SAMURAI - NIMS Researchers Database

HOME > プロフィール > 本郷 宏通

  • 論文・発表

[研究論文] |[書籍] |[会議録] |[口頭発表] |[特許]

研究論文 TSV

2019
  1. Hideki TSURUTA, Hiroyuki TODA, Masataka YATOMI, Kimiaki YOSHIDA, Akihisa TAKEUCHI, Masayuki UESUGI, Masaaki TABUCHI, Hiromichi HONGOU. Quantitative Evaluation of Creep Voids in Mod.9Cr-1Mo Steel Welded Joints with X - Ray Micro-Tomography. Journal of the Society of Materials Science, Japan. 68 [8] (2019) 599-606 10.2472/jsms.68.599
  2. Shin-ichi KOMAZAKI, Takahiro TSUKAMOTO, Keisuke MIYATA, Masaaki TABUCHI, Hiromichi HONGO. 高Crフェライト系耐熱鋼溶接継手部のクリープに伴う水素放出特性の変化. Journal of the Society of Materials Science, Japan. 68 [2] (2019) 106-113 10.2472/jsms.68.106
  3. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi. Creep Behavior in Pure Magnesium at Room Temperature. MATERIALS TRANSACTIONS. 60 [6] (2019) 975-979 10.2320/matertrans.m2018334
  4. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Maaouia Souissi, Ryoji Sahara, Collin Whitt, Wei Zhang, M.J. Mills. Creep lifetime and microstructure evolution in boron-added 9Cr–1Mo heat-resistant steel. Materials Science and Engineering: A. 760 (2019) 267-276 10.1016/j.msea.2019.05.114
  5. Y. Liu, S. Tsukamoto, H. Hongo, F. Yin, M. Tabuchi, F. Abe. Microstructure Evolution of Fine-Grained Heat-Affected Zone of Gr.92 Steel Welded Joint During Creep. Metallurgical and Materials Transactions A. 50 [7] (2019) 3080-3090 10.1007/s11661-019-05245-6
2017
  1. Masaaki Tabuchi, Hiromichi Hongo, Tetsuya Matsunaga. Long-term creep strength and fracture of Gr.91 steel welds. Materials at High Temperatures. 34 [5-6] (2017) 466-472 10.1080/09603409.2017.1378974
  2. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi. Interfacial failure in dissimilar weld joint of high boron 9% chromium steel and nickel-based alloy under high-temperature creep condition. Materials Science and Engineering: A. 695 (2017) 302-308 10.1016/j.msea.2017.04.012
  3. Takashi WATANABE, Masayoshi YAMAZAKI, Hiromichi HONGO, Masaaki TABUCHI, Tatsuhiko TANABE. Relationship between Type IV Fracture and Microstructure on 9Cr-1Mo-V-Nb Steel Welded Joint Creep-ruptured after Long Term. Tetsu-to-Hagane. 90 [4] (2017) 206-212 10.2355/tetsutohagane1955.90.4_206
  4. Tetsuya MATSUNAGA, Hiromichi HONGO, Masaaki TABUCHI. Ductility Loss in Ni-based Weld Metal under High Temperature Creep Condition. Journal of the Society of Materials Science, Japan. 66 [2] (2017) 138-141 10.2472/jsms.66.138
  5. Toshihiro OHTANI, Takumi HONMA, Yutaka ISHII, Masaaki TABUCHI, Hiromichi HONGO, Masahiko HIRAO. Creep-Induced Nonlinear Ultrasonic Change in ASME Gr. 91 Steel Welded Joint. Journal of the Society of Materials Science, Japan. 66 [2] (2017) 114-121 10.2472/jsms.66.114
  6. 本郷 宏通, 田淵 正明, 松永 哲也. Gr.91鋼溶接継手の長時間クリープ強度と破壊. JOURNAL OF THE JAPANESE SOCIETY FOR STRENGTH AND FRACTURE OF MATERIALS. 50 [2] (2017) 25-34
  7. Tetsuya Matsunaga, Hiromichi Hongo, Masaaki Tabuchi, Yuhki Satoh, Hiroaki Abe. Transition of creep mechanism by solute hydrogen in Zircaloy-4. Materials Science and Engineering: A. 684 (2017) 191-195 10.1016/j.msea.2016.12.057
2015
  1. T. Matsunaga, H. Somekawa, H. Hongo, M. Tabuchi. Deformation mechanism transition with strain rate in Mg–3Al–1Zn alloy at room temperature. Materials Science and Engineering: A. 647 (2015) 212-215 10.1016/j.msea.2015.09.029
  2. M. Tabuchi, H. Hongo, R. Sugiura, A.T. Yokobori, M. Yatomi, K. Kobayashi. Evaluation of damage and fracture of high Cr steel welds at elevated temperatures. Strength, Fracture and Complexity. 9 [1] (2015) 31-41 10.3233/sfc-150177
  3. Toshihiro OHTANI, Takumi HONMA, Yutaka ISHII, Masaaki TABUCHI, Hiromichi HONGO, Masahiko HIRAO. Evolutions of Nonlinear Acoustics and Microstructural Change during Creep in Gr. 122 Steel Welded Joint. Journal of the Society of Materials Science, Japan. 64 [2] (2015) 80-87 10.2472/jsms.64.80
