| 542 article(s) found. Sorted by publication dates. (Help) | |
|---|
| Hideaki Nishikawa, Yoshiyuki Furuya, Toshio Osada, Satoshi Utada, Ayako Ikeda, Motoki Okuno, Daisuke Nagahama. Validation of the sensitivity and accuracy of ultrasonic inspection of HGN200 superalloy: Detection of all detrimental microscopic inclusions and their effects on fatigue properties. Materials Science and Engineering: A. 953 (2026) 149682 10.1016/j.msea.2025.149682 | |
| Hidetoshi Somekawa, Alok Singh. Tensile response at dynamic strain rates in fine-grained Mg and Mg binary alloys. Materials Science and Engineering: A. 953 (2026) 149745 10.1016/j.msea.2026.149745 | |
| Xiaodong Lan, Kazuho Okada, Ivan Gutierrez-Urrutia, Akinobu Shibata. Effects of prior austenite grain size on hydrogen embrittlement behavior in high-strength martensitic steel. Materials Science and Engineering: A. 950 (2026) 149539 10.1016/j.msea.2025.149539 Open Access | |
| Fumiyoshi Yoshinaka, Takahiro Sawaguchi, Tomoya Nagira, Susumu Takamori, Satoshi Emura, Yasuhiko Inoue. Low cycle fatigue and microstructures of Fe–15Mn–11Cr–7.5Ni–4Si alloy. Materials Science and Engineering: A. 949 (2026) 149457 10.1016/j.msea.2025.149457 | |
| Fabien Briffod, Takayuki Shiraiwa, Kyohei Hayakawa, Kenta Suzuki, Takanori Karato, Manabu Enoki. Fatigue crack initiation in a directionally solidified Ni-based superalloy: Effect of non-metallic inclusions. Materials Science and Engineering: A. 949 (2026) 149475 10.1016/j.msea.2025.149475 | |
| Rie Nishio, Takuo Umetani, Yasuhiko Nakamura, Taisuke T. Sasaki, Akinobu Shibata. Effect of cooling rate after high-temperature heating on the ductility of 19Cr-0.020C-0.015N-0.4Nb stabilized ferritic stainless cast steel. Materials Science and Engineering: A. 945 (2025) 148952 10.1016/j.msea.2025.148952 Open Access | |
| Takuma Saito, Hiroshi Harada, Makoto Osawa, Tadaharu Yokokawa, Kyoko Kawagishi, Shinsuke Suzuki. Elastic moduli of 6th generation Ni-base single crystal superalloy TMS-238 and its tie-lined γ and γ′ phases. Materials Science and Engineering: A. 941 (2025) 148410 10.1016/j.msea.2025.148410 Open Access | |
| Yo Tomota, Hongxing Li, Noriyuki Tsuchida, Wu Gong, Stefanus Harjo, Takahito Ohmura. Grain size dependence of intergranular lattice strain generated by plastic deformation in ferritic steel. Materials Science and Engineering: A. 946 (2025) 149136 10.1016/j.msea.2025.149136 Open Access | |
| Yuma Geshi, Tomoko Hirayama, Hidetoshi Somekawa, Takashi Matsuoka. Effect of polymer dispersion on mechanical properties for extruded Mg matrix composites. Materials Science and Engineering: A. 948 (2025) 149351 10.1016/j.msea.2025.149351 | |
| S.J. Liang, T. Yoshino, R. Matusmoto, R. Sahara, Y. Toda, S. Matsunaga, G. Miyamoto, Y. Yamabe-Mitarai. Deformation mechanisms of hexagonal close-packed-multi-principal element alloys (HCP-MPEAs) with equiaxed structures. Materials Science and Engineering: A. 929 (2025) 148143 10.1016/j.msea.2025.148143 Open Access | |
