Rintaro Ueji, Yuuji Kimura Improvement of toughness and strength balance in low-carbon steel bars with cube texture processed by warm bi-axial rolling Materials Letters 240 172 175 https://doi.org/10.1016/j.matlet.2019.01.007 2024-04-26 16:26:43 +0900 Paper 2018 1 井上 忠信, 上路 林太郎, 木村 勇次 炭素鋼の強靭延性化の方向性 日本機械学会論文集 84 866 18 00237 https://doi.org/10.1299/transjsme.18-00237 2024-04-26 16:26:43 +0900 Paper 2018 2 井上忠信 時代に対応した材料・加工プロセス JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY(ぷらすとす／塑性と加工 SOSEI-TO-KAKOU) 11 753 754 2024-04-26 16:26:43 +0900 Paper 2018 3 Hidetoshi Somekawa, Alok Singh, Ryoji Sahara, Tadanobu Inoue Excellent room temperature deformability in high strain rate regimes of magnesium alloy Scientific Reports 8 1 https://doi.org/10.1038/s41598-017-19124-w 2024-04-26 16:26:43 +0900 Paper 2018 4 木村 勇次, 井上 忠信, 中田 隆之, 福田 又一 1.8GPa級超高強度フェールセーフボルトの耐遅れ破壊特性 日本機械学会論文集 84 860 17 00493 https://doi.org/10.1299/transjsme.17-00493 2024-04-26 16:26:43 +0900 Paper 2018 5 Hai Qiu, Linning Wang, Chengduo Wang, Terumi Nakamura, Tadanobu Inoue Mechanical Stability of Retained Austenite in Multi-Pass Cr-Ni Weld Metal in an Over-Matching Welded Joint MATERIALS TRANSACTIONS 59 3 380 385 https://doi.org/10.2320/matertrans.m2017285 2024-04-26 16:26:43 +0900 Paper 2017 1 土田 紀之, 上野 秀平, 井上 忠信 超微細粒鋼の塑性加工限界までの真応力－ひずみ関係におよぼす試験片サイズの影響 日本機械学会論文集 83 847 16 00315 https://doi.org/10.1299/transjsme.16-00315 2024-04-26 16:26:43 +0900 Paper 2017 2 上路 林太郎, 井上 忠信 日本刀型鋼板における層構成が及ぼす引張変形特性への影響 塑性と加工 58 675 323 329 https://doi.org/10.9773/sosei.58.323 2024-04-26 16:26:43 +0900 Paper 2017 3 Haia QIU, Chengduob WANG, Terumi NAKAMURA, Tadanobu INOUE Evolution of strain field in an over-matching welded joint under tension estimated using digital image correlation QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 35 4 154 159 https://doi.org/10.2207/qjjws.35.154 2024-04-26 16:26:43 +0900 Paper 2017 4 Rintaro Ueji, Hai Qiu, Tadanobu Inoue Strength and Ductility at High-speed Tensile Deformation of Low-carbon Steel with Ultrafine Grains MATERIALS TRANSACTIONS 58 10 1487 1492 https://doi.org/10.2320/matertrans.m2017191 2024-04-26 16:26:43 +0900 Paper 2017 5 Tadanobu Inoue Brittle Fracture Stress of Ultrafine-Grained Low-Carbon Steel MATERIALS TRANSACTIONS 58 10 1505 1508 https://doi.org/10.2320/matertrans.m2017135 2024-04-26 16:26:43 +0900 Paper 2017 6 Yuuji Kimura, Tadanobu Inoue, Eiji Akiyama Warm tempforming effect on the hydrogen embrittlement of 1.8-GPa-class ultra-high-strength low-alloy steel Materials Science and Engineering: A 703 503 512 https://doi.org/10.1016/j.msea.2017.07.091 2024-04-26 16:26:43 +0900 Paper 