2006
  1. Masaaki TABUCHI, Masayuki KONDO, Hiromichi HONGO, Takashi WATANABE, Fuxing YIN, Fujio ABE. Improvement of Creep Properties of High Cr Steel Weldment by Boron Addition. Journal of the Society of Materials Science, Japan. 54 [2] (2006) 162-167 10.2472/jsms.54.162
  2. Hiromichi HONGO, Masayoshi YAMAZAKI, Takashi WATANABE, Masaaki TABUCHI, Tatsuhiko TANABE, Yoshio MONMA. Effect of Local Fluctuation of the High Temperature Strength Properties in Weld Metal on Creep Deformation Behavior of Multi-Layer Welded Joint. Journal of the Society of Materials Science, Japan. 54 [2] (2006) 155-161 10.2472/jsms.54.155
  3. M Tabuchi, H Hongo, T Watanabe, AT Yokobori. Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel. Journal of ASTM International. 3 [5] (2006) 13226 10.1520/jai13226
  4. Shaju K. Albert, Matsui Masakazu, WATANABE, Takashi, HONGO, Hiromichi, KUBO, Kiyoshi, TABUCHI, Masaaki. Creep Behaviour of Weld Joints and Simulated HAZs of a High Cr Ferritic Steel. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS. 59 [1] (2006) 47-55
  5. Takashi Watanabe, Masaaki Tabuchi, Masayoshi Yamazaki, Hiromichi Hongo, Tatsuhiko Tanabe. Creep damage evaluation of 9Cr–1Mo–V–Nb steel welded joints showing Type IV fracture. International Journal of Pressure Vessels and Piping. 83 [1] (2006) 63-71 10.1016/j.ijpvp.2005.09.004
2005
  1. Kazuhiro KIMURA, Takashi WATANABE, Hiromichi HONGO, Masayoshi YAMAZAKI, Jun-ichi KINUGAWA, Hirosada IRIE. Effects of Full Annealing Heat Treatment on Long-term Creep Strength of 2.25Cr-1Mo Steel Welded Joint. QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY. 21 [2] (2005) 195-203 10.2207/qjjws.21.195
  2. S. K. Albert, M. Tabuchi, H. Hongo, T. Watanabe, K. Kubo, M. Matsui. Effect of welding process and groove angle on type IV cracking behaviour of weld joints of a ferritic steel. Science and Technology of Welding and Joining. 10 [2] (2005) 149-157 10.1179/174329305x36034
2004
  1. HONGO, Hiromichi, YAMAZAKI, Masayoshi, WATANABE, Takashi, TANABE, Tatsuhiko, TABUCHI, Masaaki, 門馬義雄. EVALUATION OF CREEP PROPERTIES FOR 316FR STEEL THICK PLATE WELDMENT USING MINIATURE CREEP SPECIMEN. ACTA METALLURGICA SINICA. 17 [4] (2004) 369-374
  2. TABUCHI, Masaaki, KONDO, MASAYUKI, WATANABE, Takashi, HONGO, Hiromichi, YIN, Fuxing, ABE, Fujio. Improvement of Type IV Cracking Resistance of 9Cr Heat Resisting Steel Weldment by Boron Addition. ACTA METALLURGICA SINICA. 17 [4] (2004) 331-337
  3. Masaaki Tabuchi, Jechang Ha, Hiromichi Hongo, Takashi Watanabe, Toshimitsu Yokobori. Experimental and numerical study on the relationship between creep crack growth properties and fracture mechanisms. Metallurgical and Materials Transactions A. 35 [6] (2004) 1757-1764 10.1007/s11661-004-0084-x
  4. Jechang Ha, Masaaki Tabuchi, Hiromichi Hongo, A. Toshimitsu Yokobori, Akio Fuji. Creep crack growth properties for 12CrWCoB rotor steel using circular notched specimens. International Journal of Pressure Vessels and Piping. 81 [5] (2004) 401-407 10.1016/j.ijpvp.2004.03.011
  5. S.K Albert, M Matsui, H Hongo, T Watanabe, K Kubo, M Tabuchi. Creep rupture properties of HAZs of a high Cr ferritic steel simulated by a weld simulator. International Journal of Pressure Vessels and Piping. 81 [3] (2004) 221-234 10.1016/j.ijpvp.2004.01.003
  6. Takashi Watanabe, Masayoshi Yamazaki, Hiromichi Hongo, Masaaki Tabuchi, Tatsuhiko Tanabe. Effect of stress on microstructural change due to aging at 823 K in multi-layer welded joint of 2.25Cr–1Mo steel. International Journal of Pressure Vessels and Piping. 81 [3] (2004) 279-284 10.1016/j.ijpvp.2003.12.017

