publication_type	publication_year	number	author	title	journal_title	volume_number	issue_number	start_page	end_page	doi	reported_at
Paper	2022	1	Kenta Goto, Kimiyoshi Naito, Keiichi Shirasu, Ikumu Watanabe		SN Applied Sciences	4	11			https://doi.org/10.1007/s42452-022-05183-w	2024-04-20 00:20:48 +0900
Paper	2022	2	Kenta Goto, Ayako Ikeda, Toshio Osada, Ikumu Watanabe, Kyoko Kawagishi, Takahito Ohmura	High-throughput evaluation of stress–strain relationships in Ni–Co–Cr ternary systems via indentation testing of diffusion couples	Journal of Alloys and Compounds	910		164868		https://doi.org/10.1016/j.jallcom.2022.164868	2024-04-20 00:20:48 +0900
Paper	2021	1	Reon Ando, Takashi Matsuno, Tomoko Matsuda, Norio Yamashita, Hideo Yokota, Kenta Goto, Ikumu Watanabe	Analysis of Nano-hardness Distribution Near the Ferrite-martensite Interface in a Dual Phase Steel with Factorization of Its Scattering Behavior	ISIJ International	61	1	473	480	https://doi.org/10.2355/isijinternational.isijint-2020-546	2024-04-20 00:20:48 +0900
Paper	2021	2	Fei Shen Ong, Bastian Rheingans, Kenta Goto, Hirobumi Tobe, Takahito Ohmura, Jolanta Janczak-Rusch, Eiichi Sato	Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: The effects of brazing zone’s elasto-plasticity and ceramics' intrinsic properties	Journal of the European Ceramic Society	41	13	6319	6329	https://doi.org/10.1016/j.jeurceramsoc.2021.06.038	2024-04-20 00:20:48 +0900
Paper	2021	3	Jovana Ruzic, Kenta Goto, Ikumu Watanabe, Toshio Osada, Liberty Wu, Takahito Ohmura	Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys	Materials Science and Engineering: A	818		141439		https://doi.org/10.1016/j.msea.2021.141439	2024-04-20 00:20:48 +0900
Paper	2021	4	Ayako Ikeda, Kenta Goto, Toshio Osada, Ikumu Watanabe, Kyoko Kawagishi	High-throughput mapping method for mechanical properties, oxidation resistance, and phase stability in Ni-based superalloys using composition-graded unidirectional solidified alloys	Scripta Materialia	193		91	96	https://doi.org/10.1016/j.scriptamat.2020.10.043	2024-04-20 00:20:48 +0900
Paper	2021	5	Hongxin Wang, Han Zhang, Bo Da, Dabao Lu, Ryo Tamura, Kenta Goto, Ikumu Watanabe, Daisuke Fujita, Nobutaka Hanagata, Junko Kano, Tomoki Nakagawa, Masayuki Noguchi	Mechanomics Biomarker for Cancer Cells Unidentifiable through Morphology and Elastic Modulus	Nano Letters	21	3	1538	1545	https://doi.org/10.1021/acs.nanolett.1c00003	2024-04-20 00:20:48 +0900
Paper	2021	6	Ta-Te Chen, Ikumu Watanabe, Dayuan Liu, Kenta Goto	Data-driven estimation of plastic properties of alloys using neighboring indentation test	Science and Technology of Advanced Materials: Methods	1	1	143	151	https://doi.org/10.1080/27660400.2021.1959838	2024-04-20 00:20:48 +0900
Paper	2020	1	安藤 玲音, 松野 崇, 松田 知子, 山下 典理男, 横田 秀夫, 後藤 健太, 渡邊 育夢	Dual Phase鋼におけるフェライト・マルテンサイト界面近傍のナノ硬さ分布とそのバラつき因子	鉄と鋼	106	12	944	952	https://doi.org/10.2355/tetsutohagane.tetsu-2020-037	2024-04-20 00:20:48 +0900
Paper	2020	2	Yoshihiro Yamauchi, Sadaki Samitsu, Kenta Goto, Masayuki Takeuchi	Bottlebrush polymer-reinforced transparent multiphase plastics with enhanced thermal stability	Chemical Communications	56	93	14641	14644	https://doi.org/10.1039/d0cc06769e	2024-04-20 00:20:48 +0900
Paper	2020	3	Keiichi Shirasu, Kenta Goto, Kimiyoshi Naito	Microstructure-elastic property relationships in carbon fibers: A nanoindentation study	Composites Part B: Engineering	200		108342		https://doi.org/10.1016/j.compositesb.2020.108342	2024-04-20 00:20:48 +0900
Paper	2020	4	Kenta Goto, Ikumu Watanabe, Takahito Ohmura	Inverse estimation approach for elastoplastic properties using the load-displacement curve and pile-up topography of a single Berkovich indentation	Materials & Design	194		108925		https://doi.org/10.1016/j.matdes.2020.108925	2024-04-20 00:20:48 +0900
Paper	2020	5	Takashi Matsuno, Reon Ando, Norio Yamashita, Hideo Yokota, Kenta Goto, Ikumu Watanabe	Analysis of preliminary local hardening close to the ferrite–martensite interface in dual-phase steel by a combination of finite element simulation and nanoindentation test	International Journal of Mechanical Sciences	180		105663		https://doi.org/10.1016/j.ijmecsci.2020.105663	2024-04-20 00:20:48 +0900
Paper	2020	6	Hongxin Wang, Han Zhang, Kenta Goto, Ikumu Watanabe, Hideaki Kitazawa, Masamichi Kawai, Hiroaki Mamiya, Daisuke Fujita	Stress mapping reveals extrinsic toughening of brittle carbon fiber in polymer matrix	Science and Technology of Advanced Materials	21	1	267	277	https://doi.org/10.1080/14686996.2020.1752114	2024-04-20 00:20:48 +0900
Paper	2020	7	Ikumu Watanabe, Zhengzhong Sun, Houichi Kitano, Kenta Goto	Multiscale analysis of mechanical behavior of multilayer steel structures fabricated by wire and arc additive manufacturing	Science and Technology of Advanced Materials	21	1	461	470	https://doi.org/10.1080/14686996.2020.1788908	2024-04-20 00:20:48 +0900
Paper	2019	1	Jovana Ruzic, Ikumu Watanabe, Kenta Goto, Takahito Ohmura	Nano-Indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere	MATERIALS TRANSACTIONS	60	8	1411	1415	https://doi.org/10.2320/matertrans.md201909	2024-04-20 00:20:48 +0900
Paper	2019	2	Hongxin Wang, Han Zhang, Daiming Tang, Kenta Goto, Ikumu Watanabe, Hideaki Kitazawa, Masamichi Kawai, Hiroaki Mamiya, Daisuke Fujita	Stress dependence of indentation modulus for carbon fiber in polymer composite	Science and Technology of Advanced Materials	20	1	412	420	https://doi.org/10.1080/14686996.2019.1600202	2024-04-20 00:20:48 +0900
Paper	2019	3	Kenta Goto, Ikumu Watanabe, Takahito Ohmura	Determining suitable parameters for inverse estimation of plastic properties based on indentation marks	International Journal of Plasticity	116		81	90	https://doi.org/10.1016/j.ijplas.2018.12.007	2024-04-20 00:20:48 +0900