2017 7 Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue 等方・蛇腹変形可能なマグネシウム合金の開発 MATERIALS TRANSACTIONS 58 7 1089 1092 https://doi.org/10.2320/matertrans.m2017108 2024-04-26 16:26:43 +0900 Paper 2017 8 Hidetoshi Somekawa, Hiroyuki Watanabe, Dudekula Althaf Basha, Alok Singh, Tadanobu Inoue Effect of twin boundary segregation on damping properties in magnesium alloy Scripta Materialia 129 35 38 https://doi.org/10.1016/j.scriptamat.2016.10.019 2024-04-26 16:26:43 +0900 Paper 2017 9 染川 英俊, 井上 忠信 結晶粒界制御によるマグネシウム合金の高靱性化 金属 87 1 13 18 2024-04-26 16:26:43 +0900 Paper 2016 1 井上 忠信, 木村 勇次 1800MPa級フェールセーフ鋼の微視き裂発生のクライテリオン（微視組織制御からの破壊制御の構築） 日本機械学会論文集 82 844 16 00246 https://doi.org/10.1299/transjsme.16-00246 2024-04-26 16:26:43 +0900 Paper 2016 2 Lucas Maximo Alves Toughening of low-alloy steel by ultrafine-grained structure (Development of fracture control from microstructure design) FRACTURE MECHANICS Chapter 5 "" 103 120 https://doi.org/10.5772/61602 2024-04-26 16:26:43 +0900 Paper 2016 3 Yuuji Kimura, Tadanobu Inoue 超高強度鋼の強度と靱性に及ぼすオースフォームと温間テンプフォーミングの複合効果の影響 ISIJ International 56 11 2047 2056 https://doi.org/10.2355/isijinternational.isijint-2016-275 2024-04-26 16:26:43 +0900 Paper 2016 4 Hidetoshi Somekawa, Alok Singh, Toshiji Mukai, Tadanobu Inoue Effect of alloying elements on room temperature tensile ductility in magnesium alloys Philosophical Magazine 96 25 2671 2685 https://doi.org/10.1080/14786435.2016.1212174 2024-04-26 16:26:43 +0900 Paper 2016 5 Chengduo Wang, Hai Qiu, Yuuji Kimura, Tadanobu Inoue Morphology, crystallography, and crack paths of tempered lath martensite in a medium-carbon low-alloy steel Materials Science and Engineering: A 669 48 57 https://doi.org/10.1016/j.msea.2016.05.041 2024-04-26 16:26:43 +0900 Paper 2016 6 井上 忠信 高強度材料の創製(鉄鋼材料）における50年間の技術動向と今後の展望 将来加工技術　第136委員会　創設50周年記念誌 "" "" 183 187 2024-04-26 16:26:43 +0900 Paper 2015 1 井上 忠信, 木村 勇次, 邱 海, 王 成鐸 超微細粒組織を活用した1800MPa級超高強度鋼のき裂伝播挙動（微視組織制御からの破壊制御の構築） 日本機械学会論文集 81 830 15 00281 https://doi.org/10.1299/transjsme.15-00281 2024-04-26 16:26:44 +0900 Paper 2015 2 N. Tsuchida, T. Inoue, H. Nakano, T. Okamoto Enhanced true stress-true strain relationship due to grain refinement of a low-carbon ferrite‒pearlite steel Materials Letters 160 117 119 https://doi.org/10.1016/j.matlet.2015.07.093 2024-04-26 16:26:44 +0900 Paper 2015 3 Yuuji Kimura, Tadanobu Inoue 温間テンプフォームで作製した超微細繊維状結晶粒組織鋼の機械的特性に及ぼす旧オーステナイト粒組織の影響 ISIJ International 55 8 1762 1771 https://doi.org/10.2355/isijinternational.isijint-2015-081 2024-04-26 16:26:44 +0900 Paper 2015 4 Hidetoshi Somekawa, Tadanobu Inoue, Kaneaki Tsuzaki Effect of deformation twin on toughness