書籍 TSV

会議録 TSV

2016
  1. Toshihiro Ohtani, Takumi Honma, Yutaka Ishii, TABUCHI, Masaaki, HONGO, Hiromichi, Masahiko Hirao. Nonlinear Ultrasonic Change in High Cromium Ferritic Heat Resisting Steel Welded Joint During Creep. Electromagnetic Nondestructive Evaluation (XIX) 2016, 94-101
  2. MATSUNAGA, Tetsuya, TABUCHI, Masaaki, HONGO, Hiromichi, SAHARA, Ryoji. Microstructure of Heat-Affected Zone in High-B 9Cr Steels. Proc. 9th China-Japan Bilateral Symposium on High Temperature Strength of Materials 2016, 89-92
  3. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. Abnormal steady state creep of Zircaloy-4. PRICM9 Proceedings 2016, 714-716
  4. SAHARA, Ryoji, MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. A first principles study of stabilizing mechanism by boron in body-centered cubic iron through (Fe,Cr)23(C,B)6 precipitates. A first principles study of stabilizing mechanism by boron in body-centered cubic iron through (Fe,Cr)23(C,B)6 precipitates 2016, 919-921
  5. Tetsuya Matsunaga, Hidetoshi Somekawa, Hiromichi Hongo, Masaaki Tabuchi. Strain-Rate Sensitivity Enhanced by Grain-Boundary Sliding in Creep Condition for AZ31 Magnesium Alloy at Room Temperature. MATERIALS SCIENCE FORUM 2016, 106-109
  6. Toshihiro Ohtani, Takumi Honma, Yutaka Ishii, Masaaki Tabuchi, Hiromichi Hongo, Masahiko Hirao. Change of nonlinear acoustics in ASME grade 122 steel welded joint during creep. AIP Conference Proceedings 2016, -
  7. HONGO, Hiromichi, MATSUNAGA, Tetsuya, TABUCHI, Masaaki. Long-term Creep Strength and Fracture of 9Cr Steel Welds. Proc. 9th China-Japan Bilateral Symposium on High Temperature Strength of Materials 2016, 172-176
2014
  1. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep Strength of Dissimilar Welded Joints Using High B-9Cr Steel for A-USC Boiler. Proc. 10th Liege Conf. : Materials for Advanced Power Engineering 2014 2014, 101-110
  2. TABUCHI, Masaaki, HONGO, Hiromichi. Creep Damage and Fracture in Weld Joints of High-Cr Steels . Proceedings of International Institute of Welding - International Welding Congress 2014 (IIW-IC2014) 2014, 407-412
  3. HONGO, Hiromichi, TABUCHI, Masaaki. Microstructural Changes and Type-IV Damage Evolutions During Creep in High Cr Ferritic Steel Welds. Proc. 10th Liege Conf.: Materials for Advanced Power Engineering 2014 2014, 111-120
2013
  1. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep Strength of Dissimilar Weld using High B-9Cr steel for A-USC Boiler. Proc. ASME 2013 Pressure Vessels & Piping Conference 2013, 1-5
  2. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep Strength of Dissimilar Welds for Advanced USC Boiler Materials. Proc. 13th International Conference on Fracture (ICF13) 2013, S22-023-1-S22-023-7
  3. TABUCHI, Masaaki, HONGO, Hiromichi, ABE, Fujio. Creep strength of welded joints using high B-9Cr steel for advanced USC boiler. Proc. 8th Japan-China Bilateral Symposium on High Temperature Strength of Materials 2013, 9999-1-9999-5
2010
  1. 本郷 宏通, 田淵 正明, 渡部 隆, 劉 源, 塚本 進. 高Cr鋼溶接継手におけるType-IV損傷の評価. Proceedings of the 48th Symposium on Strength of Materials at High Temperatures 2010, 69-73
  2. TABUCHI, Masaaki, HONGO, Hiromichi. Evaluation of Microstructures and Creep Damages in the High Cr Ferritic Steel Welds. Proc. 7th China-Japan Bilateral Symposium on High Temperature Strength of Materials 2010, 244-249