in magnesium binary alloys Philosophical Magazine 95 23 2513 2526 https://doi.org/10.1080/14786435.2015.1065019 2024-04-26 16:26:44 +0900 Paper 2015 5 Tadanobu INOUE, Yuuji KIMURA, Hai QIU フェールセーフ設計された低合金鋼の強度ー靭性バランス Mechanical Engineering Letters 1 0 15 00358 https://doi.org/10.1299/mel.15-00358 2024-04-26 16:26:44 +0900 Paper 2015 6 Yuuji Kimura, Tadanobu Inoue 超微細繊維状結晶粒組織鋼の強靭化に及ぼす炭素量の影響 ISIJ International 55 5 1135 1144 https://doi.org/10.2355/isijinternational.55.1135 2024-04-26 16:26:44 +0900 Paper 2015 7 N. Tsuchida, H. Nakano, T. Okamoto, T. Inoue Effect of Strain Rate on True Stress−True Strain Relationships of Ultrafine-grained Ferrite–Cementite Steels up to Plastic Deformation Limit Materials Science and Engineering: A 626 441 448 https://doi.org/10.1016/j.msea.2014.12.080 2024-04-26 16:26:44 +0900 Paper 2014 1 井上 忠信 塑性加工による超微細粒金属材料の先進的研究 塑性と加工 55 647 1063 1067 https://doi.org/10.9773/sosei.55.1063 2024-04-26 16:26:44 +0900 Paper 2014 2 Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue, Kaneaki Tsuzaki Crack propagation behaviour in magnesium binary alloys Philosophical Magazine 94 29 3317 3330 https://doi.org/10.1080/14786435.2014.956840 2024-04-26 16:26:44 +0900 Paper 2014 3 木村 勇次, 井上 忠信 超微細繊維状結晶粒組織鋼の強靭化に及ぼす炭素量の影響 鉄と鋼 100 9 1104 1113 https://doi.org/10.2355/tetsutohagane.100.1104 2024-04-26 16:26:44 +0900 Paper 2014 4 Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue Enhancement of toughness by grain boundary control in magnesium binary alloys Materials Science and Engineering: A 612 172 178 https://doi.org/10.1016/j.msea.2014.06.001 2024-04-26 16:26:44 +0900 Paper 2014 5 Chengduo Wang, Hai Qiu, Tadanobu Inoue, Qiwen Yao Band gap engineering of SrTiO3 for water splitting under visible light irradiation International Journal of Hydrogen Energy 39 24 12507 12514 https://doi.org/10.1016/j.ijhydene.2014.06.059 2024-04-26 16:26:44 +0900 Paper 2014 6 Chengduo Wang, Hai Qiu, Tadanobu Inoue, Qiwen Yao, Yanwei Ma Investigation on the effects of native defects on electronic structure in MgB2 by first-principles calculation Computational Materials Science 90 153 156 https://doi.org/10.1016/j.commatsci.2014.04.023 2024-04-26 16:26:44 +0900 Paper 2014 7 Chengduo Wang, Hai Qiu, Tadanobu Inoue, Qiwen Yao 改良Becke-Johnsonポテンシャルを用いた計算によりIとMnドープBiOClの電子構造 Computational Materials Science 85 138 141 https://doi.org/10.1016/j.commatsci.2013.12.056 2024-04-26 16:26:44 +0900 Paper 2014 8 Chengduo Wang, Hai Qiu, Tadanobu Inoue, Qiwen Yao 可視光光触媒用の高活性のSrTiO3：第一原理予測 Solid State Communications 181 5 8 https://doi.org/10.1016/j.ssc.2013.11.026 2024-04-26 16:26:44 +0900 Paper 2013 1 Chengduo