  3. TABUCHI, Masaaki, HONGO, Hiromichi. Evaluation of Long-Term Creep Damage in High Cr Ferritic Steel Welds. Proceedings of International HIDA-5 Conference 2010, 1-12
2009
  1. HONGO, Hiromichi, TABUCHI, Masaaki, TAKAHASHI Yukio. Microstructures and Type-IV creep damage of high Cr steel welds. JOURNAL OF SOLID MECHANICS AND MATERIALS ENGINEERING 2009, 464-474
  2. 本郷 宏通, 田淵 正明, 渡部 隆. P122鋼溶接継手の長時間クリープ損傷評価. 第53回日本学術会議材料工学連合講演会 講演論文集 2009, 109-110
  3. TABUCHI, Masaaki, HONGO, Hiromichi, WATANABE, Takashi, SAWADA, Kota, Yukio Takahashi. Evaluation of Type-IV Creep Damages in Thick Welded Joint for High Cr Steels. Proceedings 12th International Conference on Fracture 2009, 9999-9999
  4. TABUCHI, Masaaki, HONGO, Hiromichi, SAWADA, Kota, Yukio Takahashi. Effect of Boron on Creep Strength of High Cr Steel Welds. Proc. Creep & Fracture in High Temperature Components 2009, 227-237
  5. TABUCHI, Masaaki, HONGO, Hiromichi. Creep Damage Behavior of Welded Joints for High Cr Steels. Proc. 3rd Symposium on Heat Resistant Steels and Alloys for High Efficiency USC Power Plants 2009 2009, 9999-9999
2007
  1. 本郷 宏通, 田淵 正明, 高橋由紀夫. Mod.9Cr-1Mo鋼溶接継手のクリープ損傷挙動. 第45回高温強度シンポジウム 前刷集 2007, 39-43
  2. TABUCHI, Masaaki, HONGO, Hiromichi, Yongkui Li, WATANABE, Takashi, SAWADA, Kota. Damage and life assessment of high Cr steel weldment. Proc. of 6th NIMS-MPA-IfW Workshop 2007, 78-85
  3. LI, Yongkui, HONGO, Hiromichi, TABUCHI, Masaaki, Yukio Takahashi, Yoshio Monma. Creep Damage Evaluation for Thick Welded Joint of Mod.9Cr-1Mo steel. Proceedings of 6th Japan-China Bilateral Symposium on High Temperature Strength of Materials 2007, 149-154
  4. YAMAZAKI, Masayoshi, HONGO, Hiromichi, WATANABE, Takashi. Rupture behavior of Multi-pass welded joints of heat resistant steel subjected to creep loading. Proceedings of PVP2007 (CD) 2007, 1-7
  5. TABUCHI, Masaaki, HONGO, Hiromichi, LI, Yongkui, WATANABE, Takashi, Yukio Takahashi. EVALUATION OF MICROSTRUCTURES AND CREEP DAMAGES IN HAZ OF P91 STEEL WELDMENT. Proceedings of PVP2007 2007 ASME Pressure Vessels and Piping Division Conference 2007, 26495-1-26495-6
  6. YAMAZAKI, Masayoshi, WATANABE, Takashi, HONGO, Hiromichi, TABUCHI, Masaaki. Creep Rupture Properties of Welded Joints of Heat Resistant Steels. Challenges of Power Engineering and EnvironmentProceeding of ICOPE 2007 2007, 1044-1048
2004
  1. HONGO, Hiromichi, YAMAZAKI, Masayoshi, WATANABE, Takashi, TANABE, Tatsuhiko, TABUCHI, Masaaki, 門馬義雄. EVALUATION OF CREEP PROPERTIES FOR 316FR STEEL THICK PLATE WELDMENT USING MINIATURE CREEP SPECIMEN. Proc. 5th China-Japan Bilateral Symposium on High Temperature Strength of Materials 2004, 80-85
  2. TABUCHI, Masaaki, KONDO, MASAYUKI, WATANABE, Takashi, HONGO, Hiromichi, YIN, Fuxing, ABE, Fujio. Improvement of TypeIV Cracking Resistance of 9Cr Heat Resisting Steel Weldment by Boron Addition. Proc. 5th China-Japan Bilateral Symposium on High Temperature Strength of Materials 2004, 240-245
  3. SHAJU, ALBERT, 松井正数, KUBO, Kiyoshi, HONGO, Hiromichi, TABUCHI, Masaaki. Study of TypeIV Cracking in Ferritic Steel Welds Using HAZs Simulated by Heat Treatment and Gleeble. Thermo-Mechanical Simulation and Processing of Steels 2004, 377-390
  4. KIMURA, Kazuhiro, WATANABE, Takashi, HONGO, Hiromichi, YAMAZAKI, Masayoshi, KINUGAWA, Junichi, 入江. Improvement in Long-term Creep Strength of Cr-Mo Steel Welded Joint by a Full Annealing PWHT. Proc. IIW 2004 OSAKA 2004, -