Wang, Hai Qiu, Tadanobu Inoue 超細粒伸長フェライト鋼におけるき裂パス ISIJ International 53 12 2272 2274 https://doi.org/10.2355/isijinternational.53.2272 2024-04-26 16:26:44 +0900 Paper 2013 2 Hidetoshi Somekawa, Tadanobu Inoue, Kaneaki Tsuzaki Effect of solute atoms on fracture toughness in dilute magnesium alloys Philosophical Magazine 93 36 4582 4592 https://doi.org/10.1080/14786435.2013.838008 2024-04-26 16:26:44 +0900 Paper 2013 3 Yuuji Kimura, Tadanobu Inoue, Kaneaki Tsuzaki Tempforming in medium-carbon low-alloy steel Journal of Alloys and Compounds 577 S538 S542 https://doi.org/10.1016/j.jallcom.2011.12.123 2024-04-26 16:26:44 +0900 Paper 2013 4 Tadanobu Inoue, Akira Yanagida, Jun Yanagimoto Finite element simulation of accumulative roll-bonding process Materials Letters 106 37 40 https://doi.org/10.1016/j.matlet.2013.04.093 2024-04-26 16:26:44 +0900 Paper 2013 5 Shojiro Ochiai, Shigetaka Kuboshima, Hiroshi Okuda, Kohei Morishita, Tadanobu Inoue, Toshihiro Ishikawa, Mitsuhiko Sato Estimation of Fracture Toughness of SiC Fiber and Statistical Analysis of Change in Fracture Strength Distribution with Notch Size MATERIALS TRANSACTIONS 54 10 1916 1924 https://doi.org/10.2320/matertrans.maw201302 2024-04-26 16:26:44 +0900 Paper 2013 6 Noriyuki Tsuchida, Tadanobu Inoue, Haruka Nakano Effect of ferrite grain size on the estimated true stress–true strain relationship up to the plastic deformation limit in low carbon ferrite–cementite steels Journal of Materials Research 28 16 2171 2179 https://doi.org/10.1557/jmr.2013.221 2024-04-26 16:26:44 +0900 Paper 2013 7 井上 忠信, 木村 勇次 超微細粒組織を活用した低炭素鋼の強靭化 日本機械学会論文集Ａ編 79 804 1226 1238 https://doi.org/10.1299/kikaia.79.1226 2024-04-26 16:26:44 +0900 Paper 2013 8 Tadanobu Inoue, Yuuji Kimura Effect of initial notch orientation on fracture toughness in fail-safe steel Journal of Materials Science 48 13 4766 4772 https://doi.org/10.1007/s10853-012-6874-4 2024-04-26 16:26:44 +0900 Paper 2013 9 Yuuji Kimura, Tadanobu Inoue 超高強度中炭素低合金鋼の組織および機械的特性に及ぼす温間テンプフォーミングの影響 Metallurgical and Materials Transactions A 44 1 560 576 https://doi.org/10.1007/s11661-012-1391-2 2024-04-26 16:26:44 +0900 Paper 2013 10 Hidetoshi Somekawa, Shunsuke Maeda, Tomoko Hirayama, Takashi Matsuoka, Tadanobu Inoue, Toshiji Mukai Microstructuralevolutionduringdryweartestinmagnesium and Mg–Yalloy Materials Science and Engineering: A 561 371 377 https://doi.org/10.1016/j.msea.2012.10.034 2024-04-26 16:26:44 +0900 Paper 2012 1 木村 勇次, 井上 忠信 中炭素低合金鋼の温間テンプフォーミングで形成した超微細繊維状結晶粒組織 熱処理 52 6 299 300 2024-04-26 16:26:44 +0900 Paper 2012 2 木村 勇次, 井上 忠信 超微細繊維状結晶粒組織を有するフェールセーフ鋼の強靭化 ふぇらむ 17 12 829 835 2024-04-26 16:26:44 +0900 Paper 2012 3 土田 紀之, 井上 忠信, 榎並 啓太郎 様々な金属材料を用いた断続引張試験とBridgman の式による破断直前までの真の応力世劼困澳愀犬凌篁ｻ 日本金属学会誌 76 10 579 586 https://doi.org/10.2320/jinstmet.76.579 2024-04-26 16:26:44 +0900 Paper 2012 4 Tadanobu Inoue, Yuuji Kimura, Shojiro Ochiai Shape effect of ultrafine-grained structure on static fracture toughness in low-alloy steel Science and Technology of Advanced Materials 13 3 035005 https://doi.org/10.1088/1468-6996/13/3/035005 2024-04-26 16:26:44 +0900 Paper 2012 5 長島 伸夫, 古谷 佳之, 木村 勇次, 井上 忠信 温間テンプフォーミング処理を施した超微細粒鋼の疲労特性 TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS, SERIES A(日本機械学会論文集 A編) 78 790 154 158 2024-04-26 16:26:44 +0900 Paper 2012 6 Yihong Nie, Yuuji Kimura, Tadanobu Inoue, Fuxing Yin, Eiji Akiyama, Kaneaki Tsuzaki 超微細繊維状結晶粒組織を有する1500MPa級鋼の水素脆化 Metallurgical and Materials Transactions A 43 5 1670 1687 https://doi.org/10.1007/s11661-011-0974-7 2024-04-26 16:26:44 +0900 Paper 2012 7 N. Tsuchida, T. Inoue, K. Enami 様々な金属材料における破壊直前までの真応力と真ひずみの評価 MATERIALS TRANSACTIONS 53 1 133 139 https://doi.org/10.2320/matertrans.md201112 2024-04-26 16:26:44 +0900 Paper 2011 1 Tadanobu Inoue, Yuuji Kimura, Shojiro Ochiai フェールセーフ鋼の静的破壊靭性 Scripta Materialia 65 6 552 555 https://doi.org/10.1016/j.scriptamat.2011.06.025 2024-04-26 16:26:44 +0900 Paper 2011 2 Hidetoshi Somekawa, Tadanobu Inoue, Alok Singh, Toshiji Mukai Deformation Mechanism in the Crack-Tip Region of Fine-Grained Magnesium Alloy Metallurgical and Materials Transactions A 42 8 2475 2480 https://doi.org/10.1007/s11661-011-0642-y 2024-04-26 16:26:44 +0900 Paper 2010 1 Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue, Toshiji Mukai Enhancing Fracture Toughness of Magnesium Alloy by Formation of Low-Angle Grain Boundary Structure Advanced Engineering Materials 12 9 837 842 https://doi.org/10.1002/adem.201000050 2024-04-26 16:26:44 +0900 Paper 2010 2 S. Ochiai, S. Kuboshima, K. Morishita, H. Okuda, T. Inoue 収束イオンビームで人工付与されたAl2O3繊維の破壊靱性 Journal of the European Ceramic Society 30 7 1659 1667 https://doi.org/10.1016/j.jeurceramsoc.2009.12.020 2024-04-26 16:26:44 +0900 Paper 2010 3 Hidetoshi Somekawa, Tadanobu Inoue, Toshiji Mukai Deformation mechanism near crack-tip by finite element analysis and microstructure observation in magnesium alloys Materials Science and Engineering: A 527 7-8 1761 1768 https://doi.org/10.1016/j.msea.2009.11.006 2024-04-26 16:26:44 +0900 Paper 2010 4 Yuuji Kimura, Tadanobu Inoue, Fuxing Yin, Kaneaki Tsuzaki 温間テンプフォーミングで作製された超微細結晶粒組織鋼のデラミネーションタフニング ISIJ International 50 1 152 161 https://doi.org/10.2355/isijinternational.50.152 2024-04-26 16:26:44 +0900 Paper 2010 5 Tadanobu Inoue, Fuxing Yin, Yuuji