口頭発表 TSV

2018
  1. 松永 哲也, 本郷 宏通, 田淵 正明, ソイシ マオウイア, 佐原 亮二. B添加9Cr-1Mo鋼におけるM23C6の安定性に対する組成と構造の影響. 第56回高温強度シンポジウム. 2018
  2. 松永 哲也, 本郷 宏通, 田淵 正明, 伊藤 勉, 御手洗 容子. 低温領域における純チタンのクリープ挙動. 第6回「チタン若手研究者・技術者交流会」. 2018
  3. 松永 哲也, 本郷 宏通, 田淵 正明, ソイシ マオウイア, 佐原 亮二. ボロン添加9%クロムフェライト鋼中のM23C6析出物の安定性. 日本鉄鋼協会第176回秋季講演大会. 2018
  4. 松永哲也, SOUISSIMaaouia, 佐原亮二, 本郷宏通, 田淵正明, Wei Zhang, Michael J Mills. Creep Property of Boron added 9Cr Heat Resistant Steels after Welding. THERMEC’2018. 2018
  5. 田淵 正明, 本郷 宏通, 松永 哲也. Gr.91鋼溶接継手の長時間クリープ強度と破壊. 日本材料強度学会 総会学術講演会. 2018
  6. 松永 哲也, 本郷 宏通, 田淵 正明, ソイシ マオウイア, 佐原 亮二. ボロンを含んだ9Cr-1Mo鋼のM23C6析出物の成長挙動. 第67期通常総会・学術講演会. 2018
  7. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SOUISSI, Maaouia, SAHARA, Ryoji, Wei Zhang, Michael J Mills. Stability of M23C6 precipitate in 9Cr heat resistant steel. MINS-NU workshop. 2018
  8. 松永 哲也, 本郷 宏通, 田淵 正明. ジルカロイ4の特異な高温クリープ挙動. 2018年春季講演大会. 2018
2015
  1. 松永 哲也, 本郷 宏通, 田淵 正明, 佐原 亮二. 9Cr鋼における細粒熱影響部形成の抑制に対するボロンの効果. 第53回高温強度シンポジウム. 2015
  2. 松永 哲也, 本郷 宏通, 田淵 正明, 佐原 亮二. 9%クロムフェライト鋼におけるボロン添加による溶接組織変化. 第170回秋季講演大会. 2015
  3. 田淵 正明, 本郷 宏通, 松永 哲也, 阿部 冨士雄. A-USCボイラ用異材溶接継手のクリープ強度. 日本機械学会 2015年度年次大会. 2015
  4. SAHARA, Ryoji, MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki. Theoretical investigation of stabilizing mechanism by boron in bcc iron through (Fe,Cr)23(C,B)6 precipitates. Psi-k 2015. 2015
  5. 松永 哲也, 本郷 宏通, 田淵 正明, 佐原 亮二. 9Cr鋼の溶接熱影響部に対するボロンと窒素の影響. 高温変形の組織ダイナミクス研究会. 2015