Kimura, Kaneaki Tsuzaki, Shojiro Ochiai 温間溝ロール圧延で創製された超微細粒低炭素鋼の衝撃特性に関する層状破壊の影響 Metallurgical and Materials Transactions A 41 2 341 355 https://doi.org/10.1007/s11661-009-0093-x 2024-04-26 16:26:44 +0900 Paper 2010 6 Noriaki Hirota, Fuxing Yin, Tsukasa Azuma, Tadanobu Inoue Yield stress of duplex stainless steel specimens estimated using a compound Hall–Petch equation Science and Technology of Advanced Materials 11 2 025004 https://doi.org/10.1088/1468-6996/11/2/025004 2024-04-26 16:26:44 +0900 Paper 2010 7 Toshiji Mukai, Hidetoshi Somekawa, Tadanobu Inoue, Alok Singh Strengthening Mg–Al–Zn alloy by repetitive oblique shear strain with caliber roll Scripta Materialia 62 2 113 116 https://doi.org/10.1016/j.scriptamat.2009.09.005 2024-04-26 16:26:44 +0900 Paper 2010 8 Joo-Hee Kang, Tadanobu Inoue, Shiro Torizuka Effect of Shear Strain on the Microstructural Evolution of a Low Carbon Steel during Warm Deformation MATERIALS TRANSACTIONS 51 1 27 35 https://doi.org/10.2320/matertrans.mb200916 2024-04-26 16:26:44 +0900 Paper 2009 1 染川 英俊, 井上 忠信, 向井 敏司 移動用部材に適応可能な軽量マグネシウム合金の開発 塑性と加工 50 579 291 295 https://doi.org/10.9773/sosei.50.291 2024-04-26 16:26:44 +0900 Paper 2009 2 井上 忠信, 殷 福星 温間クロスロール圧延鋼板のひずみと集合組織 Journal of the Japan Society for Technology of Plasticity 50 578 227 231 https://doi.org/10.9773/sosei.50.227 2024-04-26 16:26:44 +0900 Paper 2009 3 Tadanobu Inoue, Hidetoshi Somekawa, Toshiji Mukai 多パス溝ロール圧延によるAZ31マグネシウム合金のひずみ分布と硬さ変化 Advanced Engineering Materials 11 8 654 658 https://doi.org/10.1002/adem.200900103 2024-04-26 16:26:44 +0900 Paper 2009 4 Tadanobu Inoue, Nobuhiro Tsuji 有限要素解析による無潤滑下での繰り返し接合圧延におけるひずみの定量化 Computational Materials Science 46 1 261 266 https://doi.org/10.1016/j.commatsci.2009.03.005 2024-04-26 16:26:44 +0900 Paper 2009 5 Tadanobu Inoue, Zenji Horita, Hidetoshi Somekawa, Fuxing Yin ECAPと焼鈍で作製された純アルミニウムの圧縮変形中のひずみと硬さ分布 MATERIALS TRANSACTIONS 50 1 27 33 https://doi.org/10.2320/matertrans.md200819 2024-04-26 16:26:44 +0900 Paper 2009 6 Joo-Hee Kang, Tadanobu Inoue, Shiro Torizuka Effect of Strain on Microstructural Evolution under Warm Deformation in an Ultra-Low Carbon Steel MATERIALS TRANSACTIONS 50 1 34 39 https://doi.org/10.2320/matertrans.md200816 2024-04-26 16:26:44 +0900 Paper 2008 1 鳥塚 史郎, 長井 寿, 井上 忠信, 花村 年裕, 村松 榮次郎, S. V. S. N. MURTY, 林 透, 大森 章夫 鋼の結晶粒超微細化と棒鋼・板材製造への基礎研究 塑性と加工 49 575 1135 1139 https://doi.org/10.9773/sosei.49.1135 2024-04-26 16:26:44 +0900 Paper 2008 2 井上 忠信, 鳥塚 史郎, 村松 栄次郎, 長井 寿 実機溝ロール圧延機による超微細粒組織棒鋼の創成 鉄と鋼 94 5 164 172 https://doi.org/10.2355/tetsutohagane.94.164 2024-04-26 16:26:44 +0900 Paper 2008 3 Tadanobu Inoue, Zenji Horita, Hidetoshi