  6. MATSUNAGA, Tetsuya, HONGO, Hiromichi, TABUCHI, Masaaki, SAHARA, Ryoji. Microstructure of Welded 9 Pct Chromium Steel with Boron. CREEP 2015. 2015
  7. 松永 哲也, 本郷 宏通, 田淵 正明. 9Cr鋼溶接部における細粒HAZ組織形成の抑制に対するボロンの効果. 第64期通常総会・学術講演会. 2015
  8. 佐原 亮二, 松永 哲也, 本郷 宏通, 田淵 正明. 第一原理計算によるbcc Fe/M23C6界面の電子状態および安定性. 日本金属学会2015年春期大会. 2015
  9. 松永 哲也, 本郷 宏通, 田淵 正明, 佐原 亮二. 9Crフェライト系耐熱鋼溶接部に対するボロンの影響. 2015年春期(第156回)講演大会. 2015
2014
  1. 松永 哲也, 本郷 宏通, 田淵 正明, 佐藤裕樹, 阿部弘亨. ジルカロイ4のクリープに対する固溶水素の影響. 第52回高温強度シンポジウム. 2014
  2. 大谷俊博, 草彅祐紀, 石井優, 田淵 正明, 本郷 宏通, 平尾雅彦. 高Cr 鋼溶接継手部のクリープ損傷中の非線形超音波の変化. 日本材料学会 第63期学術講演会. 2014
  3. 村瀬 義治, 山本 徳和, 緒形 俊夫, 篠原 正, 田原 晃, 本郷 宏通. プロトン照射下における304鋼溶接材の高温水中酸化皮膜形成. 日本金属学会2014年春期(第154回)講演大会. 2014
2012
  1. 田淵 正明, 本郷 宏通, 阿部 冨士雄. A-USCボイラ材料の異材溶接部のクリープ強度. 第56回日本学術会議材料工学連合講演会. 2012
2009
  1. 本郷 宏通, 田淵 正明, 渡部 隆, 高橋由紀夫. P122鋼溶接継手のType-IV損傷挙動. 第58期通常総会・学術講演会. 2009
2008
  1. 田淵 正明, 本郷 宏通, 渡部 隆, 高橋由紀夫. 高Cr耐熱鋼の溶接部のクリープ強度に及ぼすボロンの影響. 日本鉄鋼協会第156回秋季講演大会. 2008
  2. 本郷 宏通, 田淵 正明, 高橋由起夫. 高Cr鋼溶接継手のType-IV損傷と組織. M&M2008材料力学カンファレンス. 2008
  3. 田淵 正明, 本郷 宏通, 渡部 隆. 高クロム耐熱鋼溶接継手のクリープ損傷評価. 日本材料学会 第57期学術講演会. 2008
  4. LI, Yongkui, HONGO, Hiromichi, TABUCHI, Masaaki, Yoshio Monma. Development of Creep voids in Fine-Grained Heat Affected Zone of Mod.9Cr-1Mo Steel Welded Joint. 日本鉄鋼協会第155回春季講演大会. 2008

特許 TSV

登録特許
    公開特許
    1. 特開2009025294号 熱電対とその測温接点形成方法 (2009)
    外国特許
    1. No. US20020170634A1 Postweld heat treatment process of carbon steel and low alloy steel (2002)

    ▲ページトップへ移動