Somekawa, Kazuyuki Ogawa 圧縮強加工された純アルミニウムの硬さ変化とひずみ分布に関する初期粒径サイズの影響 Acta Materialia 56 20 6291 6303 https://doi.org/10.1016/j.actamat.2008.08.042 2024-04-26 16:26:44 +0900 Paper 2008 4 鳥塚 史郎, 村松 榮次郎, 井上 忠信, 長井 寿 オーバル孔型とスクエア孔型を用いた他方向大ひずみ圧延によって生成する微細粒組織と力学的性質の関係 日本金属学会誌 72 8 571 580 https://doi.org/10.2320/jinstmet.72.571 2024-04-26 16:26:44 +0900 Paper 2008 5 Akio Kishi, Seiji Kuroda, Tadanobu Inoue, Takeshi Fukushima, Hisami Yumoto 溶射皮膜の密着性評価のための円周型予き裂を有する引っ張り試験片 Journal of Thermal Spray Technology 17 2 228 233 https://doi.org/10.1007/s11666-008-9168-2 2024-04-26 16:26:44 +0900 Paper 2008 6 Y. Kimura, T. Inoue, F. Yin, K. Tsuzaki 超微細結晶粒組織鋼における靭性の逆温度依存性 Science 320 5879 1057 1060 https://doi.org/10.1126/science.1156084 2024-04-26 16:26:44 +0900 Paper 2008 7 Noriaki Hirota, Fuxing Yin, Tadanobu Inoue, Tsukasa Azuma 大ひずみ加工されたSUS316Lステンレス鋼の非等温焼鈍処理時における再結晶・粒成長挙動 ISIJ International 48 4 475 482 https://doi.org/10.2355/isijinternational.48.475 2024-04-26 16:26:44 +0900 Paper 2008 8 M. Watanabe, S. Kuroda, K. Yokoyama, T. Inoue, Y. Gotoh Modified Tensile Adhesion Test for Evaluation of Interfacial Toughness of HVOF Sprayed Coatings Surface and Coatings Technology 202 9 1746 1752 https://doi.org/10.1016/j.surfcoat.2007.07.028 2024-04-26 16:26:44 +0900 Paper 2007 1 井上 忠信, 落合 朋之, 殷 福星, 長井 寿 実機鍛造プレスによる超微細粒組織厚鋼板の試作 鉄と鋼 93 11 693 702 https://doi.org/10.2355/tetsutohagane.93.693 2024-04-26 16:26:44 +0900 Paper 2007 2 T. Inoue, F. Yin, Y. Kimura Strain distribution and microstructural evolution in multi-pass warm caliber rolling Materials Science and Engineering: A 466 1-2 114 122 https://doi.org/10.1016/j.msea.2007.02.098 2024-04-26 16:26:44 +0900 Paper 2007 3 Y. Kimura, T. Inoue, F. Yin, O. Sitdikov, K. Tsuzaki 超微細繊維状組織形成による1500MPa級鋼の靭化 Scripta Materialia 57 6 465 468 https://doi.org/10.1016/j.scriptamat.2007.05.039 2024-04-26 16:26:44 +0900 Paper 2007 4 Tadanobu Inoue, Fuxing Yin, Yuuji Kimura Crystallographic Texture of Warm Caliber Rolled Low Carbon Steel MATERIALS TRANSACTIONS 48 8 2028 2035 https://doi.org/10.2320/matertrans.ma200703 2024-04-26 16:26:44 +0900 Paper 2007 5 Sohei Iwamoto, Shojiro Ochiai, Hiroshi Okuda, Tadanobu Inoue Analysis of Buckling and Interfacial Debonding of Galvannealed Coating Layer on Steel Substrates under Applied Tensile Strain ISIJ International 47 6 930 934 https://doi.org/10.2355/isijinternational.47.930 2024-04-26 16:26:44 +0900 Paper 2006 1 Shusaku Takagi, Satoshi Terasaki, TSUZAKI, Kaneaki, INOUE, Tadanobu, Fumiyoshi Minami MATERIALS SCIENCE FORUM 2155 2161 2024-04-26 16:26:44 +0900 Paper 2006 2 Kohei Morishita, Shojiro Ochiai, Hiroshi Okuda, Toshihiro Inshikawa, Mitsuhiko Sato, Tadanobu Inoue Journal of the American Ceramic Society 89 8 2571 2576 https://doi.org/10.1111/j.1551-2916.2006.01116.x 2024-04-26 16:26:44 +0900 Paper 2006 3 広田憲亮, 井上 忠信, 木村 勇次, 東司, 長井 寿 温間溝ロール圧延によって創製されたオーステナイト系ステンレス棒鋼の軟化特性と強度 JOURNAL OF THE JAPAN SOCIETY FOR HEAT TREATMENT 46 4 214 220 2024-04-26 16:26:44 +0900 Paper 2005 1 Shusaku TAKAGI, Satoshi TERASAKI, Kaneaki TSUZAKI, Tadanobu INOUE, Fumiyoshi MINAMI ISIJ International 45 2 263 271 https://doi.org/10.2355/isijinternational.45.263 2024-04-26 16:26:44 +0900 Paper 2005 2 井上 忠信, 殷 福星, 長井 寿 多パスクロスロール圧延による鋼板断面の形状制御-第3報　せん断付与圧延鋼板における創形創質に関する研究 JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY 46 539 1169 1173 2024-04-26 16:26:44 +0900 Paper 2005 3 井上 忠信, 殷 福星, 木村 勇次, 長井 寿 溝ロール圧延による超微細組織棒鋼のひずみと組織，硬さ分布 日本金属学会誌 69 11 943 952 https://doi.org/10.2320/jinstmet.69.943 2024-04-26 16:26:44 +0900 Paper 2005 4 井上 忠信, 鳥塚 史郎, 長井 寿 数値解析による超微細組織棒鋼創製のための高効率加工プロセスの提案 日本金属学会誌 69 11 934 942 https://doi.org/10.2320/jinstmet.69.934 2024-04-26 16:26:44 +0900 Paper 2005 5 井上 忠信, 長井 寿 クロスロール圧延におけるひずみ分布の数値解析(第2報　せん断付与圧延鋼板における創形創質に関する研究） JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY 46 538 1076 1080 2024-04-26 16:26:44 +0900 Paper 2005 6 井上 忠信, 曹 財榮, 殷 福星, 長井 寿 熱間加工されたNI-30Fe 合金の内部組織におよぼすせん断変形の影響 日本金属学会誌 69 4 341 347 https://doi.org/10.2320/jinstmet.69.341 2024-04-26 16:26:44 +0900 Paper 2005 7 井上 忠信, 岩崎 智, 長井 寿 クロスロール圧延による鋼板の変形特性-せん断付与圧延鋼板における創形創質に関する研究　第1報 JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY 46 537 989 993 2024-04-26 16:26:44 +0900 Paper 2005 8 YIN, Fuxing, INOUE, Tadanobu, NAGAI, Kotobu 二方向圧延した低炭素鋼に生成したcubic集合組織 MATERIALS SCIENCE FORUM 387 392 2024-04-26 16:26:44 +0900 Paper 2004 1 Jae-Young Cho, Tadanobu Inoue, Fuxing Yin, Kotobu Nagai 熱間加工されたNi-30Fe合金の加工組織形成における初期結晶方位の影響 MATERIALS TRANSACTIONS 45 10 2960 2965 https://doi.org/10.2320/matertrans.45.2960 2024-04-26 16:26:44 +0900 Paper 2004 2 Jae-Young Cho, Tadanobu Inoue, Fuxing Yin, Kotobu Nagai 熱間加工中におけるNi-30Fe合金の組織形成におけるせん断変形の影響 MATERIALS TRANSACTIONS 45 10 2966 2973 https://doi.org/10.2320/matertrans.45.2966 2024-04-26 16:26:44 +0900 Paper 2004 3 高木 周作, 寺崎 聡, 津崎 兼彰, 井上 忠信, 南 二三吉 Local Approach的手法の適用による高強度鋼の水素割れ感受性評価 溶接学会論文集 22 1 125 131 https://doi.org/10.2207/qjjws.22.125 2024-04-26 16:26:44 +0900 Paper 2004 4 井上 忠信 加工ひずみ制御による高効率な結晶粒微細化技術の探索 JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY 45 527 1042 1044 2024-04-26 16:26:44 +0900 Paper 2004 5 Fuxing Yin, Toshihiro Hanamura, Tadanobu Inoue, Kotobu Nagai 溝ロールで創製した超微細低炭素鋼のファイバー集合組織と微細構造 Metallurgical and Materials Transactions A 35 2 665 677 https://doi.org/10.1007/s11661-004-0378-z 2024-04-26 16:26:44 +0900